No VMWare SNMP subagent running

Similar Questions

• VMware Tools stops running

  Hello

  I have an ESXi 5.1 U1 installation with a guest Windows 8.1 vSphere and problems with VMware Tools on this client. VMware Tools is installed, and that client vSphere summary screen says that it is running and the current, but after a certain time (do not know exactly how long, but I guess 20 minutes) VMware Tools stops running, resulting in people not being able to use remote desktop to connect to the host. As soon as I open the console to the guest in vSphere Client and click on the login screen then VMware Tools begin to run again and people can use remote desktop.

  I tried to reinstall the VMware Tools, but that had no effect. Any ideas?

  Thank you

  Richard.

  This sounds like the windows 8.1 client goes in some form of hibernation... you have all power saving / hibernation configured?

• VMware 6.0 runs Satellite L300-14 X?

  Can someone tell me if VMware 6.0 will run on a toshiba Satellite L300-14 x, intel celeron 2.13 ghz processor and 4 GB of memory?

  I need to install 2 Windows Server 2003 and of Windows XP 1 client on the virtual computer?

  Please notify

  Hello

  Why not this Virtual Machine software should run on the L300 Satellite?
  Right now I see no serious reasons why you shouldn't try to install this application and try to run on the L300.

  Bring him back and after a few experiences with this software on your laptop L300.

  Greetings

• VMWare agent that runs on VCenter with Vfoglight 6.1

  Hello
  I'm getting following error in the log of the collector. Thus the Vcenter server does not appear in the console VFoglight.
  2010-06-21 17:25:14, 729 [9] ERROR Collector - OnStartWorker - Error in FoglightHost.OnStartWorker: {0}
  System.ServiceModel.AddressAlreadyInUseException: HTTP could not register URL http://+:8000/FoglightEngine/basicHttp/ , because TCP 8000 port is used by another application. ---> System.Net.HttpListenerException: the process cannot access the file because it is being used by another process
  at System.Net.HttpListener.AddAll)
  at System.Net.HttpListener.Start)
  at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen)
  -End of the exception stack trace internal-
  at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen)
  at System.ServiceModel.Channels.TransportManager.Open (TransportChannelListener channelListener)
  at System.ServiceModel.Channels.TransportManagerContainer.Open (SelectTransportManagersCallback selectTransportManagerCallback)
  at System.ServiceModel.Channels.TransportChannelListener.OnOpen (TimeSpan timeout)
  at System.ServiceModel.Channels.HttpChannelListener.OnOpen (TimeSpan timeout)
  at System.ServiceModel.Channels.CommunicationObject.Open (TimeSpan timeout)
  at System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen (TimeSpan timeout)
  at System.ServiceModel.Channels.CommunicationObject.Open (TimeSpan timeout)
  at System.ServiceModel.ServiceHostBase.OnOpen (TimeSpan timeout)
  at System.ServiceModel.Channels.CommunicationObject.Open (TimeSpan timeout)
  at System.ServiceModel.Channels.CommunicationObject.Open)
  at FoglightAgent.WinService.FoglightHost.OnStartWorker (Object sender, DoWorkEventArgs e)
  2010-06-21 17:25:14, 854 [9] INFO Collector - OnStartWorker - output FoglightHost.OnStartWorker
  And connector obvisouly fails with the following error.
  2010-06-21 17:25:45, 761 [recovery-collector settings] ERROR VirtualESXAgent.BaseCollector - CommunicationException: unable to extract the data from the collector collector settings: the purpose of the communication, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state. Make sure that the collection agent service is running
  2010-06-21 17:25:45, 776 [recovery-inventory] ERROR VirtualESXAgent.BaseCollector - CommunicationException: impossible to extract the data of inventory of the collector: the purpose of the communication, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state. Make sure that the collection agent service is running
  2010-06-21 17:25:45, 776 [5] ERROR VirtualESXAgent.Agent - inventory was empty on records, planning an update
  Kind regards
  Paresh

  The problem is that the port 8000 on the server running the VMware vFog agent. This is the port that the service Colectionneurs & connector communicate on.
  The configuration files need to be changed and the port changed to a port that is not taken.
  Foglightagent.WinService.exe.config
  
  
  
  Virtualagent.exe.config
  
  -Larry

• Need help with VMware Player to run!

