Calls vcse URI

Similar Questions

• Oracle 11g mediator WebService security problem-cannot call endpoint URI "" successfully due to: javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: bad response: 401 Unauthorized

  Hi all

  I have a RS of mediator who invokes an external secure Web service. Despite I put the username and password values, I get HTTP 401 error.

  Here is my source of mp plan.  Any comment or help is appreciated.

  <? XML version = "1.0" encoding = "UTF - 8"? >

  < mediator name = "AIASystem.OSM.ProcessSalesOrderFulfillmentOSMCFSCommsWSProducer_RS" wsdlTargetNamespace =" " http://Oracle.com/ESB/namespaces/AIASystem_OSM "xmlns =" " http://xmlns.Oracle.com/SCA/1.0/mediator "> "

  < name of operation = "run" >

  <>switch

  < name = "ProcessSalesOrderFulfillmentOSMCFSCommsWSProducer.CreateOrderBySpecification - case" executionType 'direct' = > "

  < action >

  < transform >

  < name of part = "$out.» CreateOrderBySpecificationRequest ".

  function = ' xslt (xsl/ProcessSalesOrderFulfillmentEBM_To_CreateOrderBySpecification.xsl $in.). ProcessSalesOrderFulfillmentEBM) "/ >"

  < / transform >

  < assign >

  < copy value = "admin".

  ' xmlns:wsse1 = ' http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd "

  target = "$out." Header.wsse1_Security/wsse1:Security/wsse1:UsernameToken/wsse1:username"/ >

  < copy value = "Data1234".

  ' xmlns:wsse1 = ' http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd "

  target = "$out." Header.wsse1_Security/wsse1:Security/wsse1:UsernameToken/wsse1:password"/ >

  < / assign >

  < invoke reference = "ProcessSalesOrderFulfillmentOSMCFSCommsWSProducer."

  operation = "CreateOrderBySpecification" >

  < onReply >

  < transform >

  < name of part = "$out.» ProcessSalesOrderFulfillmentResponseEBM ".

  function = ' xslt (xsl/CreateOrderBySpecificationResponse_To_ProcessSalesOrderFulfillmentResponseEBM.xsl $in.). CreateOrderBySpecificationResponse) "/ >"

  < / transform >

  < response / >

  < / onReply >

  < onFault type = "InvalidOrderDataFault" >

  < transform >

  < name of part = "$out.» OrderFault ".

  function = ' xslt (xsl/InvalidOrderDataFault_To_OrderFault.xsl $in.). InvalidOrderDataFault) "/ >"

  < / transform >

  < fault type = "OrderFault" / >

  < / onFault >

  < / call >

  < / action >

  < / Body >

  < / switch >

  < / operation >

  < / Ombudsman >

  Hi all

  The problem is solved by adding the three properties below to the definition of the external service in composite.xml.

  Best regards

  Override = "may" > true

             

  Override = "may" > username

             

  Override = "may" > password

• Crossing call - 403 forbidden problem

  Hello

  We deployed the VCS control with VCS Expressway for the course of firewall and encountered a problem. It says on the status of the call VCSe, 403 forbidden

  When an external end point registered as SIP on the VCSe will call to an internal endpoint as a SIP to the VCSC.

  Here are some of the scenarios test, we have carried out and the results:

  1. check internal endpoints SIP VCSC - OK

  2 external endpoint SIP registartion to VCSe - OK

  3 internal endpoint endpoint internal SIP calls via VCSC - OK

  4. external point endpoint endpoint external SIP calls via VCSe - OK

  5 internal endpoint endpoint external SIP calls through the VCSC and VCSe - OK

  6. point endpoint endpoint internal external call SIP via VCSC and VCSe - failed (403 forbidden)

  On item 6, which is the only problem we are trying to solve.

  Which are necessary to check?

  Thank you.

  BR,

  Acevirgil Ocampo

  I recommend no doubt create a subzone for Movi, you can also control the bandwidth also. I have never save anything to the default subfield on Highway and off the record for security purposes. Movi clients enter their own subfield

  NES as well as sub-areas for other specific things.

