OptiPlex 7010 with Zotac GTX 660 Ti, no video output

Similar Questions

• HP Envy 700-214 Compatiable with GeForce GTX 660

  Wondered if the NVIDIA GeForce GTX 660 was compatiable with my system.

  Hello

  The 660 NVIDIA should work. Review the items below.

  Guide to Seleting a discrete graphics card

  Computer does not start after the installation of a video (Windows 8) card

• Try to upgrade the video card for an Optiplex 7010

  Hi all

  I searched the forums and found answers, but most are about a year old. I have an Optiplex 7010 with the following configuration:

  G1XNT 1 Hard drive, 1 TB, S3, 7.2 K, 512th, SGT-GRDABP

  VT8FP 2 Dual In-Line Memory Module, 4G, 1600, 256 X 64, 8, 240, 2RX8

  H924H 1 Card, controller, 1394 has Pc Interface, full height, Lsi Logic, unleaded

  VVYN4 1 Graphics card, 1 G, OUGA9, full height, W8

  G8CNY 1 The Assembly, radiator, shroud, Performance, average lap, 95W

  8JY5G 1 ASSEMBLY, CHASSIS, INTEGRATED PWA TOUR, 7010, FPAC

  D7RF6 1 Processor, IVB, I7-3770, 3.4, 77 w, 4 c, E1

  I realize to update my graphics card, I need to upgrade from my diet, and I'm fine with that. What I really struggle with, is what are the specifications of the motherboard on this computer. I would like to know what my bandwiths PCI-E are on it (IE 1 PCI-E X 16 1 PCI-E X 4?)

  Also, I would get the best graphics card I can get to what will fit (for adobe work). I measured the space and wow is not much... most graphics cards are 10 "long, and the space, it seems to me is only a fight 7.5" before I launch into the box for hard drives. I assumed that I could cut out the box and free up space, but thrilled to hear what others use.

  Also, I noticed there are only two PCI-E ports, but the 2nd is probably useless due to how close his pushed to the bottom of the case so I'm stuck with a 1 GPU option.

  Keep all this in mind and without cutting into the hard drive cages, let me know if this could work:

  GPU: MSI N760 ITX gfx card http://www.newegg.com/Product/Product.aspx?Item=N82E16814127772

  Power: 600w http://www.newegg.com/Product/Product.aspx?Item=N82E16817438014 EVGA

  Don't get me wrong, I would like a more powerful GPU (I push 2 monitors 1920 X 1080), but I don't see how I can get whatever it is also gone...

  Feeding okay? It works for that?

  Thanks for all the help and advice that you have!

  Food looks good.  It is only 5.9 "long which is what you want for your snap custom mount you have on this system.  The MSI card is very short, it looks like a good way too.  Your system has a PCIe X 16 2.0 slot for the video card.  Speeds of the lower PCI X 16 slot is connected to X 4.  With only a 250 watt power, this system is all designed for video cards more if two small.  The 760 GTX is a powerful video card.  I see no need to put a video card premium that costs $500 or more in a Dell system.  To do so, make a custom version of a case of nice game for better air flow and cooling.

• EVGA GeForce GTX 660 Ti

  I have a HP e9180t desktop computer and I'm looking to upgrade to an EVGA GeForce GTX 660 Ti. This video card is compatible with my desktop computer?

  Thank you

  Hello:

  Unless someone actually installed one in this model, it is difficult to say with certainty at 100%.

  However, based on the specifications of the PC should be, because the specifications state that the PC has a P/S 460W.

  Just check to make sure that food has two connectors 6-pin PCI Express (PCIe), because it is a requirement for the card.

  Paul

• GTX 660 m and 3ds Max and Autocad 2013

  My y580 with the gtx 660 m does not allow 3ds max and autocad 2013 programs work.

  What is happening is that the program opens then application error and closes and it is with the card Nvidia be used in programs.

