caching of server log entry
Can someone please explain the difference between "stored on the Internet" and "imported"?
I have activated additional recording and it says:
"Since the beginning of server: 1.61 TB returned to clients, 165,28 GB stored from the Internet, 0 bytes from peers, 116.3 MB abandoned; GB any 43.93. »
My best guess is maybe imported refers to iOS clients backups?
Thank you!
'Imported' means data user uploaded through your server to cache to iCloud.
Tags: Servers and Enterprise Software
Similar Questions
-
Is it possible to direct "log entry" for a syslog server-specific ACL?
R1 (10.177.142.1)---f1/0 R2 f1/1---(192.168.1.3)R3
I want to apply a mild access list on R2 only in order to connect
entries and let me evaluate and find out how many users help
TELNET, www, and 3389 (RDP thing) protocols
from R1 go to R3. I can't block all traffic yet.So my journal on R2 works accordingly to log for TELNET, www, and RDP - OK entries.
Question:
Imagine I want to capture these logs for about 2 weeks and then analyze output such as
source IP that generated these topics can you please tell me what is the
best and easiest way to capture this in the newspaper to allow later analysis? I can put a syslog
IP of the server that will be used only by this specific ACL WATCH_PROTOCOL?#show R2 access-list
Expand the IP WATCH_PROTOCOL access list
permit tcp everything any eq 3389 journal - entry (2 matches)
permit tcp any any eq telnet log entry (36 matches)
permit tcp any any eq www journal-entry
permit ip any (226 matches)
R2 #.
R2 #show run | Access-Group Inc.
IP access-group WATCH_PROTOCOL in
R2 #.
R2 #.
00:14:38: % s-6-IPACCESSLOGP: list of the permitted tcp 10.177.142.1 WATCH_PROTOCOL (11
008) (FastEthernet1/0 ca01.0e80.001c)-> 192.168.1.3 (23), 1 packetR1 #telnet 192.168.1.3 80
challenging 192.168.1.3, 80...
Connection refused by remote host %R2 #.
00:14:38: % s-6-IPACCESSLOGP: list of the permitted tcp 10.177.142.1 WATCH_PROTOCOL (11
008) (FastEthernet1/0 ca01.0e80.001c)-> 192.168.1.3 (23), 1 packet
R2 #.
R2 #.
#show R2 access-list
Expand the IP WATCH_PROTOCOL access list
permit tcp everything any eq 3389 journal - entry (2 matches)
permit tcp any any eq telnet log entry (36 matches)
IP to allow all (67 matches)
R2 #show run | Access-Group Inc.
IP access-group WATCH_PROTOCOL in
R2 #.This sounds like a job for Netflow. I have provided links to the following documentation:
Netflow configuration (12.2 mainline):
http://www.Cisco.com/en/us/docs/iOS/12_2/switch/configuration/guide/xcfnfc.htmlflow-tools (to analyze netflow data):
FTP://FTP.Eng.oar.NET/pub/flow-tools/flow-tools-0.66.tar.gzPowerPoint, linking the two:
http://ws.edu.ISOC.org/workshops/2008/apricot2008/NetManage/presos/NetFlow/apricot-flow-tools-slides.ppt Let me know if this can help, -
Forgive me because I'm not that tech savvy but is it possible to display a server log in Mozilla Firefox (or any browser besides) and see why someone is 403 refused when they try to access a link that I posted? There seems to be not having only one person. Others have accessed fine.
F0xu5er said
I posted the link to a mobile device using Firefox. Displaying a link from a mobile device would cause the link any differently a person accessing this form one laptop, tablet or desktop computer?
A link is a link. You don't see anything broken in the link? If this isn't the case, I think that you who can put aside. Not to mention that it is normal for all the world.
-
I try to install the installer Com + security but there is error thorwing as... The subsystem of COM + deletes log entries of events in double to 86400 seconds. The removal timeout can be controlled by a REG_DWORD value called SuppressDuplicateDuration under the registry key next: HKLM\Software\Microsoft\COM3\Eventlog.
Product: MMFSecurity - error 1001. Error 1001. An exception occurred during the validation phase for the installation. This exception is ignored and the installation will continue. However, the application may not work properly after installation. --> FATAL: component not found ' MMF. Core.MessageSecurityComPlusHost.MsgCodec' we just install.
(NULL)
(NULL)
(NULL)
(NULL)the message resource is present, but the message is not in the string/message table
Hello
· On what operating system are you trying to install?