  For security reasons, I don't like is not verification of the credentials on the highway, especially if you have an ISDN gateway or maybe control has a route on the PSTN. Fraud free of charge is not sweet.

  I always sent SSO via local vs LDAP authentication. It becomes difficult when you are unable to join the fast track to the area but still want to authenticate and verify the credentials. The trick is that you must create a local user on the highway, and then create the same identical user name and the password in active directory. Then in MSD, get these credentials by using the model configuration for the version / MOVI device.

• Issue when the external Web service call

  Hello

  I'm calling the webservice from BPEL which fails with the following error:

  Cannot call endpoint URI 'http:---' successfully due to: javax.xml.soap.SOAPException: failed to read the answer: org.xml.sax.SAXParseException: content is not allowed in the prologue.

  When I try to test the standalone version of webservice, it returns the following data-

  
  

  < assystEJB >

  < AssystUser >

  < id >

  <! [CDATA [1409]] >

  < /ID >

  < shortCode >

  <! [CDATA [TESTUSER]] >

  < / shortCode >

  < / AssystUser >

  < / assystEJB >

  
  

  What could be maybe wrong with integration?

  Pointers are appreciated!

  
  

  Thank you!

  
  

  
  

  No guys, his problem with binding HTTP adapter, when the REST service is invoked by using the HTTP adapter, it adds its own operation.

  Due to which this error is visible. I now invoke service REST of java and its working fine.

• VCS Cluster DNS problems

  Hello

  I have created a DNS SRV to configure in the FULL of the VCS Cluster domain name.

  The problem is when devices try to enroll in the VCS Cluster; I put in the endpoints, in Gatekeeper registration DNS or IP address of the DNS SRV but the always end points will never reach the cluster of VCS.

  I check the logs in DNS SRV and I don't see any request from devices.

  I think I need to create a virtual IP address with DNS with load balancing, I mean: IP/DNS (FQDN) for the Cluster with load and balance when devices trying to connect to the cluster's IP/DNS it transmits the request to an IP or host name of a host in the cluster.

  DNS cLuster

  23.1.0.201 (vcs.xxx)

  The peer of the cluster:

  23.1.0.32 (vcscontroltc.xxx) Master

  23.1.0.33 (vcscontrolvag.xxx) slave

  XXX--> field

  Is this right?

  Thanks in advance.

  Best regards.

  Hello

  then 23.1.0.201 is the IP address of your DNS server?

  How you need to configure is:

  FULL of the cluster domain name: vcscluster.domain.local

  VCS counterpart A: vcscontroltc.domain.local

  VCS counterpart B: vcscontrolvag.domain.local

  With the above assumptions, that's what you create in DNS:

  -For the FULL domain name cluster, create two A records for vcscluster.domain.local one pointing to 23.1.0.32 and the other pointing to 23.1.0.33. With that, I recommend that you enable alternate on your DNS server.

  -For each peer, create a record, so vcscontroltc.domain.local points to the points 23.1.0.32 and vcscontrolvag.domain.local to 23.0.1.33.

  -Create SRV H323 and SIP records for vcscluster.domain.local. With that, I recommend that you create two SRV records for each service, pointing A Exchange and showing a B counterpart, with a weight and priority. For example:

  _sips._tcp.vcscluster.domain.local-> vcscontroltc.domain.local, priority 1, weight 50

  _sips._tcp.vcscluster.domain.local-> vcscontrolvag.domain.local, priority 1, weight 50

  If you follow the advice above, you should be able to configure all of your interior SIP and H323 endpoints with a h.323 gatekeeper address/SIP proxy address, of vcscluster.domain.local and endpoints must enroll in one of the peers, regardless of whether endpoints supports DNS SRV.

  If the domain that you use is public, you also want to add the SRV records for that domain name. These SRV records must point to your VCS Expressway, to ensure that incoming calls from URI function as it should. For example:

  _sips._tcp.domain.local-> vcse.domain.local, priority 1, weight 100

  If you have several VCS-E you can adjust the SRV records accordingly.

