C:\Windows\Minidump\103010-19500-01.dmp

Similar Questions

• Windows 7, get this blue screen error message, what should I do to remedy? C:\Windows\Minidump\100312-29827-01.dmp

  Need help, my computer hangs at this message

  Windows 7, get this blue screen error message, what should I do to remedy? C:\Windows\Minidump\100312-29827-01.dmp

  Hello

  1. when exactly do you get this error message?

  2 are you able to start in the Office?

  3 have there been recent changes to the computer before the show?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Resolve stop (blue screen) errors in Windows 7: http://windows.microsoft.com/en-us/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

  Hope this information is useful.

• aid to the C:\Windows\Minidump\040413-14406-01.dmp

  I have a problem with Windows RT on the Surface, closing the table it restarts it self.
  can I open a session and get this.
  C:\Windows\Minidump\040413-14406-01.dmp
  C:\Users\bship_000\AppData\Local\Temp\WER-47265-0.SysData.XML
  C:\Windows\MEMORY. DMP

  Can someone help me with this problem?

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  To provide the proper resolution, that I would need more information on your side.
  Did you the latest changes on the computer before this problem?

  Method 1:
  I suggest you to change the power plan settings and check if it helps.

  a. slide or press the Start button and click on Power Options.
  b. click "choose the power button.
  c. under parameters of start button / stop, expand the menu drop down.
  d. click stop.
  e. -press save changes.

  Check whether the problem is resolved.

  Method 2:
  If the problem persists, I suggest you run the disk check and check if it helps.

  drag to the right to go to the bar of charms.
  b. tap search and type command prompt.
  c. in the results left touch where it says guest and sweep upwards to bring up the options menu at the bottom of the screen.
  d. tap run as administrator.
  e. in the cursor flashing, type the following:

  Chkdsk /f /r

  See the article for more information.

  How stop (turn off) my PC?
  http://Windows.Microsoft.com/is-is/Windows-8/how-shut-down-turn-off-PC

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you.

• C:\Windows\Minidump\Mini082813-01.dmp C:\Users\Angel\AppData\Local\Temp\WER-496863-0.sysdata.xml C:\Users\Angel\AppData\Local\Temp\WERA939.tmp.version.txt

  C:\Windows\Minidump\Mini082813-01.dmp
  C:\Users\Angel\AppData\Local\Temp\WER-496863-0.SysData.XML
  C:\Users\Angel\AppData\Local\Temp\WERA939.tmp.version.txt

  Jane doe00

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

  * Zip up the copy (compress)

  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.

  http://www.WikiHow.com/use-SkyDrive

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.

  * On the Advanced tab, click Startup and recovery... Settings button.

  * Make sure that automatically restart is unchecked.

  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).

  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.

  * OK your way out.

  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32

  Go to 'file', 'save' and download the PDF is saved with the DMP

  System specs are extremely useful then please include everything you know.

  
  

  Blue screen view and that crashed are often wrong and should only be used in case of emergency...

  
  

  You can learn more about BSOD here

  You will learn how to test your memory here 

  
  

  
  

  Team Zigzag3143.com  

• c;windows\minidump\mini09513-09.dmp

  What is c? I have to crash on my computer

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

  * Zip up the copy (compress)

  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.

  http://www.WikiHow.com/use-SkyDrive

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.

  * On the Advanced tab, click Startup and recovery... Settings button.

  * Make sure that automatically restart is unchecked.

  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).

  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.

  * OK your way out.

  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32

  Go to 'file', 'save' and download the PDF is saved with the DMP

  System specs are extremely useful then please include everything you know.

  
  

  Blue screen view and that crashed are often wrong and should only be used in case of emergency...

  
  

  You can learn more about BSOD here

  You will learn how to test your memory here 

  An effective question gets help more quick read how here

  
  

  
  

  Team Zigzag3143.com  

• C:\Windows\Minidump\Mini060210-01.dmp

  I get this mess...

  "Windows has recovered from an unexpected shutdown.

  How can I get rid of this have looked for alternatives in the drop-down window and he says he can't fins questions?

  It was the first time that you got a crash/BSOD-blue screen bugcheck?  Were there of the last changes made to the system - a new hardware or software added or updated?

  You can download the contents of c:\windows\minidump on your SkyDrive?

  General to deal with the bluescreens indications:

  Consider running chkdsk on all partitions.  Leave complete chkdsk on each partition and see if that helps.

  Also consider running SFC/scannow.

  It may be useful to use the driver verifier.  To activate the... Driver Verifier start-> verifier.exe-> OK-> create standard settings - > then-> the names of the drivers select in a list-> next-> sort by provider-> select all non-Microsoft drivers-> finish and OK your way out of the dialog box.

  Then restart and use the system as you normally and wait for a problem.  In case the system does not completely start after activation of the Verifier, boot mode safe and run driver verifier and tell him to remove the changes.

