Cabo rede desconectado Huawei mobile adapter. connect para o than FACO?

Similar Questions

• Huawei mobile adapter unplugged network cable. How to connect

  Huawei mobile adapter unplugged network cable. How to connect?

  You can just X that out or let it go on its own, doesn't mean that you are not yet connected.

  You press Connect on the popup of the Application.

• 5901tw flow 8: [Please help] unable to connect to 4G network card, driver missing HUAWEI Mobile Broadband Module

  Hi all

  I just bought 8 streams HP 5901tw 4 days ago, yesterday, after internet connection using my card of 4G (WWAN driver) in my Tablet 8 Stream, suddenly the internet connection dropped and I lost my 4 G network card. I don't know why it happens by itself. But for connection Wifi still works well and wifi interface is always detected in network adapter but 4G is missing from the list.

  In Device Manager I see list of pilot missing in other devices-> HUAWEI Broadband Driver Module is missing from my Windows with Bing 32 bit OS 8.1. I try to find the driver through windows update, website of hp or other sources, but is not found. I also tried to update the BIOS firmware to the latest version and upgrade of such software firmware driver LAN, etc. from the HP Web site, but still can not fix missing pilot of the HUAWEI Module of high speed.

  I also try reboot several times, making recovery, but still having lack of driver for HUAWEI ADSL Module.

  Last effort, I try to current level Windows 8.1 to Windows 10, but still no conclusion success lack driver HUAWEI or fixing my 4G network missing question.

  Now I can still connect to the internet with my 4 G card more every trip.

  Someone there solution and how is address/where to download those missing 4 G network driver (HUAWEI ADSL Module) 8.1 for Windows or Windows 10 HP 5901tw 8 streaming?

  Really appreciate for any help and answer including HP support.

  It's really annoying to have this problem and get stuck without a solution. I just enjoy this new Tablet HP for 2 days and now unable to connect to the 4G network more.

  Thank you.

  Kind regards

  Wachyu

  I finally found the problem with the HUAWEI ADSL Module in my stream 8 HP (after 2 days of sleep trying to install and uninstall the driver and try all options).

  It seems maybe some Windows Update or a driver is trying to change the firmware inside the card top debit MOBILE HUAWEI to download mode (VID:12 d 1 PID:1568), so it can't use any driver installed in point 8.1 of Windows.

  I tried to manually change the download mode inside the HUAWEI tools firmware: Revskills (B. Kerler credit) return to the standard mode and then reset, then the Device Manager will detect again under the new material in NIC as HUAWEI Mobile Broadband Module (VID:12 d 1 PID:1570) and automatically installed its driver from Microsoft.

  VOILLAA, My Mobile Broadband can now be re-used to connect to Internet and now also presented in the connection.

  A lot of delicate here to force Windows using HUAWEI driver to use the COM Port to communicate with the card mobile broadband HUAWEI inside and then using Revskills tools to change the mode to return to standard mode.

  If someone knows this problem and wants my help, just ping me and I'll be happy to help you in the orientation.

• Huawei Mobile Connect - 3G modem failed to install Windows 7 on USB 3 port.

  Huawei Mobile Connect - 3G modem failed to install Windows 7 on USB 3 port. I looked for the answers here and I can not find my problem even for questions answered with Dibcom TV Tunder device since I can't find this device in my laptop. He is able to install and operate in another laptop running Windows XP. Been tried to uninstall and reinstall more than 5 times and he continues to meet with even has no message and I even downloaded the latest drivers from the local Web of ISP site. Helpdesk of mcafee and contacted microsoft, but they are not able to solve my problem.

  Thank you.

  Managed to solve by referring to the answer below posted by Rudolph_DT asked on thread

  Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  Thank you.

• Airtel 4 G (Huawei Mobile Wifi) Hotspot is not showing network on EL captain

  Hello

  I just bought an Airtel 4 G model Hotspot(Huawei Mobile Wifi) E 5573. There are 2 ways to connect this model to my macbook pro which is running on EL CAPTAIN 10.11.2

  1. I can connect this modem wifi with the supplied USB cable. In this case the internet arrives on mac and it works well

  2. Another way is to use this modem as a WIFI router. Now for some reason any my laptop does not show this network in the wifi networks list. The network showed on all my other devices such as Iphone, Android, iPhone and Windows pc but not on mac. Surprisingly, it shows on my friends mac but not on mine.

  Can help understand what can be done so that I can see this network appears in the list of networks.

  Thank you

  Pawan

  Change channel 6 auto. He began working

• My Sprint HTC Android mobile phone connects with the supplied USB cable, but the computer says 'No HTC Device Connected'

  My Sprint HTC Android mobile phone connects with the USB cable, but the computer says 'No. HTC Device Connected' so I can't sync...

  Hello

  1. do you have HTC Manager installed on the computer?

  2. have you tried it with different USB ports?

  You need the HTC Sync HTC phone Manager software.

  Method 1: Try again with different USB ports and see if that helps.

   

  Method 2: If HTC Sync is installed, if you get the message "no device connected" in HTC Sync, ensure that your phone USB setting is changed to "Charge Only" to "HTC Sync".

