Disable the connection to Emule, BitTorrent... router WRT54G

Similar Questions

• E1505 with Vista operating system repeatedly lose the connection network through a router WRT54G

  Model: Dell E1505

  OS: Vista Edition Home Premium

  Processor: Intel Core 2 Duo CPU T5300, 1.73 GHz

  Device of wireless network: Dell Wireless 1390 WLAN Mini Card

  Wireless router: Linksys WRT54G

  My E1505 has a problem with the Wi - Fi being dropped at least twice a day / every day with an average of seven hours of use per day.  Almost identical to several offers from others, as I'm surfing the web and try to access another site, the connection just drops and I get the white screen indicating a network connection cannot be made.  Meanwhile, my utility for wireless LAN card reflects that I have a connection 'very strong' or even 'excellent '.  The only way to connect is to restart the computer.  I did a lot of research on the Internet and tried all the suggested actions to solve the problem (changing the settings of the power of the highest performance, by changing the channel of the router, updated drivers, etc.), but none of them have cured the problem.  I also spent more than 12 hours to talk or have a Dell technician remotely access my laptop to try and fix the problem, but nothing helped.  In the end, the so-called expert technician said they did everything possible and suggested I reload Vista on my computer again, or wait for the Vista Service Pack comes out with the hope that the problem is solved.

  Can someone please! It seems that I left without other alternatives, but to spend the next eight hours, reload all my programs that are inexcusable.

  Thanks in advance for your help.

  Here are the results of the IPCONFIG/ALL command:

  Microsoft Windows [Version 6.0.6000]

  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

  C:\Users\damoke>ipconfig/all

  Windows IP configuration

  Name of the host...:-command post

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: dc.dc.cox.net

  Ethernet connection to the Local network: State media: Media disconnected

  The connection-specific DNS suffix. : dc.dc.cox.net

  ... Description: Broadcom 440 x 10/100 Integrated Controller

  Physical address.... : 00-19-B9-70-FF-E2

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : dc.dc.cox.net

  ... Description: Dell Wireless 1390 WLAN Mini Card

  Physical address.... : 00-1B-FC-44-A3-D5

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::ac77:a83:c3bf:c801 %9 (Preferred)

  IPv4 address: 192.168.1.100 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Saturday, April 12, 2008 20:22:10

  End of the lease...: Sunday, April 13, 2008 20:22:09

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DHCPv6 IOOKING...: 167779324

  DNS servers...: 68.105.28.12

  68.105.29.12

  68.105.28.11

  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 02-00-54-55-4E-01

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  IPv6 address: 2001:0:4137:9e50:203 b: 1 ca 1: 3f57:fe9b (Preferred)

  Address IPv6 local link...: fe80::203b:1 ca 1: 3f57:fe9b %8 (Preferred)

  ... Default gateway. : ::

  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Card 6TO4

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 10:

  The connection-specific DNS suffix. : dc.dc.cox.net

  Description...: isatap.dc.dc.cox.net

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::5efe:192.168.1.100%11(Preferred)

  ... Default gateway. :

  DNS servers...: 68.105.28.12

  68.105.29.12

  68.105.28.11

  NetBIOS over TCP/IP...: disabled

  C:\Users\damoke

  Message edited by MOKE DA 12/04/2008 21:24
  Message edited by MOKE DA 12/04/2008 21:25
  
  

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to disable the connection of identity when opening Outlook Express

  How to disable the connection of identity when opening Outlook Express

  In OE: File | Identities | Manage identities | Properties and uncheck the option to require a password.

• Wireless connection disappeared after pressing the button system Orange Cisco router WRT54G

  Trying to connect to a printer Dell wirless to the router and has failed, after many tests to get the computer to recognize the printer as a wireless device.  Recommended by Dell to refresh the router and I pressed the button in the above subject line.

  Now, none of my computers display the connection wireless as available. I have reset the time many cable modem and the router and him that restarted the computer and they still will not recognize the wireless connection.

  Also, I tried to use the default IP 192.168.1.1 to review my settings for the router (running a laptop directly via the cable modem), but the address keeps timing.