  Hope this helps,

  Andreas

• Status of active 7 roles Web site with PowerShell.

  I searched for a way to monitor the site to an active role with PowerShell. I was stuck when you pull into a page request via Invoke-WebRequest and System.Net.WebClient.

  Example 1:
  $ARSURL = ""https://ars.org " "
  $Creds = get-Credential
  Invoke-WebRequest - Uri $URL - Credential $Creds
  And I get the following error: "Server error: Invoke-WebRequest.
  401-Unauthorized: access is denied due to credentials not valid. »

  Example 2:
  $webclient = new-object System.Net.WebClient
  $webclient. Credentials = new System.Net.NetworkCredential ($username, $password, $domain) object
  $webpage = $webclient. DownloadString ($url)
  And I get the following error: Exception calling 'DownloadString' with '1 ': arguments
  "The remote server returned an error: (401) unauthorized."

  Any idea on how I can connect on the site of ARS through PowerShell?

  Well - I answered a question about ARS 7 without thinking about it - I'm still not there.  This answer applies to the ARS 6.9... Can also be applied to Version 7 - if the page can be called directly.  If not, your mileage may vary.

  If you're still with me... I played with it a little too there is more to explore... but here is a style of performing the task.

  For me - a quick way to check the availability of a web site of ARS would be to remove the page and display the user ID connected on ARS service and web version + the status of the page.

  We maintain 4 distinct groups of servers ARS, and I spend the $ARSURL below three web servers ARS to check that the site is up, and he is currently pointed to the good host ARS service partner.

  $ARSURL = "myhost.myplace.com/.../About.ASPX ". $page = call-WebRequest - Uri $ARSURL -UseDefaultCredentials ($page.allelements | where {$_.tagname - eq "TBODY"}) .innertext

  Returns:

  Current user: DOMAIN\USERID Role: ActiveRoles administrator The Web Interface version: 6.9.0.5483 Administrative service: myhostinGA.myplace.com Version of Service administration: 6.9.0.5483 Ok Ok

  You can also - if you look at something in the script of automation in a status report - I'd go with the simple $page. StatusCode - or $page. StatusDescription

  the HTHML code for a good result is 200... I have only seen two codes is available or not.  If this is not the 'code' returned is 500.  If the page is building / busy - you will get a long wait and a "timeout."

  $ARSURL = "myhost.myplace.com/.../About.ASPX ". $page = call-WebRequest - Uri $ARSURL -UseDefaultCredentials $page. StatusDescription

  Returns

  Ok

• PowerShell invoke-WebRequest / invoke RestMethod error

  I'm on Windows7 Professional Service Pack 1 version and we're on Powershell 4.0

  PSVersion                      4.0                                                                                                                                                             WSManStackVersion              3.0                                                                                                                                                     SerializationVersion           1.1.0.1
  CLRVersion 4.0.30319.18063 BuildVersion 6.3.9600.16406 {1.0, 2.0, 3.0, 4.0} PSCompatibleVersions PSRemotingProtocolVersion 2.2

  Using the REST API with basic authentication, it must extract data from a breakpoint.  We finished the program against the Test UAT system and everything was working fine with Invoke-RestMethod / Invoke-WebRequest

  But while we are about to hit the final point of production with the same logic, that we keep getting below error

  Invoke RestMethod: the underlying connection was closed: an unexpected error occurred on a send.
  On line: 1 char: 1
  + Call RestMethod - Uri "https://us-app.justride.com/MonitorMe/1.0/datamart/ticke ...".
  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  + CategoryInfo: InvalidOperation: (System.Net.HttpWebRequest:HttpWebRequest) [invoking-RestMethod], WebException
  + FullyQualifiedErrorId: WebCmdletWebResponseException, Microsoft.PowerShell.Commands.InvokeRestMethodCommand

  Everything works fine if we use the endpoint UAT test
  https://uat.justride.systems/MonitorMe/1.0/datamart/tickets.csv- but change us production URL https://us-app.justride.com/MonitorMe/1.0/datamart/tickets.csv

  It gives an error. I can't connect to the production URL in internet explore with authentication. Don't know why it doesn't work with powershell commands

  Appreciate any help/input as we are about to go live with production app

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• The asynchronous BPEL using SoapUI5.2.1 test error.

