Camileo P30 - broken once again SD card

Similar Questions

• Camileo P30 - SD card does not work

  Sorry for my bad English,
  I just got a Camileo P30 and a memory card SD 2 GB Kingston.

  I used the card on my camera, I took a lot of pictures and no problems with this card.
  Now, I start using this SD on the Camileo P30 (I format the card) and I made a few videos, first time, everything was fine.
  A few days later, the video of the camera has been altered (the camera in the menu, show me some yellow icons with the red question mark)

  I decide to format again memory SD card and I made a few other videos (a few minutes), but later I got an error message "memory full".
  I reconnect the camera to the computer but it cannot prepare the SD memory card, and now, the card is broken the camera can not more read and computer too.
  I lost my memory card SD and all my videos :-(

  Can anyone suggest something or someone has problems too.
  Please let me know.
  It is a very bad start with this new camera.

  Thank you
  Carlo

  Yes, I agree with shudman
  Looks like a defective SD card that caused this problem.
  There are several manufacturers of different SD cards on the market which guarantees a different quality and different SD cards
  I recommend reading some reports to test the product and buy a good quality SD card.

  Good bye

• Camileo P30 does not work when the 8 GB SDHC card is inserted

  Hello
  I just got a new camcorder Camileo P30.
  I also bought a card 8 GB class SDHC 6 100 'Lexar Premium' x
  And it does not work with the card inserted.

  Here are the symptoms:
  (1) when the card is not inserted I can do everything OK - take pictures and video, use the menus, it turn on and off.
  (2) when the card is inserted, the following occurs:
  2.1) I can't take pictures or video - it does not meet the pressed buttons.
  2.2) I can't access menus.
  2.3) I can't shut off again.
  2.4) I do not identify the amount of memory is available (shows only 0 recording time remaining).
  (3) I have tried different combinations of:
  3.1) Insert the card so that the camera is turned off.
  3.2) Insert the card so that the camera is turned on
  3.3) Insert the card while the device is switched on and in one of the menus.
  (4) the camera doesn't always work if I take the card again.

  During these expriments (#3), I was sometimes able to get a record time correct left (#2.4), but still #2.1 to 2.3 # were a problem.
  At one point, I was also able to "format" the card and subsequently, he showed a record very long time available (not matching only not to the size of the map) and #2.1 to 2.3 # were still in force (i.e. I couldn't use the camera or turn it off).

  Note to work around the #2.3 I took the battery.

  I was not yet looking for updated firmware, or connect it to the PC.

  Has anyone of you has met with such a problem?
  What did you do to solve it?

  Thank you.

  Hello

  Have you tried another card SDHC?
  I m not very well what is happening here, but I recommend you another card in this camcorder.
  I m P30 not owner but I have a: 30 and the camcorder reads without problems for 16 GB SDHC card. It works perfectly.

• Camcorder Camileo P30 SD supports SDHC cards

  Hello

  I'll buy this model. I need to know.
  Camcorder Camileo P30 SD supports SDHC cards?

  Can I use 8 GB SDHC card in this product?

  Please advice.

  Hello

  I m not a Camileo P30 owner, but a friend of mine has one and use a 8 GB SanDisk SDHC card without any problems.
  For the Camileo P30 supports SDHC cards.

  Somewhere in the Internet, I read that the camera supports SDHC up to 32GB cards.

• Toshiba Camileo P30 Camcoder won't turn on

  Hello.

  I bought a Camileo P30 in Hungary.It ago 3 weeks worked well all the time.
  But, yesterday, I captured a few videos, and the battery was already empty. So I went to plug in the charger. And when I did, I noticed that when he was in charge, the flash on the camera is twinkled slower that it always does. And it's annoying 'click' sound.

  Well, I didn't really like this topic, and let it load for hours. After a long period, he has not finished loading. So I plugged it in and I tried, but he wouldn't turn it on. :(
  Shortly after, I plugged it into the charger, and after a few hours, I plugged off the coast and did not also.

  Does anyone have this problem?
  What could I do with it?
  Thank you.

  Hello

  Hmm, looks like a malfunction of the cam.
  Have you tried removing the battery and wait a few hours?
  Do this!

  My cam (from another manufacturer) will not illuminate.
  I removed the battery and disconnect the adaptor as well. Then I waited one night long and then checked this once again... then I could turn on the cam.