  However, I found workaround that said running applications with the intel HD 4000 instead. BUT what is the point to make that if you cannot take advantage of the GPU acceleration?

  Everyone knows about this problem?

  It was the latest nvidia driver causing the problem, that's what I condluded. I have returned my 295.55 default driver that came with the y580 and max and autocad works again.

• Y580 GTX 660 m & HD 4000 supported Technologies?

  Hi again, I have another question on my new Y580 and his GTX 660 m. NVIDIA posted: support technology: 3D Vision, CUDA, DirectX 11, PhysX, Optimus, OpenCL, DirectCompute.

  When I open the GPU - Z (with my gtx 660 m running) on the bottom, I don't get the DirectCompute box checked, it's normal, I need to download something? Because I have checked on the HD 4000 despite what GPU is currently active.

  Thank you.

  I installed the beta geforce driver and now the box is checked.

• (Redirected) OptiPlex 7010 ultra slow operation of SSD

  Introduction:

  1. On OptiPlex 7010 with Win 8.1, I spend 1 TB HDD 500 GB Samsung EVO 850.
  2. All the drivers are updated, updated BIOS to newest. I use Samsung Data Migration to transfer the data.
  3. Fully updated the system works OK with original 1 TB HARD drive

  Result of migration:

  1. Slow start system
  2. The extremely slow system operation.

  Based on the Internet reading I have the following Questions:

  1. The result is slow bad SSD op?
  2. The result is slow op of aversion Dell Samsung SSD ;-)
  3. Anyone know anything unusual on OptiPlex 7010 (smart Marvel, capacitors or any other hidden gems)? (Software is updated so I guess that's a program installation configuration or HW)

  Receive a response

  Best of this post in the Hardware Forum general office, here:

  http://en.community.Dell.com/support-forums/desktop/f/3514.aspx

  Bev.

• This graphics card back on my Optiplex 7010?

  Hello

  I want to improve my Optiplex 7010 with a high-end graphics card. I'll buy a new power supply, but the problem here is that this card on my pc?

  The card is ATI Radeon HD 7950 with dimensions 275 (L) x 115 (W) x 42 (H) mm. The size of my optiplex is 21.5 x 21.5 x 13.8 inches. It fit?

  You can answer the question for yourself with a plastic ruler. The answer is THAT NO, it won't FIT in ANY model because hard drives are on the track of the cards that are over 9 inches long.

• Card NVIDIA GTX 660 it not recognized?

  PP CS6 Mercury Playback engine supports the Nvidia GTX 660 Ti card. I just installed the card and it is not recognized in a new project.

  I have not reinstalled the software again, this part of the installation option.

  Any help or suggestion?

  In Explorer, navigate to C:\Program Files\Adobe\Adobe Premiere Pro CS6

  Notepad as administrator, open cuda_supported_cards.txt

  Add a line with "GeForce GTX 660 Ti" without the quotes, save the file and restart PR you can now enable CUDA acceleration in the project settings.

  Repeat this to C:\Program Files\Adobe\Adobe After Effects CS6\Support Files

  and the raytracer_supported_cards.txt file

• 'No Signal' - ti GTX 660 does not not with a card mother H-Joshua-H61-Μatx

  Hello

  I have a 2302eam HP pg with a 550w PSU ready to run a gtx 660 update ti GPU. However, I get only "no signal" on my monitor.

  As far as I know, with the power supply update, the PC should be end run the card.

  Is there a compatibility issue with my motherboard? Or is there something I can do to help solve this problem with my BIOS?

  I don't see any option in the current (and last v8) BIOS to disable the integrated graphics card and run the new GPU since the pci slot.

  What could cause this problem?

  Thanks in advance,

  Punchpidge

  Hello

  Have heard, if you have a UEFI Bios, you enter the BIOS, disable the boot safe boot and enable legacy in order to allow the new video card. All things being equal, it does no problem power supply.

