Still WINDOWS INSTALL

Similar Questions

• Unrecognized works drivers and windows install on and on

  Dear Toshiba

  I need some advice and help on some problems with my laptop Toshiba Satellite L550D windows 7 (updated with windows 7 I have purchesed on your part).

  I searched on several Forums (forum of toshiba responses, Microsoft MSDN Web site), but I still have a few problems, and I do not hesitate to ask for help in this way.

  Question 1: My laptop does not recognize some drivers, and it happens as follows: I check in the Device Manager, device system, ATI i/o communications processor smbus controller, shows message: "no drivers are installed for this device. When I chek 'pilot' message: ' no file necessary drivers or embarked for this device.

  When I tried to update driver, there is automatically a message that this driver is up to date and in 'Browse my computer for driver software' we goes to the location of the driver file, and then select the driver to install, the installation of the driver, then "windows has successfully updated the driver software", has finished installing the driver for the software (see above the IO... ATI).

  After that, I downloaded all the drivers available from the Toshiba site yesterday for my OS and my product and the situation is the same, it shows NO file necessary drivers or have been loaded for this device.

  The same situation is with other equipment, as follows: timer event 2) precision, 3) numeric data processor, controller 4) programmable interrput, 5) speakers, 1 memory access controller) direct, clock system 6).

  Question 2: There is also another problem, that some downloaded drivers can be installed, as follows:

  (a) software modem of toshiba 2.2.97 (SM 2297ALDO4), message: you want to allow this program to make changes... ? I click 'Yes', but nothing happens.

  (b) parts of modem select Driver utility, it appears the message "cannot find the support device.

  (c) Mobility Center tiles pilot and driver DVD player, touch pad driver synaptics, for only three drivers there is no Install Shield Wizard on the screen, and installation does not start.

  (4) Toshiba vallue added package 1.2.25, message shows, 'Try to prepare InstallShield wizard', then 'another version of this product is already installed, installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove programs from the control panel. {FEDD27A0-B306-45EF-BF58-B527406B42C8}.

  I tried to uninstall Toshiba value added package, but it shows that Error 1612 the installation source for this product is not available. Verify that the source exists and that you can access.

  I also noticed that the existing version on my laptop is 1.2.28 (of the 06.01.2010) and this downloaded version (that cannot be installed) is 1.1.1.4.

  Question No. 3: above all that, every time I have start or restart Windows 7, it displays the message 'windows install installation preparation', short-term, then disappears, (I collapsed, then activated and restarted Windows install) and the error is not resolved.

  How to remedy?

  Thank you

  I have after reading your long post m really to wonder: what do you do?
  DERA Jelena I installed Win7 Toshiba upgrades and clean install Win7 on more than 10 different Toshiba notebooks and didn t have a problem except the feature FN keys on an old Satellite A200.

  Anyway, when you upgrade pre-installed Vista notebook with original Toshiba upgrade kit you need to just follow the instructions you have with her. Instead of the first composite (drivers) drive and it will be your system and you inform that drivers must be removed from the system before the start of the Win7 update. When the drivers and some tools from Toshiba is deleted, you must use second upgrade for Win7 upgrade disk.
  After doing this put the first disk again and check for the installation of compatible drivers.

  That is so easy to do and I don't really understand what is happening with your laptop. After reading your ad I think you've done the installation of own OS and not an upgrade. What did you do exactly? I mean after upgrade cannot be so conflicts of hardware in Device Manager.

• 1206tx envy 6: Windows install hard drive problem

  I currently install windows 8.1 and in my cell there are two ssd 30 GB drive hard one and only one 500 sata.
  I can't install on sata as it says it's style gpt and I tried to delete and now it is not allocated and is not awarded. On the ssd, it was in error, and I read a forum saying that removing the drive sata hard and get on ssd. I did and I did but after connecting the hard drive it is said that there are no windows installed.

  Hi there @Abdull,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I watched the Style GPT error and the error No Windows installed.

  The laptop you have comes with SATA 500, but you also have a 30 GB SSD. Does do that? The SSD is external, or put in the machine yourself?

