"Camera connection error" on windows vista

Similar Questions

• Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.

  Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.  I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return

  Hello

  1. when exactly you get this error message?

  2 are you able to boot into the office after getting this error on blue screen?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: If the problem persists, then try to run the Startup Repair tool.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Hope this information is useful.

• Error 1720 windows vista, try to install to my MiFi2200 VZAccess Manager

  Error 1720 windows vista, trying to install VZAccess for my MiFi2200.Is Manager it a vista problem, cannot even locate windows install for Vista, where he's spent all day on this MiFi and Vista error 1720, it sucks

  http://support.vzw.com/CLC/

  First thing to do is to contact the Support of Verizon at the link above.

  See you soon. Mick Murphy - Microsoft partner

• I can't install (error says Windows Vista not supported (LR6), I use Windows 7 SP1 worms. 6.1 What is the problem?)

  I can't install (error says Windows Vista not supported (LR6), I use Windows 7 SP1 worms. 6.1 What is the problem?)

  About Vista, but is not https://forums.adobe.com/thread/1836232

• Cannot install LifeCam Cinema "Setup can not continue" error on Windows Vista

  Original title: I can not install Lifecam cinema on Vista Business.  Installation dies and points to kb/935961.  I followed all the recommendations in there and still no luck. Help!

  LifeCam Cinema just bought.  I have tried to install from DVD (version 3.5 installation) as well as downloaded 3.6 install from the Microsoft Web site.  Installation starts, but then fails with an error indicating that the installer cannot continue, look at support.microsoft.com/kb/935961.   I went through all the methods in this kb, nothing helps.   I'm on vista Business, SP2 and have kept with Windows updates.   I tried the end of update/install .net framework 4.0 and that did not help either.   I have NOT yet attempted to plug the camera into the USB slot at this point.

  Help!

  Hello

  1. What is the brand and model of the computer?

  2. What is the security software installed on the computer?

  3. have you made changes on the computer recently?

  4. are you able to install other programs and applications?

  5. What are the steps you tried?

  6. What is the exact error message when installation fails?

  Method 1.

  I also suggest you run the fix it tool for the link.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2.

  Resolve the error "Setup cannot continue" when you install the LifeCam software

  http://support.Microsoft.com/kb/973297

   

  Note:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must activate it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let me know if it worked.

• Help with error message: "Windows Vista Home Premium product key you typed in is invalid for activation.

  Original title: help with error message... Please...!

  I use a desktop PC of HP Pavilion a6202.uk with Windows Vista Home Premium & Microsoft Office 2003.  When I am back from vacation & turned on my PC, my password was OK, but rather to raise Windows, I received the following message: "Windows Vista Home Premium product key you typed in is invalid for activation.  He then listed the following options: "access your computer with reduced functionality (this will allow you to buy a product online key)" or "Type a different product key" or "contact HP to help solve this problem."

  I have no idea what a product key is and don't have anything either in the type comes to connect as usual.  I can't access anything to be same to reduced functionality.  I can not type in a new product key because I did not.  I can not contact HP - phone number does not... !!

  I'm quite desperate, I travel docs to print and e-mail to answer and I don't have any idea what is happening.  Please can someone help with this not very IT clued-up DTP...!

  Moved from Vista programs Forum.

  You should have a sticker with the product key on your computer, on the bottom, or under the battery cover.  I try to type this key in and see if it accepts it.  If this isn't the case, you might not have an authentic version of Windows installed.

• Error updating Windows Vista 80070641

  Hello

  I have a number of pending updates to apply - but they fail to install with error code 80070641.
  I tried a number of recommended fixes on this but nothing has worked!
  Help, please.
  Thank you

  Well... I have a teenage son - it is possible (and even likely) that he run a third-party cleaning or the registry cleaner at some point in the past. Nothing is on the system now so... like that or System Mechanic.

  Graham,

  Tell your son to read http://www.edbott.com/weblog/archives/000643.html>

  and

  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx>

  and also

  http://Forum.Piriform.com/index.php?showtopic=25513>

  http://support.Microsoft.com/kb/2563254>

  `~`

  I /quote/ Ken Blake, Microsoft MVP - a regular contributor here:

  Registry cleaning programs are all snake oil. Cleaning of the

  registration is not necessary and is dangerous. Let alone register and

  do not use any registry cleaner. Despite what many people think, and

  What software record cleaning suppliers are trying to convince you,

  have unused registry entries is not really make you hurt.

