CAB-E1-rj45bnc (UNBALANCED), rj45 or rj48 output?

Similar Questions

• Load Balancing does not not on 2911

  Hello people,

  I have some difficulty to operate the Load Balance on my 2911.

  I have followed the editing on this site:

  http://www.Cisco.com/en/us/Tech/tk648/tk361/technologies_configuration_example09186a0080950834.shtml

  and APARENTLY it works, but not in reality, because I see packets using a NAT IPS bot thru, but when I check on the interfaces I see we're not receive / send anything.

  Background:

  G0/0, I have one ISP, other 1/G0, G0/2 my network.

  Building configuration...

  Current configuration: 6045 bytes

  !

  ! Last configuration change to 15:47:49 UTC Tuesday, January 28, 2014 by alan

  ! NVRAM config update at 14:32:59 UTC Tuesday, January 28, 2014 by alan

  ! NVRAM config update at 14:32:59 UTC Tuesday, January 28, 2014 by alan

  version 15.1

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  encryption password service

  !

  ROUTER1 hostname

  !

  boot-start-marker

  boot-end-marker

  !

  !

  logging buffered 51200 warnings

  !

  No aaa new-model

  !

  !

  No ipv6 cef

  IP source-route

  IP cef

  !

  !

  !

  !

  dhcp LAN_DHCP_POOL IP pool

  network 192.168.0.0 255.255.0.0

  default router 192.168.2.2

  domain g_bacon

  DNS 8.8.8.8 Server 208.67.222.222

  0 8 rental

  !

  !

  no ip domain search

  IP host ROUTER1 192.168.2.2

  8.8.8.8 IP name-server

  name-server IP 208.67.222.222

  IP-server names 8.8.4.4

  IP-server names 208.67.220.220

  !

  Authenticated MultiLink bundle-name Panel

  !

  !

  Crypto pki token removal timeout default 0

  !

  Crypto pki trustpoint TP-self-signed-2101532551

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 2101532551

  revocation checking no

  rsakeypair TP-self-signed-2101532551

  !

  !

  TP-self-signed-2101532551 crypto pki certificate chain

  certificate self-signed 01

  3082022B 30820194 02020101 300 D 0609 2A 864886 F70D0101 05050030 A0030201

  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30

  69666963 32313031 35333235 6174652D 3531301E 32313137 OF 31323239 170 3131

  31335A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D

  4F532D53 5369676E 656C662D 43 65727469 66696361 74652 32 31303135 65642D

  33323535 3130819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101

  8100DEA3 06574FDF B2B2113F 84A1EF39 9969F4D9 04131994 A3FCC466 D0328CCF

  B219F1AE A3DCC204 CD993BB2 F59C9A7F C251024E 382162 5 D9277CEB F1A575A5

  0356 C 896 A7A1BB48 8EA4CFF6 DA77B72C 9904A73B 6731A6E0 3004E5EA B44C1F7F

  5667496C 1E8E603D BE9B1AA1 1065E449 F6110C17 1A5FE3B9 3593BF87 96E14DEC

  010001A 3 53305130 1 130101 FF040530 030101FF 301F0603 0F060355 87FF0203

  551 2304 18301680 14E5F8C8 C30593C3 CEAB1874 F94F070B 9674F152 AD301D06

  03551D0E 04160414 E5F8C8C3 0593C3CE AB1874F9 4F070B96 74F152AD 300 D 0609

  2A 864886 F70D0101 A 05050003 81810092 51314, 50 EA812CDA AC97A8D1 2CA06BCC

  6FD5B4A6 DA888322 E2166AB4 0CF340BB E0407C95 584A1BDF 5DC3A6EE 2862E9CF

  7BF0C831 54F06ABF 011664 D 3 75269FF3 02D434BD 0FD15F32 EB34730C 47FE29D9

  7C2BBF9D 5BDB1D4F EEBFBED5 9B07450E 83DA57B2 1F296D0A 52D39A8F 6A 679244

  05C0924C F3FA9A05 53198E BDB28409

  quit smoking

  license udi pid CISCO2911/K9 sn FTX1553AJQU

  !

