Console C90 - TC with 3 cam

Similar Questions

• Codec C90 Cisco with Mulitple camera

  Hello

  I'm having a problem with the secondary camera is discovered on C90 codec (v7.0.2), two of the camera is connected and HDMI1, HDMI2.

  IAM get selfview main camera only. The two camera is connected in chains and able to control.

  Is there any configuration required to activate the secondary camera of the codec to display free.

  The camera is precision 1080 12 X.

  TNX

  Bobby.

  You can change the source of the main camera using one of the following options:

  The remote control of the menu (don't remember the exact location).

  The web interface, and on the page of call control, the configuration page of the system in the video options.

  The serial port or SSH, you can issue commands directly on the codec to change the camera to help source xConfiguration Video MainVideoSource .

  Don't forget Wayne said, you can have a single camera selected at any time, therefore, you will see whatever the camera is selected as the primary source, unless you use Console TC composite multiple cameras in a single stream to display on the screen.

  https://developer.Cisco.com/site/collaboration/Telepresence/AV-Integrator/tools/TC-console/TC-console.GSP

• C90 Cisco with 7 cameras - chaining

  Hello

  We have installed a codec C90 Cisco in a large training room using 7 1080 HD Precision cameras chaining.

  You have a document on how to configure the C90 with Garland of 7 cameras guides on how to operate the cameras for example spend 1 camera to another and how to use the remote control.

  Thank you very much for the help.

  Hello

  You can use document about Garland of camera and limitation here

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/endpoint/camera/PR...

  Search for Garland

  About commissioning, whenever you want to use any camera make sure to have it as a main video for the codec, the second thing that must be supported is the remote control should be close to the camera to have adequate control.

  You must of course remote control IR response should come from desired camera, if cameras are close to each other, make sure to set the remote control DIP switch.

  Will you keep the fixed camera position or he has to move, if it is necessary to go you will rely on the remote control or any third party controller?

  Thank you

• How can I transfer photos from my iPod touch 6th generation for my macbook pro WITHOUT using iCloud, please? It's simple with another camera but not the case, it seems, for the Apple iPod

  How can I transfer photos from my iPod touch 6th generation for my macbook pro WITHOUT using iCloud, please? It's simple with another camera but not the case, it seems, for the iPod Touch from Apple.

  Use import option from your Mac:

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

• my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

  my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

  The Japan is by far the only country where the shutter is forced to be on

• When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

  When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

  This happens usually when the import process was not completed. If you have the original camera card - or a copy of the computer of the map - you can probably use the re-import command (on the file menu) to fix things. In addition, it is possible that the original media is imported, but this transcoding was not. If you have chosen to optimise upon import, try to select clips in the browser and transcoding to optimized.

  Russ

• With the front camera, microphone does not work, but with the camera back, it works fine. Please give me solution

  whenever I have to video chat with anyone with front camera on they won't listen to me. Even when I record with fromt camera microphone does not work with the camera back, everything works correctly and even with siri, I can't talk more but when I take a call they can hear perfectly

  Get help with microphones on your iPhone, iPad and iPod touch...

• Problem with rear camera

  Dear team,

  It comes with the rear camera on my phone (when using camera flash only):

  1. He died while taking snaps with rear camera with flash, even when the battery is charged to 100%
     • Then I have to wait a few minutes to revive or get it charged by data cable for immediate departure.
  2. on the other hand, if I don't use Flash while using the camera, it works perfectly (for example, you can click snaps as much as you want).

  Already tried troubleshooting steps:

  • I restored my Iphone 5 using itnues, for about 5-8 times, but still the problem is not resolved.

  The team can help out me.

  Looks like a hardware issue not software if you have already restored the iPhone

  If you have apple care take it to an Apple Store to get it looked at,.

  If you do not bring to the closest repair shop and tell them of the problem

• Problem with Chicony camera on Satellite A200

  Hello

  I reinstall Windows Vista on my A200 PSAE6E
  Windows SP1 update
  and installed the drivers of all the

  I have a strange problem with my cam.
  When I start with the blue led camera assistant software shines, I can see an image (the image is not clear) for 10-20 seconds and then everything is black.
  I removed the camera assistant software and install again, but its still the same
  Device Manager showing me that everything is ok with Chicony USB 2.0 Camera

  Can anyone give a suggestion that do I do?

