C220M3 - implementation of MMIC SNMP

Similar Questions

• Traps to receive SNMP

  Hello.
  
  I read some posts on this subject, but I still don't understand how to set it up.
  
  [Here is the message:]
  http://communities.VMware.com/message/1916186#1916186
  ]
  
  Suppose I want to monitorize a CISCO switch, which sends snmp traps to the host where I installed the hyperic server.
  
  Its very simply to create the platform, using the snmp community and soon he will appear with his iFaces.
  I would now like to detect traps that it sends to the server.
  
  Now, dougm wrote:
  "The problem is that HQ agent must be able to bind to udp by default 162 to listen.  However, this can be changed in agent.propertieslike so:
  snmpTrapReceiver.listenAddress=udp:0.0.0.0/1620 ".
  
  But, what agent?
  I installed a local agent on the same server and I looked for this property, and I couldn't find it.
  
  Could someone explain it to me please, step by step?
  
  Thanks in advance.

  There is a difference between the implementation of the SNMP traps to be sent by the Central and the HQ to receive SNMP traps. Changes to SQL, you are talking about is to allow a hatch to be generated by an alert for the ignition of the AC, and it is a feature of the Enterprise product. Documentation on this configuration can be found here:

  http://support.Hyperic.com/Confluence/display/DOCSHQ30/enabling+SNMP+traps

  Receive traps from SNMP devices able to send them is part of the Open Source and versions of HQ company. The process by which you the configuration and use of SNMP interruptions came into HQ was not well documented, we have added new information to facilitate an implementation of SNMP trap on a HQ agent receiver and then configure the network device to act on these traps. See here:

  http://support.Hyperic.com/Confluence/display/DOCSHQ30/agent+SNMP+trap+receiver

  Other questions or comments welcome as a continuation of this thread. Specifically, some have launched around the idea that it may make sense to change the value default listening port officer breaks SNMP from 162 to 1620 (from port to port without privileges). This would allow the installation of SNMP trap receiver work as a non-root user by default and doesn't require so no change in the agent.properties file.

• TMS implemented at level 14.1.1 to 'Get SNMP community name' column does not allow NULL values.

  Hello!

  I had a TMS12.2 (via 12.6 and 13.2) to TMS14.1.1 upgrade.

  When I go to: systems > overview of the system and select all systems and all the settings, I get an error message.

  An order referred before you have a problem with the values of ip box.

  Is it possible that 14.1 upgrade does not correctly check if the empty database fields?

  How I'll fix it, did an upgrade using 14.2, or is it a sql command that must be executed

  (or some values to be defined)?

  Error details:
  Server Error in '/tms' Application.
  --------------------------------------------------------------------------------
  Column 'SNMP Get Community Name' does not allow nulls.
  Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
  Exception Details: System.Data.NoNullAllowedException: Column 'SNMP Get Community Name' does not allow nulls.
  Source Error:
  An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
  Stack Trace:
  [NoNullAllowedException: Column 'SNMP Get Community Name' does not allow nulls.]
  System.Data.DataColumn.CheckNullable(DataRow row) +2131738
  System.Data.DataTable.RaiseRowChanging(DataRowChangeEventArgs args, DataRow eRow, DataRowAction eAction, Boolean fireEvent) +5073836
  System.Data.DataTable.SetNewRecordWorker(DataRow row, Int32 proposedRecord, DataRowAction action, Boolean isInMerge, Boolean suppressEnsurePropertyChanged, Int32 position, Boolean fireEvent, Exception& deferredException) +195
  System.Data.DataTable.InsertRow(DataRow row, Int64 proposedID, Int32 pos, Boolean fireEvent) +344
  Tandberg.TMS.UI.SystemOverview.ViewSystemOverviewGrid.CreateDataSource(EmbedLinksSetting embedLinks) +6856
  Tandberg.TMS.UI.SystemOverview.ViewSystemOverviewGrid.DataBindToTMSGrid(EmbedLinksSetting embedLinksSetting) +171
  Tandberg.TMS.UI.SystemOverview.SystemOverviewView.SystemOverviewViewDataBind(EmbedLinksSetting embedLinksSetting) +196
  Tandberg.TMS.UI.SystemOverview.SystemOverviewHost.ShowModule(ModuleActions moduleAction) +115
  Tandberg.TMS.UI.SystemOverview.SystemOverviewHost.systemOverviewFilter_ModuleAction(Object sender, ModuleControlEventArgs e) +43
  Tandberg.TMS.Service.Navigation.TMSModuleBase.FireModuleEvent(ModuleControlEventArgs e) +22
  Tandberg.TMS.Service.Navigation.TMSModuleBase.FireViewAction() +34
  Tandberg.TMS.UI.SystemOverview.SystemOverviewFilter.viewButton_Click(Object sender, EventArgs e) +65
  System.Web.UI.WebControls.Button.OnClick(EventArgs e) +118
  System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +112
  System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +10
  System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +13
  System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +36
  System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5563
  

