Windows Server 2012 R2 - Hyper-V role

Similar Questions

• Can not remove the print server role (Windows server 2012)

  I have a small question... I'm trying to remove a role (print server) on my Windows Server 2012. (Yes I know, I need to go to "Add/Remove role")

  

  but each time, the server establishes the uninstall procedure, but when it's time to restart and complete the procedure... the server fail and cancel everything... so in the end I always install the print server.

  

  I try to stop a link of service in this role (as a spooler, printing...) but samething.

  If anyone can help me, I really appreciate it.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2012 HyperVisor_Error bugcheck 0 x 00020001 PE R910

  In case someone else runs into this problem.  I recently met a bugcheck HyperVisor_Error 0 x 00020001 on a server PowerEdge R910 after installation of Windows Server 2012 DataCenter Edition, enabling the Hyper-V role and implementation of VMs.  The server would always restart.  I contacted Dell support and ran the full range of update all the firmware / bios / drivers, ran a material 3 days test without result.  I finally opened a support ticket with Microsoft.  They had a similar case that was solved by certain changes in bios Setup.  They gave me a list of the changes and I reduced to a configuration option.

  The culprit in my case was the parameter memory BIOS - enable the nodes.  After disabling this setting, the server seems to be stable.

  Just wanted to post in case anyone else has this problem and save some time/effort.  Try to adjust this and see if it solves your problem.

  -Mike

  Disable the parameter memory BIOS - uds

• T61 - Datacenter Windows Server 2012

  Hi all

  I need to install Windows Server 2012 Datacenter with Hyper-v installed on a Thinkpad laptop, because it is more durable compared to others, and I am planning buy Lenovo ThinkPad T61 with following specifications:

  Hello

  Looking system requirements here on the website of Microsoft, it seems that the T61 meets the system requirements to run Windows Server 2012, but it's largely because Microsoft does not seem to differentiate between the requirements for the Foundation, Essentials, Standard, and Datacenter editions.

  Personally, I would suggest to go with the bigger, more quick 2012-vintage (or most recent) laptop that I could find, for example a W520 or the W530.

  Kind regards

  Aryeh Goretsky

• Unable to use the service Windows Server 2012 EAP - MD5

  Hello

  I tried using MS Windows Server 2012 the authentication server installation, I turned on the NPS server, installation and set up roles. Then I followed https://support.microsoft.com/en-us/kb/922574 thread to add support of MD5 by default it is obsolete.

  Now I'm able to see the added registry entries and you can select the MD5 method, but I do not know where to give the password of the application. I added the InvodeUsername and the InvokePasswordDialog in regedit but its only gives me such an option to select the user name and password.

  I'm getting MD5 challenge sent by 2012 to the authenticator switch and finally Reject-request.

  Can you know me how to provide the password in 2012.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2012 R2 Request Time Out

  I installed Oracle Linux 7 use of Hyper-V on Windows Server 2012 R2. When I connect the Oracle Linux for internet (parameters--> network--> then set the device to run the internet), Oracle Linux takes the entire internet server and also indicates "Request Time Out" while that ping using command line on Windows server.

  Is it possible that I can fix this or can anyone help me solve this problem? Very Important and Urgent. Please help me.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Remote access Windows Server 2012 through internet with desktop connection

  Summer messing about with it for days and don't get no love.

  Try to connect with Windows 7 Ultimate edition to Windows Server 2012 Data Center version from outside my home network, Starbucks or McDonald's or my server at home.

  Tried all these steps found in this promising and useful article:

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  1. Allow connections to the computer you want to access remotely. DONE - ADDED to THE SERVER AND NON-ADMIN ACCOUNT to RDP GROUP of ROLES, using network level authentication. Connection of Win 7, so this method of authentication should not be a problem, I assume.

  2. Make sure that remote desktop is able to communicate through your firewall. DONE - FOR BOTH PUBLIC AND PRIVATE RULE.

  3. Find the IP address of the computer on your home network you want to connect. MADE - by using the ipconfig/all command

  4. Open your router configuration screen and worms forward port 3389 for TCP IP address of the destination computer. DONE - NOT TCP/UDP but TCP only, internal and external port goes. Note: The use of a booster signal wifi at the end of the House, it is a problem that requires additional configuration? I don't think he has an ip address or acts as a router. But in desperation I can try unplugging then again head the local Starbucks to try to connect.

