Similar Questions

• UCSM integration with the series C - non-nexus 2 k for the management?

  Is it possible to integrate the grid of series C rises (particularly C250 M2) with UCSM without using the 2248 management in accordance with this article for the C200 http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C200M1/install/ucsm-integration.html

  I guess we would be able to plug ports LOM on the C250 on a different switch IE of 3750 which would be connected by uplink to the FI 61xx. The ANC on the C250 map would be connected directly to the FI 61xx. Would this work?

  The integration guide refers only to the Nexus 2248 FEX which we do not have and I can find no confirmation elsewhere.

  Thanks in advance

  Tim

  Of course, the Nexus 2 k is similar to the IOM module (2104) in 5108 chassis.

  To keep the same logic of control plan the Nexus 2 k provides similar functionality.

  All under the Nexus 2 k will have a chassis 'rack mount '. The nexus 2 k is not a switch by saying but a 'slave' off the parent device "switch / stop host mode" (6100). A normal switch / normal typical would not work in this case.

• Looking for example of the Manager to OBTAIN with the PL/SQL source type

  Hello

  I currently have a Manager GET job with a running QUERY source type in ADR 3.0.  The call returns the number of records (hundreds, or even thousands of 10) in JSON and allows the user to navigate through the results.

  The call accepts several parameters that I convey just in the place where the clause of the query in the Manager.  Data is retrieved by the beach date (s).

  To prevent queries runaway with ranges for a long time, I've implemented a logic in the sql statement to limit the applicant.  The applicant requested an error thrown instead.  There are other limits that I'm imposing on other entries I need to provide useful errors for example.

  I would like to change the call GET use PL/SQL type instead of the type of REQUEST so that I can do validation on entries and send useful return error messages if necessary, however I can't find examples online.

  Are there any examples (or alternatives) would be greatly appreciated.

  Thank you

  Anthony

  Hello

  You can use the Pipelined functions to generate your recordset plsql and then just use a select statement of the function in the pipeline in the service definition.

• VMware Update Manager - Setup failed with an unknown error. vCenter credentials could not be validated

  Hi all

  I have my getting the error next message when I try to install VUM.

  VMware Update Manager - Setup failed with an unknown error. vCenter credentials could not be validated

  Help, please.

  Hi John,.

  Please follow the link below.

  http://www.virtualmvp.com/VMware-Update-Manager-Setup-failed-with-an-unknown-error-vCenter-credentials-could-not-be-validated/

  Thank you

  Venance

• Help please. I have tried to do some work in 12 items and am relatively new to her and kind of a mess. 1. I managed so far with very little, but have done some work. I exported a photograph of Lightroom 5 elements and h

  Help please.

  I have tried to do some work in 12 items and am relatively new to her and kind of a mess.

  1. I managed so far with very little, but have done some work. I have exported a photograph of Lightroom 5 elements and did several things with great success.

  At the end of this work, I thought that a copy of this registration in the elements would save in Lightroom, there no. What I am doing wrong? Actually, I did more than just a single photo, but I'm sure it's the principle that I must seize.

  2 when I export an image from Lightroom quite a "photography more than one batch" seems to be transferred through elements, why?

  3. as I want only a photograph to go through what I'm doing wrong.

  4 if I delete photographs in the items I'm not there they will also delete Lightroom files as well. I don't want to lose the photographs.

  5. just a general comment, I got famous with Lightroom, but seem to be fighting with the elements.

  I hope someone could help me!

  Best wishes

  Howy

  Howy,

  I have no personal experience with this, but I bookmarked it earlier:

  PS Elements/Lightroom questions

• Configuration guide for ESXi 5 (Vmnetwork, management and vMotion) with NIC 2 network

  Hello

  I have 4 NIC in Server Blade 7 (ESXI 5), would like to dedecate 2 NIC for (Vmnetwork, management and vMotion) & NIC (iSCSI traffic) 2 with equallogic SAN.

  I equallogic guide to configure ESXI with it, but how do I configure (Vmnetwork, management and vMotion) with NIC 2, my priority is excellent speed for my virtual machine, and then nothing else.

  Then just go for classic switch.

  The configuration is a lot depend on existing infra, the trunk, the physical switch for redundant network & balance, 100 or network 1GbE, no.. virtual machines and etc. If there is a new configuration, I suggest you trunk 2 x available vmnic (the vm network) to balance the load and better performance.

• I bought photoshop cc... If I have to buy the extension manager or her with my package?

  is the extension manager is free with photoshop CC or I have to buy tat also...

  I have photoshop plan photography for a year...

  If my plan has this extension handler included or not...

  The CC extensions Manager is free. You can install it via the Adobe Creative Cloud desktop application.

• Manager of customization with Server 2008?

  Does anyone know if the specification of customization Manager will work with Server 2008 model?

