Message appears when I turn on my computer (ie3sh.exe. unable to locate component)

Similar Questions

• "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

  Original title: SiSUSBrg.exe

  "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

  Hope that this is not a virus!  Help?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353
  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• C:\Windows\mixer.exe appears when I turn on my computer first

  Is what is coming up on my screen when I turn firstly my computer asks me to run, I have to, what is? If I should not the lance how can I get rid of him?

  I do not have this file on my system, so it's probably a Vista file.  While in Safe Mode (press F8 repeatedly during boot to enter the mode safe mode with networking) try to run anti-malware programs because you are probably infected with some form of malware. Do NOT run! To correct this problem download, install, and run the following two programs: http://www.malwarebytes.org/mbam.php and http://www.safer-networking.org/en/index.html.  Once you find and remove it, you can stop the scan.  You can also try a free trial of Pandasoft (www.pandasoft.com).  Before you download pandasoft, uninstall all anti-virus program you currently use (because the installation and execution of two simultaneously can cause conflicts, freezes and all sorts of problems).  Once you have uninstalled your current AV program, download, install, update and scan using Pandasoft.  I think you might be amazed at how much she notes that other software missed.  Once complete, uninstall pandasoft and re - install your current AV program (unless you decide to spend that I did when I tried about 4 years ago).  You can also try the new, free Microsoft Security Essentials http://www.microsoft.com/security_essentials/default.aspx (with the same caveat that only program AV one ALONE can be installed and running on your system at any time). Restart after you have completed all the scans.

  If these analysis and cleaning to solve the problem (if the box no longer appears), then we will check some of your system files just to be on the safe side:

  Go to start / programs Alll / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run. It will scan and try to correct some of your system files.  If all goes well, it is completed with no corruption that he could not repair (cases of corruption, post here).

  While we are here, we will check your hard disk by typing chkdsk /f /r and enter and let it run.  It will scan and try to repair the bad sectors.

  I hope that this will solve the problem.  If not, post it here and we will look at some other troubleshooting steps.

  Good luck and I hope this helps.
  Lorien - a - MCSE/MCSA/network + / A +.

• How to stop my password that appears when I turn on my computer

  I changed my password and want to keep it a secret, but when I turn on my computer the password appears on the screen

  Where is it displayed?  There should be no way the computer show your password.  User name, Yes, but no password.

• the desktop icons no longer appear when I turn on the computer.

  Hello, I recently upgraded to an office update prompted and now the desktop icons no longer appear when I restart the computer. I can click with the right button on the desktop, select display, uncheck 'show descktop', then right click on the desktop again, select "Show the desktop" and they will appear. However, when I restart the computer they will disappear again and I have to re do the process again. I use my desktop icons/shortcuts all the time. Does anyone know how to remedy this?

  Hello, I recently upgraded to an office update prompted and now the desktop icons no longer appear when I restart the computer. I can click with the right button on the desktop, select display, uncheck 'show descktop', then right click on the desktop again, select "Show the desktop" and they will appear. However, when I restart the computer they will disappear again and I have to re do the process again. I use my desktop icons/shortcuts all the time. Does anyone know how to remedy this?

  See if this work...

  Right-click in a space of taskbar oprn > select Task Manager > processes tab > right-click on explorer.exe > click on end process > Applications tab > click New task... > of Opeb, enter explorer.exe > OK when.

  You check office. There the icons? If so, reboot, still exist the icons?

  If the foregoing does nopt working, do a system restore.
  Choose a date where you did not have this problem as your restore point.
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

• During the attempt to re - install the iTunes software, I got the Windows 126 error message. APSDaemon, exe-Unable to locate component. MSVCR.90.dll was not found. Re-installing may fix this problem