  !

  username privilege 15 secret 5 alan $1$ b6Jk$ 8iz3K3cTUgSZ.VePkKl5a.

  !

  redundancy

  !

  !

  !

  !

  !

  class-map correspondence-any PROHIBIDAS

  Protocol httpwww.facebook.comhost game «»

  Protocol httpwww.youtube.comhost game «»

  match Protocol http host 'www.pornotube.com.

  Protocol http host «www.xvideos.com» game

  match Protocol http host 'www.mega.co.nz'.

  match Protocol http host 'www.radios-on-line.com.ar'.

  match Protocol http host 'www.enlaradio.com.ar'.

  Protocol http host «www.cienradios.com.ar» game

  match Protocol http host 'www.radios-argentina.com.ar'.

  match Protocol http host 'www.fmyam.com.ar'.

  Protocol http host «www.piratebay.org» game

  class-map match-all P2P

  winmx Protocol game

  gnutella Protocol game

  bittorrent Protocol game

  match Protocol kazaa2

  !

  !

  Policy-map DROP_PROHIBIDAS

  class PROHIBIDAS

  drop

  class P2P

  drop

  !

  !

  !

  !

  !

  !

  !

  !

  the Embedded-Service-Engine0/0 interface

  no ip address

  Shutdown

  !

  interface GigabitEthernet0/0

  Fibertel description

  DHCP IP address

  IP access-group acl101 in

  IP access-group out acl101

  NAT outside IP

  IP virtual-reassembly in

  automatic duplex

  automatic speed

  No cdp enable

  out of service-policy DROP_PROHIBIDAS

  !

  interface GigabitEthernet0/1

  Arnet description

  IP 186.153.125.138 255.255.255.248

  IP access-group acl101 in

  IP access-group out acl101

  NAT outside IP

  IP virtual-reassembly in

  automatic duplex

  automatic speed

  No cdp enable

  out of service-policy DROP_PROHIBIDAS

  !

  interface GigabitEthernet0/2

  IP 192.168.2.2 255.255.0.0

  IP access-group block_FB in

  IP access-group out acl101

  IP nat inside

  IP virtual-reassembly in

  IP tcp adjust-mss 1452

  automatic duplex

  automatic speed

  No cdp enable

  !

  router RIP

  version 2

  network 192.168.0.0

  !

  IP forward-Protocol ND

  !

  IP http server

  IP 8180 http port

  20 class IP http access

  IP http secure server

  IP http timeout policy slowed down 60 life 86400 request 10000

  !

  IP nat inside source map route address interface GigabitEthernet0/1 overload

  IP nat inside source map route fibertel interface GigabitEthernet0/0 overload

  IP route 0.0.0.0 0.0.0.0 track GigabitEthernet0/0 123

  IP route 0.0.0.0 0.0.0.0 200.122.102.1 254

  !

  block_FB extended IP access list

  deny ip 192.168.0.0 0.0.255.255 welcome 173.252.100.16

  deny ip 192.168.0.0 0.0.255.255 173.252.64.0 0.0.63.255

  deny ip 192.168.0.0 0.0.255.255 31.13.24.0 0.0.7.255

  deny ip 192.168.0.0 0.0.255.255 31.13.64.0 0.0.63.255

  deny ip 192.168.0.0 0.0.255.255 66.220.144.0 0.0.15.255

  deny ip 192.168.0.0 0.0.255.255 69.63.176.0 0.0.15.255

  deny ip 192.168.0.0 0.0.255.255 69.171.224.0 0.0.31.255

  deny ip 192.168.0.0 0.0.255.255 74.119.76.0 0.0.3.255

  deny ip 192.168.0.0 0.0.255.255 103.4.96.0 0.0.3.255

  deny ip 192.168.0.0 0.0.255.255 204.15.20.0 0.0.3.255

  IP 192.168.0.0 allow 0.0.255.255 everything

  allow an ip

  !

  access-list 110 permit ip 192.168.0.0 0.0.255.255 everything

  !

