Camera selection help

Similar Questions

• When I select Help and support icon, I get an error message indicating that the feature could not start.

  help and support does not work

  When I select Help and support icon, I get an error message indicating that the feature could not start.

  I use a Vista 32 bits on a HP computer operating system model number m8300f.

  In addition, I bought a copy of Win 7, but who could not load freezing during installation.

  Hello

  Try to run the command in the elevated command prompt, follow the steps below, it could help us solve the problem.

  1. open the start menu, click programs principally made, select accessories.
  2. right click on command prompt, and then click "run as administrator ".
  3. type the following commands in the DOS prompt window and press ENTER at the end
  of each line:

  REGSVR32 MSXML3. DLL/U
  REGSVR32 MSXML3. DLL
  REGSVR32 MSXML6. DLL/U
  REGSVR32 MSXML6. DLL

  (At the elevated command prompt command should not give us any error).

  Restart the computer and try to access help and Support.

  For the problem of installation of windows 7.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  1. How did you start the installation process?

  2. you perform a new installation or an upgrade?

  3. what type of drive you are using for installation?

  4. at what stage of the installation has it stopped?

  5. have you received an error message?

  First of all, I would say that you disconnect external devices connected to the computer except the keyboard and mouse.

  If you have performed an upgrade suggests to restart the computer and you will be prompted for a roll back option.

  Once you're on the office suggests to run Upgrade Advisor and check what needs to be done before you start the upgrade.

  Before you begin the upgrade process to ensure that your computer meets the condition of equipment to install Windows 7 and check on the website of manufacturer computer if the computer is good to run windows 7 or not.

  Installing and reinstalling Windows

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows

• Problem of sequence Source multi camera PLEASE HELP!

  I merged the 3 cameras with sound using the sequence of Source create multiple cameras.  After that I merged it, I don't know why I can not select the "Multi-camera" button (which is gray) so I can choose the shot I want to use. Help, please!

  You can see a good tutorial on the entire process here - http://tv.adobe.com/watch/learn-premiere-pro-cc/multicamera-workflows-with-premiere-pro/

  The help page also step by step - using Adobe Premiere Pro | Multi-cam editing workflow.  I meant step 4. Create a target multiple camera sequence.

• Video format not supported in the camera. Help?

  My phone was used to take some videos of my horse jumping during a show. 3 videos read perfectly but the main I wanted says it is 0:00 in length and shows as just a white tile in the camera roll and when you click on play the phone tells me it is a unsupported video format and that the film cannot be read because the video format is not supported. Its an iPhone 6 s and I have never had this problem before. I tried to import on my macbook, but that will not import the file from my phone, once again because it is a format that is not supported.

  I don't understand how the file may be unsupported, when she was taken on the phone...?

  Any help is appreciated!

  Thanks in advance

  Your video file is corrupt maybe talk to Apple

  For the most part it is caused by a software bug

• My device used to be included in the device under the turbine BP & COM port section manager now it is hub USB root and I can't connect with my camera. Help

  I have a machine that uses a USB to serial connection, after I installed the driver in my computer, it finds the machine and load the device in the ports COM & LPT, but this morning for some reason, he shot my device in the USB root hub system. How to get out of there and recognized him as a COM & LPT device since it is a USB to Serial Port that I can discern the number COM port so that my computer can communicate properly?

  Hello
  
  1. What is the model and brand of the device?
  2. do you see any red or yellow bangs in Device Manager?
   
   
  a. in device, right-click on the Device Manager and select Properties.
  b. now in the Properties window, click on the tab General Post back the message found underdevice status.
  
  Open the Device Manager

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Sequence by select Help please:

  First of all, I'm rather at this new and need help please.

  I created the following sequence:

  CREATE SEQUENCES SQ_CASE_NUMB

  MINVALUE 1

  INCREMENT BY 1

  START WITH 1

  And from this sequence select it below:

  SELECT TO_CHAR (SQ_CASE_NUMB. NEXTVAL)

  | | To_char (SYSDATE, "fm/MM/yy")

  Case_NUMB

  OF THE DOUBLE

  Result:

  Case_NUMB

  08/01/14

  08/02/14

  08/03/14

  Can I combine the sequence 'create' and 'select '? Or should I create a function?