  I use Windows XP PRO Sp 3. I tried to open an iTunes download & got this message. "APSDaemon.exe that this application was able to start. Could not locate the component that msvcr.90.dll was not found. Re-installing may fix this problem. "
  All this happened after I tried to install a new update Apple iTunes. He kept saying that he could not install... I tried several different things to solve this problem, including doing a system restore in frustration, for 2 days before today... I tried to update iTunes, not always the case. Help, I'm a no techno, so please do not just refer me to somewhere else, I will never understand what I'm told to do, whenever I am sent somewhere else, I can't solve my problem & give up in frustration. Please can someone take pity on me & guide me through the fix?
  A related problem, I tried to run iTunes from the desktop, but I got was the Mini audio player.
  I just tried to recreate that & got again the error messages, the one listed above main & another one that says "iTunes is not installed correctly. Please re - install. Error 7 (Windows error 126).
  Whenever I try to re - install, I get the error again on the component .dll.
  I hope that's enough info to try & help me. I really need this fix to work as I have many meditations downloaded on iTunes, because Windows Media Player could not open the files.   It would take me hours & hours to find where they came, they were downloaded over 4 years!
  Thank you in advance.
  Sylvia

  If you have not had luck in iTunes (https://discussions.apple.com/community/itunes/itunes_for_windows?view=discussions#/?tagSet=1234) forum, uninstall and reinstall iTunes as described below:

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.  (If you are using Vista, see THIS instead).

  Go to control panel > Add/Remove programs
  Remove these applications in the following order (do not restart your computer if you are prompted during this process):

  1 iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4 Hello
  5 Apple Application Support (iTunes 9 or later)

  6. iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)

  7. iPod Updater

  8 QuickTime

  Open my computer > C: > Program Files
  Delete these files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Follow these steps if the message "cannot delete iPodService.exe: it is used by another person or program" appears when you try to delete the folder of the iPod.

  1. Make sure that you have iTunes and iPod Update utility are not open.
  2. Press Ctrl-Alt-Delete.
  3. Select Start Task Manager.
  4. Click the processes tab.
  5. Locate the iPodService.exe in the list.
  6. IPodService.exe-click and choose end process.
  7. Quit Task Manager.

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  NOTE: If you have trouble uninstalling applications, or if you have a problem, reinstall iTunes because the installer complains that it can not uninstall the current version of iTunes, see the 'Installation issues' section below.

  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

  Installation problems

  There are several tools to deal with problems installing or uninstalling applications.  If you have these problems, the following should help.  Before using one of these tools (including #3), you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  1 Microsoft has a program install and the resolution of the problems of the uninstalling which is supposed to "work better" and be "safer" to use the old Install Cleanup Utility (3 below).

  2. free Revo Uninstaller.  You can also download a trial version of uninstaller Revo's ' Pro', which has a few more aggressive cleaning options, but this should not be necessary.

  3 Microsoft Windows Install Cleanup Utility.  Although this tool has been the preferred tool to deal with the problems of Windows Installer, Microsoft removed from Microsoft download servers because it seems sometimes deleted more than he was supposed to (I believe this was linked to Office uninstall).  You can still get Windows Installer Cleanup here--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html utility

• The analysis appears when I turn on my computer and it won't go away.

  If I hit Cancel I get error 1706. I have had this problem since I had to uninstall Roxio Creater 2009. No idea how I can get rid of the box Scan? In fact, I have two boxes to scan at the time.  One of them says: "the component you are trying to use is on a CD-ROM or another removable disk that is not available...". Insert the diskette "Scan", then click OK. "With this box, I have the opition to click OK or cancel. If I click Cancel then I get error 1706, if I click OK, it just says: access to the content of the service... but nothing happens. The second Scan box says "Please waith while Windows configures the analysis" with a Cancel button. I had this problem for a week the tims boxes are flashing and my computer is unusable basicall. I ran my anti-virus scans and there is no problem what so ever. Help!

  Hi EugeneWI,

  Follow the steps in the article.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  You can also check if the software vendor has an uninstall program to remove the software completely from the computer.

• active desktop recovery message appears everytime I turn on my computer, how do I get rid of it

  I didn't add something back to one of my sites or web pages, my computer was left on and I guess that came into fashion "sleep" and was extinguished without being loged out.

  I suggest you restore the system to an earlier date before the problem.

  If this does not work a good cold start (make a start > Shutdown > Shutdown and wait that it to completely disable and then give 15-20 seconds and power back on) after correcting your office to be where you need it. If it does not work. I suggest to remove all the websites your ad, restart the computer, add them all back.

