C90 Cisco with 7 cameras - chaining

Similar Questions

• Codec C90 Cisco with Mulitple camera

  Hello

  I'm having a problem with the secondary camera is discovered on C90 codec (v7.0.2), two of the camera is connected and HDMI1, HDMI2.

  IAM get selfview main camera only. The two camera is connected in chains and able to control.

  Is there any configuration required to activate the secondary camera of the codec to display free.

  The camera is precision 1080 12 X.

  TNX

  Bobby.

  You can change the source of the main camera using one of the following options:

  The remote control of the menu (don't remember the exact location).

  The web interface, and on the page of call control, the configuration page of the system in the video options.

  The serial port or SSH, you can issue commands directly on the codec to change the camera to help source xConfiguration Video MainVideoSource .

  Don't forget Wayne said, you can have a single camera selected at any time, therefore, you will see whatever the camera is selected as the primary source, unless you use Console TC composite multiple cameras in a single stream to display on the screen.

  https://developer.Cisco.com/site/collaboration/Telepresence/AV-Integrator/tools/TC-console/TC-console.GSP

• Console C90 - TC with 3 cam

  Hello

  Understand manual console TC where C90 can send camera source different to different remote sites to mutipoint Conference.  But I can't find the section define the source of video input to remote sites.  Can anyone share with me how this can be done?

  Thank you!

  Hi Din.

  If you have the MultiSite option key, then you will be able to handle several calls locally on your endpoint. I have not personally tested this way. But I can tell you how it works.

  If it is a question for you, I would recommend that you create a for him - TAC service request, then we can allocate more resources to solve your problem.

  From my understanding, I don't think that you can choose which photo beeing sent where and it looks like it is as expected.

  Camera 1 is standing at the top of the screen 1 (for SIP/h.323 1 calls)

  Camera 2 is standing on the top of the screen 2 (for SIP/h.323 call 2)

  Camera 3 is standing at the top of the screen 3 (for SIP/h.323 3 calls)

  If you start to change cameras, you will have no knowledge about what beeing sent camera where and so this configuration/configuration will be more complicated.  I invent it all sums in your hardware configuration in what and how you want the call to be configured.

  Thank you

  / Marius

• Overheating of Cisco SX80 double camera

  We have a SX80 Cisco codec with dual cams installed at the front of the room who the speaker / auto track feature. This room was originally installed about 1 year ago. And just recently, I started to notice some flickering with capture our video cameras in the room of the VTC. In addition, the Auto Track feature pans and zooms to an individual speaker during a video call no longer works and manual tabs on the touch screen to control the cameras are inoperable as well.

  At this 1st, it was just the flickering I noticed and I simply unplugged feeding on both cams for a little to solve this problem. However, a week later... twinkling is back, but now came the problem with the Auto Track and manual controls for each input. After power to the Assembly of the whole camera to mount on the front of the room for about 30 minutes, it seems to solve the problem. But now again once this morning the Auto track does not work and the emission of heat from the base that the cameras are on is very hot.

  I've determined that the power that feeds on the Assembly of the camera at the front of the room is separated BC from the system of room in other words, when you stop AV system of the room through the touch screen, it is always power supplied to the Assembly of the camera with a separate. What has power constantly running on the cams, making them HOT.

  Has anyone else had this problem with the Assembly Speaker SX80 track? And if yes, what is the resolution other than intermittently, turning them off the coast from time to time. I know that this device is relatively new, so wonder if the circuit design within the frame of the Assembly of the camera is shotty and needs reworking.

  Thanks in advance!

  Check out this link. It explains your problem

  https://BST.cloudapps.Cisco.com/bugsearch/bug/CSCuu06180

• How can I transfer photos from my iPod touch 6th generation for my macbook pro WITHOUT using iCloud, please? It's simple with another camera but not the case, it seems, for the Apple iPod

  How can I transfer photos from my iPod touch 6th generation for my macbook pro WITHOUT using iCloud, please? It's simple with another camera but not the case, it seems, for the iPod Touch from Apple.

  Use import option from your Mac:

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

• my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

  my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

  The Japan is by far the only country where the shutter is forced to be on

• When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

  When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

  This happens usually when the import process was not completed. If you have the original camera card - or a copy of the computer of the map - you can probably use the re-import command (on the file menu) to fix things. In addition, it is possible that the original media is imported, but this transcoding was not. If you have chosen to optimise upon import, try to select clips in the browser and transcoding to optimized.

  Russ

• With the front camera, microphone does not work, but with the camera back, it works fine. Please give me solution

  whenever I have to video chat with anyone with front camera on they won't listen to me. Even when I record with fromt camera microphone does not work with the camera back, everything works correctly and even with siri, I can't talk more but when I take a call they can hear perfectly

  Get help with microphones on your iPhone, iPad and iPod touch...