  Thank you very much

  You must install all the Vista updates... and I mean all THE Vista out!
  Then update the webcam software and clean the operating system using the CCleaner.

• When taking picture with the light in the background with the camera back from my iPhone more than 6 s, there is a clear blue colour square (a bit like a reflection of the light) will appear.

  When taking picture with the light in the background with the camera back from my iPhone more than 6 s, there is a clear blue colour square (a bit like a reflection of the light) will appear.

  someone has an idea of what's going on?

  The blue square is the area of the camera is in point and exposure on.

  Tap on the area actually taking a picture of. For example, if you take a photo of someone int eh the room and the bottom is very light (or dark), tap on the face of the person to turn to that.

  See it-> http://iphonephotographyschool.com/how-to-use-iphones-camera-app/

• Image problems with the camera on the Satellite A200 - 14 d

  2 days ago, I bought my laptop and the image on cam doesn't seem right to me. It's a little blurry, as very many lines through it. It resembles nothing of the image from a camera with 1.3 Mp should look like. It's even better on my old cam... I tried changing the settings but nothing works.

  Anyone know what the problem with my camera? Please help me because I do not know what to do...

  Hello

  As you said, it is a 1 pixel cam. 3 MB and you should not expect too much of this cam.

  But you can change some settings to improve the quality of the image
  Check the options in the "Assistant camera".
  In the "Properties", you can define Image settings like sharpness, contrast, saturation, etc.
  The quality of the image also depends on the standard photo as jpeg folder, bmp and the size of the image.

• Elitepad: Where can I re - download the software that came with my camera?

  I have an Elitepad 900

  I just did a system restore and noticed that the flash on my camera will not work.

  I realize that I didn't like "Cyberlink YouCam" bundled software provided with my camera more.

  Where can I download these? Is there a place where I can get a disk to restore for my device?

  Thank you

  Didn't, but the software I was looking for was on the Windows store.

• Crash with Matrox camera mvBlueFox

  Hello

  I'm trying to interface with a camera mvBlueFox of Matrox.  It is a USB 2.0 camera, and the driver supports DirectShow interface which means that it should be usable with IMAQdx.  I downloaded the latest version of the Matrox driver and registered the DirectShow interface by their instructions.  The camera now presents itself as a device of NOR-IMAQdx NOR-MAX, but the problem I have is that as soon as I click on the camera in MAX, MAX crashes immediately.  Any ideas on that?

  Here is the configuration that I use:

  Windows 7 Pro 32 bit

  IMAQ 4.6.1

  IMAQdx 3.9.1

  IMAQ I/O 2.5

  MAX 5.6.0f0

  I also tried an old Windows XP computer that has earlier versions of the IMAQ and MAX installed with a similar result.  I have attached to the crash report if that helps too.

  Thank you!

  The accident is the (misnamed) 'DirectShow_acquire.ax' binary, which is an element that is the seller of the camera Matrix Vision, not Microsoft delivered.

  IMAQdx tries to query the IAMVideoProcAmp interface on the capture device and this call blocks. I think you'd have to ask Matrix Vision to debug this problem because they have symbols for their own dll and that you can see why it crashes.

  Eric

• Someone has dealt with a flashing icon of a printer or a fax machine with a camera that appears randomly in your toolbar

  Anyone dealt a flashing icon of a printer or a fax machine with a camera that appears randomly in your toolbar. This icon claims to be a mistake by microsoft and does not require my attention. However, this intefers with my programs and screen diplay icon. Anyone know how to fix this... Thank you in advance.

  Hello

  1. What is the full error message?
  2. The message mentions that there is error in Microsoft?
  3. What is the version of Windows installed on the computer?
  4. Are you referring to the toolbar or the task bar?
  5. In which toolbar you will see the icon?
  Perform a clean boot that will know if any third-party application is causing a conflict and become a reason for the question. Check out the link and follow the steps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once the diagnosis is made, follow step 7 of section to configure the computer to start the Normal start.

• help with photos, I took pictures with my camera and load them on my pc. ithen them engraved on a dvd .Although I can watch on my pc I can't watch on my dvd.

  I took pictures with my camera and load them on my pc. ithen them engraved on a dvd .Although I can watch on my pc I can't watch on my dvd.

  what I am doing wrong, and someone can help

  Two thoughts.

  1. not all readers of DVD load serious records

  2. don't you finalize the disc when you burned it?