Laptop black screens after the latest updates of windows... wil not booting in SafeMode (black screen).

Similar Questions

• Computer freezing after the latest updates of Windows

  Unfortunately the windows restore has no restore points and was not yet active.  AAAAAAHHHHHHH.  I just got this computer last month and it's been great, and now I'm back to being a tech.  Large.

  Hello

  ·         Who were the latest updates installed on the computer?

  ·         The computer hangs or crashes the browser when it is on YouTube?

  You can check the same thing using the link below.

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  You can try to uninstall and reinstall the updates manually and check if this helps solve the problem.

  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

  To install the updates:

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Check if there is information in Event Viewer which may help us to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• PunkBuster not working after the latest updates of Windows

  Hello

  Since I installed the latest updates for Vista x 64, I continue to pounce on COD5 with this exception:

  Application CoDWaWmp.exe, version 1.5.1220.0, time stamp 0x4a5241f6, failed module pbcl.dll, version 0.0.0.0, time stamp 0x4a5cb487, exception 0xc0000005, fault offset 0 code x 00026914, 0x5d0, failing application start 0x01ca36117f69c74e process id.

  The problem seems to be related to the Punkbuster client. Before the latest updates, I don't have a problem.
  For Windows XP, a similar problem was introduced with KB917422 (in connection with Kaspersky anti virus I think).

  Any thoughts on this topic?

  Best regards, Wilbert

  SRY, but if PB doesn't work, you don't have to format your PC.
  Just try to reinstall PB.

• Satellite L350-262 touchpad stopped after the latest updates of windows

  Hi all

  Last Friday, when closing close to 11 updates have been applied to Windows 7 (32 bit). When I got to the top of the laptop this morning the touchpad has stopped working and I had to plug in an external mouse.

  So far I tried to download the driver from the site of Toshiba, uninstalling the driver, reboot and then reinstall the driver and it did not work.

  Not yet opted for a restoration of the system, before I try that someone else had this problem?

  Any ideas on how to cure?

  Thank you

  Are you sure it is not disabled?
  Check the FN + F9 key combination

• I installed the latest update of Windows. All updates. However, I find myself with the yellow warning icon in the bar of tasks and install when closing down.

  Description of the problem: a few days ago I installed the latest update of Windows. All updates, or so I think by the Windows Update Web page telling me so. However I find myself with the yellow warning icon telling me the KB2729450 update is ready on my computer and needs installation. However, the web page says that it successfully installed. I see the update in Add/REMOVE programs. I've deleted and reinstalled but still have the icon telling me to install it. Even when you turn off the computer the message is for me to install, but I think that it has already installed successfully. How can I get rid of these warnings?
  Operating system: Windows XP

  Hi depreciated,

  Thanks for posting in the Microsoft community!

  If I understand correctly, you receive a warning to install the update, even if it has already been installed. I'll try to help you the question.

  (1) did you make any changes before the show?

  The update that you are warned with seems to be question of the .net framework. I have you provided the link that will repair your .net framework.

  Microsoft .NET Framework repair tool

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30135

  Note: after using the .net Framework cleanup tool, please install all .net Framework components.

  Let us know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• After the last update of windows, I now shadows behide the fonts & photos

  After the last update of windows, I now shadows behide the fonts & photos. What has caused this & I can fix it?

  Hello

  What is your Windows operating system?

  Right click on my computer

  Select Properties

  Select advanced system settings

  Running, click on the settings button

  Uncheck show shadows under menus

  Disable shadows decline of use for the desktop icon labels

  Click on apply, Ok

  Click OK

• After the latest updates from Microsoft, my Internet Backgammon supplied with Windows 7 no longer works. It is a dead link and the game opens same. That's happened?