  5. Find the IP address of the router so that the remote desktop can be found on the Internet. DONE - using "what is my ip", pretty easy.

  6. Open Remote Desktop connection, and connect. ACTUALLY, I think THAT, IN ENTERING [ip router]: 3389.

  But the result of the message is always the typical:

  (1) remote access to the server is not enabled.

  > But this is not true, that I am capable of the DRC at home on the server machine.

  (2) computer remote is not off.

  > But this is not true, as I just left home 30 minutes and sometimes it's rarely, only restarted.

  (3) the remote computer is not available on the network.

  > Don't know what that means. Of course the remote computer is not on the network, I am on right now. It's on my home network. But I can ping my router ip via cmd, then coming to the outside can be done; through my router, I should be able to access inside my home network port forwarding w. But no love.

  So... what to do, what to do...

  The wifi booster is a problem?

  Connects to the Data Center edition a problem?

  What happens if I uncheck the option ' use authentication NLA, is that the passage of the security risk?

  Any ideas about the configuration I could be missing before giving up and go for VPN or TeamViewer. I would really like to see materialized during all the time that I put in trying to run the DRC.

  Thanks for any input.

  / Markus

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Question of virtual operating system Windows Server 2012

  You can install and run an operating system of virtual 32-bit on a 64 bit Windows Server 2012 or 2012 R2?  This work through Hyper-V? What is the latest version of Windows Server that can run the 32-bit operating system?  This is necessary for the execution of 32-bit legacy systems that do not work on 64 bit computers.  Thank you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Configuration VPN windows server 2012 essencial

  What policy I need to add in the game until I will configure the VPN in windows server 2012 essential? because when I install the remote access roles I received a message when done that mention me politics. later I activate access and remote access and I can't access the internet, I disable access and remote access to I can connect to internet from my server.

  There is no forums for Windows Server community.  Windows Server forums are on the Technet site.  http://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

• How to migrate Windows 2003 R2 to windows server 2012

  I am tired of doing the Migration of Windows 2003 R2 to Windows server 2012, but there are some documents are only available in windows net Tech, I installed the migration on Source and destination server tools and its seat, but I don't know how to transfer roles from 2003 to 2012.

  If a know the steps please please let me know.

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Level broker for connections to windows server 2012

  Dear,

  I would like to know if there is any risk that the upgrade of the OS of the server holding the broker for connections, web access and management of the profile of windows server 2008 R2 to windows server 2012 or more to enable support of HTML5 connector? Please tell us what is the scenario for these updates.

  Concerning

  Hi Habibgha,

  Hoping to upgrade the OS on-site? It should work, but I don't know if it has been tested. Assuming that your infrastructure servers are virtualized, perhaps you could take a snapshot or clone this virtual machine and try in a lab environment?

  Or you can work on a step-by-step approach, the first stage being, if your current farm is 8.0.1 you can upgrade all roles on your current server on 2008 R2 for vWorkspace 8.5, then build a new VM with 2012 R2 and install IIS and access to the Web of vWorkpace role. Create a new vWorkspace site web access on the new server just for the connector of HTML5.

  I hope that helps!

  Thanks, Sam

• Remote assistance with vWorkspace 8.0 MR1 on a Windows Server 2012 R2 with Windows 7 Enterprise VDI (RDP8)

  We have a new VDI environment with the new Version of v 8.0 MR1 Workspace and real fixes. The connection Broker and the Hyper-V hosts running on Windows Server 2012 R2 Standard with real fixes. The VDI Clients are configured with Windows 7 Enterprise and RDP8. Unfortunately, we are not able to use by the broker for connections Remote Assistance?  We received the Error Message:

  The following error occurred during the occultation session 2 on the server...

  This function is not supported on this system. (120)

  I found the link: http://documents.software.dell.com/doc78042 or

  http://documents.software.Dell.com/DOC145926

  But this article has no recommendation for Windows Server R2 Standard 2012

  Any help, I would be grateful.