  Wait for a bugcheck occur after you enable the auditor as described and then download it.

  If you start in safe mode, do you still feel bugs? What if you do a clean boot, or boot device?

  Consider the memory with memtest86 or Windows Memory Diagnostic test. Note that memory that pass the tests isn't necessarily good memory - he not only failed a review.  Examine systematically to eliminate the system RAM - run with a few modules for awhile and see how things are going. Then try the other modules.

  Other common suggestions include ensuring drivers are up to date (including video drivers), but also to ensure that you use the latest version of the BIOS.

• Help! read my windows minidump

  my windows xp sp3 pc restarts just trying to do a virus scan or other activities. It gives me a minidump and when it restarts itself, he said "my computer has recovered from a serious accident. Can someone please look at the attached here minidump and tell me what they think, what is the problem. Is there a tool to read the minidump? Thanks in advance for your help.

  I have provided the link to the minidump as I couldn't know how to attach a file here:

  www.Megaupload.com/?d=HCOA7ON4

  Thank you.

  Tharunam

  Hello

  If looked at the minidump - BSOD code bug 0x100000D1 check - file that is probably caused by:OAmon.sys (OAmon + 1415)
  OAmon.sys - is related to Online Armor Security Suite (11 / 01 / 2011)

  So first - try to uninstall this program.

  LC

• BlueScreen: usb bug error code

  Hello

  I get random bluescreen that occur with errors USB_BUG_CODE.  I dug it in Event Viewer:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 2057

  More information about the problem:
  BCCode: fe
  BCP1: 0000000000000005
  BCP2: FFFFFA800FCE51A0
  BCP3: 0000000080863B3C
  BCP4: FFFFFA800FA5CC50
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  The computer was restarted after a bugcheck. The bugcheck was: 0x000000fe (0xfffffa800fce51a0, 0x0000000080863b3c, 0 x 0000000000000005, 0xfffffa800fa5cc50). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 010411-20919-01.

  Anyone know if it's a software or a hardware error?  If anyone knows how to give a sense of the dump files that would be great - thanks

  JEM

  Motherboard: with controller DP55SB intel core i7 870, Marvel

  Hello

  Are you overclocking? If so you should stop doing that until these issues are resolved.

  Results verified with BlueScreenView DumpCHK and WinDBG.

  Be sure and check these KB articles and other methods in solving the problems.

  All the Bug + controls were FE.

  List of crash - created using BlueScreenView

  Dump File	Crash Time	Size of the dump file	Bug Check String	Bug check code	Parameter 1	Parameter 2	Parameter 3	Parameter 4	Caused by the driver	Caused by address	Description of the file	Name of the product	Company	Version of the file	Processor	Name of the computer	Full Path	Number of processors	Major version	Minor version
  010611-22058 - 01.dmp	2011-01-06 12:34:26 AM	343 544	BUGCODE_USB_DRIVER	0x000000FE	00000000'00000005	fffffa80'0fc901a0	00000000' 80863b3c	fffffa80'106e7c50	USBPORT. SYS	USBPORT. SYS + 2de4e	Driver Port USB 1.1 & 2.0	Microsoft® Windows® operating system	Microsoft Corporation	6.0.6002.18005 (lh_sp2rtm.090410 - 1830)	x 64		C:\Windows\Minidump\010611-22058-01.dmp	8	15	7600
  010411-20919 - 01.dmp	04/01/2011 16:30:14	343 360	BUGCODE_USB_DRIVER	0x000000FE	00000000'00000005	fffffa80'0fce51a0	00000000' 80863b3c	fffffa80'0fa5cc50	USBPORT. SYS	USBPORT. SYS + 2de4e	Driver Port USB 1.1 & 2.0	Microsoft® Windows® operating system	Microsoft Corporation	6.0.6002.18005 (lh_sp2rtm.090410 - 1830)	x 64		C:\Windows\Minidump\010411-20919-01.dmp	8	15	7600
  010411-19500 - 01.dmp	2011-01-04 01:44:23	343 576	BUGCODE_USB_DRIVER	0x000000FE	00000000'00000005	fffffa80'0fd181a0	00000000' 80863b3c	fffffa80'10b498e0	USBPORT. SYS	USBPORT. SYS + 2de4e	Driver Port USB 1.1 & 2.0	Microsoft® Windows® operating system	Microsoft Corporation	6.0.6002.18005 (lh_sp2rtm.090410 - 1830)	x 64		C:\Windows\Minidump\010411-19500-01.dmp	8	15	7600

  The CAUSE of all three was usbehci.sys which is a component of Windows that means something
  otherwise it led into error.