  When I create a new set of specifications through the wizard, there is no option to choose anything other than "windows" or "Linux".  The section below these options makes reference to a custom sysprep answer file that let me hear XP/2000/2003. Bascially Microsoft has deleted with Sysprep in 2008 (you can run a very simple, no custom version to change the SID and do an OOBE) or create an XML part that is personalized through Windows AIK. So I am wondering if it is supposed to be for 2008 too? I have a feeling that it is not. How do others are 2008 deployment models?

  Does anyone know if the specification of customization Manager will work with Server 2008 model?

  Yes, he does.

  When I create a new set of specifications through the wizard, there is no option to choose anything other than "windows" or "Linux".  The section below these options makes reference to a custom sysprep answer file that let me hear XP/2000/2003. Bascially Microsoft has deleted with Sysprep in 2008 (you can run a very simple, no custom version to change the SID and do an OOBE) or create an XML part that is personalized through Windows AIK. So I am wondering if it is supposed to be for 2008 too? I have a feeling that it is not. How do others are 2008 deployment models?

  It's the same as it was never really.  The only difference is that now you don't have to have the sysprep files copied in prior vCenter.  I have specificaitons of customization for 32-bit and 64-bit 2008 and 2008 R2.  Everything works fine.

  Good luck!

• Is - this calculation Manager works only with EPMA?

  It seems calculation Manager works only with EPMA for the application of the classic plsnning, I cannot use the module of business rule and cannot use the Manager of computing to work on business rules, is good? correct me and advise, thank you!

  Sorry I disagree

  You can use the calc for classic version 11.1.1.3 planning
  When you create a planning application in 11.1.1.3 classic, you have the option to choose if you use business rules or calc for the app Manager.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Management of errors with the return code

  Hello
  
  I set up an email notification which is the last step in case of failure and success. As I am manages all stages with a link (red arrow) KO, ODI handles any error that occurs and so there is never a return code different from 0 (success). It's great because the administrator receives an email with detailed error information, but the process is performed by an external Scheduler and IT operations wants the Scheduler must be notified by the return code if an error occurs.
  
  How can I do both: manage a mistake and will continue to receive a return code other than 0 on the command line?
  
  Thank you
  Matt

  In your package.

  For the final step before sending the mail.

  Create 2 steps (which will be the same), with both the same send email step.

  Put the green arrow of your last treatment for the first shipment of e-mail, it will be your end if no error.

  Put the red arrow of your last treatment for the second e-mail was sent, it will be your end if there is an error.
  After the mail error put another step which end in error every time, as a procedure that calls a ' select * of fgfhfju "(if you don't have a table of fgfhfju) and bind this step with a green arrow at the stage of email from error.

  You can now separate finishing way in your package, one for the error and another for the right side.

  Hoping to help.

  Kind regards

  Brice

• Firefox tab disappeared, have mysearchdial. No program of mysearchdial in installed programs impossible to uninstall. no way to manage add-ons with or without tab firefox orange

  Could not find a way to get rid of mysearchdial. no tab orange browser firefox so can't get to manage no Add ons and any program mysearchdial in the installed programs in Control Panel, so it is impossible to uninstall.

  tried to change the home page but no matter what I do, mysearch dial remains there. went to mysearchdial web page, followed their instructions, no use. Tried to run malwarebytes anti-malware and it has not seen anything like that. my browser opens really slow. The Microsoft Security Essentials is not helping either. I tried booting from the ERD, start did not find any problem. the search on my computer for mysearchdial or something unknown shows nothing. ran put utilities at the point in the registry, found nothing.

  What should I try next? Thank you very much.

  Hello

  The easiest way is probably to make a Reset of Firefox. This will return Firefox to its default settings. Your personal data (bookmarks, history, etc.) will be saved, but you will have to reinstall all your addons.

  Firefox - modules to reset and refresh settings

  If you don't arrive in the Firefox Orange menu to do the reset and then close Firefox and then hold down the SHIFT key while you open it. This will bring up a menu that gives you the ability to reset Firefox.

  The problem is that (as you've identified) there is a chance that Firefox will get hijacked again if you are unable to remove malware from your computer.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  I also suggest looking at the list of programs for starting and turning off one you don't want to or don't recognize. All that is originally from the diversion of mysearchdial is likely to be listed in the startup list, because he wants to run as soon as the computer starts.

  I hope this helps. Let me know if not.

• Problem of management of power with the Satellite S2430-402

  Every time is start my laptop, I get a message saying "%1 is not a valid Win 32 application" under the heading "E-power", thus the Toshiba power management does not load. I tried to uninstall and reinstall the software from the cd, but it does not work, and I still get the message.

  The problems began after I installed a program called Ghost Surf 2005 and ran for the first time. Since then I uninstalled but still has problems. I am running Windows XP operating system.

  Can anyone help?

  Hi Dan,.

  It seems that the software corrupted a file which is responsible for the powermanagement! There is what we call common files and it can be replace a file, the installation of Ghost surf!

