call connects two phones?
Hello.
My first Iphone and I chose an Iphone SE 65 and are really pleased with it, it is a combined work and the phone at home.
My wife already had an Iphone and this is why we had an Apple that I used when I when I installed the phone ID.
Afterwards, we became aware that call logs is projected on two phones, which in itself is not a problem, just a little annoying, because when you use it as a work phone and just to see that you finally called and then suddenly there other numbers on the call log and that then it turns out that that is a number that has called the woman.
I tried to find a solution in the manual and so far, I've found that you have to turn 'face time' off and settings - phone - call on other devices - is turned off. but these two things have not helped, maybe someone here got an idea of how we should solve our problem with the call logs that appear on both phones.
Denmark Stig Greatings
It is strongly recommended that each person have their own Apple ID. Who's going to solve your current problem and also prevent a number of other issues. You can still share some things if you wish through http://www.apple.com/icloud/family-sharing/
Tags: iPhone
Similar Questions
-
SMS &; calls on two phones
Just upgraded iphones iOS 9.3.2. Whenever a SMS is sent or received on an iphone, it also appears on another iphone. This also happens on recent calls. Also just updated IMAC to El Capitian IOS 10.11.5. Do not know if it had nothing to do with this problem
Your phones are connected to the same Apple ID and the ID to be included in settings - Messages - send and receive
To stop this behavior - remove ID of the Apple send it and receive parameter area - messages left only the phone number
-
Receive phone calls on two phones at the same time
I had a co worker calling my phone but he calls my number of husbands too. his phone was my phone, I have the iPhone 6 s more and his 5
Transform settings > phone > call on other devices off or turn the settings > FaceTime > calls cell phones iPhone off.
More information about the options and features of continuity is in the continuity of use to connect your iPhone, iPod touch and Mac - Apple Support
Also, it is strongly recommended that each of you have your own Apple ID. You can always share items selected via the sharing of the family. http://www.Apple.com/icloud/family-sharing/
-
Two phones, an appleid calls noticed on both phones?:
We have two iPhones (Verizon). Nor has iMsg or turned on Facetime. Both are scrupulously kept iOS 9.3.4. One is the 'principal owner' of the Verizon account. The other is one second line (phone number) on the same Verizon account. Both use the same appleid.
When a call is made from or received on a phone, this call is logged in * two * phones. It is especially annoying and inappropriate for two unique phone numbers. Everything what Verizon officials have been able to offer is turning off Facetime and iMsg on two iPhones. While it makes no sense at all, we did, nothing helped.
Just in case, I thought I would put the question here on the community forum. Always full of hope.
F J Poblam wrote:
We have two iPhones (Verizon). Nor has iMsg or turned on Facetime. Both are scrupulously kept iOS 9.3.4. One is the 'principal owner' of the Verizon account. The other is one second line (phone number) on the same Verizon account. Both use the same appleid.
When a call is made from or received on a phone, this call is logged in * two * phones. It is especially annoying and inappropriate for two unique phone numbers. Everything what Verizon officials have been able to offer is turning off Facetime and iMsg on two iPhones. While it makes no sense at all, we did, nothing helped.
Just in case, I thought I would put the question here on the community forum. Always full of hope.
Do not use the same apple ID.
-
How to generate a call via mobile phone connected to the pc by usb
Hello
Comment on the call of the UN peut-on generate via mobile phone (nokia6680) connects to the pc by usb from labview?
I have installed "nokia PC suite". is possible perhaps-this one starting from the palette "Connectivity/library and executable" start this app and automatically generate a call to a predefined number? It sounds complicated and ca me don't think so that it works...
Apparently these are the commands that allow a cell phone from a PC of Girardon. Y ' there way to use a hyperterminal type program pay to try their hand and then be able to use the VISA features in labview? Pour the moment, I don't see how start. Ports of HyperTerminal manages the communication with RS232 type but comment Girardon the USB Installer takes it a soft pour mobile phone USB connection behaves as a virtual RS232 port?
I have seen comment importer a dll in labwindows on another project but we must have the description of the dll, the functions name pay to use. In this case, I have all this.
Thanks if qq can help me car the, I'm blocking (I saw that there were messages on this topic but ca don't allowed me to establish a communication with the phone outside the nokia PC suite software).
My but is send an alert by such pour a data acquisition application that runs on a computer laptop not connect a network of the United Nations.