  THX in advance

  Thomas

  This question is not met at the time of the request

  I created a Blog post to allow other servers to 2012r2 2012r2 of remote assistance.

  However, it is not possible to use 2012r2 to help a win7 server remotely. It is simply not supported by MS and there is nothing we can do.

  If you can create a server 2008r2 to run the Management Console, you will be able to assist distance Win7 VDIs from here.

• After moving to Windows server 2012 VPN connection error

  Hello world!

  Recently, I upgraded my Windows Server 2003 SB server to a new server running Windows Server 2012.

  I started from scratch by creating a new domain, user, accounts etc.

  The new server is using the same IP address as the old server.

  Since then, I can't connect through the VPN. I have already added the role of remote access on the new server.

  When I try to connect to my Windows 7 laptop, I get this error:

  "Error 800: the remote connection does not because attempts VPN tunnels failed." The VPN server is maybe inaccessible. "If this connection tries to use an L2TP/IPsec tunnel, the security settings required for IPsec negotiation is may not configured properly."

  Any help with this is appreciated.

  Hello

  The question you posted would be better suited in the TechNet Forums. We have a separate team working on the server problem, so I would recommend posting your query in the TechNet Forums.

  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itprovirt

  Hope this information is useful.

• Windows Server 2012 R2 - HF ALL them do not install as "does not apply to this computer.

  Hello

  A general question about patch installs.

  I have several servers which are all Windows 2012 R2.   They don't have internet connections, so I have to install the patches manually.  I have download the HF from the download page of the ISO (https://support.microsoft.com/en-us/kb/913086) every month.    I collect them and install in a facility in bulk during a release cycle (once or twice a year).   I just realized that no. HF have installed since JUNE 2014.  Each HF that appears in the directory WindowsServer2012R2 do not settle with a message "the update is not applicable to your computer.  Which is fine if that was true, but... I get this message for each HF ISO since June 2014.  NOT a single HF, it's applicable to my computer.   Would this be the case?  No HF apply to my 2012 since June of 2014 server systems?

  This is my system information, and below that is the result of any attempt to install 95 HF

  C:\Temp>Systeminfo

  Host name: MYHOST
  Name of the operating system: Microsoft Windows Server R2 Datacenter 2012
  OS version: 6.3.9600 n/a build 9600
  OS manufacturer: Microsoft Corporation
  OS Configuration: Member Server
  OS Build type: multiprocessor Free
  Registered owner: Windows user
  Registered organization:
  Product ID: 00252-80025-36226-AA727
  Original installation date: 13/06/2014, 08:04:39
  Starting system: 16/03/2015, 14:34:45
  System manufacturer: Dell Inc..
  System model: PowerEdge R720
  Type of system: PC x 64
  Processor (s): 2 processors installed.
  [01]: Intel64 family 6 model 62 Stepping GenuineInt 4
  El ~ 2500 Mhz
  [02]: Intel64 family 6 model 62 Stepping GenuineInt 4
  El ~ 2500 Mhz
  BIOS version: Dell Inc. 2.2.2 16/01/2014
  Windows directory: C:\Windows
  System directory: C:\Windows\system32
  Starting device: \Device\HarddiskVolume1
  Local system: en - us; English (United States)
  Input locale: en - us; English (United States)
  Time zone: (UTC-07:00) time of the Rockies (U.S. & Canada)
  Total physical memory: 262 099 MB
  Available physical memory: 249 337 MB
  Virtual memory: Max size: 301 011 MB
  Virtual memory: available: 288 015 MB
  Virtual memory: in use: 12 996 MB
  Office (s) swap file: C:\pagefile.sys
  Domain: mydomain.sgn
  Logon server: \\MYHOST
  Corrections: 25 fixes installed.
  [01]: KB2862152
  [02]: KB2868626
  [03]: KB2876331
  [04]: KB2888505
  [05]: KB2892074
  [06]: KB2893294
  [07]: KB2893984
  [08]: KB2898785
  [09]: KB2898868
  [10]: KB2898871
  [11]: KB2900986
  [12]: KB2901125
  [13]: KB2901128
  [14]: KB2909210
  [15]: KB2909921
  [16]: KB2912390
  [17]: KB2916036
  [18]: KB2919442
  [19]: KB2922229
  [20]: KB2923392
  [21]: KB2925418
  [22]: KB2930275
  [23]: KB2931358
  [24]: KB2931366
  [25]: KB2936068
  Network cards: 6 interconnect installed.
  [01]: Broadcom NetXtreme II 10 GigE (NDIS VB BCM57800
  D Client)
  Login name: ISCSI
  DHCP enabled: no
  IP addresses
  [01]: 192.168.1.30
  [02]: fe80::38c9:e59c:5ac2:e0a1
  [02]: Broadcom NetXtreme II 1 GigE (NDIS VBD BCM57800
  Customer)
  Login name: NIC3
  Status: Hardware not present
  [03]: Broadcom NetXtreme II 1 GigE (NDIS VBD BCM57800
  Customer)
  Login name: MGMT
  DHCP enabled: no
  IP addresses
  [01]: 7.48.64.32
  [02]: 7.48.64.30
  [03]: fe80::f14e:9339:9326:c7fd
  [04]: Broadcom NetXtreme II 10 GigE (NDIS VB BCM57810
  D Client)
  Connection name: SLOT 5 Port 1_swport_VMRepwan
  DHCP enabled: Yes
  DHCP server: n/a
  IP addresses
  [05]: Broadcom NetXtreme II 10 GigE (NDIS VB BCM57800
  D Client)
  Login name: NIC2
  Status: Hardware not present
  [06]: Broadcom NetXtreme II 10 GigE (NDIS VB BCM57810
  D Client)
  Connection name: SLOT 5 Port 2_swport_VMOpswan
  DHCP enabled: Yes
  DHCP server: n/a
  IP addresses
  Requirements for Hyper-V: A hypervisor has been detected. Characteristics required for
  Hyper-V will not appear.