  !

  !

  !

  route allowed fibertel 10 map

  corresponds to the IP 110

  is the interface GigabitEthernet0/0

  !

  arnet allowed 10 route map

  corresponds to the IP 110

  is the interface GigabitEthernet0/1

  !

  !

  !

  control plan

  !

  !

  exec banner ^ C ^ C

  connection of the banner ^ C ^ C

  Banner motd ^ C ^ C

  !

  Line con 0

  local connection

  line to 0

  line 2

  no activation-character

  No exec

  preferred no transport

  transport of entry all

  transport output pad rlogin lapb - your MOP v120 udptn ssh telnet

  StopBits 1

  line vty 0 4

  access-class 23 in

  privilege level 15

  local connection

  transport input telnet ssh

  line vty 5 15

  access-class 23 in

  privilege level 15

  local connection

  transport input telnet ssh

  !

  Scheduler allocate 20000 1000

  end

  So far so good, I have check the transactions of NAT:

  ROUTER1 #show ip nat trans

  Inside global internal local outside global local outdoor Pro

  TCP 200.122.102.74:62114 192.168.0.1:62114 17.151.239.110:443 17.151.239.110:443

  TCP 200.122.102.74:62119 192.168.0.1:62119 17.172.233.134:5223 17.172.233.134:5223

  TCP 200.122.102.74:34945 192.168.0.2:34945 181.30.241.103:443 181.30.241.103:443

  TCP 200.122.102.74:37444 192.168.0.2:37444 173.194.42.230:443 173.194.42.230:443

  TCP 200.122.102.74:37695 192.168.0.2:37695 181.30.241.109:80 181.30.241.109:80

  TCP 200.122.102.74:40662 192.168.0.2:40662 173.194.74.188:5228 173.194.74.188:5228

  TCP 186.153.125.138:41426 192.168.0.2:41426 216.115.101.179:443 216.115.101.179:443

  TCP 200.122.102.74:41484 192.168.0.2:41484 216.115.101.179:443 216.115.101.179:443

  TCP 200.122.102.74:42381 192.168.0.2:42381 181.30.241.31:80 181.30.241.31:80

  TCP 186.153.125.138:42553 192.168.0.2:42553 98.136.223.39:8996 98.136.223.39:8996

  and I see they're going through the two connections.

  Buuuuuuuuuuuuut, when I check the interfaces...

  ROUTER1 #show int g0/0

  GigabitEthernet0/0 is up, line protocol is up

  Material is CN Gigabit Ethernet, the address is c464.1354.b8c0 (BIA c464.1354.b8c0

  )

  Description: Fibertel

  The Internet address is 200.122.102.74/24

  MTU 1500 bytes, BW 100000 Kbit/s, DLY 100 usec,

  reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation ARPA, loopback not set

  KeepAlive set (10 sec)

  Full-Duplex, 100 Mbps, media type is RJ45

  control output stream is XON, control of input stream is XON

  Type of the ARP: ARPA, ARP Timeout 04:00

  Last entry of 00:00:00, 00:00:00 exit, exit hang never

  Final cleaning of "show interface" counters never

  Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0

  Strategy of queues: fifo

  Output queue: 0/40 (size/max)

  5 minute input rate 774000 bps, 161 packets/s

  5 minute output rate 423000 bps, 102 packets/s

  2133521 package, 1223904205 bytes, 0 no buffer entry

  Received 615778 broadcasts (0 of IP multicasts)

  0 Runts, 0 giants, 0 shifters

  entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored

  Watchdog 0, multicast 0, break 0 comments

  1065308 packets output, 214203455 bytes, 0 underruns

  0 output errors, 0 collisions, 1 interface resets

  unknown protocol 0 drops

  0 babbles, collision end 0, 0 deferred

  1 lost carrier, 0 no carrier, interrupt the output of 0

  output buffer, the output buffers 0 permuted 0 failures

  ROUTER1 #show int g0/1

  GigabitEthernet0/1 is up, line protocol is up

  Material is CN Gigabit Ethernet, the address is c464.1354.b8c1 (BIA c464.1354.b8c1