JF
Finally, it runs. When the telephone connection after installing nokia pc suite and a usb cable, the phone appears like adding a virtual COM and another element: "Nokia 6680 usb modem cable. Select the line corresponding to the additional virtual COM port, in my case, it appears as "COM17. Configuration is easy: choose transmission speed (bps 9800 or else up to 115200bps, apparently the phone can detect the selected speed of the rate), 8 data only bits, no parity, no flow control. Then you can send orders to:
Xxxxxxxxx ATD. followed by the return to call a wagon phone (the phone number is xxxxxxxxx), at the end of the command is required to call (if there is a detected error 'NO CARRIER')
to send an SMS, send:
AT + CMFG = 1
AT + CMGS = "xxxxxxxxx".
then tape the message to send, followed by Ctrl-Z (ASCII code: 0x1A)
If you are interested in this subject, I advice allows you to start the test with hyperterminal or another program to easily implement a serial communication, and then implement in Labview. I guess the AT commands are a little bit different with other phones like Nokia.
Note: to send Ctrl-Z with Labview, right click on the array of strings in the scheme of hexadecimal code, then select Add 1A and re - click to print the normal code...
-
The smartwatch can connect with two phones
I am looking to buy Sony smartwatch, and since I have two android phones, I was wondering if it would be able to view the notifications from two phones?
See you soon,.
Dimitar
Smart Watch can not be connected to two phones at the same time. So it will not be able to view notifications from two phones.
What are your thoughts on this forum? Let us know by making this short film survey.
-
Cannot connect call between two SX20
Hello world
I've implemented two Cisco SX20 units at two sites. When you attempt to place the call between two units, it is unstable. In particular, sometimes the call is connected, sometimes, it is not connected even if ping, tracert are Ok. It's very strange. I'm sure that the SX20 unit works well. If I make a conclusion that there is a problem with my network but I don't exactly know why.
All the world is facing this problem before?
Dzung.
Hey yours,
Disable NAT if you do not use.
Also useful to configure QoS, check on your link packet loss and bandwidth.
-
MY DROP of CALLS AND MY PHONE SAYS NO SERVICE, BUT I HAVE SERVICE
MY DROP of CALLS AND MY PHONE SAYS NO SERVICE, BUT I don't HAVE SERVICE. HOW CAN I SOLVE THIS PROBLEM?
< re-titled by host >
Hello
Follow the steps here:
If you cannot connect to a cellular network or cellular data - Apple Support
-
Why two phones ring at the same time
I've recently updated two phones in my house ios 9.3.1 and now when my phone rings, my husband also rings. Can anyone help?
Looks like you share an Apple ID. Is this true?
Try to go to settings - calls - on other devices and move the scale in front of the unwanted appliance to the left.
-
Connect two BT headsets at appleTV4
Hello
Is it possible to connect two headsets bluetooth in appleTV4 at the same time?
Apple say several units at the same time, the exodus headset and controllers, but do not know if both headphones work.
Best regards
Erik
Bluetooth audio sends only the stream to a pair of headphones. However, you can buy dispatchers bluetooth spare parts in order to get the desired results, but as computers, tablets and phones only 1 headset can be paired at one point with the ATV...
-
original title: Microsoft Netmeeting
Can I use NetMeeting to connect two computers in different physical locations but a local call using NetMeeting to dial a number to the other computer by a traditional dial-up 56K modem via telephone lines, (US Robotics ISA 56 K Win Modem kVoice) dialing the telephone number of the other person & their dial-up Modem too? NetMeeting there software to do this, or do we need to use other software, downloaded or already in Windows XP? Can we use NetMeeting on Windows XP Home Edition or XP Professional? We do NOT want to go through the Internet, as our students do not have at this time of money to afford Internet connectivity. . You want to use NetMeeting for tutoring purposes.
Hi Rafael,
Yes, you can use NetMeeting to connect two computers. Follow the steps in the article.