  The risk of a serious problem caused by a registry cleaner by mistake

  delete an entry you need is much greater than any potential benefit

  It can have.

  Let me stress that neither me nor anyone else who warns the

  use of registry cleaners never said that they always cause

  problems. If they have always caused problems, they would disappear from

  the market almost immediately. Many people have used a registry

  cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it

  the risk of having a problem. And since there is no

  benefits of using a registry cleaner, running that risk is a very bad

  good deal.

  /unquote

  `~`

  0 x 80070641 means ERROR_INSTALL_SERVICE_FAILURE - the Windows Installer Service could not be accessed. This can occur if Windows Installer is not correctly installed

  To check if these steps solve the problem, try the following:

  Go to Start > run > type services.msc > OK. The Services window will open, scroll down to Windows Installer, and double-click it. The Properties window opens, in the drop-down list (startup type), select 'Automatic' > OK and close windows.

  Restart the PC, and I hope it will work for you.

  Try to visit http://www.microsoft.com/DOWNLOADS/details.aspx?FamilyID=5a58b56f-60b6-4412-95b9-54d056d6f9f4&displaylang=en> and download Windows Installer for your version of Windows.

  Once downloaded, double click on it and let it install. After the reboot, check the settings above.

  To troubleshoot issues that may prevent a program installed correctly on a Windows Vista-based computer, follow this link: http://support.microsoft.com/kb/931361>

  I suggest you follow the steps in the link below and check if it helps:

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018/en-us>

  `~`

  The current time and the date now in Baja California, Mexico

  16:10

  Tuesday, November 5, 2013

  
  Standard time - 0800 UTC
  UTC/GMT is 00: 10 on Wednesday, November 6, 2013
              
  Current weather conditions in San Felipe

  Sunny23 ° C / 73 ° F

• Errors on Windows Vista KB2470478 ESENT

  I am running Windows VISTA Ultimate SP2.  I've had this laptop for about 4 years and have upgraded memory and drives without incident selection until I recently updated to a new 1 TB of HARD drive.  I now receive errors of ESENT this update of Windows and all programs that through this link are broken.  This research I found this all traces to have need KB2470478 FIX for the HARD drive is new and uses the Advanced Format.  However, I can not install the PATCH because Windows Installer now receives an error 0xc8000222.  This seems to be an error of round robin in this Windows Installer needs to Windows Update which needs ESENT, but can't use it because the new hard drive is an advanced Format and now requires the FIX...

  How can I get this fix installed without losing everything from the past month?

  Reformatting or reinstalling is not an acceptable answer since this is specifically related to the use of the hard drive again.

  Here are the steps I used to solve this problem.

  First of all, I found that there was a more recent patch available

  http://support.Microsoft.com/kb/2553708

  1. download the hotfix and copied to a USB key and stop the machine.
   
  2. change drive hard outside in the original and kick up.  Connected and installed the fix. (Must restart)

  3. after the restart, reconnected and copied the esent.dll (6.0.6002.22531) of C:\windows\system32 on the USB key and stop.
   
  4 has changed the hard drive to the new and booted up.  Connected and started an elevated command prompt (start in the C:\windows\system32 directory).
   
  5 type the following commands, where user_name is my administrator account on the system:
   
  takeown /f esent.dll
   
  ICACLS esent.dll/Grant UserName:F
   
  ESENT.old esent.dll Ren
   
  6 copied the esent.dll from the USB key in the system32 directory and restarted.
   
  7 connected and successfully launched the fix.  Restarted after fix and machine booted up without error and I was able to successfully launch Windows Update and application log is error-free.

• Need drivers for camera binoculars Bushnell running Windows Vista

  Original title: I have a Bushnell Binochular camera and need me drivers to turn on my pc to connect to the camera, my operaring system is windows vista. Can someone help me with this. Thank you

  I have a Bushnell binochular camera and need me drivers to turn on my pc to connect. My operating system is windows vista. Can someone help me with this?

  You must contact Bushnell to get the drivers you need.  Microsoft didn't create or write drivers, the hardware manufacturer.

• After getting a fatal error in Windows Vista, all my photos have seemed to disappear. How to make a comeback?