  One of the minidumps involves nvlddmkm.sys which is part of the Nvidia video/display driver.
  This could have a roll in the 3 so I would look for updated driver Nvidia if yours is 8/10.
  2010. There may be more recent and specific driver could have problems. Check with support from Nvidia,
  their drivers and ask in their forums known issues.

  1. BIOS update, low and other chipset drivers drivers available from Intel for the DP55SB.

  2 update drivers for Nvidia display/video and ask their forums and support for known issues.

  3 speedfan.sys on the system version is very old (2006) so I want to uninstall it.

  4 are looking for an update of ALSysIO64.sys which is part of CoolIt - I don't know if it's a
  an integral part of the installation you have - liquid cooling - however if not I would like to uninstall - if your
  the installer it needs and then look for updates and check with their support for known problems.

  5. check the updates for the Thor Marvell SATA/IDE controller if available (via Intel).

  =====================

  Intel DP55SB
  http://www.Intel.com/products/desktop/motherboards/DP55SB/DP55SB-overview.htm

  Intel® Desktop Board DP55SB - tools and software
  http://www.Intel.com/products/desktop/motherboards/DP55SB/DP55SB-tools.htm

  Update BIOS - 16/11/2010
  http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%c2%ae+5+Series+Chipset+Boards&ProductProduct=Intel%c2%ae+Desktop+Board+DP55SB&OSVersion=OS+Independent

  Driver updates - check to see if you need a
  http://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&ProductFamily=desktop+boards&ProductLine=Intel%C2%AE+5+series+chipset+boards&ProductProduct=Intel%C2%AE+Desktop+Board+DP55SB

  ---------------

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  ---------------

  CoolIt Systems
  http://www.coolitsystems.com/

  ---------------

  Refer to the previous problems.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• "Windows has recovered from an unexpected shutdown" minidump (BSOD) Windows 7 file

  I had trouble with the BSOD Windows 8.1 and 10 so I went back to windows 7. It has been working well for some time however, when I play a video game it crashes. This is the first time since that I resorted to windows 7. Unlike Windows 8.1 and 10 I can boot into normal mode so I can continue to do what I want to do but I'd like to solve this problem, if it is severe.

  Here is the information of the accident.

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033

  More information about the problem:
  BCCode: 1a
  BCP1: 0000000000041790
  BCP2: FFFFFA80009C3A50
  BCP3: 000000000000FFFF
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\062616-26941-01.dmp
  C:\Users\Brendan\AppData\Local\Temp\WER-55520-0.SysData.XML

  If someone could please answer and show the steps to solve this problem that would be greatly appreciated.

  Thank you.

  Error checking 1A, {41284, 1 c 560001, 3fe0, fffff70001080000}

  Probably caused by: ntkrnlmp.exe (nt! FNODOBFM: 'string' + 4ac3)

  No drivers have been appointed in accidents, so please activate the driver verifier:

  Enable Driver Verifier:

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/driver-verifier-tracking-down-a-mis-behaving/f5cb4faf-556b-4B6D-95b3-c48669e4c983

  Make a memory Test:

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/BSOD-memory-problems-test-easily-and-completely/21c3f63f-F570-4522-b2ef-ecc7b7ff6461

  Download the new landfills when you get Driver_Verifier_detected_voilation

• Windows 7 DMP files included BSOD Please Help!

  For last 1-2 weeks have BSOD on my pc. I reinstalled Windows 7 Home Premium several times. A few days after each re - install Win 7 I start receving BSOD. I formatted my disk, partitions, etc. I just need to solve these BSOD. I've included below DMP and Dump WhoCrashed logs files. In these papers he suggests that my drivers could be the cause of crashes of theses. Let me know what is wrong in the comments below.

  Thank you

  Mike Read

  DMP files:
  https://onedrive.live.com/redir?RESID=40F0655702713F9A%21176

  Data sheet:
  Motherboard:
  -All Series, ASUS, ASUSTeK COMPUTER Inc., Z87.-k.
  CPU:
  -GenuineIntel Intel (r) Core i5 - 4670 K CPU @ 3.40 GHz Intel586
  Graphics card:
  -GeForce GTX 660 ti
  RAM:
  -8 GB company unknown.<-------Ran memtest="" 86="" on="" this="" ram,="" no="">
  Hardrives:
  -C = disk 128 GB SanDisk SSD drive
  -Drive(Gaming/storage) E = TOSHIBA 2 to 7200 RPM 64 MB cache

  WhoCrashed reports:

  Saturday, may 10, 2014 3:55:02 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-5023-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0xA (0xFFFFF6FCC8078408, 0xFFFFF80002CE089A, 0x2, 0x0)
  Error: IRQL_NOT_LESS_OR_EQUAL
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 3:36:38 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-10405-01.dmp
  This was probably caused by the following module: ntfs.sys (Ntfs + 0 x 4211)
  Verification of error code: 0 x 24 (0xFFFFF8800B088068, 0xFFFFF8800B0878C0, 0x1904FB, 0xFFFFF80002DBEB05)
  Error: NTFS_FILE_SYSTEM
  file path: C:\Windows\system32\drivers\ntfs.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT file system driver
  Bug control description: This indicates there is a problem in the NTFS file system.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Saturday, may 10, 2014 3:33:49 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-28782-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Verification of error code: 0 x 34 (0x55F, 0xFFFFFFFFC0000420, 0 x 0 0 x 0)
  Error: CACHE_MANAGER
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a problem has occurred in the file system cache manager.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 3:29:40 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-5912-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1A (0xFFFFFA800339B0A0, 41790, 0 x 0 x 0, 0xFFFF)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 2:49:28 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-54974-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1A (0xFFFFFA80033A5C30, 41790, 0 x 0 x 0, 0xFFFF)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 2:40:44 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-8829-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1A (0xFFFFFA8003335C10, 41790, 0 x 0 x 0, 0xFFFF)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 2:37:22 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-5506-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80002ABDAC5, 0xFFFFF88009801810, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 2:32:51 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-7753-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1A (0xFFFFFA8003389BE0, 41790, 0 x 0 x 0, 0xFFFF)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Hello

  We have three controls compatible bug:

  MEMORY_MANAGEMENT (1A)

  This indicates that an error occurred serious memory management.

  Error checking 1A, {41790, fffffa800339b0a0, ffff, 0}

  - Parameter 1 of the bug check is 41790 indicating a page table was corrupted.
  

  3: kd > dt nt! _MMPFN fffffa800339b0a0
  + 0 x 000 u1:
  + 0 x 008-u2:
  + 0 x 010 PteAddress: 0xfffff6fb'40000050 _MMPTE
  + 0 x 010 VolatilePteAddress: 0xfffff6fb'40000050 empty
  + lock 0 x 010: 0n1073741904
  + 0 x 010 PteLong: 0xfffff6fb'40000050
  + 0 x 018 u3:
     + 0x01c UsedPageTableEntries: 0xffff
  + 0x01e VaType: 0 ''
  + 0x01f ViewCount: 0 "
  + 0 x 020 OriginalPte: _MMPTE
  + 0 x 020 AweReferenceCount: 0n128
  + 0 x 028 u4:

  UPTE has fallen below zero, which implies usually a driver caused the corruption (or faulty RAM memory).

  System_service_exception (3B)

  This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  
  This error has been linked to the excessive use of expanded memory and resulting from user mode graphics drivers enjambment and passing data incorrect of the kernel code.

  Bugcheck 3B, {c0000005, fffff80002abdac5, fffff88009801810, 0}

  3: kd > fffff80002abdac5 ln
  (fffff800'02abdac5)   nt! ExpInterlockedPopEntrySListFault16 |  (fffff800'02abdad0) nt! ExpInterlockedPopEntrySListEnd16

  The exception is produced in nt! ExpInterlockedPopEntrySListFault16.

  PAGE_FAULT_IN_NONPAGED_AREA (50)

  This indicates that invalid system memory was referenced.

  Bug control 0 x 50 usually occurs after the installation of a faulty hardware or installation failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  ---------------------

  Run Memtest for NO LESS than ~ 8 going on (several hours):

  Memtest86 +:

  Download Memtest86 + here:

  http://www.memtest.org/

  Which should I download?

  You can either download the ISO pre-built you want to burn to a CD and then boot from the CD, or you can download the automatic installer of the USB. What this will do is format your USB drive, make a boot device and then install the necessary files. Both do the same job, it's just you that you choose, or you have available (be it CD or USB).

  Note that some older generation motherboards do not support USB boot, your only option is CD (or floppy if you really wanted to).

  How Memtest works:

  Memtest86 writes a series of test patterns for most of the addresses of memory, reads the written data and compares it to find errors.

  The default pass is 9 different tests, varying in the modes of access and test data. A tenth test, bland, is selectable in the menu. He wrote all the memory with zeros, then sleeps 90 minutes before checking to see if the bits have changed (perhaps because of refresh problems). This is repeated with all those for a total time of 3 hours by pass.

  Many chipsets can report RAM speed and timings by SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclockee, Memtest86 can test that memory is free of error with these faster settings.

  Some hardware is able to report the status of the "PAT" (PAT: active or PAT: disabled). This is a reference to the Intel performance acceleration technology; There may be the BIOS settings that affect this aspect of memory synchronization.

  This information, if it is available for the program, can be displayed via a menu option.

