Calibrate accel gyro sensors

Similar Questions

• How the pressure transducer Validyne system-> Validyne CD280-Dual-> SCB - 68-> PCI-6024E-> LABVIEW works and how we can calibrate the pressure sensor?

  Hello

  I am completely new to LABVIEW software.

  I learn a LABVIEW code existing my pressure (attached) acquisition system which has the path of data as follows: pressure transducer Validyne--> Validyne CD280 - Dual--> SCB - 68--> PCI - 6024E--> LABVIEW and I have a few question:

  1. How does the complete system of the transducer to the LABVIEW work? That is, if we apply the pressure of the transducer, it will change the resistance of the probe then...?

  2. How can I find the equation that expresses the relationship between the pressure and the tension to the keys of the Validyne double-CD280 in the LABVIEW?

  3. If I want to do the probe calibration, what are steps?

  Thank you

  You did not include most of the subVIs.

• How to calibrate hp 7 and gyroscope

  Hello

  By practicing a game, I noticed that the character always hugging the right wall. How to calibrate the gyro?

  I downloaded an app to test the accelerometer.   The application displays it works well.  The game that I was playing must not be compatible with this table.  .  Thank you for your help.

• Qosmio X 870 has been repaired 3 times - VGA cooling module, 3D,.

  I purchased a Qosmio X 870 there's a little more than 12 months (December 2012) and on July 9, 2013 it was returned to Toshiba after I am home and turned the smoke machine find coming from the front right side of the machine. (* service report stating they replaced the VGA card *)

  I also previously say that the computer would be go to a purplish monochrome screen then independently turn black to try different drivers again, I could not solve this intermittent and would return to this issue.

  After I got the back of the machine 3D wouldn't work.
  Yet once on November 6, 2013, I sent the laptop for repairs. Yes I know it was a while before I returned, but I do not very often use 3D and wanted that it fixed before Toshibas 12 months guaranteed missed.
  Once more, I received the machine backward (service indicated the 3D cable was replaced and tested ok.)

  November 22, 2013 I turned on the machine and not 30 seconds after startup, a message came on the screen indicating that _ * there is a problem with the cooling system please return the Toshiba computer for repair.*_

  I fear that the machine was not tested before its release Toshiba

  I understand you very well.
  It s always annoyed if the laptop starts to malfunction

  It seems that the first fault was linked to the faulty GPU. Well, in this case only a GPU replacement can help solve the problem.

  I think that the second question (malfunction 3D) was related to the first question (replacement of the GPU).
  I guess that after the replacement of the GPU, the technician forgot to calibrate the 3D sensor.

  However, the number 3 (cooling system) may be just a false alert.
  Check if the temperature. If the temperature is OK (not too high), it might be
  I would recommend you to get the laptop to factory settings just to check if the message still appears.

  But in the event that this alert appears again, the cooling module must be replaced.

• A7000 S153 Auto Pivot has stopped working

  Phone has been blocked in landscape mode, I went into the menu to switch and turned off auto rotation... After that it doesn't work at all, I turned it on but screen will not turn, also I tried resetting hardware problem still persists

  Note from the admin; subject edited with phone & type ROM

  Hey, it's an error of calibration of the sensor.

  You need to reset and to recalibrate the sensors.

  Press the POWER button / STOP + FLIGHT UP

  then place the phone on a flat surface

  Select the first entry and press button WALK / stop

  Leave it to calibrate the g-sensor

  Wait for reboot

  its done

  Ajay provers

• Problems of GPS navigation after the 23.4.A.1.200

  After updating my Z3 Compact to the 23.4.A.1.200 firmware version, when I lorsque j' utilise uses a navigation app my position (the point) is displayed correctly but my direction (arrow) appears in the opposite direction. Navigate is not convinient, because if I'm heading North my devide believes I'm soing South and, therefore, gives me the wrong orders. First it something I can do about it, or I have to wait for a new update that solves the problems caused by this one?

