the desktop icons no longer appear when I turn on the computer.

Similar Questions

• C:\Windows\mixer.exe appears when I turn on my computer first

  Is what is coming up on my screen when I turn firstly my computer asks me to run, I have to, what is? If I should not the lance how can I get rid of him?

  I do not have this file on my system, so it's probably a Vista file.  While in Safe Mode (press F8 repeatedly during boot to enter the mode safe mode with networking) try to run anti-malware programs because you are probably infected with some form of malware. Do NOT run! To correct this problem download, install, and run the following two programs: http://www.malwarebytes.org/mbam.php and http://www.safer-networking.org/en/index.html.  Once you find and remove it, you can stop the scan.  You can also try a free trial of Pandasoft (www.pandasoft.com).  Before you download pandasoft, uninstall all anti-virus program you currently use (because the installation and execution of two simultaneously can cause conflicts, freezes and all sorts of problems).  Once you have uninstalled your current AV program, download, install, update and scan using Pandasoft.  I think you might be amazed at how much she notes that other software missed.  Once complete, uninstall pandasoft and re - install your current AV program (unless you decide to spend that I did when I tried about 4 years ago).  You can also try the new, free Microsoft Security Essentials http://www.microsoft.com/security_essentials/default.aspx (with the same caveat that only program AV one ALONE can be installed and running on your system at any time). Restart after you have completed all the scans.

  If these analysis and cleaning to solve the problem (if the box no longer appears), then we will check some of your system files just to be on the safe side:

  Go to start / programs Alll / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run. It will scan and try to correct some of your system files.  If all goes well, it is completed with no corruption that he could not repair (cases of corruption, post here).

  While we are here, we will check your hard disk by typing chkdsk /f /r and enter and let it run.  It will scan and try to repair the bad sectors.

  I hope that this will solve the problem.  If not, post it here and we will look at some other troubleshooting steps.

  Good luck and I hope this helps.
  Lorien - a - MCSE/MCSA/network + / A +.

• Message appears when I turn on my computer (ie3sh.exe. unable to locate component)

  This message appears when I turn the computor as it

  This hads application could not start because bho, dll is not found.

  rienstalling the application may fix this problem.                      what it means

  to me, it looks like malicious software:

  Perform a complete equipped with scanning AntiVirus as well as Microsoft Security Essentials scan your PC with Malwarebytes' Anti-Malware.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How to stop my password that appears when I turn on my computer

  I changed my password and want to keep it a secret, but when I turn on my computer the password appears on the screen

  Where is it displayed?  There should be no way the computer show your password.  User name, Yes, but no password.

• Toshiba laptop computer desktop icons no longer appear.

  do not display the desktop icons

  Right-click on the desktop, and select view.
  Under view, place a check on "show desktop icons".
  If this does not work, try this: -.
  http://www.SevenForums.com/graphic-cards/21558-icon-went-missing-Windows-7-heres-fix.html

  If this post answers your question, click mark as answer .

• CD players and dvd no longer appear when I click Start and computer - when I check the Device Manager I get a code 19 - drivers may be missing

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  Hello

   
  1. have you upgraded Windows Xp to Windows Vista?
  2 have you made changes on the computer before this problem?
   
  I would suggest trying the following methods and check if it helps.
  Method 1:
  Run the fixit from Microsoft Fixit article and if that helps.
  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  Method 2:
  Try the steps in the following Microsoft article and check if it helps.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs:
  http://support.Microsoft.com/kb/982116
   
  If you have upgraded Windows Xp to Windows Vista, try the steps in the following Microsoft article and check if it helps.
  CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista: http://support.Microsoft.com/kb/929461
   
  Hope the information is useful.

• The analysis appears when I turn on my computer and it won't go away.

  If I hit Cancel I get error 1706. I have had this problem since I had to uninstall Roxio Creater 2009. No idea how I can get rid of the box Scan? In fact, I have two boxes to scan at the time.  One of them says: "the component you are trying to use is on a CD-ROM or another removable disk that is not available...". Insert the diskette "Scan", then click OK. "With this box, I have the opition to click OK or cancel. If I click Cancel then I get error 1706, if I click OK, it just says: access to the content of the service... but nothing happens. The second Scan box says "Please waith while Windows configures the analysis" with a Cancel button. I had this problem for a week the tims boxes are flashing and my computer is unusable basicall. I ran my anti-virus scans and there is no problem what so ever. Help!

  Hi EugeneWI,

  Follow the steps in the article.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  You can also check if the software vendor has an uninstall program to remove the software completely from the computer.

• Transformation nodes no longer appear when I use the online tool

  Transformation nodes no longer appear when I use the online tool.

  They used to show on the square shapes and ellipses and when I open old files with lines they always show on them too.

  Tried to hide and display the bounding box and switch between the selection and direct (black and white cursor tools) but can't get it to show the normal 8 knots.

  It shows only a knot at each end and when I select and drag the tool Selection normal (black slider) it is the same when I use the direct Selection (white slider) tool and is not right.

  Someone at - he seen this before?

  

  It is not possible.

  But you can describe your workflow and how you would need commands selection to work.