  What is the best option please?

  It depends on what you're trying to reach.  What you use the sequence for?  Primary key?  Experiment?  fun?

  Best option can be answered only if you provide the object...

  BTW - the select query above works, but it does not mean that you should use...  The best thing to do (if you use it as a primary key) is to create a trigger like this:

  create or replace

  TRIGGER "insert name here".

  BEFORE INSERT ON table_name

  FOR EACH LINE

  BEGIN

  SELECT sequence_name. NEXTVAL INTO: DOUBLE NEW.pkcolumn_name;

  END;

• Select help

  Hello, I'm new in oracle sql

  I have table

  wheels unit engine auto

  car 81 kw 2 thickness

  bike                         slim           3

  bus 120 kw double 5

  300 kw ship 8

  car                                            1

  I need write sql code and get this table

  automatic printing unit

  car 3

  81 kw 2

  2 thickness

  bike 3

  3 Slim

  bus 5

  120 kw 5

  5 double

  boat 8

  300kW 8

  Thanks for help

  Hello

  I don't know if you provide an example and if you expect an answer more 'generic', but with ' hard' things, you may want to use

  SELECT auto x, y of the SUM (unit)

  FROM MyTable

  WHERE auto IS NOT NULL

  GROUP BY auto

  UNION ALL

  SELECT the engine, SUM (unit)

  FROM MyTable

  Motor WHERE IS NOT NULL

  GROUP BY engine

  UNION ALL

  SELECT wheels, SUM (unit)

  FROM MyTable

  WHERE the wheels IS NOT NULL

  GROUP BY wheels

  ORDER BY 2, 1

  ;

  HTH,

  Bruno Vroman.

• photos out of sequence in LR 6. I think the reason is b/c I forgot to program time in the new camera. Help!

  This never happened with my previous camera and the previous version of LR.  I recently updated my camera, as well as LR (from PC version 2 for PC version 6).  I just took over a thousand photos at a wedding and once they import into LR they are out of sequence. I tried to arrange time to sort of control/capture, etc., but without success.  It wasn't until I looked at the right column in library mode that I noticed pictures all say the same date and time (year 2000, 12:00 time).  I then realized that I had forgotten to schedule the date and time when I bought my camera. He is the only thing that I can find.  And I really hope there is a way to fix.  Edition will be a TOTAL nightmare if not.   Please, someone help.  Thank you very much in advance...

  In your first post, you said ALL of them have EVEN enter the date and the hour of 12:00 2000.   If this is the capture time saved that with a TIME EDIT CAPTURE will not help your problem at all.  Change changes just at the time of capture the time and date of each photo, of a fixed amount and from your pictures have the same original capture times they will have identical adjusted capture time.  Sort by FILE NAME must have worked unless you did a name change when importing.  If this is the case you are out of luck unless you still have the original files on the card from the camera.

• SQL - select Help - box When? Return value of the second Table?

  -Next to people on this forum I am probably somewhere between a beginner and an intermediate SQL user.

  Ive been using a case when stated in plsql to find "all who has status in any program was canceled during a specific time, but have become or are still active in another program"

  So, Im actually trying to return a value from another table in a case where, but this isn't anthing taste other than a text declared as 'Yes' or 'no '.

  This is the select statement - y at - it another way to do it where I can get the results I need?

  -case when pp.party_id in (select pp1.party_id - cancelled active clients in another program)

  of asa.program_participation pp1,.

  ASA.curr_prog_participation_status cpps1

  where pp1.program_participation_id = cpps1.program_participation_id

  and pp1.party_id = pp.party_id

  and cpps1.code_value = 'Act')

  So 'Yes' is still 'No' end as Active_in_Other_Prg

  So - instead of 'Yes', I want essentially the program they are active or pp1.program_id, another null

  It is possible that the client can be active in more than one program as well.