  I checked with Google Maps maps & HERE and that they work as expected. You could try to calibrate your compass sensor. Just search any application of Compass on Google play. There are a number of those that are free.

  Another way to do is spend in Service Mode:

  Enter * #* #7378423 #* #* in the dialler.
  Select "Service test".
  Select "compass."
  Follow the instructions on the screen to calibrate the compass.

  It will be useful.

• Augmented reality video

  Hello

  I want to create something that is similar to the piece of work by Damien Hirst, All Hail of Damien Hirst, (All Hail of Damien Hirst! @ Tate Modern - Augmented Reality Art Intervention - Art occupy). I need to do for a graphic project, however, I do not know where to start.

  I hope someone can help!

  Thank you in advance,

  Joe

  This has nothing to do with EI. Who is the programming of things. Only, you create graphics and animations in AE, but real overlays and interaction must be encoded in an environment appropriate for the unit so he answers photo of the device, gyro sensor, tracking by GPS and all that...

  Mylenium

• Calibrate the accelerometer and orientation sensor

  Is it possible to calibrate the accelerometer and orientation sensor? For my motorcycle G sensors are not accurate? I think there is a way to edit some system 4.4.4 android files.

  Archies, please do not type in uppercase - this is considered rude and involves screaming.

  It is that nothing built-in in the phone, but there are some 3rd party apps that claim to calibrate the compass.

• How to calibrate the sensor of gravity on Z3?

  My gravity sensor is a bit tilted, but I can't find anything to fix.

  There used to be a possibility to do it on some old phones Xperia, but it seems that this feature has been fully subscribed.

  Y at - it all posibliliy to calibrate the sensor of system level?

  @slj_zc

  You may need to stop by your local care of Xperia, based on your previous posts

  http://talk.sonymobile.com/T5/Xperia-Z3-compact/bounce-back-still-happening/m-p/936387#M7046

  http://support.sonymobile.com/global-en/contactus/

• How to calibrate the heart rate monitor?

  How to calibrate the heart rate monitor that shows a too high concentration?

  Hello

  It is not possible to calibrate the heart rate sensor. However, various factors can affect the performance of the detector.

  During training, to optimize the performance of the heart rate sensor, ensure that you wear your watch fits on top of your wrist.

  Apple suggests that consider you the clamping Strip before starting a workout and it loosen again thereafter.

  The sensor is likely to give better results for the workouts that involve rhythmic (for example running) rather than the irregular movements (e.g., tennis). Other problems that can affect the performance of the sensor include the perfusion of the skin and wrist tattoos.

  More information:

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

• Problem of Orientation/gyroscope/accelerometer sensor Lenovo S920

  I just bought this phone and the learning function. somehow, I turned on the line on video beginning taking n video n found the problem of sensor of course. The line level is right, that if I want the oblique phone and found no app Setup to calibrate it.

  Measures:-went to the place I bought and staff restore factory default and the said device issue. It's 4 days phone and and it refuses to do the replacement. DAMmN, ITS MY HARD EARNING of MONEY AND I NEED a replacement.

  Lenovo Partner store where I bought:

  Amber Channel Trading Sdn Bhd

  Digital Mall, Section 14, Petaling Jaya.

  If it can be calibrated by App, you can recommend me to settle this YOUNG. I can't take the video using the level line and I CANTeven play a racing game, when I take the S920 is right, the car's side.

  If it's a device problem, I WANT a PHONE's REPLACEMENT IMMEDIATELY.

  NEED A SOLUTION IMMEDIATELY.

  Hello

  You can try if your detector is working correctly.

  Maybe just download this app from Google Playstore.

  https://play.Google.com/store/apps/details?ID=imoblife.androidsensorbox&hl=en

  and then check your sensor. If you still see a problem, you can seek redress.

  You must contact the store where you bought you phone.

  Best regards

  J.