I suggest you to post your query in Microsoft TechNet forums as they are here.
Here is the link to the TechNet forums: http://social.technet.microsoft.com/Forums/en-US/categories
Refer to: http://technet.microsoft.com/en-us/library/cc774146 (WS.10) .aspx
-
Redo log entries to the online redo log files
Hello
I'm a little confused about the redo log entries.
I learned that LGWR writes redo log entries in the SGA, in redo log files in the following situation:
-3 seconds after the last validation
-redo log buffer has 1 MB
-redo log buffer data 1/3
When I take a transaction and if I change the wrong data, I have to cancel this transaction BUT the right now,
What happens if the LGWR writes redo log disk entries?
Is the bad transaction committed at all times?
2791011 wrote:
Hello
I'm a little confused about the redo log entries.
I learned that LGWR writes redo log entries in the SGA, in redo log files in the following situation:
-3 seconds after the last validation
-redo log buffer has 1 MB
-redo log buffer data 1/3
When I take a transaction and if I change erroneous data, I have to cancel this transaction at this time, BUT
What happens if the LGWR writes redo log disk entries?
Is the bad transaction committed at all times?
DML changes are "permanent" after that VALIDATION is issued.
When any COMMIT is issued, then changes can be undone.
-
Location of the server log alerts in 10G?
Hi all
Can someone tell me what is the location for the log server alerts in 10g. As we in 11g in $GRID_HOME/log/servername location.
Kind regards
Manish Singh.
Manish,
The server logs will be present under $GRID_HOME/log/host_name followed by different-2 folder containing different newspapers of the cluster process.
Who connect you talk too much? For each specific cluster component, you will need to go into specific folders of component and regain its newspapers.
As:
Grid_home, journal, host_name, crsd
Grid_home, journal, host_name, cssd
etc etc.
Read the link for more information below:
http://docs.Oracle.com/CD/E14795_01/doc/RAC.112/e10717/troubleshoot.htm#CHDGGHCI
Kind regards
Mukesh
-
How to allocate disk space for vCenter server logs
Hello
I plan to level 4.1 to 5.5 U2d vCenter on the customer site. One of the conditions set out in the vSphere upgrade guide is:
"In vCenter Server 5.x, the default size for vCenter Server connects is larger than in vCenter Server 4.x. make sure that the disk space allocated for the log folder is sufficient for this increase 450MB."
My question is how to allocate disk space for the log file and where can I find the disk space allotted to file papers to vCenter 4.1 existing?
Just see the free space on the partition where the vCenter server logs are stored. If it is insufficient, increase the size of the virtual disk and then increase the file system to the guest OS.
-
Hello
I use Siebel 8.2.2 and OPA 10.4.4 connector on a Weblogic application.
The most important fact, I use the server of determination.
The war of determination server has been configured and deployed, the connector is woking.
I have woud like to get session data that is only available on newspapers when log4j.xml is set to debug mode
< root > < level value = "debug" / > < Ref appender-ref = "CONSOLE" / > < / root > But I do not know where are stored the server logs of determination on the logic of the web. In the documentation it says how to use log4j.xml for determination of web which is not my case.
Could you help me please do my logs? (I already tried \\10.200.0.61\d$\oracleBI\logs and \\10.200.0.61\d$\oracleBI\user_projects\domains\bifoundation_domain\servers\AdminServer\logs)
Thank you.
Orlando.
Hi Orlando,.
You may need to make some configuration of your weblogic server.
In the weblogic console click environment > servers > (server) and take a look at the logging configuration.
The setting that you probably want to turn on is located in the section advanced and is called "Redirect stdout enabled logging" and is described as:
When activated, it redirects the standard output of the JVM that runs an instance of WebLogic Server, WebLogic logging system. The content of stdout is published on all destinations registered newspapers, like the console terminal server and the log file
Another solution is to specify an explicit position for the determinations of the sessions server by adding an appender. For example.
See you soon
Frank
-
Cannot delete the log entry: error
Hello
I get the error "Unable to delete the log entry" during an attempt to delete from a line in a journal template. It reproduces the newspaper.
Thank you
CHEK
Thanks for your reply KK.
I have not found something in the newspapers.
Problem is solved. I did clear files invalid on the application that is having the problem. If the problem is resolved. I deleted the line of the journal.
Steps to follow:
1. go to the console of the workspace and to connect as a user admin
2. open hFM application.