  What is someone out there knows what can happen to connect wireless to disappear?  Any help is greatly appreciated.  Don

  Your wireless network is gone because you press the WPS button on the front.  Never do this because you don't have the hardware to support it.  Change the SSID and password.

  Press and hold the reset on the back for 30 seconds and then release.  Wait 10 seconds and cycle power to the router.  To connect to a computer wired to the router at 192.168.1.1 only empty password, username "admin".   Now configure the router manually.

• HP Envy 15 J6Z08EA #UUW: disabling pop-up message when the connection warning me that I have disabled the connection of the fingerprint

  I want to remove an annoying message when connecting. I disabled the fingerprint reader, because it makes my games to the tab down whenever I accidentally touch the reader. And it is placed "below" on the left side of the keyboard (keys WASD, if you understand me) who thought that might be a good idea.

  Now I get these messages of connection warning me that the fingerprint is not enabled, every time I started the computer, make me when entering my password to start over from the first letter, so that my password is messy (if I had the password: 'password' that would make me write pass) , and then the popup would come, that I have to click down, and then if I write "word" it originally make my password 'wordpass' test, if you understand. So it's a manufacturer 'fault' I'm trying to fix. Any tips? Is the way to activate only the reader of fingerprints to be active during the connection and not when already connected. Or how to remove these popups WARNING when connecting.

  Hi there SimonWoss,

   

• Disable the connection on PIX 7.0

  Nice day!

  How clear (reset) specified connection (defined by the source/destination/port port pair) on PIX 7.04 If nat-control is disabled and xlate not use?

  Thank you!

  You may use the shun command. This resets the connection but also will block future connections from the IP source address corresponding, ports and protocol specified in the shun...

  "Step 1 if necessary, to display connection information by entering the following command:

  See the hostname conn #.

  The security apparatus displays information about each connection, such as the following:

  TCP on 64.101.68.161:4300 in 10.86.194.60:23 idle 0:00:00 bytes 1297 flags UIO

  Step 2 to escape the logins from the source IP address, enter the following command:

  HostName (config) # shun src_ip [dst_ip src_port dest_port [Protocol]] [id_vlan vlan]

  If you enter only the IP address of the source, all future connections are rejected; existing connections

  stay active.

  To delete an existing connection, but also connections future blocking the source IP address, enter

  the destination IP address, source and destination ports, and Protocol. By default, the Protocol is 0 intellectual property.

  Step 3 to remove the shun, enter the following command:

  "HostName (config) # no shun src_ip [vlan id_vlan].

  I hope this helps... Please note if it is!

• Disable the connection on the Help menu in Adobe Acrobat Pro ms

  Hello

  I use Acrobat Customization Wizard to build my Acrobat Pro DC package for SCCM hollow dist.

  I disabled all the Document Cloud services that removes the possibility of signing through the Welcome screen, but the ability to do this by using the help tab is still there. But since the Cloud of Document services is disabled it gives just a clumsy error.

  Is there a way to remove this choice in the Help menu?

  

  Use of the registry keys to disable the help of more > connect / disconnect

  For continuous Build:

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Adobe Acrobat\DC\FeatureLockDown]

  "bSuppressSignOut" = DWORD: 00000001

  For the classic Build:

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Adobe Acrobat\2015\FeatureLockDown]

  "bSuppressSignOut" = DWORD: 00000001

  by Karan Malik November 18, 2015 10:32

• Disable the connection / disconnection (Adobe Acrobat DC)

  How can the option "connection / disconnection" (Menu: help > login / logout) are hidden / disabled (Adobe Acrobat DC)?

  Currently, the following data in the JavaScript file is stored:
  app.hideMenuItem ("DetectAndRepair");
  app.hideMenuItem ("OnlineSupport");
  app.hideMenuItem ("LearnProduct");
  app.hideMenuItem ("About");
  app.hideMenuItem ("AboutAdobeExtensions");
  app.hideMenuItem ("endAboutPlugInGroup");
  app.hideMenuItem ("SystemInformation");
  app.hideMenuItem ("endGuideGroup");
  app.hideMenuItem ("endUsingGroup");

  Or could "SignIn / Sign Out ' (Menu: help > connection / disconnection) are disabled in the registry?