  Other questions, they can most likely be answered by reading this excellent guide here:

  http://Forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

  Kind regards

  Patrick

• BCCode 9f (Minidump included). Windows 7 x 64

  Hello
  I have a new laptop, ASUS N53SM, with all the drivers updated day and the latest OS updates, last night during the reboot, I met with the blue screen that I describe below. I have attached the minidump. Thanks in advance for any help!
  Mariano. -.
  Event: BlueScreen
  OS version: 6.1.7601.2.1.0.768.2 (Windows 7 Home Basic x 64)
  Regional ID: 11274
  Additional information of problem:
  BCCode: 9f
  BCP1: 0000000000000003
  BCP2: FFFFFA80061AD060
  BCP3: FFFFF80000B9C3D8
  BCP4: FFFFFA800B75E690
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1
  Minidump attached on SkyDrive:
  C:\Windows\Minidump\102912-37190-01.dmp--->
  https://SkyDrive.live.com/embed?CID=1F9E28AED190BDB6&RESID=1F9E28AED190BDB6%21180&AuthKey=AOjyPi5BKib54aM

  Hello

  Since this is a new computer with the support of ASUStek check and the seller. As OEM ASUStek
  is responsible for the functioning Windows and hardware. Keep in mind
  do more you more they will claim that it is something you have done. Added that, even
  If you are somehow able to solve the problem, that it must always be documented in case
  other issues on the road.

  =========================================================

  If you want to solve the problem (and you should contact ASUStek and the seller).

  Results verified BlueScreenView WinDBG / DumpCHK.
  
  The Bug_Check was 9F pci.sys CAUSE which is a component of Windows, which means
  Another thing he has led astray. Real cause is probaby xHCI FLxHCIc.sys Bus driver
  The fresco logic.

  9F error checking, {3, fffffa80061ad060, fffff80000b9c3d8, fffffa800b75e690}
  Probably caused by: pci.sys
  FAILURE_BUCKET_ID: X64_0x9F_3_FLxHCIc_IMAGE_pci.sys
  BUCKET_ID: X64_0x9F_3_FLxHCIc_IMAGE_pci.sys

  Further analysis also indicates that flxhcic.sys as of 16/10/2011 xHCI Bus Driver Fresco Logic.

  > [16, 2] 0 e1 fffffa8008c1e060 00000000 00000000-00000000 pending
  Failed to load image \SystemRoot\system32\DRIVERS\FLxHCIc.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for FLxHCIc.sys
  ERROR: Module load completed but symbols could not be loaded for FLxHCIc.sys
  \Driver\FLxHCIc

  Check with the support of ASUStek, their online documentation and drivers and ask the
  ASUStek Forums about known problems with this model.

  BiosVersion = N53SM.203
  BiosReleaseDate = 10/01/2012<- check="" for="" updates="" to="" the="" bios,="" low="" level="">
  pilots and pilots of major on-board and separate devices.
  SystemManufacturer = ASUSTeK Computer Inc..
  SystemProductName = N53SM
  Family = N
  SystemVersion = 1.0
  BaseBoardManufacturer = ASUSTeK Computer Inc..
  BaseBoardProduct = N53SM
  BaseBoardVersion = 1.0

  N53SM - there are more recent BIOS, chipset, and other drivers.
  http://support.ASUS.com/download.aspx?SLanguage=en&m=N53SM&p=3&s=271

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Bad Pool Caller error (Windows 8) - including the link to my Minidump file

  Hello!

  I recently received 4 blue screens; the first three were probably related to Avast, so I uninstalled ( Memory_managementerror)

  Later, says error Bad_Pool_Caller

  I have already travelled through further discussion, so here is the link to my Minidump file

  https://www.dropbox.com/s/sinr1qwyjjj43qw/dump.zip

  Also, here are the results of WhoCrashed

  
  

  Thank you very much!

  
  

  (Local) information system
  computer name: KISS
  Windows version: Windows 8, 6.2, build: 9200
  Windows dir: C:\Windows
  CPU: GenuineIntel Intel (r) Core i7-3630QM CPU @ 2.40 GHz Intel586, level: 6
  8 logical processors, active mask: 255
  RAM: 21425922048 total
  VM: 2147352576, free: 1917325312

  Crash Dump Analysis
  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  Wednesday, October 29, 13 16:57:33 this computer crashed
  crash dump file: C:\Windows\Minidump\102913-8937-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7A040)
  Bugcheck code: 0xC2 (0x7, 0x11C1, 0x11AC6DA0, 0xFFFFFA8011AC6DB0)
  Error: BAD_POOL_CALLER
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that the current thread is doing a bad pool request.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, October 29, 13 16:57:33 this computer crashed
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: gdi32.sys (GDI32! D3DKMTPresent + 0xA)
  Bugcheck code: 0xC2 (0x7, 0x11C1, 0x11AC6DA0, 0xFFFFFA8011AC6DB0)
  Error: BAD_POOL_CALLER
  Bug control description: This indicates that the current thread is doing a bad pool request.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: gdi32.sys.
  Google search: gdi32.sys BAD_POOL_CALLER

  Wednesday, October 29, 13 12:15:41 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\102913-13828-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7A040)
  Bugcheck code: 0x1A (0xFFFFF70001080000, 0x1C03, 0 x 5003, 0x1C0400003846)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.