  )

  Description: arnet

  The Internet address is 186.153.125.138/29

  MTU 1500 bytes, BW 100000 Kbit/s, DLY 100 usec,

  reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation ARPA, loopback not set

  KeepAlive set (10 sec)

  Full-Duplex, 100 Mbps, media type is RJ45

  control output stream is XON, control of input stream is XON

  Type of the ARP: ARPA, ARP Timeout 04:00

  Last entry 00:04:01, 00:00:06 exit, exit hang never

  Final cleaning of "show interface" counters never

  Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0

  Strategy of queues: fifo

  Output queue: 0/40 (size/max)

  5 minute input rate 0 bps, 0 packets/s

  5 minute output rate 0 bps, 0 packets/s

  208948 packages, 153515983 bytes, 0 no buffer entry

  Received 1236 broadcasts (0 of IP multicasts)

  0 Runts, 0 giants, 0 shifters

  entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored

  Watchdog 0, multicast 0, break 0 comments

  190283 packets output, 45657373 bytes, 0 underruns

  0 output errors, 0 collisions, 0 resets interface

  unknown protocol 0 drops

  0 babbles, collision end 0, 0 deferred

  carrier, 0 no carrier, lost 0 0 interrupt output

  output buffer, the output buffers 0 permuted 0 failures

  Everything happens through G0/0 and nothing in G0/1!

  Any ideas on why this is happening?

  Thank you in advance for your help!

  Kind regards

  Alan

  Hello

  Yes here you only have a single default route installed (one from the DHCP server) so it can't NAT on the other interface as it can route on this one.

  Change your configuration like this:

  no ip route 0.0.0.0 0.0.0.0 track GigabitEthernet0/0 123

  no ip route 0.0.0.0 0.0.0.0 200.122.102.1 254

  IP route 0.0.0.0 0.0.0.0 dhcp

  IP route 0.0.0.0 0.0.0.0 200.122.102.1 254

  Now if you want to follow the first route look at this document:

  http://www.Cisco.com/en/us/docs/iOS/dial/configuration/guide/dia_rel_stc_rtg_bckup.html#wp1065528

  Concerning

  Alain

  Remember messages useful rate.

• Random Tunnel IPSec Packet drops

  Hi experts,

  I am trying to solve a problem of fall of random package for tunneling IPSec between two VTI. For more than a month, we could not see not any question, and from today, we have 30% through a tunnel packet loss IPSec.

  After analysis, I have concluded that packet loss is located somewhere on the way to the uc520 to the 2921. Package account see the correctly on the output interface physics uc520, but the number of packets is low on the interface of penetration on the 2921.

  Pings outside of the tunnel by the way are very good.

  I also deleted the tunnels on both ends and after they have recovery, the question was always present.

  Pointers on research where packets get lost?

  RR-hq-2921 #ping 10.1.13.1 g0/1 source rep 100

  Type to abort escape sequence.

  Send 100, echoes ICMP 100 bytes to 10.1.13.1, wait time is 2 seconds:

  Packet sent with a source address of 10.1.1.1

  !!..!.!!!!!!!!!..!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  ..!!.!!!!!!!!!!!.!!!!!!!!.!!!!

  Topology:

  [uc520] == HAVE == {{{cloud}}} == MODEM == [2921]

  Test:

  Claire 2921 # counters g0/0

  Disable "show interface" counters on this interface [confirm]

  % CLEAR-5-COUNTERS: claire counter on interface GigabitEthernet0/0

  Execute on uc520: ping source timeout 0 rep 4000

  This is supposed to increase rapidly the number of packets at a distance of 4000 packages, as it has done on the output uc520 interface

  # 2921 sho int g0/0 | I entered the packages

  3348 packets input, 607812 bytes, 0 no buffer< missing="" ~650="">

  # 2921 sho int g0/0

  GigabitEthernet0/0 is up, line protocol is up

  Material is CN Gigabit Ethernet, the address is XXXXXXXX

  Description: Outdoors - WAN port

  The Internet address is XXX.XXX.XXX.XXX/YY

  MTU 1500 bytes, BW 35000 Kbit/s, 10 DLY usec,

  reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation ARPA, loopback not set