  I've been using VMware Player 7.1 successfully for some time, but my drive hard host started making noise, so I installed a new SSD drive as drive C on the host computer.  My old hard drive installation was 8.1 for Windows 64-bit, but needed to be cleaned, so I did a clean install of Windows 8.1 64 bit on my new SSD for the host.  My guest OS (8.1 64-bit Windows) has been installed on drive E, then I'm not touching this player.  I then installed VMware Player 7.1 and all is well.  However, when I now run VMware Player 7.1 and try to open my (8.1 Windows 64-bit) guest OS, he says now that the Intel VT - x is disabled.  I've never touched the BIOS at all, but to check I went into the BIOS and Intel Virtualization is always on because it has been.  My system is a motherboard ASUS Sabertooth with an i7 processor and 16 GB of ram.

  So I rechecked everything in the BIOS and made sure the virtualization is enabled.  What else can I do to get VMware Player 7.1 running?  Help, please!

  The log file created when I tried to run the guest operating system is attached.

  Thank you

  Abby

  It is indeed strange that there is a difference with no changes to the BIOS. In any case, other messages in the forums, it seems like some antivirus/end point protection applications can cause these issues (see, for example, binary translation is incompatible with the long mode). You have already installed this application?

  It might be interesting to see vmware.log from the virtual machine HARD disk.

  André

• VMware-cmd removesnapshot running 24 hours +.

  We have a server running ESX 3.01 yet, we are about to replace the hardware and update everything.  Through this process of preparation, I came across a virtual machine that has some old (2009), HUGE shots that must be engaged.

  Due to the problems I have experienced instant removing the console in the past, I decided to run it from the command line.  I ran the vmware-cmd command to delete snapshots, connected to an antibody secondary ssh session to look at the delta files.  I'm at a point now, where all the delta files are gone from the directory, but stereotypes are always listed in the vmsd file.  In addition, the session of vmware-cmd is not yet returned to a command prompt (or it is blocked or even do something?)

  He has been running (or suspended) for about 24 hours now.  I was about to kill this process and try to start the virtual machine - but I decided to post here everything first.

  Everyone knows this?

  Thank you

  SB

  I can't tell you with certainty what happened. However, because the delta files are gone, it should be reasonable to assume that the snapshot cleanup process is completed and the vmware-cmd command can simply wait for a callback that will probably never come because of timeouts for example. I would go check the VM .vmx file to see if it has been updated correctly with files hard base and then kill the process. If you wish, you can also take a glance to the file of vmware.log of the virtual machine that must contain entries on the consolidation of the snapshot. Don't worry too much about the .vmsd file, it is a text file that contains the information displayed in the Snapshot Manager. If all snapshots are gone, you can delete this file.

  André

• Lose the snapshots created by vmware fusion when running in vmware player?

  Hi all

  At home I have VMWare Fusion on a Mac and have created a lot of photos;

  Unfortunately I'm away and stay with a friend who has that VMWare Player.

  I'll lose all the clichés that I created if I run my last VM at his computer, whereas VMWare Player have the ability to single snapshot?

  Thank you

  No, you won't lose the snapshots. However, you will not be able to manage, so the virtual machine will run the latest snapshot (and grow this hard snapshot file).

  André

• VMWare Player will run Mac OS x 7?

  Hello, my question is if I install VMWare Player on my Windows 7 computer, I'll be able to run Mac OS x 7?

  Thank you

  It is a violation of Apple licensing to run their OS on non Apple hardware.  And there are even limits on which versions and flavors that can be run as a virtual machine.  We cannot help you here, or VMware could get in legal trouble with Apple.

• How can I test that VMware Tools is running?