  Any help is greatly appreciated, I explored with if and decodes but I can't get anything to work.

  Ben

  Looks like an outer join. See doc ora: joins at

  Select p

  q.party_id

  q.program_id

  of table_with_party_id p

  , (select pp1.party_id - cancelled active clients in another program)

  pp1.program_id

  of asa.program_participation pp1,.

  ASA.curr_prog_participation_status cpps1

  where pp1.program_participation_id = cpps1.program_participation_id

  and pp1.party_id = pp.party_id

  and cpps1.code_value = 'ACT') q

  where p.party_id = q.party_id (+)

  Note: In the example above shoudn't it be a space between the (and +), but the forum software automatically converts to

  The outer join will connect display all records in the table p and q records only if fits the party_id, IE q.party_id and q.program_id will be null if there is no match.

  Edit: adding program_id

• New GoPro camera need help with rate of 240 fps for idle

  I'm enjoying the possibilities offered by the new extreme sport GoPro camera and need help when it comes to using different rates in Premiere Pro. The pictures I brought in was shot at 240 fps and are indicated as such in the project Panel. However, when I preview the item in the Source Panel he rereads at normal speed and he has not slowed down. If it was shot at 240 fps so I think that Premiere Pro would play this back to 29.97 FPS and true would be slowed down.

  I am a beginner and you have to learn how to treat slow clips that I bring that are supposed to be slowed down.

  TIA,

  Ken

  Rod,

  You are not wrong, exactly, but I must respond to some of your statements. Premiere Pro is not what some think to do this. Craig and I had this conversation recently. When it Premiere Pro sees 240 fps on a sequence of 24 frames per second, it gives executives. About 90% of them.

  Keep in mind that some people turn it quickly because the action is fast, and they want that expected as fast they can project.

  Let's say you have a movie projector that shows 24 fps. No matter what film reel you load into this projector, you see the film at 24 frames per second.

  Premiere Pro will change the 240 IPS or 60 frames per second to 24 frames per second by dropping frames. It is not generally what people want if they have bothered to get away with it. Yes, it shows you 24 fps, but by dropping frames, is not playing frames one at a time.

  This means that if you shoot at 48 frames per second, you get slowed down when projected at 24 frames per second.

  Only if interpret you it or use an effect to slow it down. The effect is not as accurate as the interpreter.

  Think of it THAT WAY and find out what you have to do to make your premiere pro version are TREATING your images like it is projected at 24 frames per second.  In other words, no boxes are deleted. No boxes are added. NOTHING moves the way you SHOT IT.  Each image you shot will be used exactly as you he turned.

  Once again, that if interpret you it this way.

  This is NOT MATH or EFFECTS etc.

  Well, if interpret you it this is not mathematics, but if you slow down using a percentage, then it is math, and I do not think that it slows down the effect of which is the right way to do it.

  Don't download misled by all unwanted people enter with making it slower or faster time with interpolation.

  If you can not Surdemarrage or shoot at a higher rate, interpolation is all you have. But Ken did not have this problem, thank God.

  If you don't know exactly which continues with the sequences interpret things adobe has some help specify exactly files.

  There's not much to it. If you want to slow down 50% interpret it at 120 frames per second. If you want to slow down 90%, interpret it to 24 fps. Anything in between is up to you.

• Select help with sql

  Hello
  could you please help write select sql to retrieve the maximum number of concurrent users, something to check?
  
  user_id, rec_start, rec_end
  1, 01.10.2009 12:01, 01.10.2009 13:11
  2, 01.10.2009 13:12, 01.10.2009 14:04
  3, 01.10.2009 13:35, 01.10.2009 13:55
  1, 01.10.2009 14:35, 01.10.2009 14:50
  1, 01.10.2009 14:45, 01.10.2009 14:50
  
  I would like:
  hour, max_of_conc_users
  01.10.2009 12: 1 - no more then 1 user at the same time
  01.10.2009 13: 2 - user_id 2and 3 record at the same time
  01.10.2009 14: 2 - user_id 1 to 2 sessions
  
  Thank you
  D.