  If the methods above do not help, you can contact HTC for additional help.

  Here is the link: http://www.htc.com/us/support/

• ADF Mobile: Specified connection URL is not accessible.

  Good afternoon

  I have studied this error and you know it is recommended to adjust the PROXY settings.  However, I have no proxy in place.  Here's how I got here where I am:

  Last week I upgraded my MAC (OS x 10.9) JDK 1.7_55 and JDev 11.1.2.4.39.64.36.1. I use now a mistake at some point in the development process that makes no sense - in the initial phase.

  I tested my URL on Safari, Chrome & the customer REMAINS.  It works as expected.  So there is nothing wrong with the side server.

  
  

  Surprisingly, when I plug the URL in JDeveloper under the adfmf - application.xml-> Security-> authenticate & access control I get the error "specified Login URL is not accessible.

  
  

  My colleagues can do the same thing with a response of 'Success'

  
  

  I am able to deduce that I have a problem of JDeveloper.  Please provide some instructions on how to solve this problem.

  -Thanks ~ Theresa 'Tree' Strepek

  See similar position.

  ADF mobile url connection

• When Windows 7 SP1 tries to connect to more than 300 printers on a print server, printers, and devices hangs.

  Original title: device and printer crashes

  Running Windows 7 SP1 tries to connect to more than 300 printers on a remote print server and printer hangs and nothing is displayed.  If the connection to 200 or less, no problem.  Is there a difficult cut offshore for how printers windows 7 can connect to

  Hello

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 Hardware Compatibility TechNet Forums

• I have 2 accounts of adobe Setup and want to merge to 1. My Behance site is a different connection/e-mail than my creative cloud. So... When I'm connected to CC, I can't see my Behance site and updated. Can you please help?

  I have 2 accounts of adobe Setup and want to merge to 1. My Behance site is a different connection/e-mail than my creative cloud. So... When I'm connected to CC, I can't see my Behance site and updated. Can you please help?

  Please contact our support staff from the following link for assistance on this subject: https://helpx.adobe.com/contact.html

  (be sure to connect to adobe.com with your Adobe ID first)

• Huawei Mobile Connect Modem 3 G installation problem

  Hi, I use Windows Vista Home Premium SP2 on a laptop Dell Inspiron 1520, with all the updates on the system and updated regularly. Last week, I bought a unit of USB stick from a vendor (Meteor, Ireland) to connect to the internet using this stick. I followed the instructions; inserted the stick, waited a few minutes for the program Autorun start, but he has never started. Then I went to "my computer" to start the installer manually, I saw 2 new readers, F and G, and when I clicked on each, they simply disappeared one by one. As the new disks disappeared, I couldn't go in the folders and look for installers.

  Then I went to windows update to check if there is no updated driver for this device, and it showed me "Dibcom 9080-device of TV Tuner" update. I tried to install, but the insatallation to no avail. I tried again, showed another installation failure warning message.

  Then, I went into Device Manager, given the attention yellow icons next to "USB Mass Storage Device" and "Dibcom TV Tuner device," I uninstalled, restarted the computer and tried to install the device again. When I inserted the device into the USB port, box "new hardware installation" appeared and I waited for about half an hour, which is too I think. The installation dialog box said "Search drivers pre-configured", which I suppose that my system was not looking into the USB device for pilots, but for the system windows itself and spending far too much time.

  The result was failure, even though the dialog box says "your device is ready to use", I was not able to enter the unit and the installation of the Mobile Internet software, namely "Broadband to Go." Device Manager showed a yellow warning next to 'Device of TV Tuner Dibcom' message, "USB Mass Storage Device" and there are 2 products "USB Mass Storage Device" under the USB in the Device Manager section.

  This device has been installed and works perfectly on my laptop which runs on Windows XP Professional, I am writing this message from. On the Device Manager, under dfferent sections I see Huawei on items, such as hard drives, CD-ROM/DVD-ROM drives, Modems, Ports, and USB controllers.

  My theory is; Vista is the thought that the device's Tuner TV Dibcom, trying to load these fake drivers and is in conflict with the device itself.  Even if I am able to seize the records of the device and install the software, whenever I stick, Vista will run the stick as a TV Tuner device and which would create a conflict. Based on this theory, I went to follow in the registry and searched for anything that is named "dibcom" and '9080' and I deleted everything in the registry, but it does no more, whenever I plug the stick into the laptop, Tuner TV Dibcom pilots successfully load (!) and I am unable to use this device to connect to the internet.

  I hope I gave enough information for troubleshooting. Please let me know if you need more information.

  Thank you

  btaspinar

  Hello btaspinar, welcome.

  I would suggest trying the following:

  REMOVE THE DEVICE FROM DEVICE MANAGER DRIVER

  1. open Device Manager
  2. right click the Dibcom TV Tunder device and select 'properties '.
  3. click on the tab "Driver" at the top
  4. click on the "Uninstall" button
  5. check the option 'Remove the Driver' and cofirm uninstall it, then...