  KeepAlive set (10 sec)

  Full-Duplex, 1 Gbps, media type is RJ45

  control output stream is XON, control of input stream is XON

  Type of the ARP: ARPA, ARP Timeout 04:00

  Last entry of 00:00:00, 00:00:00 exit, exit hang never

  Final cleaning of the counters 'show interface' 00:00:42

  Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0

  Strategy of queues: fifo

  Output queue: 0/40 (size/max)

  30 second entry rate 75000 bps, 51 packets/s

  exit rate of 30 seconds 77000 bps, 52 packets/s

  3456 packets input, 619794 bytes, 0 no buffer

  Received 0 emissions (0 of IP multicasts)

  0 Runts, 0 giants, 0 shifters

  entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored

  Watchdog 0, multicast 0, break 0 comments

  3454 packets output, 632194 bytes, 0 underruns

  0 output errors, 0 collisions, 0 resets interface

  unknown protocol 0 drops

  0 babbles, collision end 0, 0 deferred

  carrier, 0 no carrier, lost 0 0 interrupt output

  output buffer, the output buffers 0 permuted 0 failures

  Good infor

  Now, did you ask your ISP if they made the last changes made?

  I think that your suspcious is correct and if the number of packets do not match, then probably something in the environment has changed, since it worked before with the same configuration and IOS versions.

  HTH.

• Media Center supports Toshiba 5.1 via the optical output?

  Hello, I have a question before you buy it...

  Media Center supports Toshiba 5.1 via the optical output?
  I find no matter where they mention only the digital output, but that might coax.

  Can anyone of you help me?

  Thank you

  Hello

  As far as I know the Toshiba Media Center supports these features:

  Dolby Digital Surround, Dolby Digital 5.1, EAX ADVANCED HD

  _Ports: _
  1 x Ethernet - RJ45
  4 x hi-speed USB - USB type A, 4-pole
  1 x audio * SPDIF out *.
  1 x audio - line stereo 3.5 mm port
  1 x headphone output stereo audio 3.5 mm port

  Big names

• RJ45 connection with BNC connector

  Hello everyone. My weight gauge has an analog output 10V, and my DAQ has the same input value. But the problem is, that the weight gauge has a RJ45 output, and my DAQ has a BNC input connector. How can I connect and the pins of the RJ45. I downloaded an image from the project...

  Thanks in advance

  Hi Orlando.

  I found your product on the Precisa website, and from there, you can download the manual.

  http://www.precisa.com/en/PR/GM/320XB/320-9410-004/index.html

  According to the manual of the RJ45 using interface RS232 (page 12), like the previous post States. On page 54, you can see the features and pinout. As you can see, your weight should receive orders remotely and to be honest that I can't find the command that returns the weight. To me, it seems that you are only able to set parameters of the weight from a remote device.

  No sense to connect a RS232 interface to an analog input. If you have a serial port on your computer, you can try to connect your weight to this port and use LabVIEW to communicate with him. This will require a "Female RJ45 DB9" - cable, which is also available for purchase from Precisa accessories, but I think it would be easier to just make one yourself for this end of the test.

  Another option for you, will be to buy the "analog output, 350-8508" - accessory Precisa (page 56). If I understand it correct, this will display a weight-based analog output voltage, but you might want to clarify that with Precisa before buying.

  I hope this helps you.

• Problems with Dell USB - C (DA200) to the HDMI, VGA, RJ45, USB3 adapter

  Hi all

  I guess I'm a little desperate at 01:45 haha...

  I just got my XPS 13 9350 and it's great. I bought the USB - C DA200 adpater USB3, RJ45, VGA, HDMI. Unfortunately, I have some difficulty with the device. They are listed below:

  (1) plug, computer does not recognize the device. If I right click and uninstall in Device Manager and do a scan 'new material', it works again - but not for long.

