Problems of GPS navigation after the 23.4.A.1.200

Similar Questions

• Problem with URL ReadyCloud after the installation of the FW 6.5 on RN312

  Hello

  After the update to the official FW 6.5, the URL of the ReadyCloud is always on "'https://readycloud-test3.netgear.com/client/en/welcome.html ' not on the production URL"

  What is the correct production URL?

  Thank you

  OK, it's a problem browser temporary files after the update, sorry!

  I have clean the temporary files IE11, now all URLS are corrected with links PROD. I have this url: https://readycloud.netgear.com/client/en/welcome.html

• Problem of GPS location after updating to IOS 10

  Anyone have problems with GPS location problem after update from IOS10?

  I drove Baltimore DC Regan airport, I tried with apple and Google map yesterday map, location was far from the highway, he could not determine where we are, we were on the road, but he kept us showing that we were on a local road to the highway.  Could not find 90% of time on my road.  Finally, I have to use my phone to brother with IOS9, we were fortunate that it has not updated to the most recent IOS 10.

  I wonder if anyone has the same problem after the update.

  Hello yinchiu85,

  I understand that your iPhone seems to have a hard time determining its location precisely. Fortunately, there are a number of steps you can take to help improve the accuracy of the information.
  

  Improve the accuracy of GPS

  GPS accuracy depends on the number of visible GPS satellites. Location of all visible satellites can take several minutes, with accuracy gradually increasing over time. To improve the accuracy of the GPS:

  • Make sure that you set the date, time and timezone correctly on the device in settings > general > Date & time. If possible, use the value automatically.
  • Keep a clear vision in several directions. Walls, vehicle roofs, buildings of great height, mountains and other obstacles can block the line of sight to GPS satellites. In this case, your device uses Wi - Fi or cellular networks to determine your position until the GPS satellites are still visible.

  If your iPhone is still unable to pinpoint your position, the next step would be to restore location Services.
  

  If you want to reset all settings to factory default location, go to settings > general > reset and tap reset card and privacy. When your location and privacy settings are reset, apps will be stop using your location until you grant them permission.

  On privacy and location in iOS Services 8 and later versions
  https://support.Apple.com/en-us/HT203033

• Problem of scanning even after the use of HP print & scan doctor

  Hello

  I have printer HP Deskjet 2050 J510 which gives me an error message "scanner communication cannot be established. I had visited the HP support portal & downloaded HP print & scan doctor. After you run this tool, it is said that it cannot solve the problem. It detects the first two steps of pilot (or can be) Manager & pilot agreed. But in the third stage it gets stuck to the top (win scanning can be, even after the restaring the computer). I use 32-bit windows.

  It seems that HP can't valer'evne fix bugs in its own products. It's pathetic.

  A real quick help will be appreciated...

  Hi alb7039,

  Follow the steps below to update the software to the latest version.

  First step: clear temp directory

  1. tap folder in the race or search programs and files of field

  2 Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

  3. proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79309-1&CC=US&DLC=en&LC=en&os=4063&Product=3635399&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know what you find?

• problem with magic network after the recent windows and mcafee updates

  There seems to be a conflict with of cicso latest windows and mcafee updates Network Magic platform. Hard to say which is originally the closing down due to the fact they both tend to update together or to the one right after the other. Could someone look into this?

  Hello

  Thanks for posting this question in the Microsoft Community.

  I'll certainly try and help you get the problem solved.

  I suggest you to check that the windows update history to verify that Windows update may cause the problem.

  (a) click on the "Start" button and select "Control Panel" from the menu that appears.

  (b) double click on "Add or Remove Programs".

  (c) click the checkbox next to 'Show the update' at the top of the window.

  (d) locate the "Windows XP - software updates" header. Below, you will find a list of updates all the date where they have been installed and the installation of the window.

  Provide us update KB number that may cause the closing.

  You can also use the shutdown Event Tracker to stop suddenly.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• I have a problem with my keyboard after the update using drivercanner

  Original title: my keyboard stopped working after the last updae

  OTEVA here

  Hi I have a problem with my keyboard after update using drivercanner I need help fixing this cause I tried looking for the installation of the upate that cause, but I don't have where to look.

  try a system restore to a date preceding the update.