  I have a script that runs each HF installation...   If I manually run them without the tools I get the same results is not the script...

  Install 95 patches
  for Microsoft Windows Server 2012 R2 Datacenter x 64

  The repository path: U:\Patch Repository_4_1\2012_R2_HFs\

  1 Windows8.1 - KB2894852-v2-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  2 Windows8.1 - KB2894856-v2-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  3 Windows8.1 - KB2920189-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  4 Windows8.1 - KB2926765-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  5 Windows8.1 - KB2928120-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  6 Windows8.1 - KB2931358-x 64.msu patch status: ALREADY INSTALLED - JUMP
  7 Windows8.1 - KB2931366-x 64.msu patch status: ALREADY INSTALLED - JUMP
  8 Windows8.1 - KB2933826-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  9 Windows8.1 - KB2939576-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  10 Windows8.1 - KB2953522-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  11 Windows8.1 - KB2957151-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  12 Windows8.1 - KB2957189-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  13 Windows8.1 - KB2957689-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  14 Windows8.1 - KB2961072-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  15 Windows8.1 - KB2961887-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  16 Windows8.1 - KB2962872-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  17 Windows8.1 - KB2964718-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  18 Windows8.1 - KB2964736-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  19 Windows8.1 - KB2965788-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  20 Windows8.1 - KB2966072-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  21 Windows8.1 - KB2966826-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  22 Windows8.1 - KB2966828-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  23 Windows8.1 - KB2971850-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  24 Windows8.1 - KB2972213-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  25 Windows8.1 - KB2972280-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  26 Windows8.1 - KB2973114-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  27 Windows8.1 - KB2973201-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  28 Windows8.1 - KB2973351-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  29 Windows8.1 - KB2974008-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  30 Windows8.1 - KB2976627-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  31 Windows8.1 - KB2976897-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  32 Windows8.1 - KB2977292-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  33 Windows8.1 - KB2977629-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  34 Windows8.1 - X-KB2978668-64.msu patch status: DO NOT APPLY to THIS COMPUTER
  35 Windows8.1 - X-KB2982794-64.msu patch status: DO NOT APPLY to THIS COMPUTER
  36 Windows8.1 - KB2982998-v2-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  37 Windows8.1 - X-KB2987107-64.msu patch status: DO NOT APPLY to THIS COMPUTER
  38 Windows8.1 - X-KB2987114-64.msu patch status: DO NOT APPLY to THIS COMPUTER
  39 Windows8.1 - KB2988948-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  40 Windows8.1 - KB2992611-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  41. Windows8.1 - KB2993651-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  42 Windows8.1 - KB2993958-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  43 Windows8.1 - X-KB3000061-64.msu patch status: DO NOT APPLY to THIS COMPUTER
  44 Windows8.1 - X-KB3000483-64.msu patch status: DO NOT APPLY to THIS COMPUTER
  45 Windows8.1 - KB3000869-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  46 Windows8.1 - KB3001237-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  47 Windows8.1 - KB3002657-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  48 Windows8.1 - KB3002885-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  49 Windows8.1 - X-KB3003057-64.msu patch status: DO NOT APPLY to THIS COMPUTER
  50 Windows8.1 - X-KB3003381-64.msu patch status: DO NOT APPLY to THIS COMPUTER
  51 Windows8.1 - KB3003743-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  52 Windows8.1 - X-KB3004150-64.msu patch status: DO NOT APPLY to THIS COMPUTER