• GYRO lock stabilizer CX760v

  I was wondering if the gyro for the stabilization mechanism can be locked mechanically as it seems it will get damaged. You can always hear it move in the unit even when turned off or disabled. Also is there a way to adjust its parameters so it can be less offensive during panning shots or is all fixed in firmware.

  Believe it or not Terence Malick used this camera to a vehicle in motion for a shot in a coming feature!

  The camcorder has an optical shooting, whereby the objective set + sensor is moved to compensate even moved fort ("Balanced Optical SteadyShot"). This furniture must also have freedom of movement when the camera is turned off. So if you move the device strongly you can hear it moving to a certain extent. This is not a malfunction. As the device is built very solid inside a metal frame and the lens and sensor are connected instead of simple parts, no damage can occur during normal operation (transport). However, it is recommended of course to use a well padded bag, as usual, when you carry the camera around.

  

• DaNI ultrasonic sensor

  Dear all

  I work with robot of DaNI, I have problem with the PING sensor which turns 90 degrees to the right instead of 180 degrees (from right to left)

  can someone show me the possible solutions?

  https://www.YouTube.com/watch?v=xUKOZTjYubk

  Thanks in advance

  When you install the actuator for ultrasonic sensor, make sure that you can move it by hand all the way to the left and to the right.  The engine has only a range of motion of a bit more than 180 degrees, so if you don't align the sensor in the center of the range of motion it will not move correctly.  Also, be sure to run the VI utility that calibrates the offset of the engine angle once you did.

• Send the data collected by sensors in cell phone android to Labview installed on a PC

  Hello

  My question is if someone knows a way to connect the mobile phone and the PC to share the values of the sensors of a telephone cell phone android (barometer, termomether, gyro, etc.).

  Can you the app DATA dashboard or any other application available on the Android market access data from these sensors and send them by a variable shared PC?

  Any ideas?

  Thanks in advance

  There is an application that allows you to transmit the values via the WiFi via TCP/IP or UDP connection. It is probably the best way to do it (and means that you don't have to write your own. You then just to write LabVIEW code to connect to the phone and listen to /lire data.

  For example - this looks like such an application (but there are many others): https://play.google.com/store/apps/details?id=com.ubccapstone.sensorUDP&hl=en

• Where can I download DUCCS to calibrate the screens U2415 and U2412M?

  Hi, I would like to calibrate two monitors, a new U2415 and a three or four-year-old U2412M. I saw the documentation for a tool of Reference called Dell Dell Ultrasharp Color Calibration System (DUCCS), but I am unable to find a download for it on the Dell site page - other links I found simply go to the launch of Dell support page.

  The oldest set U2412M to the point an artifact pronounced as a task of water on the right side (as U2412M that guy) and it moved slightly purple. The new U2415 seems that it might be a bit too yellow. They are quite different side-by-side, and I would be recognizing a tool that can help me calibrate the two as well as possible.

  Thank you!

  * CN0CFV9N7426167D269L
  * Self-assembled Asus P6X58D PREMIUM (LGA1366), Intel Core i7 930
  Windows 7 Ultimate, 64-bit
  * Sapphire AMD Radeon R9 Vapor-X 280 x
  * Crimson 16.7.3
  * DP, HDMI, DVI x 2
  * 1.2 Mini-DP on the U2415 DP, DP, DP with the U2412M possible
  * Reference Dell DP to the Mini-DP on U2415 cable, certified Accel VESA 10 ft DP to DP on U2412M
  * High performance
  * 1920 x 1200 for both
  * U2415 just bought Dell U2412M probably from Newegg
  

  Unfortunately, neither the U2415 nor the U2412M are supported by DUCCS. You need search and purchase a 3rd party colorimeter and software to calibrate the screens. The burrs on the U2412M is the default of yogore / mura and it cannot be resolved. Everything what we would have done is Exchange under the 3 years warranty period purchased.