• Problem with Windows Update after the removal of Virus

  My operating system is Win Vista 32 bit, had some virus closed my windows updates, have a view of the white page. Checked that my services and win update is in automatic mode has started, so I don't know why my updater gives me a red x saying windows updater is turned off.  Any suggestions?

  [Original title: Windows Update]

  https://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/problem-with-Windows-Update-after-removing-virus/3a8dd279-2732-4693-88bf-f5cea4afca96>

  It makes more sense. How to reset the Windows Update components?

  Yet, as indicated in The ball , the search results links do not work. I also used several browsers and DuckDuckGo. Maybe it's because the Windows Update Agent was changed some time ago and the article is no longer valid.

  EDIT: If the OP is also struggling to access the link I suggest using repair Windows updates available from tweaking.com. I suggest also using the Registry backup of the same author before hand.

  Repair the Windows updates

  http://www.tweaking.com/content/page/repair_windows_updates.html

  Registry backup
  http://www.tweaking.com/content/page/registry_backup.html

  I hope this helps.

• Problems with VPN tunnels after the upgrade to PIX 7.0

  It seems that Cisco has revamped the VPN process on the new Version of PIX 7.0.

  After I've upgraded, I noticed that AH (i.e. ah-sha-hmac, ah-md5-hmac) was no longer supported and all my container transformation games OH no were not converted.

  Another question, if you have enabled on Versieon 6.3, names when you upgrade, tunnel groups will be created (formerly "identity isakmp crypto, crypto key isakmp peer ') which will include a hostname (hostname of identity) instead of IP as it was to the point 6.3. Guess what... Nothing works! Having to delete and recreate it using the IP address.

  See an example...

  tunnel-group OTHER_END type ipsec-l2l

  IPSec-attributes tunnel-group OTHER_END

  pre-shared-key *.

  The above does not work... Having to recreate using the IP address mapped to OTHER_END...

  tunnel-group 2.2.2.2 type ipsec-l2l

  2.2.2.2 tunnel-group ipsec-attributes

  pre-shared-key *.

  Furthermore, I have problems with my racoon and freeswan extranet... Did someone recently updated with success and other gateways VPN provider (i.e. checkpoint, Freeswan and Racoon) work?

  We found the solution for this problem. It appeared that the perfect forward secrecy is enabled at the other side. If a 'card crypto outside_map 10 set pfs' is necessary. With the pix 6.3 version that appears not to make the difference, the vpn works even with pfs disabled on the side of pix.

• screen problem, black 2009 m after the login screen

  Since I downloaded the updated HP I noticed my monitor freezes for like a minute after the Windows 7 log on screen. The log on screen is visible, but after that it fades to the transition to the desktop, the screen stays black for a minute and the only thing visible is the pointer. Office windows load after that and is visible, working properly, etc, but since the update, it takes more time to load. I checked the monitor, the monitor display settings and driver windows display settings - everything seems to go well. I can't find a solution to this annoying problem.

  My pc is a HP Pavilion p6110y, running Windows 7 64 - bit (upgrade from Vista), Pentium Dual Core CPU E5300 @ 2.60 GHz, 6 GB Ram, 500 GB HD

  The monitor is an HP 2009 m.

  Any help would be great!

  You can try to use msconfig to prevent some programs from starting automatically.  It can be a process or service that is causing the delay.

  Here is a document describing the msconfig (it is for Vista, but the program is the same in Windows 7): http://support.hp.com/us-en/document/c00819747

  The first thing I would try is start diagnosis, reboot and see if the delay is gone.  If it is, then reload msconfig and go through the startup items tab uncheck a few at a time and restart to see what elements cause the delay.  This, until you have reduced the offending program.

  If start diagnosis does not remove the delay, then it might be something else in the system of the cause.

• Problem writing to XML after the dialog box

  I use ScriptUI to create and update XML in a document (using the Document.XMLElements methods).