  You can try to solve it with the Windows XP system restore when you set a restore point! Back to a restore point that was resolved before installing the software!

  Hans Bye

• Can not delete/remove Roxio Update Manager manually or with Add/Remove Programs, how can I remove this pogrom?

  My Roxio Creator program came with my computer when I bought it from Dell
  in September 2006. I have a Dell XPS 420 with XP Pro - SP3.
  Now if I try to open Roxio updater turns on and tries to update but
  do nothing. I've attached a screenshot of the error message. I get
  This same pop up when I start my pc and that you must use the Task Manager to get
  He go, very annoying. I would like to remove the update from Roxio
  Manager.Windows "Remove the program" fails, your site says to remove manually
  files and folders, I therefore, but always had the pop up. HELPPPP!
  Sam

  Hello

  Run the Fixit and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled

  Hope this information helps.

• Remote Access Auto Connection Manager and error with a VPN work

  I use my laptop to connect to my VPN working. It has not worked since June 24, 2010. I get a message indicating that the connection to network access device is not found. I also have a problem with the connection manager automatic remote access. I'm trying to launch and get an error code 5, unauthorized. The Auto Connection Manager remote access has something to do with the vpn access problem and if so how can I solve this problem?

  Hello hitherandthee,

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the platform of networking on TechNet. Following your question thanks for posting the link below:

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads?page=10

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem Manager multiple selection with system dialog box

  I currently have a problem with the help of system on a manager of multiple selection dialog as the code below works fine:

  multiSelectHandler {
                      status: listView1.selectionList().length + qsTr(" Clients Selected") + Retranslate.onLocaleOrLanguageChanged
                      actions: [
                          DeleteActionItem {
                              id: deleteActionItem
                              onTriggered: {
                                  var selectionList = listView1.selectionList();
                                  var selectedItem = dataModel.data(selectionList);
                                  console.log(selectedItem);
  
                                  for (var i = 0; i < selectionList.length; ++ i) {
                                      _sql.deleteClient(dataModel.data(selectionList[i]).clientID)
                                      dataSource.loadData()
                                  }
                              }
                          }
                      ]
                  }
  

  However, when it is changed to use that a dialogue system, the feature does not work and the console record results:

  selected list: undefined

  selected item: undefined

  multiSelectHandler {
                      status: listView1.selectionList().length + qsTr(" Clients Selected") + Retranslate.onLocaleOrLanguageChanged
                      actions: [
                          DeleteActionItem {
                              id: deleteActionItem
                              onTriggered: {
                                  multiSelectDeleteDialog.show()
                              }
                              attachedObjects: [
                                  SystemDialog {
                                      id: multiSelectDeleteDialog
                                      title: qsTr("Delete Clients") + Retranslate.onLocaleOrLanguageChanged
                                      body: qsTr("Are you sure you want to delete these clients?") + Retranslate.onLocaleOrLanguageChanged
                                      onFinished: {
                                          if (result == 3) {
                                              console.log("Cancelled")
                                          } else {
                                              console.log("Deleted")
                                              var selectionList = listView1.selectionList()
                                              console.log("selected list: " + selectionList)
                                              var selectedItem = dataModel.data(selectionList);
                                              console.log("selected item: " + selectedItem);
  
                                              for (var i = 0; i < selectionList.length; ++ i) {
                                                  _sql.deleteClient(dataModel.data(selectionList[i]).clientID)
                                                  dataSource.loadData()
                                              }
                                          }
                                      }
                                  }
                              ]
                          }
                      ]
                  }
  

  With the help of Roger Leblanc, it works now

  multiSelectHandler {
                      status: listView1.selectionList().length + qsTr(" Clients Selected") + Retranslate.onLocaleOrLanguageChanged
                      actions: [
                          DeleteActionItem {
                              property variant selectionList
                              property variant selectedItem
                              id: deleteActionItem
                              onTriggered: {
                                  deleteActionItem.selectionList = listView1.selectionList()
                                  deleteActionItem.selectedItem = dataModel.data(selectionList);
                                  multiSelectDeleteDialog.show()
                              }
                              attachedObjects: [
                                  SystemDialog {
                                      id: multiSelectDeleteDialog
                                      title: qsTr("Delete Clients") + Retranslate.onLocaleOrLanguageChanged
                                      body: qsTr("Are you sure you want to delete these clients?") + Retranslate.onLocaleOrLanguageChanged
                                      onFinished: {
                                          if (result == 3) {
                                              console.log("Cancelled")
                                          } else {
                                              console.log("Deleted")
  
                                              for (var i = 0; i < deleteActionItem.selectionList.length; ++ i) {
                                                  _sql.deleteClient(dataModel.data(deleteActionItem.selectionList[i]).clientID)
                                                  dataSource.loadData()
                                              }
                                          }
                                      }
                                  }
                              ]
                          }
                      ]
                  }