  Don't know what OS you are using and did not find the model number you have indicated in your message.

  Finally, it should be to uninstall the existing video drivers, close, install the new card, then install the new drivers to restart managed in the operating system.

  Jaco

• White map too screen of Nvidia drivers on Windows 10 on Alienware M17X R3 - no 3D with GTX 660 m Nvidia in R3.

  After getting the SSD for work and most of the other drivers in Windows 10 I came across to CONV error while starting the GeForce program to update the card nvidia GTX 460 M graphics drivers for my M17X R3 3D. Is not the Lone Ranger with this problem it has been discussed on the Nvidia site and a beta version of GeForce has been recommended. It seemed to solve these problems for a while until that they solved the problem in the next update released version 358.50 for win 10 64-bit. I have not had the problem since this upgrade. Unfortunately, it is not an option on the Dell Web site for display drivers.

  I also bought the GTX 660 M install in the M17x R3, but I might as well have bought a rope to use the computer as an anchor. It would have been more useful. Regardless of the many people use it in the M17X R3 none of them use the 3D feature. I got the card to operate for the graphics and PhysX features only and I had to change many infs for this. The 3D feature is not supported in the chipset of the motherboard. At least not in the Sata mode. If someone got the GTX 660 M Nvidia Graphics for work in 3D on the Alienware M17X R3? If so, what was the secret?

  Concerning

  Big3D Emerson

  If somebody has got to work in 3D M17X R3 in Windows 10:

  Hello

  Unfortunately, according to the policy document, the M17x series is not supported on Windows 10. Some users have successfully installed Windows 10 on these systems not supported. But they have all the pilot survey (example = 7/8/8.1 driver installation) to force it to work. Dell doesn't have the resources to do this on systems not supported.  I recommend that you also try this announcement on Notebook Review and Alienware Arena forums for assistance.

• Pavilion p6257c-b: HP pavilion p6257 c - b is compatible with 750 GTX ti?

  Is my HP pavilion p6257 c - b compatible graphics card Zotac GTX 750 ti? If so, what would I need to do to install it. I am looking to update my graphics card worthy games, so please recommend me for my computer parts.
  
  Also, should I upgrade or simply create a new one?

  LegitGamer1017, welcome to the forum.

  No, the GTX 750Ti be compatible with the motherboard.  750Ti GTX requires UEFI in the motherboard instead of a standard/Legacy BIOS.  The last video cards that does not need UEFI were 640 gt.

  I've built computers for games in the past, but HP has built them unless I can and they work great.  I have a HP Phoenix 860-170VR and I play all the latest series of COD on the highest settings.  I suggest you have a look at it and others built by HP.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• This card works in my PC? GeForce® ZOTAC GTX 480 in a HP Pavilion

  Hello everyone

  I have a small question I need help with my son computers, details are below.

  Computer:
  Computer Type PC ACPI x 64
  Operating system Microsoft Windows Vista Home Premium
  Operating system Service Pack [TRIAL VERSION]
  Internet Explorer 9.0.8112.16421 (IE 9.0)
  DirectX DirectX 11.0
  CHARLIE-PC computer name
  User name Charlie
  Connection domain [TRIAL VERSION]
  Date / time 2012-10-11 / 23:18
  
  Motherboard:
  CPU type QuadCore AMD Phenom X 4 9550, 2200 MHz (11 x 200)
  Name of the motherboard Asus M2N68-(Narra3) (1 PCI, 2 PCI - E x 1, 1 PCI-E x 16, 4 DDR2 DIMM, Audio, Video, LAN, IEEE-1394)
  Motherboard chipset nVIDIA nForce 430 6150SE, AMD K10
  Memory system [TRIAL VERSION]
  DIMM1: Qimonda 64T128020EU2.5B2 1 GB DDR2-800 DDR2 SDRAM (6-6-6-18 @ 400 MHz) (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz)
  DIMM2: Qimonda 64T128020EU2.5B2 [TRIAL VERSION]
  DIMM3: Qimonda 64T128020EU2.5B2 [TRIAL VERSION]
  DIMM4: Qimonda 64T128020EU2.5B2 [TRIAL VERSION]
  Type of Award BIOS (02/05/08)

