C75-A-12 satellite - after Win8.1 update, 2 ports USB + cam does not

Similar Questions

• After a routine update of Windows, HP officejet does not print, software and drivers check out ok

  Installation and mounting and print worked fine for weeks.

  Then I downloaded a regular update of windows, and there's no printer now listed.

  I try to add a printer, and it does not work.

  Control of HP says I have the right driver and the software loaded - I uninstalled and reloaded everything... nothing!

  Everyone I have a problem / have a solution?

  Hello, I have the Officejet 4630, sorry, I forgot to say, perhaps.

  After you uninstall a bunch of updates to security windows and re - install, everything is now fine.

  Thank you

  Jennifer

• After Firefox 13 update of Gmail and Twitter does not

  I've updated to Firefox 13 and now Gmail and Twitter are very slow or not to load any. I've updated my plugins, I cleared the cache and cookies. What can I do else? Thank you.

  Hello, some other users have reported the same questions for gmail & twitter with activated SPDY (which has been introduced in firefox 13).

  enter Subject: config in the address bar and search for the preference named network.http.spdy.enabled and activate false by double-clicking on it - this disables the spdy Protocol. Please see if that works and a report. Thank you!

• USB ethernet does not work after update to Mac OS sierra

  Hello

  I use end of 2014 Macbook pro 15 "running Mac OS Sierra.

  Before the update for sierra, Captain, EL on OS USB ethernet has been working well, but after that the update for Sierra USB ethernet does not work, "showing the cable disconnected.

  Please advise and thanks in advance.

  Do you use the Thunderbolt Apple > Ethernet card?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  The adapter works in recovery mode?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Update my wireless network device does not work after installation of Software Distribution Service 3.0

  After the installation of Software Distribution Service 3.0 update my wireless network camera does not work how do I uninstall Software Distribution Service 3.0

  How did you receive the update?

  Was it via Windows Update or Microsoft Update?

  Before the changes are made to your computer, the system restore points are made. This is so that you can go back in case an update causes problems.

  Follow these steps:

  1. click on the Start button

  2. click on accessories

  3. click on system tools

  4. click on system restore

  5. click on next

  6. in the calendar that appears, select the one which refers to Software Distribution Service 3.0 and click Next

  After the collection of certain data, the computer will restart, and the update will be gone.

  Hope this helps

  Post back if necessary

  ___________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Web Cam does not work on my Satellite Pro C850-10 t

  Hey, I have a Satellite Pro C850-10 t and my web cam does not work. Whenever I try to use it, it is said that the built-in cam is not connected or activated. I tried to download the drivers from the site web cam, but it does not solve the problem

  What should I do?
  Thanks in advance :D

  Do you use the preinstalled original WIN7 64-BIT HOME PREMIUM?
  Webcam is entered correctly in the Device Manager?

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• After the last update of Firefox, youtube videos do not play. The answers I've found are not relevant or too complicated.

  After the last update of Firefox, youtube videos do not play. The answers I've found are not relevant or too complicated.

  Hi Cbella, YouTube is generally used with an HTML5 player, who is a player who does not use a plugin video in MP4 format (for example, it does not use the Flash plugin).

  Now, I based this assertion on Windows, Mac may vary.

  Could you do two tests for me?

  Test #1:

  To verify which player you see (which does work), try a right click or Ctrl + click on the YouTube Player and check the "context menu" that rises. If it's the Flash, there will be a menu short, referring to the Flash on the last line. If you do not see that, if you get a regular menu of Firefox, it's probably the HTML5 player.

  Are what player you?

  Test #2:

  If you open the following test page, which videos to play?

  http://www.quirksmode.org/HTML5/tests/video.html

  • The video "H.264/MP4" play?
  • The video "WebM" play?

  Thank you.

  Also, you can check if your Flash plugin is up to date? You can use the site Mozilla Plugin check for this (please ignore the other plug-ins page wants you to update at the moment avoid making the situation more complicated):

  https://www.Mozilla.org/pluginCheck/

• After the recent update to iTunes, my computer is not recognized in iTunes game.