How to turn on the feature Windows NetMeeting Remote Desktop Sharing in Windows XP Service Pack 2 or Microsoft Windows XP Tablet PC Edition 2005
-
My provider of VOI (BasicTalk) informed me that I could filter my phone via my computer using an ICS. My phone receives calls but I cannot be heard when I try to call. I live far, far in the glue... can't even get cell phone service and I had to get internet through flat (hughes aircraft). I mainly use the CAR phone as an answering machine... when a call comes in, I play back, the message, and then sink 25miles into our nearest town to get cell phone service and make my calls by cell phone. I have no other options available for the telephony service. It's obnoxious, but that's all I have right now. I knew that the CAR would work this way, but I decided that it was better than nothing. When I discovered that my son is able to use its earpiece via Xbox Live and has no trouble at all, I thought that there must be a way around this problem. So I called basic talking and they told me that it was no help... after that I begged for help, they finally checked around and advised I could use a VOI and gave me this address Windows. I found the site of ICS, but still don't know how to use the phone on this system... Any ideas or suggestions? Any help would be greatly appreciated!
Hi Rhonda,
You can, see the following Microsoft article and check if that helps.
Using ICS (Internet Connection Sharing)
Keep us updated on the State of the question
-
Smartphones blackBerry BES/BIS and two phones
I have two phones, a BlackBerry "BOLD" and Apple Iphone 3g. Is it possible to get my BES email on both phones. Somedays I carry the BlackBerry "BOLD" and somedays I carry the Iphone 3 G. Tips, ideas, advice or tips are welcome.
I have the BES/BIS on "BOLD" data packet and data package IPhone 3 g with Blackberry Connect for the mail of the company.
Thanks in advance
If your company supports Activesync and BES so technically you should be able to synchronize two devices. Simply enter the Exchange settings in the iPhone and you'll be ready to go.
-
block incoming and outgoing calls for some phones
Dear all
I have some phones like the kitchen, to block incoming and outgoing calls to the phones of these kitchen and I want these phones to call only internally. I have E1 gateway H323. How the configuration it will be CSS and Partition?
Thanks and greetings
Ideally, you need to two CSSs for this - a CSS gateway and a device of CSS. Type the extension of the kitchen a new partition. Add this new partition to the CSS but not the CSS bridge. In this way the incoming calls are blocked.
For outgoing calls, you will need to another partition and CSS. The partition must contain the model 9. ! (or whatever your outdoor access code) and should block it. It may be the translation or boss of the road according to the design of your CUCM numbering plan. This model will be assigned to a new CSS called Block_All (or something), and this must be attributed to the level of the line.
-
Hi, I use stratus for a game and I want to know if there is a way I can connect two peers automatically, so they just go for the 'Lobby' and here they are waiting for an exchange of pop up, no help, any link, everything contributes to
Thank you and best regards!
At least one counterparts must 'know' someone else neerID to establish a connection. But there is only one solution, using code on the server side (php + SQL, for example).
The 1st peer (let's call it 'host') sends to the server a message "I am here" with his nearID (which is stored on the server) and receives the response from the server if there is a 2nd peers already here. If this is the case, the 1st simply connects to the 2nd and 2nd connects to the 1st (using onPeerConnect event).
What to do if there is no the 2nd peers again?
When the 2nd peer sends is "I am here", the 1st is already there, so the 2nd nearID receives 1 and connect.
Without using code on the server side it is impossible, I think.
Maybe you are looking for
-
Life sentence with CanoScan 9000F Mark II in "mavericks".
I've been seen this problem for quite some time now and hove through the many posts about it and tried the fixes, but in vain. I "upgraded" to the mavericks and now whenever I use the scanner is leaving unexpectedly. Sometimes I am able to scan once,
-
OS: Windows Vista External drive A:. HI: I have several disks I want to save to a flash drive, but when I pop in some disks in my a: drive I get the following message: you must format the disk in drive A: before opening it. you do not want to forma
-
How can I get an installer for Windows Vista drive?
Need windows on a drive! I have an acer aspire 5315 with OEM windows vista Basic. I want to perform a new installation of this version of windows on my laptop that there have been some problems (multiple annoying windows error codes) and want to star
-
BlackBerry new Z10 Z10 - implemented hangs after installing the new software update
updated to 2474 and he is suspended without interruption since then. If I use SMS and then try to use the browser, it simply doesn't work. If I restart then I can use browser but there again if I want to use other functions, so I need to restart it a
-
My computer is in safe mode.
My computer is stuck on safe mode, all this because of a gadget that I downloaded. As soon as I installed it, I fell, and now all I can do is run on safe mode, which limits a lot of things I can do on the computer, for example of minecraft. Can someo