  How to restore after re activation?

  Hello! I got a fatal error that I turned on my pc and when I clicked to repair the problem asked re activate my internet connection and my widows vista business. However when I did it seems to have removed all my previous files, photo of the lot! Please can someone help me and tell me how to restore items it? Thank you!! Alpz

  Hello

  More information on the "Repair" process is necessary.

  What exactly did you do and how long did take?

  It sounds as if you have reinstalled the operating system if you reactivate your Vista Business Edition and all your files have disappeard.

  Read this information if the operating system has been reinstalled.

  When you reinstall the operating system you wipe the hard drive.

  If Vista has been reinstalled:

  Look for a folder windows.old

  "How to restore your personal files after performing an installation of Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/932912

  And you can try this free program to try to recover data lost, etc.:

  http://www.Piriform.com/Recuva

  Other meanings, you will need to contact companies for recovery of data, which are very expensive.

  See you soon.

• Problem with internet connection 64-bit Windows Vista, unexplained intermittent failure.

  original title: PROBLEM CONNECTING WINDOWS VISTA 64 BIT INTERNET - UNEXPLAINED INTERMITTENT OUTAGES

  On HP a6542p PC with factory installed Windows Vista (64-bit), Vista operating system program does not take account of Internet broadband, which, in reality, a good connection.  for the first 2 years of operation, the PC internet connection worked well, but a year ago, he started this OFF intermittent / WE internet problem.  SOMETIMES, I can manage to temporarily restore the internet after running randomly across the machine diagnostic & installation programs available to the home screen, OR SOMETIMES also after running REGEDIT in the start (search) bar and watching the TCP/IP settings (do not change them, just watch), but the internet connection drops again after the machine is idle for a few minutes.  I get very tired of the exercise Dog & Pony to run through the different random procedures & hoping that something will work.  I tried the fix from Microsoft using a flashdrive D/L from the Windows site to my XP machine and tried a few manual corrections proposed on various websites, but nothing seems to work.  I have no HP manufacturer disk to reload the Vista operating system.  The connection is good, the cable is good, but Vista gives me contradictory information about the diagnosis, such as ERROR 815, and he tells me also a cable is disconnected (not true, the cable is plugged & good & works very well when the Vista connection is restored), while another diagnostic message indicates the internet connection is good, at the same time other messages say is not.   What can I do to fix this problem in Vista?  Personal e-mail is: * address email is removed from the privacy * -I will check that URL of Web site for the possible answer.    Thanks in advance.

  Imrand - Thanks for the tip, I tried it & it didn't work.  However, I found an update of the HP driver for the network card Realtek in my machine, & after d/l this new driver, the problem seems to be fixed.  The Web connection is still good after several cycles of closing & reboot.  I'm not sure, because with this HP Vista PC, I can never be sure of anything, but I think the problem might be due to the rotating system off the NETWORK adapter in sleep mode, & so not put on when waking up.  Diagnostics messages confused and contradictory pages of different screen Windows were of NO use, it looks like the internet connection was good (which it was), while the other would be at the same time say there is no connection due to the disconnection of the cable, while the other at the same time say that the DNS server broadband couldn't recognize my internet query.  Total BS of Vista, which has compounded the problem than he was.  I only am not surprised Microsoft abandoned the Vista operating system so fast, so many other users of Vista have similar internet connection problems.  The user friendly and very stable XP operating system I have on an old PC of Insignia is my favorite.  Microsoft had to quit with it, IMO.

  Thanks for your help, Cimarron

• Recent problem that the Autoplay menu does not appear when I plug my digital cameras and devices on Windows Vista

  Recently, I had a problem in that, plugged in my camera and also my phone options auto run does not come up as they used to do.

  The cameras appear under my computer and in Device Manager but not under "Devices that you connect to your computer will be listed here" appear in the automatic game options and this area is totally blank.

  I also checked the box "Use AutoPlay for all media and devices to" check in the auto play options.  CD and USB sticks work very well.

  I have Windows Vista.  I read that Microsoft has sent a security update patch to stop the AutoRun works on Windows Vista.  I tried to turn it around by using their dose, but it doesn't seem to help.

  Any ideas anyone?

  Hi - my problem is now solved.

  Not long after reading the post above the laptop crashed and had to have a replacement hard drive.