  Hi Martin,

  You see flaws CSCue22625. A fix was published in TMS 14.2.

  Kind regards

  Kjetil

• How will I know if a program must be bypassed through firewalls (SNMP Trap)

  My computer is having trouble, the upgrade from vista to windows 7. the Adviser to implementation level keeps stopping and when it finds solutions, none is found... Im going through my stuff Aureano and firewall and there is something called SNMP trap. What is - this and that I allow to bypass the firewall? In addition, what I do on the Upgrade Advisor?

  Hello

  Method 1:

   

  I suggest you consult the below the article that explains what the SNMP and traps are:

  http://support.Microsoft.com/kb/172879

  Method 2:

  For what is the Upgrade Advisor, if you believe that the firewall is blocking it ended, you can disable it and re-enable once the program is completed.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

• SNMP management.

  Hello world

  I have a doubt. How to add a device to a SNMP community?.

  I mean the community already exists and it is already monitorizing by a PC (monitoring tests are performed in implemantacion possible).  and there are several teams that are monitored, but are thought to put the other monitoring devices, which makes me wonder: how new devices could be added?  What I have to configure any what ACL?

  Greetings.

  Johnnantan,

  The SNMP community string allows to control the device.  I recommend generally that for a company, community channels will be the same for all devices allow read-only access to the devices.  You can have several platforms of different software, surveillance devices at the same time.  I usually do not define read-write community strings or have completely different channels for RW and ACL.

  The limiting factor is on the device to keep track of how many devices it may follow and the amount of information she asks monitored equipment.

  If you want to control which monitors SNMP routers/switches/servers, you can implement ACLs on the channels of the community to respond only queries snmp specific devices only if they have the correct channel.  If you have the failures of access to the log list, so you can go back and find out what is scanning devices.

  Do not forget that qureies snmp take processing power so that the more devices that monitor a router and with short times between requests will have a performance affect on the router or switch.

  Hope this helps.

• SNMP on DMS 5.2

  Hi all

  All those being implemented / activated the module SNMP on DMS?

  "The only issue that I face today, is that if I get syslong, snmp for the DMP inaccessible, I can't receive email notification.

  Won't do anything with notifications by e-mail on 5.2? »

  Please explain further...

  Only alerts for DMP are DMP outages, reboots, conflict of IP and records.   Describe what you

  mean inaccessible?

  The E-mail, Syslog, and SNMP all seem to work my setup 5.2 for the alerts listed above.

  Thank you

  T.

• SNMP change

  all,

  We have implemented ro snmp community strings on our network devices and it has been added to our nms. If we changed our channels on devices snmp ro, it will stop sending traps to our nms and must we re-learn the device again?

  Try using the command 'snmp-server host. SNMP-server host command specifies the recipient of all SNMP notifications and is used to configure the SNMP agent to send two traps or informs to multiple hosts. It is possible to use several instances of this command to specify more than one recipient of the notification.