  After the recent update to iTunes, my computer is not recognized in iTunes game.  I am subscribed to iTunes game. My library shows the status of iCloud, and yet when I go into the Match iTunes from the iTunes store, it asks if I want to add this computer.  When I connect and ask the computer to add, nothing happens.  Shouldn't iTunes recognize my that my computer is a Subscriber?

  Hello

  Connect to iTunes. Go to Menu > iTunes > Preferences > general and make iCloud sure music library is checked.

  Jim

• Re: Satellite L300 - camera does not work after upgrade to Win7

  As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

  There is no exclamation point in the system.

  Satellite L300 (PSLB8E)

  Hello

  What happens when you start the webcam app?
  All programs-> Toshiba-> webcam

  Did you install other 3rd software part as for example the Skype that could access the webcam?

  Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
  Start Skype for example, check the settings in Skype webcam chose correctly.

  It would be really interesting to know if the other software would be able to use the webcam.

  By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
  Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

• normal flash camera does not work after the update of Marshmallow to lenovo turned vibe

  after update of lenovo vibe turned 6.0 when open fash normal camera does not work and I can't do it open or closed or outomatic is disable

  but when open video camera flash is working and also with any another application to camera is working normally

  How can fix this?

  reset the camera settings after Flash open ligt

• recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  Please visit http://www.microsoft.com/genuine/ and click the Validate Windows button, then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  1B. double-click the executable file to run the tool.

  2. after running the tool, click the Windows tab, and then click copy in the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new thread in the following forum and paste the results of the WGA diagnostic data in a post detailing the problem: http://social.microsoft.com/Forums/en-US/genuinewindowsxp/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Laptop black screens after the latest updates of windows... wil not booting in SafeMode (black screen).

  Windows Vista 64-bit... Black laptop after the latest updates... windows screens will not boot into SafeMode again black screens.

  Hello

  I would suggest trying the following methods and check if it helps.

  
  Method 1:

  Try the steps in the following Microsoft article and check if it helps.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem:

  http://support.Microsoft.com/kb/934540

  Method 2:
  You can refer to the link below and check the drive for errors:
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Warning: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  If the methods mentioned above do not solve the problem, then it would be best to contact the manufacturer of the computer.

  For more information, see the following Microsoft article and check if that helps.

  
  Why my screen is black when I start Windows 7? (Applies to Windows vista)

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista

• Satellite L300D: After the installation of Win 7 new webcam does not work

  I have toshiba satellite l300/l300d laptop series I just install windows 7 Home premium software camera assistant does not work how can I solve this problem my guide thank you

  Hi rahmmar,

  > software assistant camera does not work
  Does that mean exactly?
  You get an error message during installation or what exactly is going on?

  On the Toshiba driver download page, I was able to find a driver of the webcam for Satellite L300D and Windows 7 32-bit. Have you tried this version?

• Satellite L300 - Vista - Touchpad and USB mouse does not.

  Hello

  Well well after hours of trying allsorts, I post here...

  Been given the laptop for repair as the touchpad no longer. No problem "I thought", simply plug a mouse usb to help me get around and re - install the touchpad... what a joke.

  On the right, the USB mouse is recognized as a hid device and work, according to the Manager of devices, but not when you move it... nothing...
  The Touchpad is listed as a Synaptics ps/2 touchpad and signals a Code 10 in section mouse device as well as listed as a hid and fully functional usb mouse Manager.

  Right... I have...
  Listed all devices, even the hidden nonpresent (devmgr_show_nonpresent_devices) and removed everything only account of any mouse, keyboards, etc...
  uninstalled the software synaptics via the program Panel.
  Restarted the laptop, and it starts with the touchpad is ranked again code 10 with the version of windows drivers.
  Drivers up to date using two different files of Toshiba for the touchpad, still Code 10
  Still, the USB mouse does not either.

  Someone enlighten me please on a fix for this...

  Hello

  Really strange what s my friend because normally a touchpad driver update should solve the problem.

  In any case, have you ever tried to use the Toshiba Recovery disk? Maybe it s just a software problem and a few important Windows files are destroyed or don t work properly. Reinstall Windows using the recovery disk Toshiba takes only a few minutes and there are already all the drivers and tools integrated. With these parameters (factory settings), the touchpad should work properly, and if not the touchpad or the motherboard needs to be replaced maybe.

  Good bye