Cameras Xperia double Z5 (E6633) off center

Similar Questions

• My Xperia double Z3 has a constant red led when plugged in, it can not turn on

  Hello

  When I woke in the morning today, I noticed that my Xperia double Z3 shows only the red light (steady not flashing) when I plug in to recharge. I can't turn on by pressing the power button, can't restart even using Power + Volume buttons. I also tried the procedure PC Companion collection, power off and then Volume and power on, connect to the PC and autodetect... nothing works.

  I have the phone since March 2015, only 3 months; everything was perfect before this big problem: no software, duration of the battery problem was excellent (at least 1 full day), camera ok, the two sim detected and configured without problems, also no problem when wet my phonet.

  Can you help me pls?

  Hi guys,.

  I have sent my... secured Sony smartphone was physical damage to the unit. Sony sent me a new phone, it's very pretty, offsetting the long waiting time for having a flagship phone in my hands again.

  Thanks for your advice guys, I appreciate it.

  Concerning

  Good day

• OfficeJet Pro 8630: hp 8630 printing Off Center when copying

  Printer prints well out of the computer, but prints off the coast on one side, when copying without worrying if the paper is flat or powered by the ADF.  Can't see obstructions.  Yet once, print very well when printing emails, downloads etc.  Only off-center by trying to use it as a copier.

  Hello

  If it is a copy, it is the printer and not from any software.

  Have you tried to do a 'Restore Factory defaults?"

  I wonder if that would help, except perhaps appeal for support.

  Thank you.

• Color Laserjet pro m252dw: print off center

  My printer prints slightly biased (as too far to the right). I did the alignment test and tried to solve the problem by adjusting printing to several mm to the left, but it does not work. I am trying to print labels with graphics that contain a border of circle-because the page is printing off center seem no good labels. I print on sticker paper for labels and have used several different programs label to print from, and all have the same resulf of centred off the coast. Any suggestions? Help would be very appreciated!

  Hey @OldSoulA,

  Welcome to the Forums of HP Support!

  I understand that you have a problem of quality when printing labels from your computer Windows 8.1 to your HP Color LaserJet Pro M252dw. I would like to help you today with this problem of printing the label. Thank you for all the troubleshooting steps you tried before reaching out for support. At this point, I'm going to make sure that the labels that you are printing on conform to the specifications of your HP Laserjet Printer. Once you confirm that the labels you are using are supported, we will miss some tests in order to check if this central issue is caused by the type of paper or a problem of setting. Please follow the steps below.

  Step 1: Check paper:

  According to the specifications of your HP Laserjet Printer, the following labels are supported:

  

  • You can load up to 50 sheets of labels into the tray at 1 time. Do not exceed 50 sheets
  • Avoid mixing media into the tray with paper. Avoid labels on top of plain white paper in your loading tray
  • Avoid using labels that are separated from the backing sheet, wrinkled or damaged in any way
  • Do not use labels that have exposed the carrier sheet
  • Do power not more than once a sheet of labels into the printer
  • Avoid printing on both sides of the labels
  • Avoid printing on sheets which the labels have been removed
  • Make sure that you use the specific Laser as adhesive labels can damage internal components in your machine.

  Once you have confirmed that the paper of the label that you are using is meet the specifications of your printer can you please move to the next step.

  Step 2: Print Self Test:

  1. Load of the plain white paper in your paper tray
  2. On the front panel of your printer then drag your finger to the left and select configuration
  3. Under the menu Setup touch Service
  4. Tap the cleaning Page
  5. Print a cleaning Page now. This page should show the colored lines centered

  Check the alignment of the present report.

  • The colored lines appear centered?
  • Printing documents from your computer on plain white paper print centered?

  Please reply to this message with the result of your troubleshooting so far. Once I have the results of your troubleshooting with the answers to my questions above, I'll be more than happy to provide additional assistance for this problem. I look forward to hear from you!

• Why is-page page printing off center

  I have a HP Photosmart 7510 on a Windows 7 operating system.

  Each unique document print off center without worrying about how I put the margins.

  How can I fix this so that documents print evenly and centred on the paper?

  Thank you in advance for your prompt response.

  JOPER

  HI joper,.

  It has always been this or it just started recently?

  You did it change?

  Here a link to your manual covering the margins of adjustment.

  It may have something to do with the software on your computer. You can Uninstall

  the software and the reinstall again.

  Let us know if that helps.

• HP Laserjet 2605DN - text, borders off center printing

  Everything worked fine until I bought a new computer that has Windows 8. Now when I print, text and graphics are biased as well, vertically, horizontally, which makes this practically unusable printer for what I need. I tried to install and reinstall the printer driver - have done twice in the past months, but neither attack resulted in no change to the output.

  This is the only printer that I have problems with.

  I need to create and print certain documents that must be focused. I hope someone can offer a solution.