  Hello

  I followed all the steps mentioned in

  Unit Testing asynchronous BPEL process using soapUI

  But I am getting error in the EM console below

  Anomaly of the non-recoverable system:

  " < bpelFault > < faultType > 0 < / faultType > < remoteFault xmlns =" http://schemas.Oracle.com/BPEL/extension "> < a name ="summary"part > < summary > oracle.fabric.common.FabricInvocationException: cannot call endpoint URI" http://localhost:9898/BPELProcess1CallbackBinding/processResponse "successfully due to: javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect < / summary > < / piece > < part name ="details"> < detail > impossible to invoke endpoint URI" http://localhost:9898/BPELProcess1CallbackBinding/processResponse "successfully due to" ". : javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect < / detail > < / piece > < part name = "code" > < null code > < / code > < / piece > < / remoteFault > < / bpelFault >

  
  

  Can someone help me please. I do this first time and don't know where to look

  
  

  Thanks in advance,

  Shub
  

  In SOAPUI, what window you run the test?

  Make sure that you run the unit test of the window "TestCase1. Figure 14, the article quotes of Ref.

  Do not run any Test steps-> Request1 process window.

• SOA beneficiarymanagerapproval reminder composite service failing.

  Hello everyone

  Hope this mail finds everyone in good condition. My question is about BeneficiaryManagerApproval, we use this composite for approval to the manager level. So right now we are testing this new IOM https url, we have implemented everything you need - deploy the composite configuration settings, set discovered as soapuri, oimfrontenduri, and other things. Now, when a user get a request for a resource, the request goes from the approver and he could see, approve. But after approval in the reminder service, we see some difficulties. We checked the Forum and found some errors as shown-

  The journal of the soa errors are as follows: -.

  Caused by: java.net.ConnectException: tried them all: '1' address, but not able to connect via HTTP to the server: ' hostname, port: '80 ".

  at weblogic.net.http.HttpClient.openServer(HttpClient.java:342)

  at weblogic.net.http.HttpClient.openServer(HttpClient.java:435)

  at weblogic.net.http.HttpClient.New(HttpClient.java:261)

  at weblogic.net.http.HttpURLConnection.connect(HttpURLConnection.java:218)

  < WARNING > < oracle.integration.platform.blocks.soap > < BEA-000000 > < could not invoke endpoint URI " " https://host/WorkflowService/CallbackService "successfully due to: cannot call endpoint URI" https://host/WorkflowService/CallbackService "successfully due to: javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: bad response: 404 not found from url" https://host/WorkflowService/CallbackService " >

  < error > < oracle.wsm.resources.enforcement > < WSM-07501 > < failure in Oracle WSM Agent processRequest, category = security, function = agent.function.client = default, composite application = BeneficiaryManagerApproval, modelObj = CallbackService_2, political = null, policyVersion = null, assertionName = null.oracle.wsm.common.sdk.WSMException: no protocol: localhost

  at oracle.wsm.security.policy.scenario.executor.SecurityScenarioExecutor.initialize(SecurityScenarioExecutor.java:476)

  at oracle.wsm.security.policy.scenario.executor.SecurityScenarioExecutor.init(SecurityScenarioExecutor.java:347)

  at oracle.wsm.security.policy.scenario.executor.Wss11SamlWithCertsScenarioExecutor.init(Wss11SamlWithCertsScenarioExecutor.java:76)

  at oracle.wsm.policyengine.impl.runtime.WSPolicyRuntimeExecutor.populateAssertionExecutors(WSPolicyRuntimeExecutor.java:259)

  at oracle.wsm.policyengine.impl.runtime.WSPolicyRuntimeExecutor.populateAssertionExecutors(WSPolicyRuntimeExecutor.java:282)