• I get error messages ie3sh.exe - Unable to locate the BHO component. DLL not found message when I start my computer. I do not have the reinstall disk that I need to do.

  I also 80070490 error codes and C355. I used CCcleaner to clean my registrys and used the system preparation tool. I regularly use spybot search and destroy for malware protection and search for viruses with my anti-virus program. What should I do? Thank you.

  BHO. DLL & IE3SH problems on my computer starts?
  http://answers.Microsoft.com/thread/ffbe5016-84d9-47E0-8303-43419c1abba5

• When I turn on my laptop the following appears: gamevance32.exe - Unable to locate component. How can I get rid of this?

  He also says: this application has failed to start because gamevance 32. dll not found.  Reinstall the application my fixed this problem.  I don't know even what application it talking about.

  Hello Mamaruthie

  I think it is malware

  Download and run Malwarebytes (free version)

  http://www.Malwarebytes.org/MBAM.php

  .

• Problem: When I turn on the computer, windows setup box appears and is installing a file

  After getting the "preparing to install" message, another message comes up saying "Please wait while windows configures roxio media manager.

  Then another message comes up saying "gathering required information".
  "The feature you are trying to use is on a network unavailable resource."

  "Click OK to try again or enter a different path to the folder containing the installation package 'Roxio Media Manager. MSI' area points to the following path C:\Documents and Settings\Jeffrey Brown\Application is In Motion. BlackBerry\Updates\6852A378-7780-4e80-B65-343C8D2C36AE\SR_MM\

  I have the Blackberry desktop manager installed on my computer and I also got a message saying there were some updates, but I was never able to download updates, if there are.

  How can I get rid of this process that appears everytime I turn on the computer?

  We had the same questions and the same messages.  Whenever you should cancel the installation, he returned again and again and much slowed down the system.  I canceled the installation of Roxio (but he kept coming back and coming back, he finally trying to cancel) and then used Windows install Cleaner. I found when I tried to install the vacuum it was already installed on the PC.  I ran and it worked with no run-time error.  I stopped and restarted and not have Roxio stuff want to install.

• I get 2 back to back error messages when I turn on my computer?

  I get 2 back to back error messages when I turn on my computer, they are:

  (1) "Windows cannot find ' * 2 boxes * [I don't see what it is and only 2 boxes are visible]. Make sure you typed the name correctly and then try again. To search for a file, click the Start button and then click on search"; Clicking OK comes the following error message
  (2) could load not run ' * 2 boxes * [I don't see what it is and only 2 boxes are visible] ' specified in the registry. Make sure that the file exists on your computer, or remove the reference to the file in the registry. "

  Browse for it on the internet I came across a software called HAKO Removal Tool. This website says that my computer has been infected by a Trojan of HAKO and that would fix it. I downloaded, scanned the computer with her and she found a problem with the 2 files.
  "Process.exe" and "HotKeysCmds".  BUT this is a paid software and I have to pay 50USD to use. Is there anything else possible?
  Although Kaspersky' 10 and Super AntiSpywayre don't seem to find anything wrong.

  Symptoms:
  Computer is very slow. especially the navigation on the internet. Whereas it is fine if I use a laptop with Wifi..?

  What is the problem?

  I get 2 back to back error messages when I turn on my computer, they are:

  (1) "Windows cannot find ' * 2 boxes * [I don't see what it is and only 2 boxes are visible]. Make sure you typed the name correctly and then try again. To search for a file, click the Start button and then click on search"; Clicking OK comes the following error message
  (2) could load not run ' * 2 boxes * [I don't see what it is and only 2 boxes are visible] ' specified in the registry. Make sure that the file exists on your computer, or remove the reference to the file in the registry. "

  Browse for it on the internet I came across a software called HAKO Removal Tool. This website says that my computer has been infected by a Trojan of HAKO and that would fix it. I downloaded, scanned the computer with her and she found a problem with the 2 files.
  "Process.exe" and "HotKeysCmds".  BUT this is a paid software and I have to pay 50USD to use. Is there anything else possible?
  Although Kaspersky' 10 and Super AntiSpywayre don't seem to find anything wrong.