• Problem with rear camera

  Dear team,

  It comes with the rear camera on my phone (when using camera flash only):

  1. He died while taking snaps with rear camera with flash, even when the battery is charged to 100%
     • Then I have to wait a few minutes to revive or get it charged by data cable for immediate departure.
  2. on the other hand, if I don't use Flash while using the camera, it works perfectly (for example, you can click snaps as much as you want).

  Already tried troubleshooting steps:

  • I restored my Iphone 5 using itnues, for about 5-8 times, but still the problem is not resolved.

  The team can help out me.

  Looks like a hardware issue not software if you have already restored the iPhone

  If you have apple care take it to an Apple Store to get it looked at,.

  If you do not bring to the closest repair shop and tell them of the problem

• Problem with Chicony camera on Satellite A200

  Hello

  I reinstall Windows Vista on my A200 PSAE6E
  Windows SP1 update
  and installed the drivers of all the

  I have a strange problem with my cam.
  When I start with the blue led camera assistant software shines, I can see an image (the image is not clear) for 10-20 seconds and then everything is black.
  I removed the camera assistant software and install again, but its still the same
  Device Manager showing me that everything is ok with Chicony USB 2.0 Camera

  Can anyone give a suggestion that do I do?

  Thank you very much

  You must install all the Vista updates... and I mean all THE Vista out!
  Then update the webcam software and clean the operating system using the CCleaner.

• When taking picture with the light in the background with the camera back from my iPhone more than 6 s, there is a clear blue colour square (a bit like a reflection of the light) will appear.

  When taking picture with the light in the background with the camera back from my iPhone more than 6 s, there is a clear blue colour square (a bit like a reflection of the light) will appear.

  someone has an idea of what's going on?

  The blue square is the area of the camera is in point and exposure on.

  Tap on the area actually taking a picture of. For example, if you take a photo of someone int eh the room and the bottom is very light (or dark), tap on the face of the person to turn to that.

  See it-> http://iphonephotographyschool.com/how-to-use-iphones-camera-app/

• Image problems with the camera on the Satellite A200 - 14 d

  2 days ago, I bought my laptop and the image on cam doesn't seem right to me. It's a little blurry, as very many lines through it. It resembles nothing of the image from a camera with 1.3 Mp should look like. It's even better on my old cam... I tried changing the settings but nothing works.

  Anyone know what the problem with my camera? Please help me because I do not know what to do...

  Hello

  As you said, it is a 1 pixel cam. 3 MB and you should not expect too much of this cam.

  But you can change some settings to improve the quality of the image
  Check the options in the "Assistant camera".
  In the "Properties", you can define Image settings like sharpness, contrast, saturation, etc.
  The quality of the image also depends on the standard photo as jpeg folder, bmp and the size of the image.

• Elitepad: Where can I re - download the software that came with my camera?

  I have an Elitepad 900

  I just did a system restore and noticed that the flash on my camera will not work.

  I realize that I didn't like "Cyberlink YouCam" bundled software provided with my camera more.

  Where can I download these? Is there a place where I can get a disk to restore for my device?

  Thank you

  Didn't, but the software I was looking for was on the Windows store.

• Crash with Matrox camera mvBlueFox

  Hello

  I'm trying to interface with a camera mvBlueFox of Matrox.  It is a USB 2.0 camera, and the driver supports DirectShow interface which means that it should be usable with IMAQdx.  I downloaded the latest version of the Matrox driver and registered the DirectShow interface by their instructions.  The camera now presents itself as a device of NOR-IMAQdx NOR-MAX, but the problem I have is that as soon as I click on the camera in MAX, MAX crashes immediately.  Any ideas on that?

  Here is the configuration that I use:

  Windows 7 Pro 32 bit

  IMAQ 4.6.1

  IMAQdx 3.9.1

  IMAQ I/O 2.5

  MAX 5.6.0f0

  I also tried an old Windows XP computer that has earlier versions of the IMAQ and MAX installed with a similar result.  I have attached to the crash report if that helps too.

  Thank you!

  The accident is the (misnamed) 'DirectShow_acquire.ax' binary, which is an element that is the seller of the camera Matrix Vision, not Microsoft delivered.

  IMAQdx tries to query the IAMVideoProcAmp interface on the capture device and this call blocks. I think you'd have to ask Matrix Vision to debug this problem because they have symbols for their own dll and that you can see why it crashes.

  Eric

• Someone has dealt with a flashing icon of a printer or a fax machine with a camera that appears randomly in your toolbar

  Anyone dealt a flashing icon of a printer or a fax machine with a camera that appears randomly in your toolbar. This icon claims to be a mistake by microsoft and does not require my attention. However, this intefers with my programs and screen diplay icon. Anyone know how to fix this... Thank you in advance.

  Hello

  1. What is the full error message?
  2. The message mentions that there is error in Microsoft?
  3. What is the version of Windows installed on the computer?
  4. Are you referring to the toolbar or the task bar?
  5. In which toolbar you will see the icon?
  Perform a clean boot that will know if any third-party application is causing a conflict and become a reason for the question. Check out the link and follow the steps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once the diagnosis is made, follow step 7 of section to configure the computer to start the Normal start.