  In my current project, I occasionally see this error:

  SOAP Fault:
  -----------
  Fault string: Cannot complete operation because VMware Tools is not running in this virtual machine.
  Fault detail: ToolsUnavailableFault
  

  even if I had just dumped this object which seems to have the same appearance as the tools are running or not.

  vm->config->tools: $VAR1 = bless( {
                   'afterPowerOn' => '1',
                   'afterResume' => '1',
                   'beforeGuestShutdown' => '1',
                   'beforeGuestStandby' => '1',
                   'syncTimeWithHost' => '0',
                   'toolsUpgradePolicy' => 'manual',
                   'toolsVersion' => '8295'
                 }, 'ToolsConfigInfo' );
  

  The Summary tab for the relevant vm vSphere Client seems to agree with what I see on the command line, indicating 'OK' when I do not see this error and "Does not work", when I see this error.

  I have clues as to how do I test this and to turn tools on or off if necessary.

  Thank you

  Hugh

  I haven't tried this in Perl, but I think what you want to check for is 
  
  vm->guest->toolsRunningStatus
  
  If that value is "guestToolsRunning" then the Tools should be running.
  

• VMWare Workstation yourself running 64 bit VMs

  Hello

  I am runnng VMWare Workstation 7.0 on Windows 7 64 - bit processor. I want to create a virtual machine with Windows 2008 64 bit.

  Is it possible to create virtual computers running 64-bit OS?

  Hello

  I recommend you to carefully check this post. It maybe helps you

  Best wishes / Saludos.

  Pablo

  Please consider to assign all useful or correct answer. Thank you!! - Por favor considered premiar any respuesta correcta o util. ¡¡MUCHAS gracias!

  Virtually noob blog

• Disadvantages with VMware Workstation (7) running on a server rack Xeon?

  Hello

  We intend to run VMware Workstation on my company (7) on a server rack Xeon based (the next generation of Xeon, i.e. Beckton/Nehalem-EX, with 8 cores, planned in the 1st quarter of 2010), and then access all of these virtual machine guests (based on Windows, both the server and desktop kind/flavor) by separate remote desktop connections direct to them.

  I had a very hard time, trying to find out if there is (large or small) disadvantages with this approach?

  We do not want to use Vmware Server for this, because its characteristics (for example with respect to snapshots) are lower than those of VMware Workstation, and nor do we want to use ESXi, because we always want to run Windows as a host on the server operating system.

  Is VMware Workstation our best choice then, and there will be no significant disadvantage? I think it's as if there is a missing in the VMware portfolio, product i.e. namely I miss a server product with all the features of VMware Workstation, which still runs on a different host OS, what am I?

  In any case, again, the main question is:

  This plan of ours is stupid, and in this case how should we best solve it? Is there really an advantage by using VMware Server instead of VMware Workstation in this situation and in this case more exactly what?

  Any input or answers will be greatly appreciated! Thanks in advance!

  VMware Workstation on a good Windows installation will do you fine.

  Ideal if you conclude that the MS-host in this day you don't need no matter what Antivirus or firewall.

  Then such a facility will do what you expect.

  I wouldn't consider VMserver - workstation surpasses VMserver my experience

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• VMware Fusion 3 running extremely slow...

  First of all, my MacBook Pro:

  Core 2 T9300 2.5 GHz

  4 GB memory

  250 GB SATA HARD DRIVE

  Snow Leopard 10.6.1

  VMware Fusion 3.0

  When I was with Leopard and VMware Fusion 2.x, the virtual machines run fast, but now they are extremely slow. BTW, I have activated the 64-bit kernel.

  I managed to find the reason, it's because the "mds" in the host OS process, is not a problem of the guest operating system. Everytime I turn on my Windows XP in VMware, "mds" will appear in the activity monitor window, and account for about 2% ~ 20% CPU, hard drive usage becomes noisy at the same time. What I could do is just wait, after about an hour, mds will be 'calm down' and my MBP back alone. But, when the next time I turn on my virtual machine, "mds" will appear again...

  "Mds" makes me crazy... I tried to google for answers, but no result.

  Anyone faced this problem too? Or someone knows how to solve the problem? Thank you!