  Before opening a ScriptUI window, I can read and write XML without problem.

  But after opening a window with some ScriptUI resources, I can only read the existing XML BUT NOT WRITE!

  My write method is called by a key event:

  ...

  var myXMLRootNode = / * instantiated * /.

  ...

  myWindow.okButton = / * instantiated * /.

  ...

  myWindow.okButton.onClick = function() {myXMLRootNode.xmlElements.add (myTag, object)};

  myWindow.show ();

  ...

  It seems that the onClick callback works OK for reading (I can recover all existing values without problem), but not for writing.

  Any idea?

  Hey!

  Well, the thing is that you must close the dialog before first in writing in order to document.

  myWindow.okButton.onClick = function(){myWindow.close(1);};
  
  var myWin = myWindow.show();
  
  if(myWin == true){
      myXMLRootNode.xmlElements.add(myTag, object);
  }
  

  I hope that helps!

  --

  tomaxxi

  http://indisnip.WordPress.com/

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• Problem blackBerry Q10 has after the last 10.2 OS update

  Hello

  I recently received a notice of update for OS 10.2 on my phone and everything went well.

  However, when I try to take a picture, I noticed that my media card is no longer recognized. I know all my photos and apps are still there, but I was wondering why it rises more?

  It is not available when you try to send files or via the file manager.

  I turned off the phone and it was restarted by removing the battery too.

  Help, please

  Thank you.

  Since you have done a battery pull I would make sure that the card is firmly connected. Try to remove and then do a battery pull and then after the re-start, insert the card and re - start again. Have you tried the media card into a computer to make sure that it is always good and readable? Also, when in-camera slide down to settings and make sure that you "save on media card" "lit".

• Problem with wireless connection after the automatic update of Service Pack 2

  Do not see my wireless modem to connect after that Windows Vista Service pack 2 and the update of security were auto-mis to update last night.  Can see modems of neighbors but not mine.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  Or transfer your question in this forum: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem of unknown Script after the installation of the software Reservo

  After you install the software reservo, I turned my computer off and when I turned back the script was unrecognizable-all the squares and circles so I can't anything with the computer now - help

  You never gave us the correct name for this program so far.

  Regservo is a registry cleaner, that you should never use

  You must contact the manufacturer of the program, Regservo, for assistance.

  You will need to support your problem in your own words that we cannot see your computer screen to say what the problem.

  Or you can reinstall the operating system, BUT which will result in the loss of all data (photos, documents, etc.)

  See you soon.

• Problems with Vista start after the update of Norton.

  I had problems with start-up since Norton updated and re-printing my subscription a few days ago.  Initially, the splash screen would freeze, I'll try to re-start, only to be refrozen.  After several attempts, with different amounts of time in between, I tried to start a 'normal', but are also intended to "launch fix."  Microsoft solution is to go back to "settings" before the new and improved Norton Security has been installed.  "Norton isn't too happy with this solution, warning: your firewall is disabled, you are vulnerable to all viruses known to humanity" and Norton resets security and the volley continues.  At some point, the screen may freeze, and I have to start all over again.  Had my Vista Home premium SP1 and SP2 installed this past year, patches and I have had no problems since, so far.  If anything is not easy? The pearls of wisdom would be greatly appreciated.  The garbage man comes tomorrow, I'm tempted to put my computer out of the trash.  Help. Please, I beg you.

  Hello, Heather,

  Boot safe mode with networking.  Download the following tool and run a full scan to exclude the malware.  If the system is infected, Norton will be compromised and would not be able to detect malware.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  Reboot - still problems with startup?  Uninstall Norton - use the uninstaller to remove all traces.  Restart your system and reinstall the software.

  Norton Removal Tool

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=20080710133834EN&LG=English&CT=United+States&product=home&version=1&PVID=f-home&entsrc=redirect_pubweb

  Once you have completed and reinstalled Norton, test - you still having the problem?  Try the link to clean boot troubleshooting below.

  The best advice I can give you is not no use Norton products.  Use Microsoft Security Essentials, which is freeware.

  Perform a clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135