  CHANGE THE SETTINGS FOR AUTOMATIC DRIVER INSTALLATION

  1. click on START
  2. right click "Computer" and select "Properties".
  3. click on "Advanced system settings" on the top left side
  4. click on the tab "hardware".
  5. click on "Windows Update driver settings.
  6. choose "ask me every time...". ' setting, click 'OK', click 'Apply', click 'OK' and restart your computer and try reinstalling the device.

  Let us know if it works,

  Thank you!

• Huawei mobile connect-Device Enumerate Bus error

  Dear Sir.

  I cannot connect dongle for laptop, as shown in Device Manager alet and cannot instrall on drivers also. Pls help to slove this problem.

  

  my laptop product number-B3K23PA #ABG

  Hardware ID

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C & REV_01
  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C
  PCI\VEN_14E4 & DEV_4727 & CC_028000
  PCI\VEN_14E4 & DEV_4727 & CC_0280

  Thank you

  ERVs.

  Hello

  Your images have been approved so I still don't see them. Admin & Moderators have to watch all images first before approval to avoid the display of the images that are inappropriate on this forum people.

  Kind regards.

• Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.

  Thanx

  Hi rui2010,

   

  Place your machine in a clean boot State to see if another application is in conflict with the modem.

  If this fails, I recommend you reach out to the community Hauwei for assistance:

  http://Forum.Huawei.com/jive4/Forum.jspa?forumid=46&orderStr=9

   

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Mobile broadband - connection limited

  Hi all

  I use a Tablet 2 with an Ericsson 5621 gw adapter and a Vodafone Egypt USB SIM card (which works fine in my Sony Ericsson Xperia arc phone including creation of hotspot & using internet etc.).

  Now, I can connect to the Vodafone Mobile Braodband, but always only with a limited connection (no), the driver is new, the unit works fine, no probs, same connections complete shows and stable access connection to Vodafone, only the network in windows 8 32-bit dialog box indicates limited access, and it is, says the Device Manager.

  The thing is it worked fine for a while, the only thing I changed since then was to try if the hotspot feature worked (which is not, and how boring is that), so I disabled the hotspot, and since then, the mobile broadband network is limited.

  I also checked my normal Vodafone SIM card (which has also a data volume of 5 GB or more and also works well in my Xperia arc incl. internet and hotspot), with same result, ditto my SIM Lenovo Mobile Access.

  where is this option to restart? must be somewhere... Please?

  BR

  Klingsor

  OK, now here is the solution:

  After many trials, I uninstalled the network broadcom adapter, re-installed with pilot (to date), and connectivity was back to full.

• Chromebook C720 - no mobile internet connection with my usb dongle - even not recognized.

  Hello

  Your help please. I use an Acer C720 Chromebook bought in England but I am now at the Brazil and I can't access my mobile data plan - the operator is TIM and the dongle is Olivetti, Olicard 160. I can access the WiFi from the nearby square, but this means I have to perch on the edge of 3 inches from my room window, is not comfortable. I have an Acer Aspire One D255 with me as a return to the top (good job, I) and it uses the same USB dongle without any problems - but in 3 years much more slow and clumsy as the chromebbok for inernet - but it works. Back to my problem, why when I plug the USB to TIM with SIM in my Chromebook C720, is it not recognised? All opinions more welcome, because I'd use this Chromebook sitting at my table, if possible to the Brazil! Thank you very much, Baldocci - a semi luddite.

  Not a lot of support for this kind of material in Chromebooks. I've heard more support cell adapter is coming, but I've heard that for a while. Many even dongles are not working with Mac so your best option is a personal mobile device, MyFi. In this way, you can connect your Chromebook through the WiFi of this adapter part.

• vmrun to change the settings of the VM host network adapter connection

  Hello!

  I have a vCenter computer vSphere virtual running Windows 2008 R2 that hosts multiple virtual machines of different operating systems on several different network VLAN (100, 200, 300, etc.). I would like to be able to run a command from a guest VM running Red Hat Enterprise Linux 6.5 say vCenter to change the settings of a network adapter VLAN to another and vice versa. I did a lot of studying, but I could not find a way to do it. The closest thing I found what I'm looking for are the commands below, but they do not work.

  vmrun t CR h 192.168.0.3 - P443 - gu < guestusername > - < guestpassword > gp readVariable "[name of the data store] RHEL 6.5/RHEL 6.5.vmx ' runtimeConfig ethernet0.vnet/dev/vmnet0

  vmrun t CR h 192.168.0.3 - P443 - gu < guestusername > - gp < guestpassword > writeVariable ' [name of the data store] RHEL 6.5/RHEL 6.5.vmx ' runtimeConfig ethernet0.vnet/dev/vmnet1

  ReadVariable command seems to run, but produces 0 bytes of data, and the writeVariable command gives an error message indicating that the operation is not supported. Vmrun can perform a switch between the virtual computer network connections or do I need to use a different approach? The reason that I need to have a command to run instead of just go into the configuration of the VM guest in vCenter and selecting only the network personalized the menu drop-down is so that development and the test team can run a script will instead given administrator privileges.

  vmrun (and VIX) won't let you do what you're trying to do.  Nothing don't pay attention to these variables being changed.  You will need to use an API that reconfigures the virtual machine networks, which probably means writing code using an API of vSphere.