error on windows vista \Device\Harddisk2\DR2

Similar Questions

• Explorer.EXE - no disc: there is no disc in the drive. Insert a disk in drive \Device\Harddisk2\DR2

  Original title: \Device\Harddisk2\DR2

  I get this popup of the application:

  Explorer.EXE - no disc: there is no disc in the drive. Insert a disk in drive \Device\Harddisk2\DR2

  How can I get rid of it? I don't mean to access drive... it just popup as soon as I open my computer.

  Thank you

  John

  Hello

  ·         Do you get this error message when you restart computer?

  ·         You will remember to do recent changes on the computer before this problem?

  ·         You are able to open Internet Explorer?

  ·         You have a hard drive connected to the computer?

  I suggest to restart the computer in safe mode and let us know the status of the issue. Follow the steps in the link to start the computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Please see the link: how to fix explorer.exe - error disc no.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/how-to-fix-explorerexe-no-disk-error/76ef7ebd-5FCD-4c6e-9f33-50b6aae4a4e9

  You can also have a look at the following Suggestions for a question on the help forums:

  http://support.Microsoft.com/kb/555375

• Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.

  Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.  I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return

  Hello

  1. when exactly you get this error message?

  2 are you able to boot into the office after getting this error on blue screen?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: If the problem persists, then try to run the Startup Repair tool.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Hope this information is useful.

• Error 1720 windows vista, try to install to my MiFi2200 VZAccess Manager

  Error 1720 windows vista, trying to install VZAccess for my MiFi2200.Is Manager it a vista problem, cannot even locate windows install for Vista, where he's spent all day on this MiFi and Vista error 1720, it sucks

  http://support.vzw.com/CLC/

  First thing to do is to contact the Support of Verizon at the link above.

  See you soon. Mick Murphy - Microsoft partner

• I can't install (error says Windows Vista not supported (LR6), I use Windows 7 SP1 worms. 6.1 What is the problem?)

  I can't install (error says Windows Vista not supported (LR6), I use Windows 7 SP1 worms. 6.1 What is the problem?)

  About Vista, but is not https://forums.adobe.com/thread/1836232

• error during windows vista games

  whenever I try to play a game on my laptop - windows vista - it displays an error that says: Falied to create DirectX device

  How can I solve this problem?

  Hi Aarthishetty,

  Run the DXDIAG in the start search bar. The result should tell you what the problem is. I guess that you will have to install the latest version of directX on your computer.

• Cannot install LifeCam Cinema "Setup can not continue" error on Windows Vista

  Original title: I can not install Lifecam cinema on Vista Business.  Installation dies and points to kb/935961.  I followed all the recommendations in there and still no luck. Help!

  LifeCam Cinema just bought.  I have tried to install from DVD (version 3.5 installation) as well as downloaded 3.6 install from the Microsoft Web site.  Installation starts, but then fails with an error indicating that the installer cannot continue, look at support.microsoft.com/kb/935961.   I went through all the methods in this kb, nothing helps.   I'm on vista Business, SP2 and have kept with Windows updates.   I tried the end of update/install .net framework 4.0 and that did not help either.   I have NOT yet attempted to plug the camera into the USB slot at this point.

  Help!

  Hello

  1. What is the brand and model of the computer?

  2. What is the security software installed on the computer?

  3. have you made changes on the computer recently?

  4. are you able to install other programs and applications?

  5. What are the steps you tried?

  6. What is the exact error message when installation fails?

  Method 1.

  I also suggest you run the fix it tool for the link.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2.

  Resolve the error "Setup cannot continue" when you install the LifeCam software

  http://support.Microsoft.com/kb/973297

   

  Note:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must activate it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let me know if it worked.

• "Camera connection error" on windows vista

  former title: uploading Photos when Vista does not recognize the driver.

  I have a camera 100K 5 years, that comes to be unpacked nine (a gift of 'Which' publications), but have been thwarted by uploading the photos because it seems that Vista does not recognize the driver. It says "camera connection error"? The camera operating manual explains how to work around the problem of "Windows 98, Windows ME, Windows XP & Windows 2000."  Windows Vista was not around at the time so no explanation is provided in the user manual.

  Could there be a solution that doesn't involve my purchase of another digital camera?

  The manufacturer of the device writes the drivers, not Microsoft.

  It would be best if you contact the manufacturer of the camera and ask them a solution to this issue.

  See you soon.

  Mick Murphy - Microsoft partner

• Drivers error recover Windows Vista on Satellite A200

  Hello

  I replaced the HD of my Toshiba Satellite A200. Replicate the original drive of partitioning in the new drive and installed the original SO (Windows Vista) from the recovery disc.

  Everything was fine. However, when I booted Windows for the first time, he could not put an end to the automatic configuration phase. An error message appears on the screen: he had been unable to find all the drivers it needs.

  After accepting the error message, windows has restarted the system without giving me no chance.

  Can anyone tell me what was wrong with the Windows recovery process?
  How can I add the necessary drivers or skip the process of autoconfiguration to do more later?

  Unfortunately, no one can say with certainty what went wrong.
  Please set the BIOS to the default settings and try to install recovery image once more. It will be interesting to see if the same problem occurs again.