  I would say performing a HP System Recovery to reinstall the operating system, assuming that the partition is still intact. If this is not present, you did a set of recovery media?

  Please follow these troubleshooting steps, re-post and let me know how everything went.

  Thank you!

  Have a great day!

• Windows Vista Service Pack 2 causes the message "Windows install will not be accessible".

  I am running Windows Vista with all the updates installed but Service Pack 2. I uninstalled Service Pack 2 because it was causing problems with the windows installation service. I was unable to install microsoft office update because the windows installer could not be accessed, and Adobe Acrobat Reader could not be repaired or updated for the same reason.

  With installed Service Pack 2, I traveled all troubleshooting for the windows service install. I have a click with the right button on my computer, manage, service and open the properties of windows install. I have activated the service, but still couldn't install the updates Microsoft office or Adobe Acrobat Reader update/repair. I also tried to configure windows install automatic rather than manual when the computer starts.

  I had the problem "Windows install is not be available" for nearly a year. After trying to do a repair Vista boot without result, I uninstalled all updates. The problem disappeared. I decided to install the updates one by one. After you have installed Service Pack 2, the problem with windows install returned. The Service Pack installs completely and then open my computer properties indicates that Vista runs with Service Pack 2 installed.

  Uninstall Service Pack 2 and blocking automatic updates will not install it was my only solution to the issue of "Windows install is not be accessible". I fear that it may cause a security flaw in my computer, however.

  If someone has encountered this problem, and if so, is there a solution to install Service Pack 2 for my windows service install still works correctly?

  Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves. Composition of such problems, Geek Squad is also infamous for having failed to download/run the Norton removal tool before installing another AV app or security suite! The 'leftovers' Norton may have caused your post-SP2 installation problem.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  5. restart & test (i.e. display SP2 & install it again). [2]

  TIP: Temporarily disable Sunbelt Vipre Antivirus before installing SP2. If you still encounter problems after installing SP2 again, open a free support by my previous response incident.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  [2] How to hide or show an update of Windows Vista

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows install and WUDRIVER modules. DLL

  My installer of Modules of Windows does not work so I tried to re - register the windows update dlls.
  I did high cmd:

  net stop WuAuServ
  The Windows Update service stop
  The Windows Update service stopped

  REGSVR32 WUAPI. DLL
  REGSVR32 WUAUENG. DLL
  REGSVR32 WUCLTUX. DLL
  REGSVR32 WUDRIVER. DLL
  REGSVR32 STINKS. DLL
  REGSVR32 WUPS2. DLL
  REGSVR32 WUWEBV. DLL
  REGSVR32 ATL. DLL

  net start WuAuServ
  The service start Windows Update
  The Windows Update service has started

  However, there is an error:

  "The 'c:\windows\system32\wudriver.dll' module was loaded, but the DllRegisterServer entry point was not found.

  Make sure that "c:\windows\system32\wudriver.dll" is a valid DLL or OCX file and then try again. »

  After a reboot Windows install Modules still do not work.
  Is there a way to fix this? Should I replace the c:\windows\system32\wudriver.dll file?

  -alfred

  Why did you start another thread about your problem? See http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6bad90e6-e311-4d9d-af8c-c56a615731b8 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Programs such as Adobe installation problem, error: windows install is not properly installed.

  Original title: problems with Windows Installer.

  When you download a software such as adobe reader, I get the message that windows install is not installed correctly, I tried fix various programs and changed the status of windows in automatic setup, but still does not.

  Recently, I reloaded Windows XP after having a virus.

  Hello

  Thanks for sharing the information.

  Glad to know that the problem has been resolved. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• If I had to format a hard drive, it will delete everythink including windows xp disk if yes I would be able to see all thinking when I turn on my computer, as if that were to happen I could use windows install for install windows xp

  If I had to format a hard drive, it will delete everythink including windows xp disk if yes I would be able to see all thinking when I turn on my computer, as if that were to happen I could use windows install for install windows xp

  Gaara_2k6,
  Welcome to the responses of the Forums.  The short answer to your questions are Yes and no and no.

  Depends on how you format the drive, it will delete everything on the drive.  Now, it may still be recoverable with a software specialist or moving to a data recovery company.