  Thank you.

  I worked with it for a while and even reset the printer to its default settings. But it was always the same text off center and the border when I printed my test document. Last resort, I downloaded and installed the driver PostScript HP Laserjet 2605DN, and who took care of the problem. Although not perfectly centered on the page, it is close.

  I wanted to just update this post with the solution that worked for me.

• M277dw MFP: scan off center and crooked M277dw MFP

  I meet currently a problem with my Control Panel printer scans comes out off - center and crooked.  They scan the desktop app and get out normal.  In addition the copies come out straight and normal.  The scans are deployed from the flat bed scanner.  I tried the document feeder and still only posted the scans I made from the Panel of real control on the printer on my network.

  Thank you
  Philippe

  Hi @Richy1971,

  Welcome to the HP Forums!

  I noticed that the scans are biased and crooked with your HP Laserjet M277dw MFP. I am pleased to see that for you!

  Please try a hard reset by following the instructions contained in this message, How to perform a hard reset, by @Rich1. It is important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  After the hard reset, check the printer firmware is up-to-date. Get the latest Firmware and updates.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope these steps help!

• When I open an email, the screen is shifted off center to the left about 3 inches.

  Original title: Live Mail opens to a quirky screen

  When I opened a mail on Windows Live Mail 2012, the screen is shifted off center to the left about 3 inches. My arrow on the right does not have to re-center the page so I can't use all the controls on the left or read the email because the left is not visible. How can I fix it?

  Not sure what you mean by the arrow on the right.
   
  Make sure that the Central box in the top right is a unique place. Take the banner at the top and drag the window where you want it. Close all other windows first and this one last and Windows will remember the size and placement.
   

• Question of Simulator: white screen off center instead of application

  Hello

  I'm new on the BlackBerry community, the development of BlackBerry et al. Today, I downloaded the SDK to test the Tablet Simulator 0.9.2 but I already spent several hours trying to get something to run without success.

  The Simulator is installed without any apparent problems. I have read the forums today and I had none of the problems that others have mentioned, as a screen freezes or problems during startup.

  I use a trial version of VMWare Fusion 3.1.2 on Mac OS X 10.6.6.

  I don't have Adobe Flash Builder, so I use TextWrangler. I wrote an applescript script which, during the recording of my actionscript file, called a perl script (I know, sounds redundant, but it works) and fact the compilation for me as posted by Taylor Byrnes (amxmlc, blackberry-airpackager). I'm able to talk to the simulator that my output from compilation shows any errors (as far as I know), but my application appear in the Simulator without the icon that I have provided.

  When the application is started, all I get is a white screen off-center without content about it.

  I've also compiled the HelloWorld example provided. What I received was another app in the Simulator with the default icon that does exactly the same thing: a biased white screen. Whenever I have recompile a script with minor changes, the icons in the Simulator flash for a millisecond, and then I get the same off white screen.

  Someone knows something like that? Clues?

  There is obviously something I have to hurt. I can put my arguments to command-line and script if that helps. I tested my swf file in the Flash Player application and it shows. All what I have there is a red dwarf with a TextField on the top.

  Sorry for the comments and thanks for any help, you can provide.

  Daniel

  Are there spaces in folder names anywhere in the path to your project on your computer?  If so try to migrate your development to a folder that has no space in any folder named everywhere in its path.  Maybe it's not the cause of the problem, but in all cases, you should remove it as a possibility.  Windows users are discouraged to use the directory C:\Documents and Settings typical for Playbook dirs project.

  The other thing that went off to the top of some people using versions of command line is picky how the tools are.  In your command line, try using the - C option, and make sure it's between - package .bar and installApp -:

  I.e. instead of:

  blackberry-airpackager -package HelloWorld.bar -installApp -launchApp HelloWorld-app.xml HelloWorld.swf [ICON FILE NAME] -device [PLAYBOOK IP ADDRESS] -password [SIMULATOR PASSWORD]
  

  follow these steps:

  blackberry-airpackager -package HelloWorld.bar -C [YOUR PROJECT WORKING DIR} -installApp -launchApp HelloWorld-app.xml HelloWorld.swf [ICON FILE NAME] -device [PLAYBOOK IP ADDRESS] -password [SIMULATOR PASSWORD]
  

  The airpackager in the SDK 0.9.1 was picky about the order of the command line options.  I'm still not on 0.9.2 but see nothing in the notes to having fixed them thereon.

  Edit: Note; I've never had a center off white screen w/all of my command line compiling adventures, but before I got the mantra of the 'proper' command line, I got apps that showed a splash screen and then just went.  I'm on Windows (XP SP3), btw.

• My sensitive page is slightly off-center and the margins have been set to auto.

  My sensitive page is slightly off-center and the margins have been set to auto.

  The width of the box is 1200.

  It seems very well on some computers, but on others its slightly to the right.