  Caused by: oracle.wsm.security.SecurityException: no protocol: localhost

  at oracle.wsm.security.identity.WSMIdentityReaderValidator.getHostname(WSMIdentityReaderValidator.java:206)

  at oracle.wsm.security.identity.WSMIdentityReaderValidator.getIdentity(WSMIdentityReaderValidator.java:149)

  Caused by: java.net.MalformedURLException: no protocol: localhost

  at java.net.URL. < init > (URL.java:585)

  at java.net.URL. < init > (URL.java:482)

  at java.net.URL. < init > (URL.java:431)

  < WARNING > < oracle.integration.platform.blocks.soap > < BEA-000000 > < could not successfully invoke the endpoint URI 'localhost' due to: cannot call endpoint URI 'localhost' successfully due to: oracle.fabric.common.PolicyEnforcementException: no protocol: localhost >

  < 10 February 2015 10:33:48 CST > < error > <oracle.soa.bpel.engine.ws> < BEA-000000 > < had FabricInvocationException java.net.MalformedURLException: no protocol: localhost

  After searching a lot on the internet, I found things as to check if soapuri is correct - I checked these settings, they are correct. This what should I do to remove this exception, why this recall fails and demand by getting not completed? Do I need to add SSL certificate in the keystore because it's SSL communications. Please help me because this problem becomes serious, thank you in advance for the help and suggestions.

  Thanking you once again.

  the problem is solved by adding modules of weblogic in file oim.config servers in OSH. Thanks to you all.

• PowerShell for download 2014 VMworld sessions

  Damian Karlson created a script to download videos from vmworld 2013 (including PowerCLI ones of course) with powershell.

  Did someone come with a modified version for 2014 yet?

  This is the first view

  Automate all VMworld U.S. 2013 Session downloads

  Thank you!

  The captcha is not really a problem, I went.

  But when you get to the download page, you will still fall on an application.

  The days of simple URLs are gone I'm afraid

  For what it's worth, this will put you on the download page.

  # Logon

  $vmworld = "http://www.vmworld.com/login.jspa".

  $site = Invoke-WebRequest - Uri $vmworld - SessionVariable vmw

  $logon = $site. Forms ["loginform01"]

  $logon. Fields ['username01'] = $user

  $logon. Fields ['password01'] = $pswd

  $result1 = call-WebRequest - Uri $vmworld - WebSession $vmw - Post method - body $logon. Fields

  if($result1.) StatusCode - eq 200) {}

  $vmworldSessions = "http://www.vmworld.com/community/sessions/2014/".

  $sessions = Invoke-WebRequest - Uri $vmworldSessions - SessionVariable vmw

  $captchaExpr = $sessions. ParsedHtml.body.outerText |

  Select-String - Pattern "which is (? ). [\d\s+]+)?" |

  Select the games - ExpandProperty | %{$_. Groups ["short"]. Value}

  $captchaResult = expression to call $captchaExpr

  $sessionsForm = $sessions. Forms of [""]

  $sessionsForm.Fields ["input_firstName"] = $firstName

  $sessionsForm.Fields ["input_lastName"] = $lastName

  $sessionsForm.Fields ["email"] = $email

  $sessionsForm.Fields ["BotBootInput"] = $captchaResult

  $result2 = call-WebRequest - Uri $vmworldSessions - WebSession $vmw - Post method - $sessionsForm.Fields of body

  if($result2.) StatusCode - eq 200) {}

  $uri = "http://www.webcastregister2014.com/vmware/index.php".

  $body = "input_firstname = $firstName & input_lastName = $lastName & input_email = $email & post = post & submit = Submit.