  I like to play trump stings on Internet and Internet Backgammon that's installed with Windows 7, Home Premium edition.  However, after the automatic updates installed yesterday, I noticed that the link to play the Internet Backgammon is no longer works.  It's just a dead link.  I can click on it, but nothing happens.  Not even an ounce of trying to open.  It's just 'died '.  I can still play trump stings on the Internet and I have no trouble to access the internet, so I wonder if this is just a small problem or do you have Microsoft remove Internet Backgammon as one of its windows games?  Note, this is Internet Backgammon that is installed on the computer, in the folder games - it is NOT the version of backgammon on MSN that you actually go to the internet and to play.  I am referring to the one in the Games folder, which is installed with Windows 7.  I play this game almost every day, so I hope that it will be restored.  I wish there was a way to contact Microsoft about this, but there isn't and they charge, then...

  Hi Kentuckywoman,

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you are facing problems with the game of Backgammon Internet. I'll be happy to help you in this problem.

  -What are the updates installed recently?

  Method 1: I suggest you to perform system restore and see if it helps.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Method 2: If the problem persists, I suggest to uninstall and reinstall the game, then check if the problem persists.

  Step 1: Uninstall the game:

  (a) go to Start and in the search type' features on or off Windows activate'.»»

  (b) click on "turn Windows features on or off". ""

  (c) develop the games, Internet games and uncheck the brand in front of Backgammon Internet.

  (d) to restart the computer.

  Step 2: Reinstall the game:

  (a) go to Start and in the search type' features on or off Windows activate'.»»

  (b) click on "turn Windows features on or off". ""

  (c) develop the games, games on the Internet andcheck the mark in front ofBackgammon Internet.

  (d) to restart the computer.

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• System randomly crashes after installing the latest update of Windows 7

  I am operating Windows 7 OS on 64-bit pc. Since the automatic updates of Windows on 01/10/13, I experience a freeze randomly the system on a range of applications. I tried other updates and basic system maintenance tasks are completed, but the problem persists. Can you help me please?

  Hi Stuart,

  I see that the computer hangs at random after installing some updates. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. which windows update has been installed recently?

  Let us try these steps and check the status.

  Method 1.

  Start the computer in safe mode with network and run a full scan of computer viruses.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

   

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  Start the computer in a clean boot state, and check the status. A clean boot to test if any element of service or third party application startup is causing this issue.

   

  How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 and Windows 8:http://support.microsoft.com/kb/929135

   

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  Method 3.

  I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Respond with more information so that we can send us your request in an appropriate manner.

• HP Envy 15 t-j100: Beats Audio does not work after the new update of Windows 10?

  My laptop set to automatically update itself with the new update of windows 10, and after checking my laptop I discovered that the bat sign was gone and uninstalled in my pc. The sound from my laptop has no depth and clarity. Is there a way I could find a driver that has the bat inside Control Panel? Thank you.

  The softpaq driver audio Intel IDT next will install the audio driver and the control panel of beats.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

• Remote connections disabled after the last update of Windows (Windows XP)

  September 14, Windows Update has installed several security updates.  After installation, my remote desktop connection ability has been disabled and I can't connect to my iPod via a USB connection.  I checked control panel and security settings, but can't find what has caused these deactivations.  Installed updates: KB2259922 KB975558 KB2347290 KB982802 KB981322 KB890830 and KB2141007 KB2121546

  No doubt...

  MS10-066: vulnerability in remote procedure call could allow remote code execution
  http://support.Microsoft.com/kb/982802

  See the section "How to get help" of http://support.microsoft.com/kb/982802

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• installed the latest updates of windows 7... now the computer does not recognize my video files avi... says "format not supported".

  I have installed the latest updates (02/27/10) and when I open sony vegas to edit some files avi... they were offline... when I tried to read with windows media player it says format not supported... before when I played these files, they would not have to synchronize audio... it never happened with my other computer with Vista... system restore solved the problem of format not supported... but so far has caused this problem? and what about the problems of synchronization? the files seem to sync when played with the hp program...