  Could we brilliant people here take a look and offer a remedy?

  Your help is deeply appreciated.

  Link is smaller than the page in question

  http://www.dankeithwilliams.com/gregoryart/

  Thank you

  When the screen is at least 1220px everywhere, the page is perfectly centered. The smaller screens don't display the page in the same way because, as you said quite rightly, the container has been set to 1200px - the extra 20px is used for the scroll bar.

  This means that the page is far from being reactive.

  My suggestion would be to create a really responsive design, this can be achieved using queries or media using a framework like Bootstrap. There are also commercial alternatives such as

  • http://www.DMXzone.com/go/22360/DMXzone-bootstrap-3 or
  • Responsive Web Design Extensions, applications, modules and Plugins for Dreamweaver

• LR is off center on my screen I can't see the entire right side of the program

  LR is off center on my screen I can't see the full right of the screen (for example the printing module "TB" top-right

  Please, drag Lightroom window to the left and then click on the maximize button.

  You can also turn to right click on the title bar, and then select expand.

  I hope this helps.

  ~ UL

• slightly off center

  Epson has referred me to Adobe... My 7890 ProStylus Epson prints slightly off center when set to the center of the dialog box print from Photoshop CS6. How can I fix in Photoshop?

  Thank you very much! I got 10.0 Cs6 so I downloaded and installed the 10.6 update and it worked!

• Can't understand why documents print off center

  Problem: When you print a document on legal paper, each page after the first print off center. Specifically, it moves the upper left corner to the middle of the page and prints what it can on the page without narrowing/resizing. This does not happen on the first page (i.e. the first side of the first physical piece of paper if printed one - or two-sided), but it happens on every page after that.

  System: What happens on two different PCs over the WAN even in two different places using two different print servers and four different printers (Xerox 3 and 1 HP). Documents that have this problem come from different sources.

  Windows XP and 7 PCs were used

  Server 2008 and server 2003 are installed on print servers

  Solved my problem here. I managed to solve the problem by choosing "print as image". I don't know in the PDF file causing the printing problem.

• off-center table/page

  someone would be nice enough to review for me why my page verdict we is off center? When I built it originally, it was beautiful. at one point, I did something to change it. the page is built with tables. now, to correct the things I tried to change the css style in the properties panel, which is the value offset 75px on the left, but it didn't budge. could it be buried somewhere else in my css style sheet, or maybe my model? any suggestions appreciated. Thank you

  found the problem. somehow, I badly adjusted the page template so that it has not been set to centered. problem solved.

• I have a problem with the security being off center.

  Hello world. I'm trying to solve the problems on a laptop of series of 15NB57 Phillips, under Vista Home Premium, 32-bit + SP2.

  1 "the Security Center is disabled. After clicking the box "Turn on Now", the error message reads:-"the Security Center

  cannot be started ".

  After visiting the Microsoft Forum, in which relates to this specific issue, after you follow the instructions for 'Services', navigated to the folder 'Security Centre', as shown, & there is NO!

  "Security Center" can be installed on the computer 'Services', without that there is a backup drive, or a system image

  to fall back on, because the computer is old for a few years now, but still in good working condition? And, IF it can be done, how?

  Two software I have for protection that are on the computer are:-Microsoft Essentials, & Spybot S & D. I'd really like to

  you want to be able to put a real anti-virus/anti-spy on software.

  2. in the section 'Firewall' of the program, a command prompt says "Windows Firewall is not using the recommended

  To protect your computer, the settings ".  Along the coast, which is one is an another prompt 'Parameters of update now'.  After clicking

  "Update settings now", the error message reads:-"Windows Firewall was impossible to make the requested updates.

  And finally, always in the firewall section, the two features on the left hand...

  ... "Turn Windows Firewall On or Off" & "Allow A program Through Windows Firewall" on the TWO actions, the error message reads:-"due to a problem not identified, Windows cannot display Windows Firewall settings.

  I think the problems are especially linked, & these are produce because the "Security Center" in the section of the program Services does not exist. It could a virus of one form or another has deleted it.

  I am familiar with computers to a certain extent, but not when it comes to dive deeply into the program. With 'step by step' instructions when it comes to bios & register (I was at a time when looking for something that I had to look for), should be no problem.

  Any help, advice or assistance that can be offered, would be welcome, and appreciated.

  Thank you, in advance for your help.

  Yours Sincerely

  cw63

  p.s. isn't the computer, I'm trying to sort my own. I have an Asus nice execution 8.1 Win

  Colin,

  Thank you for keeping us posted.

  I wish that refer you to the first article, but also the response of the second -

  http://support.Microsoft.com/kb/2519899/en-us#top

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/Vista-Home-Premium-Security-Center-service-is/b04734b6-Deab-44D7-aa2c-0d73149daf21

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Back up the registry - http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  We know if that helps you.