  See the below URL:

  http://www.Cisco.com/en/us/docs/iOS/12_2/configfun/command/reference/frf014.html#wp1056809

• Not sent to OME SNMP alerts

  Hello

  I have a small problem to configure my switch PowerConnect 5448 to talk to my open Server Management Essentials.

  I set up the snmp trap as in 'Making my environment Manageable.pdf.

  And by using troubleshooting utily of OME, I am able to communicate with the switch.

  The problem is that one of the fans is out of service and I don't have any information about this at OME.

  My question is, I have to implement something more (MIB,..) in OME or switch?

  In addition, the fan was out of use before you configure snmp interruptions... but I saw that OME see events of the month of other machines before they have been implemented...
  The show snmp output is:

  See the snmp console #.

  SNMP is enabled.

  Community community-access view name IP address string
  -------------------- ------------------ -------------- ------------
  dell_ome read only OME srv IP default
                                                                  
  Dell_Network_Manager read write DefaultSuper All
   
  Group Community-String name address IP Type
  ------------------ ------------ ------------------- ------
   
  Traps are enabled.
  The authentication failure trap is enabled.

  Notifications of the version 1, 2
  Udp target address community Type to the attempts of Version filter
  Name of the dry port
  ---------------- -------- ----------- ---------- ----- ------- ----- ---------
  OME srv IP trap dell_ome 2 162 0 0

  Notifications of version 3
  Udp security target address Type attempts username filter
  Name of the dry Port level
  [0mMore: , quit: q, one line:]
                                              
  ---------------- -------- ----------- -------- ----- ------- ----- ---------
  Console #.

  I have nothing under SNMP 3 and can't seem to enable it

  show the system - part fan:

  Power supply Status: OK
  1 table of fan: OK
  Fan 2 status: NOT OPERATIONAL
  Fan 3 Status: OK

  And OME comes to shows me that everything is 'green' on this switch.

  I searched Google and Dell times but can't seem to find more details, so I ask here if someone could help me :)

  Thank you!

  Best regards

  Liliana

  Hi and thanks for the question and good detail.

  So I guess the switch is displayed correctly in the OME devices tree and when you click on it you get a bit of inventory information, etc.  And you said that health currently appears green.

  OK, so if the alert happened in the past (before the implementation in OME), then you won't see in the alert console OME.  The thing that you might have seen, is if some type of device sends the same alert repeatedly.

  You confirm that you have changed the SNMP settings on the switch to run the SNMP alerts to the IP address of the server OME?  Your message makes it look like you have done this correctly, assuming that the IP address is correct.

  For some switches, just the Act of logging in the switch will generate an information alert.  Not sure about this model.  See you new alerts in OME this switch or you have a way to generate an alert of the switch as test by logging?

  BTW, OME has no support for v3 alerts, only v1/v2.

  Thank you

  Rob

• SNMP and key performance indicators

  I have implemented SNMP card and sending traps.  When I create a KPI, which has a threshold critical, will be a generated SNMP trap when this threshold is exceeded?

  In vC Ops v5.8, would come from a SMART or CLASSIC type alert, depending on the type. You will need to just filter the emailFilter.xml according to the catch on SMTP, however SNMP is completely non-filtered, so you will get it by default. You can show abnormalities of type KPI in the alert widget as well.

  In vR v6 Ops, key performance indicators are specified in the policy, but you must create symptoms + alerts if alerts. Simple definition of KPI indicator in politics will place high important on these measures when calculated health + anomalies, but that's all as much as it works. Alerts will be generated only if you have symptoms and alerts. You can no longer show abnormalities in the alert widget. V6 takes emphasis away only anomalies and shifts the focus to the definition of the symptoms + alerts for performing more action on the environment.