• Error updating Windows Vista Sp2 ox50004005

  Dear Admins,

  I try to update my windows vista Sp1 to SP2, but it gives the ox50004005 error code. updating until the last stage 3 but after that he brings updated.

  Please, I can't use the new programs, they all want SP2. Also, windows live messenger.

  Thank you.

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 to give application Norton or McAfee application ever been installed on this computer?

  3. do you have a free trial Norton or a McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. is this really an error 0 x 80004005 (vs 0 x 50004005)?

  ====================================

  Error message when you try to install Windows Vista Service Pack 2 or Windows Server 2008 Service Pack 2: "an internal error occurred during the installation of the service pack.
  http://support.Microsoft.com/kb/967818

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Free unlimited installation and compatibility support is available for issues related to Windows Vista Service Packs. Availability of support chat or messaging differs depending on your location. Some questions may require more support for which it has advanced a charge: http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error 80070490 - Windows Vista - cannot install important updates__

  I have Windows Vista and Service Pack 1 installed. However, I get the message saying that Windows Update may not all updates.

  I have Microsoft.NET Framework 3.5 Service Pack 1 and .net Framework 3.5 updated fmaily (KB951847) x 86 which is a seedbed update but won't let me install it.

  How can I fix this?

  Thank you

  See: http://windows.microsoft.com/en-AU/windows-vista/Windows-Update-error-80070490

  ....... If the system update readiness tool solves the problem, you need to repairWindows. .....

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• iTunes 7 (127 of Windows error) error on Windows Vista

  Original title: error 7 (Windows error 127)

  I'm trying to re - install iTunes and every time I get the message iTunes has not been installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 127).  My system is Vista.  I've not unhooked iTunes several times and have tried several times to reinstall.  Help, please.

  Hi help in brentwood,

  Looks like the installation is broken. Remove every trace of iTunes and other apple software and utilities form the computer and try to re-setup.

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  The steps above will that all iTunes components are removed from the computer. Once this is done, you can reinstall the software.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error updating Windows VISTA OX8024402C

  What is the solution for Windows Update error OX8024402C(2016-09-10-T-08_58_50P)?

  How can I reinstall components update Windows with a Microsoft Tool that is always available for Windows VISTA home edition?  Microsoft still supports VISTA?  It is a year now and I can't get updates; Research of update crashes.  I tried several recommendations of correction through the Microsoft Community with a negative result.  I tried a Microsoft Fixit Tool that reports 2 errors aren't fixed which includes error OX8024402C(2016-09-10-T-08_58_50P). Microsoft Servers don't know the Windows VISTA updates for support Windows 10?  How can I get through Microsoft for direct assistance on this serious mistake that is extremely difficult to define? And Microsoft does this help?

  Install all the updates that are listed in the table above this page manually:

  http://Wu.krelay.de/en/

  The value of the automatic updates to 'never check updates' and restart Windows before installing.

  Best regards, VZ

• Windows Vista device not recognized USB

  I tried all the suggestions to solve this problem. What else is there to do. Right now I'm running the systm scan through the command line. The last thing that I had plugged into my computer for the USB error messsage to appear was my iPod. I've never had other USB problems besides this one. I have an A135-S2326 Toshila provided with Windows Vista Home Basic already installed. I have the latest update and BIOS version. I have reset the BIOS to the default setting and changed the time. I unplugged the computer from its "source and the battery. I've disabled all the USB ports restarted the computer, their permitted again. I uninstalled all the USB ports and let Windows reinstall them. I did everything I know to do, and still nothing. I have read and looked for a solution over and over again. Can someone help me please. I am in desperate need of a solution like yesterday. Thank you!!!

  Try a system restore to select a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.Apple.com/support/iPod/

  And also ask Apple iPod support in their product

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  And download the latest USB Universal Serial Bus Controllers for your model laptop from toshiba.

  See you soon. Mick Murphy - Microsoft partner

• Help with error message: "Windows Vista Home Premium product key you typed in is invalid for activation.

  Original title: help with error message... Please...!

  I use a desktop PC of HP Pavilion a6202.uk with Windows Vista Home Premium & Microsoft Office 2003.  When I am back from vacation & turned on my PC, my password was OK, but rather to raise Windows, I received the following message: "Windows Vista Home Premium product key you typed in is invalid for activation.  He then listed the following options: "access your computer with reduced functionality (this will allow you to buy a product online key)" or "Type a different product key" or "contact HP to help solve this problem."

  I have no idea what a product key is and don't have anything either in the type comes to connect as usual.  I can't access anything to be same to reduced functionality.  I can not type in a new product key because I did not.  I can not contact HP - phone number does not... !!

  I'm quite desperate, I travel docs to print and e-mail to answer and I don't have any idea what is happening.  Please can someone help with this not very IT clued-up DTP...!

  Moved from Vista programs Forum.

  You should have a sticker with the product key on your computer, on the bottom, or under the battery cover.  I try to type this key in and see if it accepts it.  If this isn't the case, you might not have an authentic version of Windows installed.