  Hello

  Interesting problem!

  We will change a bit, your sample data for the (total connections per hour) much simpler problem solved by Sven and Hoek has not coincidentally the same results as your problem (the high concurrent users per hour).
  I changed the data of Hoek, adding a line, which has been lgged in for the entire period covered by others:

  CREATE TABLE t as
    select 9 user_id, to_date('01.10.2009 12:01', 'dd.mm.yyyy hh24:mi') rec_start, to_date('01.10.2009 14:49', 'dd.mm.yyyy hh24:mi') rec_end from dual union all
    select 1 user_id, to_date('01.10.2009 12:01', 'dd.mm.yyyy hh24:mi') rec_start, to_date('01.10.2009 13:11', 'dd.mm.yyyy hh24:mi') rec_end from dual union all
    select 2, to_date('01.10.2009 13:12', 'dd.mm.yyyy hh24:mi'), to_date('01.10.2009 14:04', 'dd.mm.yyyy hh24:mi') from dual union all
    select 3, to_date('01.10.2009 13:35', 'dd.mm.yyyy hh24:mi'), to_date('01.10.2009 13:55', 'dd.mm.yyyy hh24:mi') from dual union all
    select 1, to_date('01.10.2009 14:35', 'dd.mm.yyyy hh24:mi'), to_date('01.10.2009 14:50', 'dd.mm.yyyy hh24:mi') from dual union all
    select 1, to_date('01.10.2009 14:45', 'dd.mm.yyyy hh24:mi'), to_date('01.10.2009 14:50', 'dd.mm.yyyy hh24:mi') from dual
  ;
  

  The query below unpivots these data in separate lines for rec_start and rec_end. We use the analytical SUM function to count each + 1 rec_start and each rec_end as -1 to get the number of concurrent users at any time. As soon as we have these data, we can use GROUP BY TRUNC (dt, 'HH')as Sven Hoek has suggested, to get the maximum by houir:

  WITH     cntr         AS
  (
       SELECT     1  AS cnt     FROM dual     UNION ALL
       SELECT     -1 AS cnt     FROM dual
  )
  ,     events     AS
  (
       SELECT     CASE     cntr.cnt
                 WHEN   1  THEN  t.rec_start
                 WHEN  -1  THEN     t.rec_end
            END     AS dt
       ,     cntr.cnt
       FROM          t
       CROSS JOIN     cntr
  )
  ,     concurrent_users     AS
  (
       SELECT     TRUNC (dt, 'HH')          AS hour
       ,     SUM (cnt) OVER (ORDER BY dt)     AS concurrent_users
       FROM     events
  )
  SELECT       hour
  ,       MAX (concurrent_users)     AS max_of_conc_users
  FROM       concurrent_users
  GROUP BY  hour
  ORDER BY  hour;
  

  Output:

  HOUR             MAX_OF_CONC_USERS
  ---------------- -----------------
  01.10.2009 12:00                 2
  01.10.2009 13:00                 3
  01.10.2009 14:00                 3
  

• Select help request - integrated

  Hello
  
  The following query will show me the catalog ID and Descriptions of all the outfits hired
  for each branch, with revenues generated in descending order...
  

  SELECT Members_Order.Catalogue_ID, Item.Item_Description, Item.Colour Orders.Branch_ID, Item.Hire_Charge, Members_Order.Number_of_Days, (Hire_Charge*Number_of_Days) AS Total
  From Members_Order, Item, Orders
  WHERE Members_Order.Item_ID = Item.Item_ID
  AND Members_Order.Order_ID = Orders.Order_ID
  ORDER BY Total DESC;

  What I want to do now is to create a query to display the details of the outfits, which are the same color as the suit that has generated the most revenue. I'm guessing that this will involve a choose embedded, using the base of the query above, but I'm not sure about what should go with the select embedded?
  
  I have the following to this day, could someone help me finish or point me to the right direction...?
  