  Hi derlonewolf,
   
  Because you performed a System Restore you would not be able to determine which update problem from occurring. You will have to wait for the update to your computer to determine the update that caused the problem. The update does not necessarily cause the problem to occur again. However, you can view the history of updates to updating history.
   
  1. open the control panel (all items view), and click the Windows Update icon.
   
  2. click on the link to view update history.
   
  3. to view the details of a single Windows Update-
   
  (A) select and right-click on a Windows Update list, and then click details.
   
  (B) click on close when finished.
   
  As far as the question of timing is concerened, you can scan SFC on your computer and check if the problem persists.
  
  Steps to perform a scan SFC:
   
  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
   
  2. type the following command and press ENTER:
  sfc/scannow
  [The command sfc /scannow. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions.]
   
  A message appears indicating that "the system scan will start. Be patient, because the analysis may take some time
   
  3. If all the files require that a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue
   
  4. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
   
  5. once the scan is finished, close the command prompt window, restart the computer and check.
   
  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833
   
  You can also make manual updates instead of automatic updates and then see what are updates will be installed on the computer.

  See : http://windows.microsoft.com/en-us/windows7/Turn-automatic-updating-on-or-off

  Post back with the status

   
   
  Aziz Nadeem - Microsoft Support

• The latest Update of Firefox does not work with YouTube?

  On a few days ago, I went on YouTube to upload a video. For some reason, it gave me a message that says "request invalid. Authentication has expired.
  Not only that, if I do other things such as taste/do not love a video, or add a video to my favorites or another list of reading, it is said that the service is not available.
  I also had a problem trying to respond to the other comments in the videos. Anytime I type on my comment and click the post button, it says something like "error, try again."
  Now, when it comes to other things like just watching and looking for videos, I have no problem.

  I thought it might have something to do with the latest update of Firefox, because I tried to use YouTube with other browsers and it works perfectly well, and I was not having problems with YouTube before the update.

  No idea if the update could affect something that causes these questions?

  We have seen reports that causes the extension DownloadHelper 4.9.14 with some features on YouTube.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Monitor flashes after the last update of Windows

  I use a newer computer that already had Windows 7 pre-installed.  After the last update my monitor started flashing.  It didn't happen in Mode safe and I could not diagnose any systemic changes that can occur.  He also doesn't seem to be a problem with the refresh rate.

  I ended up coming back to a restore point from before the update.  The problem occurred after the following updates have been installed: KB2719857, KB2735855, KB2736233 and KB2741355.  Someone knows that could have caused the problem, and if so do I really need?

  All updates have been classified as '' Important '' that's why I didn't question them.

  However, it seems that my monitor was kaput.  It happened to be a coincidence that he begins to not just after a Windows update.

  I thank everyone good help.  I'll keep updating in mind suggestions, in case something strange happens in the future.

• Unable to connect after the automatic updates of Windows.

  I have two computers on my network, one with 7 and one with vista.  (US) both for automatic Windows update and yesterday, after both received updates, I couldn't go online.  Restored both and that solved.  Today it's the same thing.  I restored both and Windows updated together on manual.  Problem is I want to install updates, but you need to know what is happening.   Thank you

  Many other people have the same problem after the recent update of Win7.  A thread said that the culprit is update KB2705219 and you'll be OK if remove you it.  There is no other additional information that the user in question has done so successfully [I can't find the link, I checked both of these threads today].

  I have not tried to uninstall it I like my PC to install with a decent connection the last hours [no idea why].  I also have McAfee.

  - - - - - - - - - - - - - - -

  In addition, you should never uninstall McAfee or any other AV application unless you have a copy of the relevant utility uninstall application.  Results to omit this step can be severe and cause quite disconcerting & apparently unrelated symptoms.  I do not recommend this as a step for the problem today, but keep this link for when / if you decide to replace McAfee - McAfee Consumer products removal tool.  For other AV applications, see list of anti-malware cleaning - program uninstall tools