  Use of the registry keys to disable the help of more > connect / disconnect

  For continuous Build:

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Adobe Acrobat\DC\FeatureLockDown]

  "bSuppressSignOut" = DWORD: 00000001

  For the classic Build:

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Adobe Acrobat\2015\FeatureLockDown]

  "bSuppressSignOut" = DWORD: 00000001

  -Karan

• Wireless can not detect the connection my TP Link router (SSID)

  Hello

  I bought Pavilion G4 - 1346tx Notebook PC last Sunday(15/04/2012).

  Since then, it cannot detect/find my ssid from my router. any other device inside the House can detect and connect. only my laptop cant. My Wifi card model: Broadcom 4313GN 1 x 1 adapter Wifi 802.11b/g/n

  I tried to change my router mode and etc2, always without prevail. I downloaded the driver with the latest version (5.100.82.82 of the HP website) that the previous stock (not sure which version) are still not.

  Please help me with this. I read two or three theme with the same problem and the solution, but the solution link is broken or can not find the driver. Help me ~ ~ ~

  Thank you. Appreciate the help...

  Solved in Paul_Tikkanen to:

  WiFi problem solved

• How to disable the connection passes by Satellite C55D-B5308

  Hi all

  I need help for Toshiba Satellite C55D-B5301 with window 8 , how to turn off the sign - in password everytime I turn on my laptop. Doing research on the web, but so far find any results.

  The top of the tower for use domestic only.

  I thank once again.
  Thomas

  Hi Thomas

  You want to cancel the BIOS password? Or just Windows password that you need to connect?

• Re: Disabled the connection Wireless on Win 7 - Portege R600

  I installed Windows 7 (new installation) on Toshiba Portege R600 laptop and the built in 3 G modem does not work.
  When I run Toshiba Wireless Manager, he wrote "the Radio is off. To activate, activate Mobile switch. ».

  I'm sure that this switch is on, but pass connections wireless using Fn + F8 does not work then maybe it is off but I can't allow it. I have installed all updates of drivers such as: Wireless, Wlan driver manager.
  BT Stack, etc.

  Does anyone have an idea?

  Hello

  Wait a minute;
  You want to activate; Modem WiFi or 3G?
  Please note that WiFi is not 3G modem.

  Don't forget that you have chosen and activated the modem 3G and not the WLan.

  Welcome them

• How to disable the connection password

  I'd like to get rid of this set, not only it ask password at startup, it does at any time wake. It's annoying to have to enter the password again and again.

  Any help is greatly appreciated.

  Thank you

  Hello

  Try the following - this function will set the system if you only have to log-in when you start the PC.

  Right-click on an empty area of the desktop and select Personalize.  Click the link to screensaver at the bottom right.  In the next window Remove the tick in the box next to "in»the logon screen curriculum vitae  Click on apply, then Ok to save the change of the parameter.

  Yet once, Windows Control Panel, click on Power Options, click on him require a password on wake-up link in the left pane.  In the next window, click on change settings that are currently unavailable and filling in the radio button next to "do not require a password.  Click on save changes.

  Kind regards

  DP - K

• disable the cisco ASA connection using only activate password via asdm

  Hi all

  How to disable the connection to my cisco asa 5520 using only activate password via asdm? I like to asdm connection using the user name and password. TIA!

  The command:

   aaa authentication http console LOCAL

  .. .will be force users accessing to ASDM (which uses transport http (s)) to be authenticated on the LOCAL database.

  You can also specify another list of defined authentication method, such as RADIUS, RADIUS or AD. (Although t wew love to leave a LOCAL method on the spot, in which case your external authentication server is not available.)

• How can I disable 'O2 connection manager' to automatically connect to the wireless network?

  Original title: I have a program installed in my computer 'O2 connection manager' it automatically connects to the wireless network, I need to disable the connection

  I have a program installed in my computer 'O2 connection manager' it automatically connects to the wireless network, I need to disable the connection to the network.

  Hi John,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  If you do not O2 connection manager, you can disable it to connect to the Internet or you can uninstall the program and check the issue.

  You can follow the steps in the link below.

  Uninstall or change a program:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  I would say O2 you back for more information in the links below:

  http://www.O2.co.UK/business/support

  http://community.o2online.IE/

  I hope that the information above helps you.