  I just got the laptop PC repair workshop, and although there are still a lot of updates to download, I plugged the camera the hurrah the AutoPlay menu appeared.

  Obviously there is something fundamentally wrong with the laptop, but it will be interesting to see if AjutoPlay still works when all the Microsoft updates have been resettled.

  Thanks a lot for your help.

• error on windows vista \Device\Harddisk2\DR2

  I keep coming up with the error for many programs, I try to run, some wont even load due to this no matter how many times I click on try again or click on continue he keeps coming up with this error.

  Please find a solution to what its stopped me using several programs properly and caused my hardrive go bluescreen and go in a physical memory dump.

  Hello

  ·         When you get this error message?

  ·         What changes have been made to your computer before the problem?

  Method 1:

  Try to run the check disk for errors and check if it helps:

  Check your hard drive for errors

   http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Method 2:

  Change the assignment of drive letter for the removable a drive letter other than C.

  To change drive letter assignments in Windows vista, follow these steps:

  (a) connect to the computer as an administrator.

  (b) insert a disk in the removable drive.

  (c) click Start, right-click computer and then click on manage.

  (d) click on disk management.

  (e) right click on the partition, logical drive or volume that you want to change and then click on change drive letter and paths.

  (f) click on the removable drive, click it, click on change, click the drive letter that you want to use, and then click OK.

  Read more here:

  Change, add, or remove a drive letter
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Hope this helps,

• The formidable problem of Connectivity Bluetooth in Windows Vista continues to baffle. Here's my story and the cry for help!

  System:

  Dell XPS M1530 - Windows Vista HP SP1

  Device Manager:

  Bluetooth radios
  -Dell Truemobile 355 Bluetooth + EDR (driver 6.0.6001.18064, 21.06.2006)
  -Microsoft Bluetooth enumerator (driver 6.0.6001.18064, 21.06.2006)

  Other devices
  -Device Bluetooth device
  -Device Bluetooth device
  -Device Bluetooth device
  -Device Bluetooth device
  -Device Bluetooth device

  Additional information:

  There are NO NOKIA SOFTWARE currently INSTALLED.  I had the version more up-to-date of Nokia PC Suite installed earlier today, but I uninstalled it to rule out it as the cause of the problem.

  Objective:

  To be able to connect my phone Nokia E50 in my XPS and synchronize etc...  It's a thing that I was able to do in the past (not sure how long ago), but now I'm having these problems.

  Problem:

  When I turn on my Bluetooth connection it starts to search for drivers of devices at random (see above).  He is unable to find the drivers for them and Windows problem reports & Solutions (WPRS) says that there is a problem with my Nokia cell phone.  However, as above, I uninstalled Nokia PC Suite and Nokia ALL entries from the list of programs in the control panel.

  I'm also be prompted by WPRS to consult the Broadcom website for driver updated also, but surprise surprise their Bluetooth software upgrades are not available now.

  I spent almost 3 hours to try to rectify this problem until today and I have tried at least four different solutions of various Web site, including this one.  From what I've read, it's an extremely widespread problem that seems to have no infallible solution, which is a bit ridiculous because it is only a problem of Bluetooth connection!

  So my questions are:

  1. Why is it I'm being invited to check the Nokia website when all of Nokia is uninstalled?
  2. Why is it I'm being invited to visit the site of Broadcom also?
  3. why my system tries to install five devices that do not exist whenever I power on Bluetooth?

  I suspect that it is a problem of Microsoft or Dell but don't seem to be able to solve.  All my drivers in Device Manager are up to date (at least I said that when I try to update, although I'd like to think that there has been updates since 2006?) so unless there is some hidden updates on the wwweb somewhere that I can't find so I'm puzzled.

  I know that people are probably sick of hearing about this problem, but it has not disappeared, so he needs to take care.

  Thank you for reading!  Signing the Ireland...

  Ronan:

  Hello, Ronan,.

  Thank you for visiting the website of Microsoft Windows Vista Community.

  I would like to respond to three questions of your message:

  1. Why is it I'm being invited to check the Nokia website when all of Nokia is uninstalled?

  It is possible that your software Nokia my not completely uninstalled. There may be services or registry information left behind. You can download the following utility and uninstall completely.

  Download the Windows Installer CleanUp tool to uninstall any remaining Nokia information.