  $result3 = call-WebRequest - Uri $uri - WebSession $vmw - Post method - body $body

  if($result3.) StatusCode - eq 200) {}

  $catalogUri = $result3. BaseResponse.ResponseUri.AbsoluteUri

  $result4 = call-WebRequest - Uri $catalogUri - WebSession $vmw - Get method

  }

  }

  }

• Workflow of vCO of query using the REST API in PowerShell

  Hello

  I am interrogating a workflow vCO by name using the REST API of PowerShell based on this article:

  http://www.vcoteam.info/articles/learn-VCO/268-how-to-use-the-rest-API-to-start-a-workflow.html

  $username = "XXXXXX".

  $upassword = "XXXXXX".

  $auth = $username + ':' + $upassword

  $Encoded = [System.Text.Encoding]: UTF8. GetBytes ($auth)

  $EncodedPassword = [System.Convert]: ToBase64String ($Encoded)

  $headers = @{' authorization '=' basic $($EncodedPassword) ' ;}}

  $body = "<-xmlns = execution context" ". ' http://www.VMware.com/VCO ' > < / execution context > '

  #query for workflow named "donothing".

  Invoke-RestMethod-uri https://XXXX:8281/api/flow /? conditions = name = donothing -Headers $headers - body $body - ContentType "application/xml" - Get method

  Invoke RestMethod: failed to send a content-body with this type of verb.

  On line: 1 char: 1

  + Call-RestMethod-uri https://XXXX:8281/api/flow /? conditions = name = donoth ...

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: NotSpecified: (:)) [invoking-RestMethod], ProtocolViolationException)

  + FullyQualifiedErrorId: System.Net.ProtocolViolationException, Microsoft.PowerShell.Commands.InvokeRestMethodCommand

  The request succeeds by using the customer REMAINS on Firefox, but I can't make it work on PowerShell. (NOTE: PowerShell workflow execution works very well)

  Any help is appreciated.

  Thank you

  Juan.

  OK, I managed to do work by removing

  [System.Net.ServicePointManager]: ServerCertificateValidationCallback = {$true}

  And add this at the beginning of the script

  "Add-type @ '.

  using System.Net;

  using System.Security.Cryptography.X509Certificates;

  public class TrustAllCertsPolicy: {ICertificatePolicy

  public bool CheckValidationResult)

  ServicePoint srvPoint, X509Certificate certificate,

  WebRequest request, int certificateProblem) {}

  Returns true;

  }

  }

  "@

  [System.Net.ServicePointManager]: CertificatePolicy = New-Object TrustAllCertsPolicy

  Now I can use the GET method:

  $ret = Invoke-WebRequest - uri $URL - Headers $headers - ContentType "application/xml" - Get method

  I spent to Invoke-WebRequest so I can get the return of application Web.

  Juan.

• Motorway E v8.5.1 / / URI Source of change for a call out

  I'm changing the source URI for the calls from our internal network to the internet.  We have an internal area that is not routable on the internet and I would like to change for the routable domain.

  Example:

  Internal domain = int.company.com

  External domain = societe.com

  I tried to use a CPL script on highway E (Version 8.5.1) to achieve, but it does not work for some reason any.  Here's the last CPL I am using:

  
  
  "xmlns:TAA ="http://www.tandberg.net/cpl-extensions"
  "" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance"
  xsi: schemaLocation = "urn: ietf:params:xml:ns:cpl cpl.xsd" >
        
          
            
               "[email protected] / * / ' >
                
              
            
          
        
  

  Someone has any ideas why this wouldn't work?

  Thanks in advance.

  Brandon

  Take a look at the example in this thread for reference, ask-expert-cisco-telepresence-company, and CPL reference material in the Guide Admin Expressway.

  You must change your origin depending on your internal domain, rather than match any incoming/outgoing call, see below.

  [email protected]/*  */" destination=".*">

  Everything else is fine, I tested it with a codec here using your example domains and the called endpoint has shown the correct source address. You have a cpl in place to change the external domain in-house for incoming calls from outside your organization to be able to find the domain that is used for your registered endpoints? Joint a CPL example is based on one that you posted where it will change the outgoing calls to use the external domain and use the internal domain, incoming calls. In addition, for use later, just say "it doesn't work" provides no information of what's going on. Sometimes you can get lucky and see the issue, but other times that we have more detailed information or see what is happening in order to help better understand where is the problem.