  (2) the device and the Realtek gigabit portion to connect and reconnect every second in Device Manager and it's annoying.

  (3) disabling the wireless card/connection really seems to help the unit to connect and it works 100%. ONLY when the wireless adapter is disconnected.

  Basically, windows is to have a real time hard keep this adapter plugged... almost as if he can't recognize it. I tried to install the drivers for the card - nothing. I've updated all the firmware from Dell crush (including the chipset) and the BIOS... nothing. Same thing. If you do a search on google, there are a few discussions on this problem. There is a nice size on Reddit.

  Someone has an idea, what happens? It's a real shame that a beautifully designed and expensive adapter does not work with a Dell computer.

  Thank you, AJ

  In another thread ("XPS 13 9350 - SSD USB C 3.1 - very unstable/not usable '-I can not add links), the following fixed my XPS 13 9550 problem using a drive HARD USB 3.0 with the Dell USB - C for HDMI/VGA/Ethernet/USB3.1 adapter:

  ... the adapter USB - C and WiFi are kind of material and power wise. If you go to the options of the advance of the WiFi adapter and change the WiFi output at 75%, this solves a lot of problems with the connection / disconnection of USB - C questions. Exit at 75% reduction does not affect your connection on wireless networks.

  My HARD drive kept connect/disconnect when you use the adapter, but this correction took care of her.

• Problems with HSRP output

  Hello dear!

  I have the following topology:

  Cisco 3845 gi0/0 - switch Foundry - fa0/0 Cisco 7206VXR

  CISCO 3845 *.

  interface GigabitEthernet0/0
  IP 192.168.80.90 255.255.255.128
  no ip proxy-arp
  IP accounting output-packets
  full duplex
  Speed 100
  media type rj45
  standby 2 ip 192.168.80.89
  standby priority 2 130
  LAN service-policy input

  CISCO 7206 *.

  interface FastEthernet0/0
  IP 192.168.80.91 255.255.255.128
  no ip proxy-arp
  Summary-address eigrp 100 IP 172.31.255.0 255.255.255.0 5
  full duplex
  Speed 100
  No cdp enable
  standby 2 ip 192.168.80.89
  standby priority 2 150
  2 standby preempt delay minimum 60
  standby 2 track Serial6/0 80
  LAN service-policy input

  This devices run HSRP, but I been out following diagnosis in two routers using 'show Eve '.

  See the day before

  Cisco 3845 *.

  FastEthernet0/0 - group 2
  The State is active
  2 state changes, last state change 5w6d
  Virtual IP address is 192.168.80.89
  Active virtual MAC address is 0000.0c07.ac02
  Local virtual MAC address is 0000.0c07.ac02 (the default value of the v1)
  Hello time 3 sec, hold time 10 sec
  Next Hello sent to 1.488 seconds
  Enabled, preemption delay dry 60 min
  Active router is local
  Standby router is unknown?
  Priority 150 (150 configured)
  Follow the State of Serial6/0 interface Up decrement 80
  The name of IP redundancy is 'hsrp-Fa0/0-2' (default)

  See the day before

  Cisco 7206VXR *.

  GigabitEthernet0/0 - group 2
  The State is Init (interface to the bottom)
  Virtual IP address is 192.168.80.89
  Active virtual MAC address is unknown
  Local virtual MAC address is 0000.0c07.ac02 (the default value of the v1)
  Hello time 3 sec, hold time 10 sec
  Pre-emption turned off
  Active router is unknown?
  Standby router is unknown?
  Priority 130 (130 configured)
  The group name is "hsrp-Gi0/0-2" (default)

  I can ping to both devices using the virtual ip address.
  The work around to solve the lines ' active router is unknown and standby router is unknown "are remove the hsrp configuration in the watch system, after the issue is resolved, but came on after a few days.
  The problem is that I have not access to the Foundry switch but I think that HSRP configuration have no problem, even in the buffer, I did not see any problem with HSRP.

  Someone have similar problem or any idea?