  
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, October 29, 13 11:42:59 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\102913-23578-01.dmp
  This was probably caused by the following module: ntfs.sys (Ntfs + 0x40C90)
  Verification of error code: 0 x 24 (0xFFFFF8800ACAE0C8, 0xFFFFF8800ACAD900, 0xB50019060B, 0xFFFFF8800197C552)
  Error: NTFS_FILE_SYSTEM
  file path: C:\Windows\system32\drivers\ntfs.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT file system driver
  Bug control description: This indicates there is a problem in the NTFS file system.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Tuesday, October 28, 13 18:22:31 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\102813-13562-01.dmp
  This was probably caused by the following module: dxgmms1.sys (dxgmms1 + 0x263E7)
  Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF880049B53E7, 0xFFFFF8800975A4E8, 0xFFFFF88009759D20)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
  file path: C:\Windows\system32\drivers\dxgmms1.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: DirectX Graphics MMS
  Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Conclusion
  5 dumps were found and analysed. A third-party driver has been designated to be the cause of breakdowns of the system on your computer. It is strongly recommended that you check the updates for these drivers on their corporate Web sites. Click on the links below to search with Google for updates these drivers:

  Gdi32.sys

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP!  
  If you don't know what it means that you're probably not

  1-Memtest. (You can learn more about running memtest here)
  Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Get it here
  Boot from the CD and let it run at least 5 or 6 passes.
  Remember, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
  Test the sticks individually and if you find a good, test it in all slots.

  If a well-known stick fails in a card mother slot but not an another is probably the slot.
  
  
  2-Driver Verifier (for full instructions, see our wiki here)
  Using Driver Verifier is a dubious proposition.
  Most of the time it will crash and it will tell you what is the driver, but sometimes, it will crash and will not tell you the driver.
  Sometimes it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.

  I suggest that you first back up your data and make sure you have access to another computer so you can contact us in case of problems.
  Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).
  
  Here is the procedure:
  Go to Start and type "auditor" (without the quotes) and press enter
  Select "create of the custom settings (for code developers)" and click "Next".

  Select "Select individual settings from the list complete" and click "next".
  Select all elements EXCEPT FOR "Low Resource Simulation"
  Do not check to win 8 Concurrency stress test and the verification of the conformity of DDI, click "next".
  Select "Select the driver names from a list", then click on "next".
  Select all drivers NOT supplied by Microsoft, and then click "Next".
  Select 'Finish' on the next page.
  
  Restart the system and wait as he crashed to blue screen.
  Continue to use your system normally and if you know what are the causes of the crash, do it several times.
  The objective here is to get the system crash because Driver Verifier is stressing out the drivers.
  If it is not planted for you, then let it run for at least 36 hours of continuous operation.
  
  If you are unable to Windows because it crashes too early, try safe mode.
  If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

• Error Windows with Memory.dmp after registry cleaner

  Hello

  Often, I run my registry (Eusing) cleaner to help my computer work better. But recently, he finds more errors than usual and after cleaning the registry, I lost the use of my touchpad (because I use a laptop), my computer ran more slowly (even if she becomes faster), and restart, shut down or even shut down my laptop, it will always do, then come (when it comes) telling me an error that forced the phone to restart. The error concerns the files

  C:\windows\minidump\061114-26972-01.dmp

  C:\Users\*username*\appdata\local\temp\wer-76471-0.SysData.XML

  C:\windows\memory.dmp

  After restarting my computer in safe mode, the errors have not persisted, but restarting leads to a DPC_WATCHDOG_VIOLATION.

  Please let me know which files you need to see, and how I can download them.

  Wednesday, June 11, 2014 18:41:22 + 0000, Shnerdling wrote:

  Hello

  Often, I run my registry (Eusing) cleaner to help my computer work better. But recently, he finds more errors than usual and after cleaning the registry, I lost the use of my touchpad (because I use a laptop), my computer ran more slowly (even if she becomes faster), and restart, shut down or even shut down my laptop, it will always do, then come (when it comes) telling me an error that forced the phone to restart. The error concerns the files

  Registry cleaning programs are all snake oil. Cleaning of the
  registration is not necessary and is dangerous. Let alone register and
  do not use any registry cleaner. Despite what many people think, and
  What software record cleaning suppliers are trying to convince you,
  have unused registry entries is not really make you hurt.

  The risk of a serious problem caused by a registry cleaner by mistake
  delete an entry you need is much greater than any potential benefit
  It can have.