  Use this form for your requests for telephone communications:

  Feature request/Bug Report Form

• When I turn on my computer and the desktop comes up, I get error Runner "file name (updates from HP.exe) Runner has no... "

  When I turn on my computer and the desktop comes up, I get a Runner error - "doesn't have a Runner (updates from HP.exe) file name '-' (the id separator).»  If I click OK everything continues normally.  What should I do?

  It is an HP with Windows XP computer.

  Hello

   
   
   
  Try to perform the clean boot and check if it helps, here is the link:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353 
   
   
  Note:
   
  How to configure Windows to use a Normal startup state
  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
  1. click Start and then click Run .
  2. type msconfig, and then click OK.
  The System Configuration Utility dialog box appears.
  3. click on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When you are prompted, click restart to restart the computer.

• My CD and DVD players no longer appear when I choose 'My Computer' and that they do not recognize any disk inserted.

  My CD and DVD players no longer appear when I choose 'My Computer' and that they do not recognize any disk inserted. Did this happen when I had an update Windows online? Or a security update? How can I repair quickly and get back in the business? These drives came with my Dell Pentium 4 computer and are not external drives, by the way. And how can I keep it doesn't happen?

  Hello old gal,

  Thank you for your message.  Please visit the following link, there is a fix - it tool that should solve your problem.
  http://support.Microsoft.com/kb/314060/en-us/
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Where can I get a list and a description of the programs that load when I turn on my computer?

  I recently bought a Pavilion p7-1010 PC with operating system Windows 7. On my previous HP, I got a list of programs that started when I turned on my computer and those to whom I could remove to start which were really not essential to have running.

  Is there a place I can find a similar list for this computer and possibly a recommendation for those who I can disable.

  Thank you

  Mike

  rmh56 wrote: thank you for your response Hanspuppa, I am interested in more information on the programs that appear when I start up so that I can determine which are needed and which are not. I want to stop at the start of all programs that are not essential to the functioning of my computer. On my last computer someone gave me a list or a link to a list of programs that allowed me to learn more about the various programs, which were important. Thank you, rmh

  Hello rmh56, what would be a little difficult to determine, given that every computer comes with different programs.

  I have no way of knowing how to determine which programs can be prevented from leaving on a particular computer.

  You can try unchecking each of those entries one at a time and restart the system, or log and see if the programs perform normally, but this could be a very long process.

  Unless you are certain that a program is not necessary, I would leave checked.

  I just checked my startup programs and I shows that I have 15 startup programs.

  This doesn't seem to affect my system performance at all. I check all out them.

• My desktop picture won't stay as I put it. When I turn on my computer once again, it's a different picture. No one else has access to my computer, ever.

  My desktop picture won't stay as I put it. When I turn on my computer once again, it's a different picture. No one else has access to my computer, ever. Any ideas what's happening?

  Make sure you change the image is not checked...

  

  

• When I turn on my computer, it gets stuck on the ultra-portable gigabyte 3 screen and custom which leave me there 2 hours still no luck the only button that works are TAB rebooting too

  Original title: stuck

  When I turn on my computer, it gets stuck on ultra-portable gigabyte 3 screen and custom wide movement which I gave 2 hours still no luck the only button that works are TAB restart too it can someone help please

  Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• When I turn on my computer, the shockwave plugin has been constantly unresponding and it crashes. An error pops up (x 000...)

  When I turn on my computer, the shockwave plugin has been constantly unresponding and it crashes. An error appears (x 000...), could not see clearly, as it happens too fast and my computer restarts. After restarting it brings me to the reovery Manager, so I decided to reformat but an error pops up (error 100a).

  When I went to check the disc, that all satisfied the test except the HDD test failed, the problem was bioshd-8. The computer just always brings me to the Manager of recovery even when I want to start windows normally. Really need help. Thank you

  Hey, Izaya_Orihara
  If you encounter any problems with your HP computer?

  Method 1
  How to fix your damaged OS files:
  1. close all of your applications.
  2. click on start.
  3. Type "cmd" on ' search '.
  4. right click on "cmd" and click "Run As Administrator" and click OK.
  5. Enter "sfc/scannow" (without the quotes).
  6. press ENTER.
  7. If is done, you must restart your computer.
  If you do not work with this method, try the second method.

  Method 2
  Install Windows Vista SP2:
  You must install SP2 from here: http://www.microsoft.com/en-uk/download/details.aspx?id=16468
  And the problem has been corrected.

  If the two methods don't work, if you have a system recovery disk, open your CD/DVD drive and the put and shut it down.
  And can solve problems with your computer.

• When I turn on my computer a warning appears indicating "delivery manager does not properly.

  DEP original title: data

  When I turn on my computer, a warning appears that says "delivery manager does not properly" and when I click on help and support balloon explanation is that my DEP is not configured correctly.

  Then, after following the instructions and correct the parameters I restart my pc and still the same message appears.

  Hi Olliewoods,

  (1) since when are you facing this problem?

  (2) what is you receive the exact error message?

  An application installed on the computer may be the cause of this problem; I suggest you try the following steps:

  Method 1: Put the computer to boot to determine which application is causing the problem.

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  See the link below for more information on Data Execution Prevention
  Data Execution Prevention: Frequently asked questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.