  Symptoms:
  Computer is very slow. especially the navigation on the internet. Whereas it is fine if I use a laptop with Wifi..?

  What is the problem?

  If your computer has not already been infected by virus or malware, it is probably now after you have downloaded and installed something of a site that wants to pay you $50 to remove something you didn't know you had until told this same site.

  Do you mean that you have installed Kaspersky Anti-Virus 2010?  Your subscription is up to date?

  Similarly, you would update SUPERAntiSpyware before running a scan of your computer?

  I'm not sure what you mean by '2 boxes.'  Do you mean that instead of characters for a file name, you see two empty squares?  In any case, download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx install it and let it scan.

  When Autoruns analysis is complete, click the 'connection '.  Review them entered what whether that looks like "bad."  I can't be more specific, because you could not see that the name of which has been commissioning.  By looking at the name of the entry, its description and its publisher, you should be able to easily identify most of the entries in the logon section.  If you can't, either post the details of back here or do a Google search.

  For any entry that does not appear to be legitimate, uncheck the box to the left of the entrance.  Close the Autoruns and restart the computer.  Messages should no longer appear.  Once you are convinced that you have disabled the correct entries, you can go back and use Autoruns to delete (instead of just deactivating).

  I also suggest you analyzing your system with other tools.
  Download, install, update and run MalwareBytes Anti-Malware.
  Go to http://www.eset.com/us/online-scanner and let it scan your computer.

• When I turn on the computer, I get this message - COM + Event System has stopped working. How can I activate this return?

  I had virus protection total defence installed. This occurred immediately after.

  Hello

  Thanks for your answer to my question. I was about to start step 2, by performing a boot minimum when a message pops up informing that 2 programs were slowing down my computer and also to stop because they were also running. Ironically, these programs I've ever used has appeared on my computer advertising protection against viruses and to speed up the computer.

  I did not purchase the license if it comes to start up all the 3 or 4 days telling me that my computer is slow.

  I uninstalled both programs, which I won't mention for obvious reasons and the event system Com + message did not return after the computer has restarted 3 times. Apparently, the problem has been resolved, but I will continue to have oversight. If the problem returns I'll restart and inform you about the results.  Thanks again for your expertise. guavaridgemb

  Thanks for posting your question in the Microsoft Community.

  I understand that when you turn on the computer, you get an error message indicating that COM + has event system stopped working. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  Please follow the steps and check the question below:

  Step 1:

  Check the event viewer for the logs of error from the links below.

  Open Event Viewer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  What are the information in event logs? (Event Viewer):

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

   

   

  Step 2:

   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

   

   

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Step 3:

   

  Scan your computer by using the Microsoft Safety Scanner by clicking Download now to check if there is no virus infected:

  http://www.microsoftsafetyscanner.com/

   

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

   

• When I turn on my computer a warning appears indicating "delivery manager does not properly.

  DEP original title: data

  When I turn on my computer, a warning appears that says "delivery manager does not properly" and when I click on help and support balloon explanation is that my DEP is not configured correctly.

  Then, after following the instructions and correct the parameters I restart my pc and still the same message appears.

  Hi Olliewoods,

  (1) since when are you facing this problem?

  (2) what is you receive the exact error message?

  An application installed on the computer may be the cause of this problem; I suggest you try the following steps:

  Method 1: Put the computer to boot to determine which application is causing the problem.

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  See the link below for more information on Data Execution Prevention
  Data Execution Prevention: Frequently asked questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lately when I turn on my computer, I get a message saying. "Windows mail can compact the message store. This can take up to a few minutes. »

  Lately when I turn on my computer, I get a message saying. "Windows mail can compact the message store. This can take up to a few minutes. "It looks like a real message of Windows but when I click on the link"Get help from communities", it does not work. I cancel or close the message, because I fear that the message can be fake and won't open my computer for a virus or worse. Anyone has any info on this particular message? I can't find anything in the help section of Windows. Thank you.

  original title: compaction of the database messages

  Hi Kathy,

  Please click on the orange button at the top of this page that will help you find the right forum for your problem in ads.

  Mike