  Installation of the Windows Installer CleanUp tool:

  Find the tool here: http://support.microsoft.com/kb/290301

  When you install the tool, you must be logged on as administrator of the machine.

  After you download the ms1cuu2.exe on your desktop, you will need to right-click on it and select "Run as Administrator" and you will need run the Windows Installer CleanUp utility from the start menu. It will be under programs and will be called "Windows Installer Clean Up.

  2. Why is it I'm being invited to visit the site of Broadcom also?

  Because Dell uses Broadcom, more than likely, you will be redirected there after installed Dell printer the standard utilities trying to solve this error message Bluetooth that happens.

  3. why my system tries to install five devices that do not exist whenever I power on Bluetooth?

  After you uninstall the Nokia Software completely, see if that solves the problem of device.

  I would also recommend, contact your provider of cellular service to support more.

  Here is more information on troubleshooting Microsoft bluetooth connectivity problems: http://windowshelp.microsoft.com/Windows/en-US/Help/11a74104-645d-40d4-b933-bde5d15537bb1033.mspx

  Please let us know if it works for you.

  Theresa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to install Flash or Acrobat Reader, nothing happens, no errors on windows vista sp2

  I have two Dell laptops, one was my mother and the other is mine (Inspiron 15xx and 1750).  I deleted down two laptops using the restore factory images stored on computers.  I want that they fully working before I sell them or given the to a friend or relative.

  When I try to install Flash or Acrobat Reader, I first download and then run the installation program and then nothing happens, no screen of welcome, no please, wait or loading... dialog box, no error message, just absolutely nothing.

  I am a programmer with a degree in computer programming and I built my own computer, reinstalled, installed drivers, software and firmware, so I thought I should be able to solve this problem, but as the still I had no luck so far.

  I have:

  (1) installed all Windows updates

  (2) installed Windows Vista SP2

  (3) installed the updates of BIOS, drivers, software and firmware from Dell.

  (4) installed the last IE v7 to v9 present. (This fixes my problem to Skype "Sorry, we couldn't connect to Skype")

  (5) installed the latest Microsoft Visual C++ 2012 Redistribution.

  (6) searched on the internet for the solution and followed a few steps that I thought looked promising but no solution so far.

  (7) I checked the logs install but they are empty either, I can't find the directory, or there is no log file here.

  For me the main problem is that I don't get any information, i.e. None of the error messages or logs, which makes it very difficult to seek solutions that are specific to my problems.  Anyone who can help me to identify the problem, it is find a mistake or a newspaper that shows where the problem is, would help me tremendously and close me solve the problem.

  I think I need to install some type of update will miraculously fix the problem, as point 4 above, where IE upgrade to v 9 fixed my problem of Skype, but I have no idea what it would be.

  Thank you in advance for all help me and I hope that this forum will help others.

  Thanks Abzyx.

  I use Firefox all the time and I would have downloaded Flash while in Firefox, but the download never worked.  The only solution that worked for me was what I mentioned in the post above (message number 7).

  Yes your right, I did not mention on the PDF reader, thanks for pointing that out.

  I noticed that you mentioned using another like Sumatra PDF reader, so I had to look that.

  I found that Nitro and Sumatra where 2 alternatives to Adobe Acrobat Reader.  Nitro looked like a more advanced system, but it does not work.  Sumatra seems simpler, but as PDF readers go, if I can read a PDF file, which is fine for me, Sumatra has worked well.

  Research on the internet I found a video that has been really good for my problem.  I'm looking for 'acrobat reader vista' and the 4 down link was a youtube video called "Install Adobe Reader in Windows Vista" on the page: https://www.youtube.com/watch?v=1wAki19nDSY

  After you follow the instructions in the video, I am Acrobat works.

  Basically, I went to the URL of the video: ftp://ftp.adobe.com/pub/adobe/reader/win/

  Then try to find the most recent version, so I tried 11.0.16, but this does not work, the video shows using 10.0.0, so I thought I would try to use 11.0.0 and if this does not work, try the version 10.0.0.  I found version 11.0.0 worked for me then once installed, I checked for update in Acrobat Reader and now I 11.0.8 and this seems to be the best version of work for my computer.

  Thank you again Abzyx and everyone who help me by posting your comments.  By studying what has been mentioned, internet search and try different installers and more clear, I found what I was looking for.