  We found just a bug where in some cases fusion 3 will be a spotlight on every launch search (it is supposed not only to occur once), which seems to be exactly what describes this thread. You can work around this bug open Terminal.app and running

  defaults write com.vmware.fusion PLLibrarySpotlightSearchDone -bool YES
  

  Please let us know if that fixes things (or if not).

• Can anyone confirm if host vista can go to sleep when vmware workstation is running?

  I posted a question on my vista machine not to fall asleep when vmware is running. I have all the answers.

  Now, I would like to ask differently. Can anyone confirm or deny that your vista machine to sleep when vmware is running. Please indicate your vista edition and vmware workstation version. Please also note that VMware is running any active guest of the OSes. In my case, even if vmware won't be meme si vmware ne s' execute running no matter what guest OS, the machine won't go to sleep sleep once expired. Strange - if you just click on 'Start' - & gt;... - & gt; "' Sleep menu", the machine will sleep very well, even if vmware is running some OSes comments.

  Chuck, I use Vista Business SP1 with VMware Workstation 6.5.2 and he falls asleep without problem with or without a running virtual machine.

  You configure the duration of sleep through Control Panel > plan Options of food, then by setting it to this power, or are you using some sort of freeware Vista shutdown/sleep timer app?

  Dave

• What VMWare used to run W2K Server in Windows Server 2008 x 64?

  We have recently replaced a 32-bit Windows Small Business Server with Standard Windows Server2008 x 64 but find that a particular database will not work on a 64 bit OS.

  The Publisher of the application said to run it on Windows Server 2000 or 2003 on a virtual machine, and we are just lucky to have a clean and unused copy of Windows Server 2000.

  I used MS VirtualPC, but have never used VMware.  Should what version of VMWare I use?  Preferably a free version?

  In addition, any info or links to information, which would help the installation process would allow me to save time and greatly appreciated.

  Thank you

  S

  Hello

  I don't really expect VMware Server 1 for work on Wk28 x 64... the product is not updated on this operating system.

  Windows 2008 is perhaps editable so that it will work... but then why bother using the new operating system if you pass on the new security model. The right way to go indeed uses VMware server 2 because it will also mean that you have a supported configuration.

  Where or where did I go wrong turn?  Was it because I was bottle fed as a child, or maybe when I turned my teacher of class 2 with a pistol to water... but I digress.

  The documentation that I found on the VMWare Web site does not appear to be any reference to the creation of a host name, the user name or the password during the Setup process.  Of course, I missed something along the line.

  VMware server 2 has all of its normal maintenance and the remote in the browser console.

  After installation you can access the console via https://127.0.0.1:8333

  Instead of localhost (127.0.0.1) address, you can also try the real IP address of the computer or host name.

  I expect that there is a menu option to access the management interface in the start menu under Windows 2008, but apparently not. Guess I have to implement on my both Win2008 box afterwards... The account to use to log on is the administrator account on your windows machine.

  No guidance to properly install VMWare Server 2 (or same v1), and then creating a new virtual machine would be appreciated.

  I suppose you start with something like "Everything first uninstall v1 and start v2 installation process".  Then what?

  Then try opening the administration interface of Vmware Server via the browser and if that doesn't work, post here.

  --

  Wil

  _____________________________________________________

  Visit the new VMware developers at http://www.vi-toolkit.com wiki

• VMWare vCenter Server runs on AMD Quad Core A8 1.9 ghz CPU, 6 GB Ram?

  I want to practice and try to Setup AMD Quad Core A8 1.9 ghz CPU, 6 GB Ram, 1 TB HD, but it gives me an error that "processor is not supported to check with your provider"

  I have the license version Win8, Samsung LEPTOP

  I use vmware workstation 9 and install win 2008 guest OS and configure vcenter server in 2008

  But it on Windows 2008 is a 64-bit version? If I remember correctly that came in 32 and 64 bit flavors.

  I recommend you to install a Windows 2008 R2 instead, coming only in 64-bit.

  Linjo