Camera photo & Mic settings by site

Similar Questions

• C2M81UA #ABA: camera photo & PC settings do not work.

  The camera & pc settings do not work after the update of Windows 8 to 8.1 Windows. This is a laptop of HP ENVY m4. Its camera does not open. Help, please. And pc settings also does not open.

  Hi @Diya1,

  Welcome to the HP Forums!

  It's a great place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I have the bar who after upgrade to 8.1 Windows your Webcam does not open and you don't have a laptop settings.

  As you have no parameters of laptop, it sounds as if something has not installed correctly.

  I suggest you try a Refresh Your PC to solve problems (Windows 8) to see if that will fix it.

  If the problem persists I suggest make a recovery in the factory.

  Performing a recovery of HP (Windows 8) system

  There is an option to backup your personal files to prevent loss of data during the recovery process. If you have not already done one, now would be a good time.

  HP computers - restore files that have been supported to the top using HP Recovery Manager (Windows 8)

  HP computers - update of Windows 8 to 8.1

  If you still have a problem with the Webcam after this here is a link to help you.

  Webcam troubleshooting (Windows 8)

  Good luck!

• How to download photos of 'Photos' to any Web site

  I usually download the photos from my SD card on "Photos" app on Mac.

  Recently I wanted to download a photograph of the 'Photos' to a Web site. But when I click on the upload button, I get a finder window where in which I'm not able to see the photos of the "Photo". Can anyone help me on how to download photos of 'Photos' on any Web site through a browser.

  Thank you

  Babunath

  You can right click on your "iPhoto Library" (in the Finder, at least) it will open like a folder and press "Show Package Contents". The original images are in the original named file and images published in the "modified" folder (in iPhoto) I'm not sure of the folder "Data" (an alias for Data.noindex), it may just be a backup. To check, you can also click with the right button on a photo in iPhoto and select "Show the file" and it will take you to the source location.

  You can create aliases to modified, the data and original folders to facilitate access.

  EMAILING STUFF: When you have a 'Open file' dialog box (to choose the files to download, etc.) on the left, there is also a section of media, which makes it convenient to access iPhoto photos. Pretty easy actually, not need to navigate in a package.

• Photo upload for web site... where are my albums?

  Here's my situation:

  I am on several forums online and often need to upload a photo or two.  I click on the "upload photo" icon within the web site and then select something like a 'Browse folders' menu  On my computer, I can then go down to 'media' and select 'photos '.  I will choose 'albums' and then see all the photos I have in my load "all photos".  I can choose any photo for download, but that its very tedious because of the number of photos that I have.  Nowhere can I see any of the individual albums that I put in place.  Thus, for example, say that I created an album called 'Holiday 2016' and want to choose a photo in the album.  I don't see any way to select this album, because I can not find any screen showing albums I created.  I can't go on 'Memories', 'Years', etc., but not album that I created and moved the pictures to.

  Is there a way I can get to my own albums of the Media/Photo option that is used to transfer the photos to a web site?  This was very frustrating so far.

  they need to see the (they do on my system OS X 10.11.4 and Photos 1.5) - restart and try again

  You don't have to click on the triangle to the left of the word albums

  

  LN

• I downloaded my camera photos to "my pictures", but they are separated. How do you put them all in one folder?

  original title: My Pictures folder

  I downloaded my camera photos to "my pictures", but they are separated. How do you put them all in one folder?

  Open my pictures. File | New | Folder and create a new folder. Hold down the CTRL key while you click on all the pix for highlight and drag them into the new folder. Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• I bought a latitude d530 use. It came with Windows 7. Site Web of Dell initially said vista wit came. It is no longer start. Error says check the data cable

  I bought a latitude d530 use. It came with Windows 7. Site Web of Dell initially said vista wit came. It is no longer start. Error says check the data cable. Sometimes, reinstall drive. I do not have the windows CD. Can I download the original Windows on android phone and the transfer

  You can download and create a bootable copy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?tab=question&status=unanswered

  then

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• Web cam photos

  When I insert my chip of my trail cam, a message indicates that there is no file and does not show the photos.

  How can I change this so that I can see the pictures?

  It would be a question for web cam manufacturer or their manual/instruction files. Visit their Web site.