  Thank you more

  Hello

  I would try

  (a) using HSRP worm 2 (see http://www.cisco.com/en/US/docs/ios/ipapp/configuration/guide/ipapp_hsrp_ps6922_TSD_Products_Configuration_Guide_Chapter.html#wp1102891 )

  (b) looks a little stange me have first refusal configured on a router only.

  (c) there could be some problems with your multicasts to send/receive of Foundry switch used by HSRP?

  HTH,

  Milan

• The hypervisor, virtualizes serial RJ45 console port?

  Hello

  I'm still learning the tricks of the trade. I know that vmWare virtualizes the hardware on the host... Ethernet ports, disk, USB etc...

  What about serial RJ45 ports? How this show on the vSphere client?

  Thank you!

  Hello

  Welcome to the VMware communities.

  If you attempt to add a serial port to a virtual computer with "Change settings", you will see the options. You can:

  • Use a physical serial port
  • Use an output file
  • Use a named pipe
  • Use of the network

  Best regards, Robert

• Output sharpening in Photoshop CS5 and Adobe Camera Raw (ACR)

  Output sharpening in Photoshop CS5 and Adobe Camera Raw (ACR)

  I want to do two-pass sharpening - capture and output - with output just before printing. I do the initial sharpening (capture) in the Panel of the cab detail/sharpening, with amount slider game for example, 100.  Then, I open the PS CS5 image as a smart object and use layers and masks for more editing.

  My question is, can I go back to ACR for the final (output) sharpening pass?  When I re - open the file in ACR, the sharpening amount slider is zero, but the other three sliders are still at the settings I used at the beginning of the process, i.e., capture sharpening.  If I still once set the amount slider to a positive value, and then open the image in PS for printing, will be my second pass through the ACR sharpening Panel take effect - it will accumulate on top of the initial sharpening?

  Moreover, the reason why I want to give sharpening in ACR, rather than, say, PS Unsharp Mask, is if I can use the masking slider in ACR, which is much easier than the comparable techniques available in PS.  I am aware that some people say that you shouldn't perform any masking for output sharpening. I would, however.

  Thanks for the ideas.

  3D eyes wrote:

  My question is, can I go back to ACR for the final (output) sharpening pass?

  Not sure about the amount reset... I think that something is happening out there. But to answer your question, the details of Camera Raw Panel is designed to be a capture sharpening and not designed to be output sharpening. Controls are really designed to regain lost sharpness turning light pixels with an optical system only.

  He got out there available sharpening in Camera Raw, but only in the workflow Options button. Click on that and you will see the options. Yes, they apply the good output sharpening, but be careful he applies what he you this smart object... no other layers above or below this layer.

• Update of the "couldn't find any output device" after the Sierra

  I've updated my iMac (model 14.2) of OS X El Capitan with macOS Sierra yesterday. The update went smoothly except that once the complete update, the Office and I logged the volume in the menu bar icon is grayed out. I immediately opened settings, assuming that the update had deselected somehow my default audio output device (a pair of external speakers, in this case). But when I went on the audio menu, I was surprised to see "not found any output device.

  I have looked around a bit and have not yet found anyone else with this problem. I became so desperate to get my audio that I even tried installing 3rd party 'Voodoo' audio driver, but it gave me the option for "Digital out (HDMI)" which is of no use to me, I have the mac connected to a TV via a VGA adapter and it does not have a HDMI adapter. One thing it stated however is that somehow during my got deleted and never replaced Applehda driver upgrade, or install a driver on 3rd wouldn't have added of output devices to list (albeit dimmed those outside and totally dysfunctional). So at this point, that I am at a loss, I know not how to replace the driver, where or how I would install it so any help is greatly appreciated. Danke!

  Hi Alison E.C..

  Thanks for the upgrade to Mac OS Sierra! I see that you have lost your audio output device once you upgrade. No worries. Great way to try to get your audio works using another audio driver. Given that this has not solved the problem, please try to reset the NVRAM.
  

  What is NVRAM?