  53 Windows8.1 - KB3004361-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  54 Windows8.1 - KB3004365-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  55 Windows8.1 - KB3005607-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  56 Windows8.1 - X-KB3006226-64.msu patch status: DO NOT APPLY to THIS COMPUTER
  57 Windows8.1 - KB3008923-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  58 Windows8.1 - KB3008925-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  59 Windows8.1 - X-KB3010788-64.msu patch status: DO NOT APPLY to THIS COMPUTER
  60 Windows8.1 - KB3011780-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  61. Windows8.1 - KB3013126-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  62 Windows8.1 - KB3013455-v2-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  63. Windows8.1 - KB3014029-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  64 Windows8.1 - KB3018943-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  65 Windows8.1 - KB3019215-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  66. Windows8.1 - KB3019978-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  67 Windows8.1 - KB3020393-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  68 Windows8.1 - KB3021674-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  69 Windows8.1 - KB3021952-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  70 Windows8.1 - KB3023607-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  71. Windows8.1 - KB3036197-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  72. Windows8.1 - KB3021953-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  73. Windows8.1 - KB3022777-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  74 Windows8.1 - X-KB3023266-64.msu patch status: DO NOT APPLY to THIS COMPUTER
  75 Windows8.1 - KB3023562-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  76. Windows8.1 - KB3024663-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  77 Windows8.1 - KB3029944-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  78. Windows8.1 - KB3030377-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  79. Windows8.1 - KB3031432-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  80 Windows8.1 - KB3032323-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  81 Windows8.1 - KB3032359-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  82 Windows8.1 - KB3040335-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  83. Windows8.1 - KB3033408-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  84 Windows8.1 - KB3033889-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  85 Windows8.1 - KB3034196-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  86. Windows8.1 - KB3034344-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  87. Windows8.1 - KB3035017-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  88 Windows8.1 - KB3035034-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  89 Windows8.1 - KB3035126-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  90 Windows8.1 - X-KB3035131-64.msu patch status: DO NOT APPLY to THIS COMPUTER
  91. Windows8.1 - KB3035132-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  92 Windows8.1 - KB3037634-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  93 Windows8.1 - KB3039066-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
  94 Windows8.1 - X-KB3044132-64.msu patch status: DO NOT APPLY to THIS COMPUTER
  95 Windows8.1 - KB3046049-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER

  Thank you

  Dave

  Dave,

  It is a forum for specific consumers. You can find the Windows Server support in these forums:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer>
  

  Specific Windows Server security sub-forum:

  http://social.technet.Microsoft.com/forums/en-us/winserversecurity/threads>
  `~`

• Windows Server 2012 R2 Private File Sharing

  Hello

  I have a Windows Server 2012 R2 with experience Essentials that I use for my home.  I would like to configure the server so that my family and I can access the contents of all the job server and connect to home via Office at distance as well. How would I do that? All my computers at home running the version of windows 7 and 8 lay, so I can't use a domain.  I understand that I may access to any where, but I understand that in the installation of the role of the experience of Essentials, you must configure a domain.
  I appreciate the help and can provide all the necessary information.

  Hey Connor,

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer&filter=AllTypes&sort=lastpostdesc