  Read
  http://www.howtogeek.com/171633/why-using-a-registry-cleaner-wont-speed-up-your-PC-or-fix-crashes/
  and also
  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

  You can also read the section on the registry of CCleaner
  Here cleaning product:
  http://www.howtogeek.com/113382/how-to-use-CCleaner-like-a-Pro-9-tips-tricks/

  Let me stress that neither me nor anyone else who warns the
  use of registry cleaners never said that they always cause
  problems. If they have always caused problems, they would disappear from
  the market almost immediately. Many people have used a registry
  cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it
  the risk of a significant problem. And since there is no
  benefits of using a registry cleaner, running that risk is a very bad
  good deal.

• Bootcamp blocks windows 10

  Hello everyone

  I own a macbook air mid-2013 and I tried to install win 10 on it. I used Bootcamp to download supported drivers. Like many of you I had as we the trick to skip installing the audio driver realtek to install the drivers to support. After that I installed it manually via the file on the usb key. But now whenever I start windows, it crashes on me after 2-3 minutes. I get the blue screen of death, saying: I had a "kernel security" check failure. I am sure that the bootcamp software is the fault. I am really frustrated. Does anyone of you have similar problem and has someone already reported such things to apple? I mean it's that apple is not able to provide drivers of ridiculous work. I call the apple support. Here's the Windows bug report.

  Computer name: computer DESK-IMM6ITP
  Windows version: Windows 10, 10.0, build: 10586
  Windows dir: C:\Windows
  Material: MacBookAir6, 2, Apple Inc., Mac-7DF21CB3ED6977E5
  CPU: GenuineIntel Intel (r) Core i5-4250U CPU @ 1.30 GHz Intel586, level: 6
  4 logical processors, active mask: 15
  RAM: 4232339456 bytes total

  Crash Dump Analysis

  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  We Sun 20.03.2016 22:21:18 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\032016-8140-01.dmp
  This was probably caused by the following module: win32kbase.sys (win32kbase! GreDeleteSemaphore + 0 x 24)
  Bug check code: 0 x 139 (0xFFFFD00020806450, 0xFFFFD000208063A8, 0 x 3, 0 0)
  Error: KERNEL_SECURITY_CHECK_FAILURE
  file path: C:\Windows\system32\win32kbase.sys
  product: operating system Microsoft® Windows®
  company: Microsoft Corporation
  Description: base-Win32k-Kerneltreiber
  Bug control description: the kernel has detected a critical data structure corruption.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  We Dim 20.03.2016 21:44:14 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\032016-6437-01.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bug check code: 0 x 139 (0xFFFFD00087D57750, 0xFFFFD00087D576A8, 0 x 3, 0 0)
  Error: KERNEL_SECURITY_CHECK_FAILURE
  Bug control description: the kernel has detected a critical data structure corruption.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  We Dim 20.03.2016 21:41:20 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\032016-11671-01.dmp
  This was probably caused by the following module: ntfs.sys (NTFS! NtfsFlushVolume + 0x9DD)
  Bug check code: 0 x 139 (0xFFFFD000206B2F60, 0xFFFFD000206B2EB8, 0 x 3, 0 0)
  Error: KERNEL_SECURITY_CHECK_FAILURE
  file path: C:\Windows\system32\drivers\ntfs.sys
  product: operating system Microsoft® Windows®
  company: Microsoft Corporation
  Description: NT-Dateisystemtreiber
  Bug control description: the kernel has detected a critical data structure corruption.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  We Dim 20.03.2016 21:39:42 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\032016-11140-01.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bug check code: 0 x 139 (0xFFFFD000221F5750, 0xFFFFD000221F56A8, 0 x 3, 0 0)
  Error: KERNEL_SECURITY_CHECK_FAILURE
  Bug control description: the kernel has detected a critical data structure corruption.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  We Dim 20.03.2016 21:36:15 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\032016-10859-01.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bug check code: 0 x 139 (0xFFFFD0007A8CD750, 0xFFFFD0007A8CD6A8, 0 x 3, 0 0)
  Error: KERNEL_SECURITY_CHECK_FAILURE
  Bug control description: the kernel has detected a critical data structure corruption.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  The sea 16.03.2016 13:38:57 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\031616-11046-01.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bug check code: 0 x 139 (0xFFFFD00021765750, 0xFFFFD000217656A8, 0 x 3, 0 0)
  Error: KERNEL_SECURITY_CHECK_FAILURE
  Bug control description: the kernel has detected a critical data structure corruption.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  The sea 02.03.2016 16:20:35 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\030216-14546-01.dmp
  This was probably caused by the following module: keyagent.sys (KeyAgent + 0x107C)
  Bugcheck code: 0xC4 (0xF6, 0x2C8, 0xFFFFE000FE7C77C0, 0xFFFFF801FD3E107C)
  Error: DRIVER_VERIFIER_DETECTED_VIOLATION
  file path: C:\Windows\system32\drivers\keyagent.sys
  product: Boot Camp
  company: Apple Inc..
  Description: KeyAgent Apple driver
  Bug control description: this is the code of verification of general bug for fatal errors found by Driver Verifier.
  A pilot made reference to a handle from user mode to kernel mode. This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: keyagent.sys (Apple KeyAgent Driver, Apple Inc.).
  Google search: Apple Inc. DRIVER_VERIFIER_DETECTED_VIOLATION