• Change the Source URI for outbound calls using VCS Expressway X8.2

  Hi all

  I would like a little help on a CPL script, that I'm working on. I lived all the examples of community support and I am always sick.

  We run on VCS X8.2.  What I've read, VCS X8.1 has introduced a few new CPL capabilities, including the node location CPL supports rewriting the regex-based source alias.  I would like to take advantage of this new feature. I'm looking for a tutorial or a direction more advanced examples using this new capability.

  Here's my question:

  I have an internal domain "CompanyA.local" and I have a public domain "Entreprisea.com". «My Cisco video endpoints register control VCS with a SIP URI of "[email protected] / * / .local'.»

  Receive calls from outside help "[email protected] / * / com" and the rules of research, I route calls properly internally.

  When I dial an external company, my endpoint is showing a video SIP URI of "[email protected] / * / .local"

  Of course, this isn't a SIP URI dial-able and should be changed to "[email protected] / * / .com'." "

  I know that this can be achieved using CPL, but I have not used this feature before.
  Any help would be appreciated.

  Please suggest an example script CPL I can review.

  I would use a Regex to cover all of my similar to the following endpoints:

  source-url-to-message-regex = "(.*) ' @CompanyA.local '"
  source-url-to-message-replace = "------[email protected] / * /"

  Thanks in advance for any help.

  oooooo, that answer above gave me the answer I was looking for. It does not work! It seems that the syntax for the xml file has changed from pre x 8 and x 8. Looks like I've been using the incorrect syntax. I was missing the AVA: in the clause to the proxy, which is my version of rule switch not working. Still don't know why the address switch did not work, but I prefer the rule-switch anyway, so no big loss for me.

  I've tested, and it is fully functional on my vm VCS x8.2 running lab

  
  
  "xmlns:TAA ="http://www.tandberg.net/cpl-extensions"
  "" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance"
  xsi: schemaLocation = "urn: ietf:params:xml:ns:cpl cpl.xsd" >
         
           
             
               "[email protected] / * / ' >
                 
               
             
           
         
  

• SIP URI B2B calls via CUCM and Highway

  Hi all

  Cannot find out how to configure the SIP URI from SX codecs, recorded calls on CUCM.

  I CUCM and IM & P 10.5.1 a pair of X8.5.2 expressway with two areas of course - for B2B calls, and the external jabber.

  I want to make calls of SX-codecs outside via SIP, by using the URI field, for example, [email protected] / * / or [email protected] / * /. How can I configure that?

  I already have the routing model, which is the SIP Trunk for Exp - C, for H323 calls by ip address. Is it possible to make a routing model to call the SIP URI?

  You can see my deployment in this image.

  fghj.PNG

  

  Best wishes

  Igor

  Hi Igor

  These guides will help you resolve your issues:

  http://www.Cisco.com/c/dam/en/us/TD/docs/voice_ip_comm/Expressway/config_guide/x8-5/Cisco-Expressway-SIP-trunk-to-unified-cm-deployment-guide-CUCM-8-9-10-and-x8-5.PDF

  https://supportforums.Cisco.com/ru/video/12362936

  BR Oleksandr

• Change caller id / name of the SIP URI of VCS calls

  Hello

  I have clusted CUCM 9.1 with a SIP to a VCS - C trunk.  When making calls, the calls show a caller id of [email protected] / * / address, for example [email protected] / * /.  I have a configuration URI directory on the phone that generates the call, but now it shows the URI.  Incoming calls from SIP URI properly.

  Thank you

  Hello

  On the trunk SIP for VCS, under outgoing calls, there should be an adjustment: vocation and connected part format, change it to URI deliver only partially connected. Also, under the profile SIP assigned to the SIP trunk to VCS, there should be a setting use entirely field in queries, check this box. The SIP profile should also be attributed to the device SIP calls.

  HTH, if yes, please rate.