  If you formatted your hard drive you would not be able to start to do anything, because there would be nothing on the startup disk.  With the Windows XP CD or with the recovery media provided by the manufacturer of the PC is the only way to reinstall Windows. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Where is utility windows install cleanup located?

  original title: utility windows install cleanup

  I can't find Installer Cleanup utility anywhere. Is is still available and if so where?

  Automated convenience store is available who can diagnose problems that may prevent install and uninstall programs on your Windows computer. This troubleshooting can help with programs that do not uninstall properly and issues where programs can block the facilities of other programs. To run this utility, click run now on the following Web site:

  Convenience store program Install and Uninstall

  Note: Windows Installer Cleanup (MSICUU2.exe) utility which has been previously referred to in this section has been removed. The installer and uninstaller convenience store is a replacement for this utility.

  If you uninstall Office version 2003, 2007 or 2010, a new FixIT solution is available in the following Microsoft Knowledge Base article:

  How to uninstall the suites Office 2003, Office 2007 or Office 2010 so I can't uninstall it from Control Panel?

  If you need to uninstall Microsoft Security Essentials, see the following article in the Microsoft Knowledge Base:

  How to manually uninstall Microsoft Security Essentials 2.0.1963 if you cannot uninstall it using Add / Remove programs

  Hope this helps

  Bobby

• If installation Adobe Acrobat DC Windows install does not update of managed advertised products. At least one characteristic of the product must be installed before applying the update.

  If installation Adobe Acrobat DC Windows install does not update of managed advertised products. At least one characteristic of the product must be installed before applying the update.

  Contact adobe support by clicking on this link then "still need help" as soon as it appears, http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Somewhere is the sum of control or digital sign for firefox windows install?

  Hello
  Somewhere is the sum of control or digital sign for firefox windows install?

  Latest version of Firefox on the CDN server:

  • http://download.CDN.Mozilla.NET/pub/mozilla.org/Firefox/releases/latest/
  • [1020249/questions/1020249] How to use the SHA512SUMS. CSA

• Clean windows installed, can not synchronize

  I just clean windows installed (from 10 to 8 1). Then, I downloaded firefox, signed and sync, but nothing happened.
  I'm sure that's not old sync (firefox says that my version is up-to-date)

  Pure install FF from the given site:
  https://www.Mozilla.org/en-us/Firefox/new/

  and for ALL the query related sync, please visit:
  https://support.Mozilla.org/en-us/products/Firefox/sync

• Boot camp do not restart in Windows install

  Hello. I'm trying to install Windows 10 on my early 2015, 13 "Macbook Pro, El Capitan. Wizard boot camp through partitioning and rebooted, but it restarts in OS X and not in the installer of Windows. The ISO was downloaded directly from the Windows website without problem (Win10_1511_2_EnglishInternational_x64, 4, 46 GB of files). When holding down the option key when starting key only the Macintosh HD does, no view of the BOOTCAMP partition even if it is visible under storage.

  My Macbook is the most expensive thing I own so I would avoid the bricking of her if possible, I would be grateful if someone could guide me through this. I desperately need Windows installed so everything just do not solve this is not an option. I've attached a screenshot of the partition under storage, although I don't know if that would be any help.

  

  See the disk utility:

  

• I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?

  I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?

  Hello grandpa_bill,

  Thank you for your participation in the communities of Support from Apple.

  If you get an error when you install an update to iCloud for Windows, try to download the latest version of download iCloud for Windows.

  For more information, see get help using iCloud for Windows.

  All the best.

• El Capitan 10 BootCamp Windows does not restart in windows install

  MacBook pro (mid-2015) 15 "i7 2.5 16 GB of ram running OS X El Capitan 10.11.4

  After installing windows (download from Microsoft) 10 per boot camp, he didn't restart windows install, just run OS X, BOOTCAMP partition exists, but it's just blank, even trying to hold 'control' even if there is no drive restart it to another macintosh

  and here's the output for "diskutil list" Terminal and "diskutil list sc.

  Perform the following two procedures and restart your Windows installation.

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support