  The 02.03.2016 sea 16:13:00 GMT your computer crashed
  crash dump file: C:\Windows\Minidump\030216-13031-01.dmp
  This was probably caused by the following module: keyagent.sys (KeyAgent + 0x107C)
  Bugcheck code: 0xC4 (0xF6, 0x2C8, 0xFFFFE001AE2037C0, 0xFFFFF801CBA4107C)
  Error: DRIVER_VERIFIER_DETECTED_VIOLATION
  file path: C:\Windows\system32\drivers\keyagent.sys
  product: Boot Camp
  company: Apple Inc..
  Description: KeyAgent Apple driver
  Bug control description: this is the code of verification of general bug for fatal errors found by Driver Verifier.
  A pilot made reference to a handle from user mode to kernel mode. This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: keyagent.sys (Apple KeyAgent Driver, Apple Inc.).
  Google search: Apple Inc. DRIVER_VERIFIER_DETECTED_VIOLATION

  The 02.03.2016 sea 16:10:31 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\030216-14140-01.dmp
  This was probably caused by the following module: keyagent.sys (KeyAgent + 0x107C)
  Bugcheck code: 0xC4 (0xF6, 0x2A8, 0xFFFFE001E32AF480, 0xFFFFF801AA9B107C)
  Error: DRIVER_VERIFIER_DETECTED_VIOLATION
  file path: C:\Windows\system32\drivers\keyagent.sys
  product: Boot Camp
  company: Apple Inc..
  Description: KeyAgent Apple driver
  Bug control description: this is the code of verification of general bug for fatal errors found by Driver Verifier.
  A pilot made reference to a handle from user mode to kernel mode. This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: keyagent.sys (Apple KeyAgent Driver, Apple Inc.).
  Google search: Apple Inc. DRIVER_VERIFIER_DETECTED_VIOLATION

  The 02.03.2016 sea 16:06:46 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\030216-12437-01.dmp
  This was probably caused by the following module: keyagent.sys (KeyAgent + 0x107C)
  Bugcheck code: 0xC4 (0xF6, 0x2D0, 0xFFFFE000BAA5E080, 0xFFFFF800BF58107C)
  Error: DRIVER_VERIFIER_DETECTED_VIOLATION
  file path: C:\Windows\system32\drivers\keyagent.sys
  product: Boot Camp
  company: Apple Inc..
  Description: KeyAgent Apple driver
  Bug control description: this is the code of verification of general bug for fatal errors found by Driver Verifier.
  A pilot made reference to a handle from user mode to kernel mode. This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: keyagent.sys (Apple KeyAgent Driver, Apple Inc.).
  Google search: Apple Inc. DRIVER_VERIFIER_DETECTED_VIOLATION

  What is the possibility of installing W10 and installing the drivers for keyboard, mouse, GPU of BC6 records, but not by using setup.exe? This will leave some of your hardware Apple works does not as expected. This is a test.

• Satellite C850-A822: using Windows 7 BSOD

  Hello everyone,
  I bought my computer laptop of United Arab Emirates (but now living in the United States)
  Toshiba Satellite C850-A822
  Windows 7 Home Basic 32-bit
  
  so my problem is Windows Blue Screen Of Death, I had this problem before and it's dark and then it opens ever, so after that I took to fix it and they said that they need to get into shape so that they did
  and now after 5 months, the problem is new
  
  Information of the problem:
  
  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.2
  Locale ID: 1033
  
  More information about the problem:
  BCCode: a
  BCP1: 00000000
  BCP2: 00000002
  BCP3: 00000001
  BCP4: 82EB8EC3
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1
  
  Files helping to describe the problem:
  C:\Windows\Minidump\102413-49904-01.dmp
  C:\Users\Iqbal\AppData\Local\Temp\WER-408675-0.SysData.XML
  
  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288 & clcid = 0 x 0409
  
  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt
  
  What can I do? I really want to make the point to worse... but really what caused it and why? and please tell me how to fix ASAP
  
  Thank you!
  
  Dali

  After reading your ad, it is not easy to say what the problem is. The configuration of your laptop is not known for us, but maybe some third-party programs or service may be responsible for this.
  
  It will be interesting to check out the minidump file and know what is the problem.
  
  Try to start your computer in safe mode and let us know if the problem persists. If this is not the case, try to avoid software conflicts by preventing startup and loading non-Microsoft services.