  He wants a good graphics card for around £100 and I have my eye on this map

  GeForce® ZOTAC GTX 480 1.5 GB

  It says it is compatible with PCI or PCI 2.0 v1.1

  but as I have I can not know what PCI version he has on his Board or any model number, all I know is that there the motherboard is Asus M2N68-(Narra3) and it's HP Pavilion

  Hello:

  As far as the PCIe slot is concerned, the card should be fine.  The biggest problem I see is that if you put a much larger power supply that comes with additional PCIe power connectors that need to plug into the video card, there is no way this card will work on your PC.

  That's what worries me.

  Package contents

  ZT-40101-10 P Driver disk ZOTAC Technology demos disc User manual Mini-HDMI-HDMI adapter Adapter DVI / VGA Double 6-pin to 8-pin power cable PCIe Dual MOLEX to PCIe 6-pin power cable

  Paul

• Change the GTX 660 stock cooler & fan on a H8-1151eo desktop PC

  Hello

  Just bought a PC desktop H8-1511eo a few days ago. Early on, the fan on the 660 GTX running notiably high speed and very noisy. Not noisy as broken, but as the * bleep * thing was trying to extinguish a fire

  Should the fan on the GTX speed automatically set according to the time GPU (29 C @ idle), or what? However, it seems that it is RPM max all the time (1700rmp - utility Speedfan). Downloaded the latest NVIDIA drivers (314). It did not help. It seems that the support of doenst motherboard the possibility to adjust the fan speed, or cela it locked from Bios or something?

  Any Bios Update on the h8-1151eo to control the fan speed?

  And anyway, I found a rather small (119 x 94 x 51 fan / w mm) VGA cooler (A r c t I c C o o l e r) 660 GTX. Only problem is that the maximum for the cooler 120W power dissipation and energy max is around 130W GTX 660. Do you think it will be a problem? I would buy the model more large (up to 200W), but I don't know if it can be inserted inside the Tower (136 x 138 x fan / w 51 mm). Is there a list of VGA coolers that fit in the case of ATX Mid of the h8-1511eo, or can you recommend one?

  -Thank you

  Hello

  It is the VBios on the video card in GTX660 that control the speed of the fan according to temperature changes, rather than the motherboard BIOS the Office.

  Is your PC of office still under warranty?  For the HP product warranty status check the web page.

  Your GTX video card maybe having problems. I suggest that you contact HP Total care and explain the problem.

  If your office is no longer under warranty, I recommend to replace the video card. Remove the cooler on a video card is not as simple as it is to do the same thing with a motherboard CPU cooler. The video cooler on the video card GTX660 may have replaced thermal interface or the VBios updated material.

  Erico-

• 2356ni P6: p6 2356ni and ti, zotac GTX 750 HP it will work?

  Hey my office's hp p6 2356ni, (mini-tower case). I want to use the chart zotac gtx 750 card ti. I would like to know if these two will be comapible in terms of PCI slot, the size and power. I have a UPS with a maximum capacity of 500 will

  Thank you.

  Hello

  Please report the number of HP for your PC product. How to find the model number of HP and the HP product number or leave model number HP automatically find your PC and HP network attached printers. This will allow others to review your question, make suggestions and review your answers. It is usually the best way to get help.

  The 500 inverter WILL have nothing to do with the NVIDIA graphics card.  However, UPS, run time may be shortened according to the overall power load.  If the 750 replaces a higher power graph card then the operating time could be extended.

  Wil you need to open your PC and do some measuring inside.

  Not every graphics card will work in any PC.  Know what the return policy is before you buy anything.