• Can't see ALL my photos when browsing web site for download

  When I'm on a web site (Kodak, yahoo mail, etc.) n I click on browse to see all my photos and select the ones I downloaded from the web site, I can't access my photos.  IF I go directly (offline) to my images under Windows, I see hundreds, but when online as shown above, I can only access a limited number of them. Is this something that I need to 'run' for update or what?

  Hi youneak,

  1. What is your default browser?

  2. were you able to download photos before without any problem?

  3. where are the photos?

  4. you receive messages or error codes when you try to access all photos?

  Method 1:

  Disable or rather uninstall your antivirus and other security software installed and try to import. If this helps you to navigate to the desired folder and get the photos uploaded, this would indicate that the setting of firewall/antivirus blocking you to exert the action. You may need to configure some settings in the software to allow the same.

  Note: The computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 2:

  You can try to disable add ons and check if it helps:

  Step 1:

  Run Internet explorer with no Add - ons. Steps to open Internet with no mode of modules:

  a. click on start

  (b) in the search box, type in Internet explore

  c. Select Internet (no add-on mode)

  If you were able to access the Web site without any problems, then the module may cause the error.

  Step 2: Measures to determine which add-on may be the cause of the error

  a. open Internet explorer.

  b. click on tools, click on Manage Add-ons, and then click Enable or disable add-ons

  c. in the list view, click Add-ons that have been used by Internet Explorer to display all add-ons.

  d. click on the Add-ons that you want to activate, and then select Enable.

  e. Repeat steps above for each module that you want to activate.

  Check out the link:

  Information about complementary modules:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Internet-Explorer-Add-ons-frequently-asked-questions

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to move photos in windows live photo gallery to another site

  I have pictures that I downloaded from my camera windows live photo gallery. How can I move to another site to view?

  That use other features of download sites,

  Bed your hard drive Windows live photo gallery, it stores nothing except if they have been downloaded to skydive.

• Xperia z3 compact camera photos in low resolution of loading

  Hi, I have a problem when you want to see my photos from the camera to the app "album". When double tapping the images (to zoom) that often, but not always zooms in to a very low resolution and blocky image quality.

  The photos are saved on the sd card (class 10 sandisk ultra 32gig).

  All this experience?

  Thanks in advance for any help

  Settings-applications-all-album storage and media, stop and erase the data. Turn it back on.

• MIC settings

  I was playing around with my settings, as I was on Skype because I was told that my microphone does not work. I went to control panel, hardware and sound, manage devices audio and played a bit with the record setting to get the microphone to work. I changed the microphone voice against zero option and am now unable to undo what I did. Is it possible that I can get the mic setting to the default microphone to my computer?

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often and
  then install the latest version. Restart and check after each test, not uncommon to
  run the driver 1-4 times or more. Just make sure that the version you have installed appears
  on the driver tab.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check Show disconnected
  Devices and display disabled devices - check your micro - highlight them and then at the bottom right
  Properties. Make sure that the appropriate injector is enabled and check the other settings - tab make levels
  sure MUTE isn't checked and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Roll in camera photo import does not

  Then my wife came to me and said her phone was strange. After investigation, I found that she had memory 0 left in the 'use' tab in the settings! Pursuit of the investigation, he said she had 2.4 GB of "messages". I didn't even know the messages could be "saved". So I decided to import all his pictures his phone on our PC (Acer 5250-0450 running Windows 7-64 bit) is turned off and plugged the phone on the computer and autoplay opened as usual, however it beeps and says "no images found on this device"... but here I am looking at 142 pictures in the camera, not yet on my computer , and autoplay is to say there is nothing there to import! It makes no sense at all. This leads directly to the question in the same sense of 'storage'... when I open iTunes with my wife's phone connected (that's me as well) it shows tons of used for the 'documents and data' and 'other' space, but there is no option to select theses of storage areas and make destruction or adjustments to recover any space (we both 5 phones gig so space is at a premium). I hope there is someone out there who has worked through these types of problems and can help my wife and I recover a semblance of space on our phones. My wife has only 7 apps and 1 gig of songs she listens to at work... There is NO REASON there should be 0 KB of memory on his phone!