3. click on peacebuilding-> data-> Manage
4. Select the icon of the eraser to erase the invalid clear records.Thank you
Mohan
-
HOWTO server logs for vm config
I need to check and maintain logs for all virtual machines which vCenter Server provides (judgment of the vm, vmotion, network errors migration,...) and so I ask if it is possible to configure to send logs to an external syslog server. Is there a document on this subject?
Find the event detailed component are recorded in the journals of vcenter. Yes they contain this info.
-
vRO workflow crashes with Exception when content Server.log contains ' / ' character
Hello
Just noticed this this weekend and I wanted to check if anyone has a workaround or fix. I have a workflow that uses a call to Server.log for some info for future recordings. However, if the connected content contains a character ' / ' the workflow closes and I get a JDBC exception and the workflow ends.
There is an old post from the community on this topic where it is suggested that this would be fixed in 5.1 vCO. I use 5.5.1
Anyone else seen this?
Maximum length is defined on the database level. It should be 1024 characters for the second argument (optional) Server.log(text,info) and 255 characters for the first argument.
I don't think it is documented in the API Explorer.
-
Tool for reading the PCOIP server logs?
I was wondering if there are viewers of the newspaper or the tools to read the location a little easier pcoip server logs.
c:\programdata\vmware\vdm\logs
This is a nice tool, aside from that you can use the tools of teradici
Tools for deployment of PCoIP Protocol (15134-1082)
Keep this article handy if you try ti solve the problems of disconnection
-
Can remove the server.log file because its size is so big?
Hello
Can someone tell me if I can remove the server.log file removed
$INST_TOP/logs/ora/10.1.3/j2ee/oacore/oacore_default_group_1
$INST_TOP/logs/ora/10.1.3/j2ee/forms/forms_default_group_1
$INST_TOP/logs/ora/10.1.3/j2ee/oafm/oafm_default_group_1
?
And also I found another file "default_group ~ forms ~ default_group ~ 1.log" under the directory "$INST_TOP/logs/ora/10.1.3/j2ee/oacore/oacore_default_group_1". Its size is 32254416. No problem if I removed to free up space? Help, please. Thank you very much.
EdmondYou can delete these files without any problems. Just make sure you stop the services of the application first, remove files, then start the application services.
Thank you
Hussein -
Suggestion: Add timestamp in all Onyx log entries
In the journal of Onyx, there is sometimes a timestamp and sometimes there isn't.
Could you please include a timestamp on SOAP all the dumps of the envelope in the newspaper?
____________
Blog: LucD notes
Twitter: lucd22
Hi LucD,
Thanks for the suggestion! It is indeed important to have a stamp on each log entry. Your suggestion is classified as a feature request in our database and will run in a future release.
Kind regards
Ignat
-
where are the location server log and the dimension to generate the error file located?
I am running a build script and I got this error. Can someone tell me the location of the files below? (The server log and Dimnension generate error file)
Construction of Dimension ERROR - 1007083 - failed. Error code [1090004]. Check the ser
file log of worm and the dimension generate file for possible more info...
Thank youI guess you are on Version 11 as your last post was on this version.
You are customer of the EAS, take a look at \Hyperion\products\Essbase\eas\client
If you load using maxl you should have a file of errors defined in the script.
Newspaper to take a look at \hyperion\logs\essbase there will be essbase.log and application logs are lower than for example \hyperion\logs\essbase\app\Sample\Sample.logSee you soon
John
http://John-Goodwin.blogspot.com/
Maybe you are looking for
-
a Web site asks me to install something, I'm not sure that it is legitimate
Hi, all. on a tourist site, I clicked on the link for a list of shopping places. I get a notice that says: "you must install this thing to get this link to work." It has a logo of firefox, but I'm still nervous, having obtained Burns very badly once
-
Why am I getting messages of "not responding"?
I'm on an IBM Thinkpad T42, which was later made as it crashed. He haqd was working well betai rather slow. Recently, I often the message at the top next to the name of the web site or doctrine or... "not responding". I'm also told that virtual memor
-
Hey everybody, I've had my Aspire E1 - 571G for about 2 years now. Data sheet: 3230 M i5 12 GB of RAM (1x4Go) (1x8GB) - 1333 MHz (updated original 4 GB of RAM) WD 500 GB (5400 RPM) HARD DRIVE Windows 7 Ultimate x 64 He began to develop a problem then
-
How can I fix the problems faced by customers with moving, copying and deleting files?
-
What is HPQWare? Can I delete the file or the program? What are my consequences if I do? On a Windows Vista Home Premium SP2 64-bit HP Pavilion dv9700 Notebook.