  SELECT Members_Order.Catalogue_ID, Item.Item_Description, Item.Colour, Item.Hire_Charge, Members_Order.Number_of_Days, (Hire_Charge*Number_of_Days) AS Total
  From Members_Order, Item, Orders
  WHERE Members_Order.Item_ID = Item.Item_ID
  AND Colour = (SELECT Colour FROM Item WHERE 
  ;

  Published by: user10945931 on April 15, 2009 19:50

  Hello

  I'm surprised that ran at all.

  I made a mistake in my previous answer. The second line of SELECTION (right before ROW_NUMBER) shouldn't be there at all. My apologies.
  Here's what I meant:

  WITH  ranked_data  As
  (
       SELECT  Members_Order.Catalogue_ID
       ,     Item.Item_Description
       ,     Item.Colour
       ,     Orders.Branch_ID
       ,     Item.Hire_Charge
       ,     Members_Order.Number_of_Days
       ,     (Hire_Charge * Number_of_Days)     AS Total
       ,     RANK () OVER (ORDER BY Hire_Charge * Number_of_Days DESC)
                                                 AS rnk
       FROM     Members_Order
       ,     Item
       ,     Orders
       WHERE     Members_Order.Item_ID     = Item.Item_ID
       AND     Members_Order.Order_ID     = Orders.Order_ID
  )
  SELECT     *     -- or list all columns except rnk
  FROM     ranked_data
  WHERE     colour  = (
              SELECT  colour
              FROM       ranked_data
              WHERE       rnk     = 1
              );
  

• How to fix the Front facing camera? Help!

  So a few days ago, I went on my photo app (which has the most recent updated), and all of a sudden, I have received a msg saying "camera error". I don't know what I did because my rear camera works perfectly well. Its when I turn the camera to deal with myself, no image is displayed. I tried:
  Data erasing & wiping cache, delete the apps that used the device (for example, Snapchat), I put my phone into safe mode, I did a factory reset, I tried force closing, uninstallation of updates to update, reinstall the application, obtain a third-party app part... and I do not have any application that deals with a flashlight.
  All the people mentioned were not working. What should I do?

  Several times, this is the sign of a hardware issue - module loose connection, camera, etc. Especially since you have tried everything else.

  Is your device warranty? If so, I contact your carrier or Motorola and see about maintenance or replacement.

• Select help request

  Oracle version 10.2.0.2.0

  Can I write in a single SQL aside the function instead of if... else. I tried with the case but not thru. Please advice

  FUNCTION mark_place

  (

  i_year in NUMBERS

  i_month in varchar2,

  i_school_code in varchar2,

  i_paper_code in varchar2,

  i_condition in varchar2)

  Return number

  IS

  number of mark_count;

  Start

  IF i_condition = "COMPLETE" THEN

  Select count (criteria_mark_status) in mark_count

  of ssn_yes

  where school_code = i_school_code

  and year = i_year

  and month = i_month

  and paper_code = i_paper_code

  and criteria_mark_status = "COMPLETE";

  on the other

  Select count (criteria_mark_status) in mark_count

  of ssn_yes

  where school_code = i_school_code

  and year = i_year

  and month = i_month

  and paper_code = i_paper_code

  and criteria_mark_status! = "FULL";

  END IF;

  Return mark_count;

  end mark_place;

  An option

   select count(criteria_mark_status) into mark_count
      from ssn_yes
      where   school_code = i_school_code
      and year = i_year
      and month = i_month
      and paper_code = i_paper_code
      and (case
              when i_condition = 'COMPLETE' and criteria_mark_status  = 'COMPLETE' then 'VALID'
              when i_condition != 'COMPLETE'and criteria_mark_status  != 'COMPLETE' then 'VALID'
        end) = 'VALID';
  

  See you soon

  AJ

• The upgrade of the camera selections

  How can I do to upgrade my Photoshop elements 10 by consenting to my "new camera" Canon 70 d to download raw images?

  You need Camera Raw 8.2 or higher, with 10 items, you can use the free dng converter.

  https://helpx.Adobe.com/Photoshop/digital-negative.html