  A small amount of memory on your computer called "non-volatile random - access memory" or NVRAM, stores certain settings in a location that OS X can access quickly. Settings that are stored in NVRAM are dependent on the type of Mac you use and the types of devices on it.
  Information stored in the NVRAM may include:
  The speaker volume
  Screen resolution
  Selection of boot drive
  These latest panic the kernel, if applicable
  If you encounter problems with these features, you may need to reset the NVRAM on your computer. For example, if your Mac starts up from a bootdisk other than that specified in startup disk preferences, or a question mark icon appears briefly at the start of your Mac.

  How to reset the NVRAM on your Mac.

  This should have your internal audio device showing as it should be under your settings in the system preferences. Please use the Apple Support communities to post your question.

  Have a great day.

• Connecting apple tv to the output of the HARD drive?

  Can someone help me with the apple tv connection to my TV? My TV has only hdmi output which I already use for a satellite dish. The only other available exit is the HARD drive, but I only have a hdmi cable to hdmi. Is there such a thing as hard drive hdmi cable to? any help would be appreciated.

  I guess it's a usb port on your tv labled as a hard drive. If that's true, you can get a cable hdmi to usb - if there is such an animal.

  Good day.

• tvOS 10 update breaks DD5.1 on Apple TV output 4 HDMI

  Then, I upgraded tvOS 10 last night. Now, all the movies content on Netflix or iTunes won't play with audio when I output 5.1.

  I have my TV connected to a HDMI/optical splitter so that it can feed my Sonos Playbar. Prior to the update of the audio has been correctly be pulled the HDMI cable and divided optics 5.1 true, as stated in my application of parameters of Sonos. Since the update, I have to stereo to get all the sounds, which is so obviously not true 5.1.

  Someone else had this problem? Any ideas on a solution?

  Thank you.

  Try the Bike ATV power and sound systems. It is working for me with HDMI to TV and optical out to A / V receiver. It has no reason for the software of the ATV to make it different than before.

• You can assign output by ascending path to an existing project in the logic?

  Hi all

  Never really need to do until today

  Got a logic project (others 50 titles) I need to assign the output increasing outputs audio.

  Its the (only) thing that ProTools can do quite easily (cmd & option)...

  Is it possible to do in logic?

  Thanks in advance,

  Dan

  As I do this is to highlight all the tracks in the console window and then click on choose the output on the first track while holding the Option key.

• Output of Simulator is not appropriate in an external display for Swift

  Hello

  I am a first time Mac user. Bought a Mac Mini to learn the Swift program.

  Version of the OS - OS X

  Version of Xcode - 7.3

  How to set the Simulator to show the correct output? After placing a button and the execution of the code, the button is placed in various different places for iphone versions.

  Ask this question in the Forum of developers for Swift: https://forums.developer.apple.com/welcome

  Xcode-click and highlight the fast focus groups. If you are asked a developer user name and password, it is your identifier Apple and your password.

  Good day.

• Vocals and guitars/keys using multiple output

  Hello

  I intend to play a CONCERT with MainStage 3 this weekend, and I'm trying to find a way to make it work. I sing and play on the keys or on guitars. I add a few effects on channel strips in the. I know I could put just outputs of the channels output material, but this will not cause me not to hear anything.

  If question 1.
  Is it possible to send a string to two independent outputs? for example 1-2 (as my monitor) output and 3-4 for the console?

  If not, question 2
  The other way, I'd do is just send it to THE then set out ancillary differently. Then the question would be - how to send it to the pre fader? So change me the volume will not affect what I'm doing on front

  If you like my so that you got through questions, there is another question asking why my voice sounds like the choir in my ears (as if there are two entrances with a latency, when there is one) I posted it yesterday, but nobody answered yet

  Hello

  "I know I could put just outputs of the channels output material, but this will not cause me not to hear anything."

  Why you say that? Who should produce sound...

  But let´s okay focus on your question.

  Use option 2 - create a channel at concert level and name such as keyboard and output than your 1/2 material on and do as well send you want.

  To choose the post pan, fader pre or post fader, just wait click in the shipment, and the options displayed.

  

  Hope this has helped you.