  Because you mention iTunes and "film", I suppose that you have an iPhone of some sort.  Seek help or ask your question here--> https://discussions.apple.com/community/iphone/using_iphone

  Space on your iPhone iTunes shows as 'other' is particularly difficult to treat.  There are many, many posts on this topic.  See, for example, https://www.google.com/search?q=iphone+reduce+other+space&ie=utf-8&oe=utf-8

  As far as images go, I never used the "automatic" import tools Windows photo to transfer photos from iPhone for Windows, and is perhaps that these tools are "confused" by the structure of files on the iPhone.  See if the following works for you:

  1. Connect your iPhone to the computer and wait for the "AutoPlay" window to open.  It should look like this:

     

  2. Click on "Open the device to view files" and you should see something like this (note that this iPhone is almost completely full, the bar is red):

     

  3. Double-click on this entry, and you should see a folder named DCIM:

     

  4. Double-click the DCIM folder and you should see another folder with a seemingly random name:

     

  5. Double click on this folder and you should see your photos.  Copy/paste or Drag ' drop them in a folder on your computer.  You can then delete them as you wish using the controls on your phone (I suggest NOT delete files on your phone using Windows):

     

• Import camera (Nikon D300) settings?

  How my Nikon D300 pictures all be imported to adjustments made to blacks, brightness and contrast?  What is an Auto setting (or something I did wrong)?

  I used LR for several years, 25 000 photos and lots of cameras.  When I started to import photos from a new camera (a Nikon D300), I see that the following changes are made to each image:

  • Black + 5
  • + 50 brightness
  • Contrast + 25

  I don't know how it happened.  I seem to not changing the photos (the real photo of import in history has this setting).  My other devices do not have this setting.  Someone please help!

  PS I never recall the use of the synchronization setting for nothing, but I'm suspicious that only this could have that.

  These are the standard settings applied to each RAW image if you do not change the default settings. My guess is that you have never watched before RAW images. JPEG files are all nulled out by default since they have already been developed in camera.

• How do I put my photo and other photo on MY DIRECTORY site

  Firefox is the only site that I don't see my image or other image when I go to MY DIRECTORY, I don't have the problem if I use google crome or e help maybe I hit the bar hurt at some point, I do not know thanks I want to just restore the part photo site. Thank you

  Is he missing pictures then make sure you are not block images from certain domains.

  • Check the permissions for the domain in the active tab in "tools > Page Info > Permissions.
  • Check that the images are enabled: Tools > Options > content: [X] loading images automatically
  • Check exceptions in "tools > Options > content: Load Images > Exceptions.
  • See the tab "tools > Page Info > media ' for blocked images (scroll all the images with the cursor key).

  If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

  There are also extensions (Tools > Modules > Extensions) and security software (firewall, antivirus) that can block images.

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes
  • http://KB.mozillazine.org/Images_or_animations_do_not_load

• Photos from the Web site do not appear on Firefox, but they do in Safari. Did I miss an extension or plug-in?

  Site Web html content appears, but not embedded photos. For example, on the page of rei.com of goods, all data appear except the product photos. In Picasa, outlines of the pictures appear, but not photos. This problem occurred day after cleaning hard drive with OnyX Automator. I run the repair disk utility and rebooted the computer, but the problem persists.

  Is he missing pictures then make sure you are not block images from certain domains.
  See:

  • http://KB.mozillazine.org/Images_or_animations_do_not_load
  • Check the permissions for the domain in the active tab in tools > Page Info > permissions
  • Check that the images are enabled: Firefox > Preferences > content: [X] loading images automatically
  • Check exceptions in Firefox > Preferences > content: Load Images > Exceptions
  • Under the tab "tools > Page Info > media ' for blocked images (scroll images)

  There are also extensions (Tools > Modules > Extensions) and security software (firewall, antivirus) that can block images.

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

  You can use the following steps to check if the images are blocked:

  • Open the web page that has the missing images in a browser tab.
  • Click the site favicon (How do I know if my connection to a Web site is secure?) on the left end of the address bar.
  • Click on the "More information" button to open the "Page Info" with the Security tab selected (also accessible via "tools > Page Info").
  • Go to the Media of the window tab "tools > Page Info.
  • Select the first link of the image and scroll down through the list with the arrow down.
  • If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.