• Configure SNMP source for the events of HW for IPMI sensors

  Us run Dell hardware and tested OMSA installed on ESXi5 hosts pointing to OpenManage (OME) Essentials for any interruptions SNMP. As indicated in the following Dell FAQ for OME the 9.5 troubleshooting section, to avoid massive amounts of alerts unknown on the server of the OME from our hosts ESXi5 we define the SNMP CIM for IPMI event source.

  http://en.community.Dell.com/TechCenter/systems-management/w/wiki/3265.OpenManage-Essentials-FAQ.aspx

  This article as well as VMware material and KB, any reference to the need to use the vSphere CLI to make this change, which of course works such as documented. Does anyone know if it is possible to make this change via PowerCLI? We do not want to use the vSphere CLI unless it's the only possible way as all the other configuration items that we have implemented kickstart or PowerCLI scripting.

  http://KB.VMware.com/kb/1008065

  http://pubs.VMware.com/vSphere-50/topic/com.VMware.vSphere.monitoring.doc_50/GUID-01D333E8-0A34-4F04-BB6C-D80A5FDA8CC5.html

  I was able to find the key value pair in PowerCLI where EnvEventSource/directions options, but I don't know if those who may be changed.

  If someone knows a way to do this, I would like to know how it is possible.

  Thank you.

  I think I knew that.  It seems that you have to connect directly to the ESXi host nothing to do with SNMP still, but if someone knows a way to avoid this, I'd love to hear it.  But this seems to work at the same time, but would need to change to more than one host at a time.

  ## Script function: Modify SNMP source for hardware events
  ## Usage: Connect to vCenter where host(s) reside, populate constants below and run
  
  ## Host to make changes to
  $strVMHost = "your_ESXi_5_host"
  
  ## Credentials for ESXi host(s)
  $strUser = "root"
  $strPassword = "your_password"
  
  ## Key to change value on (in case there are different key/value pairs you need to change in the future)
  $keySnmpEventSource = "EnvEventSource"
  
  ## New value for above key
  $valueSnmpEventSource = "sensors"
  
  ## Connect directly to VMHost in order to see the HostSnmpSystem object (http://pubs.vmware.com/vsphere-50/topic/com.vmware.wssdk.apiref.doc_50/vim.host.SnmpSystem.html)
  Connect-VIServer -Server $strVMHost -User $strUser -Password $strPassword
  
  ## Get the VMHost .NET View object and select only the HostSnmpSystem object
  $viewHost = Get-VMHost -Server $strVMHost -Name $strVMHost | Get-View -Property ConfigManager.SnmpSystem
  
  ## Get the HostSnmpSystem object
  $viewHostSnmpSystem = Get-View -Id $viewHost.ConfigManager.SnmpSystem
  
  ## Create new empty HostSnmpConfigSpec (http://pubs.vmware.com/vsphere-50/topic/com.vmware.wssdk.apiref.doc_50/vim.host.SnmpSystem.SnmpConfigSpec.html)
  $specHostSnmpConfigSpec = New-Object VMware.Vim.HostSnmpConfigSpec
  
  ## Populate newly created HostSnmpConfigSpec object with current values
  $specHostSnmpConfigSpec = $viewHostSnmpSystem.Configuration
  
  ## Modify desired value for the matching key
  ($specHostSnmpConfigSpec.Option | ?{$_.Key -eq $keySnmpEventSource}).Value = $valueSnmpEventSource
  
  ## Reconfigure the SNMP agent to take the new value
  $viewHostSnmpSystem.ReconfigureSnmpAgent($specHostSnmpConfigSpec)
  
  ## Disconnect from VMHost
  Disconnect-VIServer -Server $strVMHost -Confirm:$false
  

  Let me know if it works for your environment that we not use SNMP in ours, so I didn't do extensive testing.

• No VMWare SNMP subagent running

  Hi people,

  I just installed ESX4 and I'm tryimng to configure my snmpd.conf to allow monitoring nagios host in.

  I was running from ESX 3.5 with this file snmpd.conf

  # Sample snmpd.conf containing the entries of the VMware MIB module.
  # This is a simple snmpd.conf that can help you test SNMP.
  # It is not recommended for production use. Consult the
  pages of snmpd.conf (5) # to implement a secure facility.
  sysContact root@localhost (snmpd.conf edit)
  sysLocation room1 (edit snmpd.conf)
  rocommunity ro
  public trapcommunity
  trapsink localhost
  # VMware MIB modules. To toggle the elements of VMware MIB
  # Add/Remove the following entries.
  DLMod SNMPESX /usr/lib/vmware/snmp/libSNMPESX.so
  ~
  ~
  'snmpd.conf' 15L, 530C

  Now that I have installed ESX4 the snmpd.conf file is very different, so I renamed and put the above in place.

  It doesn't work and I get an error indicating ".

  "Error: no VMWare SNMP subagent (vmware-snmpd) running"

  I am not very practical when it comes to this particular configuration... any suggestions?

  What the default snmpd.conf file looks, but I wasn't sure what I should change...

  ####
  # Everything first, map the name of the "public" community in a "security name".
  Community of origin # sec.name
  com2sec notConfigUser default public
  ####
  # Second, to map the name of the security in a group name:
  # groupName securityModel securityName
  Group notConfigGroup v1 notConfigUser
  V2c notConfigUser notConfigGroup group
  ####
  # Thirdly, create a view to leave the group are entitled to:
  # Make at least snmpwalk - v 1 localhost - c public fast system again.
  # name incl/excl subtree mask (optional)
  view systemview inclus.1.3.6.1.2.1.1
  view systemview inclus.1.3.6.1.2.1.25.1.1
  ####
  # Finally, give the group read-only access to the view systemview.
  write the prefix of the context of group # Read sec.model sec.level notif
  access notConfigGroup "" any systemview exact /noauth none none
  # -

  ---

  You must enable SNMP using the rcli vicfg-snmp command. http://www.VMware.com/PDF/vi3_35/esx_3/r35u2/vi3_35_25_u2_rcli.PDF

  http://pubs.VMware.com/vsp40u1_e/wwhelp/wwhimpl/js/html/wwhelp.htm#href=Admin/t_configure_snmp_for_esx_esxi.html

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• How much time does it take for validation in 2 steps activate once implemented?

  I finished 2 steps to verify Setup, has been reduced to the "Manage your account" page on the site appleid and saw that my secure devices are not listed. Then I typed the button 'Edit' for this article and was released. When I joined, it seemed 2-step audit is more has been implemented, so I set up a second time, receives a different recovery code. Not really thinking, I typed in "Edit" and was even once disconnected.

  Signature, looks like 2 step verification has been cleared again. I try again or should I just take awhile 2 step check to activate after installing?

  I have no idea of what the community of this post to do so please forgive me if I posted in the wrong place.

  Are you following the steps described here.

  https://www.CNET.com/how-to/how-to-set-up-two-step-verification-for-your-Apple-i d.

  Frequently asked questions about the audit in two steps for Apple ID - Apple Support

• How can implement you not with Tim Capsule and AirPort their simulation on the iMac?

  Hello

  How can implement you not with Time Capsule and AirPort their simulation on the iMac?

  I don't know what you're asking.

  AirPort Extreme is a wireless router.

  A Time Capsule airport is an AirPort Extreme with a built-in hard drive for data storage.

  An iMac is a Mac computer.

  An iMac is not a wireless router, so he is unable to perform the functions of a wireless router.

• Why Apple Watch cannot show the heart rate all implement open outdoor execution on?

  Why Apple Watch cannot show the heart rate all implement open outdoor execution on?

  Technical data has shown that he can do, but in fact can not?

  It is not good advertising. During the race I'm not for the convenience of drag any function. It is wet.

  This link should help you your heart rate. What it means, and where on Apple Watch you will find. -Apple Support