  But of course, in the worst case, it could be a hardware malfunction

• Problems to record sound on Camileo P30

  Hello

  I bought the Toshiba Camileo P30 camera everything ok, except for one, and it's annoying.
  When you look at it, the sound of frequency in seconds still written and the growing noise that dramatically interrupted...

  And then a little cleaner sound and again increases the noise. Its terrible.

  If it somehow to correct. Can help rewrite the device flexible, if possible.
  Is there a service center in Samara in Russia?

  Thanks for the reply

  I don't really know what the problem is here, but you need to do is to contact the dealer where you purchased this camera and ask for help.
  Maybe they can offer you replacement and you can test it with new cam.

• Brand new Camileo P30 simply will not connect!

  Hello, today I bought a Camileo P30. The battery is connected to the inside.
  I plugged in the charger and the charger to the sector.
  The bright yellow turn on immediately, but IT DOES NOT BLINK.
  Just on a few minutes then it turns off.
  I imagined that the battery is already charged but pressing down the power switch
  for a few seconds, nothing happens.
  I left the charger attached for a few hours, but nothing happens.
  Is it broken? or have I missed something really special, hidden to operate the device?
  m.

  The fixed.
  There is an undocumented, the beast, the thing in the manual "getting started."
  the battery has a small, transparent joint. I found it already plugged in the device
  so it was impossible to see...
  OK, I've lost two hours of my life

• If my software update of the Appstore stops to say 1.3 GB of 6.4 GB due to network etc problem it back once again to 1.3 GB rear or all the way from scratch

  If my software update of the Appstore stops to say 1.3 GB of 6.4 GB due to network etc problem it back once again to 1.3 GB rear or all the way from scratch.

  Hello Anshul230499,

  Thank you for using communities of Apple Support.

  If a download was interrupted in the Mac App Store, then whenever you have new Internet download should then restart.

  If a download application is interrupted

  Once an Internet connection is restored, your purchased downloads should restart automatically. The Mac App Store may warn you that there is a problem with the download and ask if you want to restart downloads. Confirming will restart all pending downloads.

  Download time may vary according to the size of the file and the speed of your Internet connection. See this article on purchases made on iTunes Store for more information on the time to download large files.

  Troubleshooting the Mac App Store

  Take care.

• the blocked sites listed in options disappear when the browser is closed. have to list them all once again, if I want to disturb.

  Listed in a short list of sites from where I want Firefox blocks cookies (doubleclick, for example), following the instructions on https://support.mozilla.com/en-US/kb/Enabling%20and%20disabling%20cookies. However, when I close the browser, the next time I open it, the list is empty. Of course, I get cookies from the sites I want to block.

  Hello

  You may need to disable the Preferences of Site in (Alt + T) Tools > Options > Privacy > settings. Please also see that.

  ...............................................................................................................................

  Useful links:

  Everything on tools > Options

  Beyond the tools > Options - about: config

  Subject: config entries

  Which is preferably that? module -quickly decode about: config entries - after installation, go inside on: config, right-click preferably, enable (check) results of MozillaZine Board, and once again right-click a pref and choose MozillaZine reference first.

  Keyboard shortcuts

  Files & Firefox profile folder

  Safe mode

  Problematic Extensions/add-ons custom

  Troubleshooting Extensions and themes

• State Bar has disappeared, once again (November 9, 2011)

  After a few updates, today disappeared from my status bar, once again, and I can't understand how to get it back. I had status-4-Ever forever, but it's been so long that it happened that I'm not sure what to do. I messed around with it several times and restarted Firefox, but it is not it.

  "Ctr /" is the shortcut to activate the module bar, and it's the same as the view > toolbars > (check | uncheck) the module bar.

• I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  Hello Varshil07,

  Thank you for using communities of Apple Support.

  If I understand your message, by updating your Mac you have forced stop, or you have closed the lid, and now it does not start.  To start, I suggest that try you to start in safe mode by following the instructions below.  For later use, it's a good idea to not force the computer to shut down or close the lid while it is up to date, because it can cause problems.

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Have a good.

• HP Pavilion 15 laptop: Short hard drive DST check failure... once again.

  A question that I had resolved a few months ago started occurring again, in which the laptop is struggling to load things when started and soon after falls down and has to be restarted. I guess that means that the hard drive has failed once again and so I have no doubt about how to solve this problem, but I write this query to ask: why? Why has a laptop, I had since not even a year at this stage has already had the same problem occur twice, even with the replacement of the piece that broke the first time? I am willing to assume that this is something to do with excessive I will admit that it is enabled for a good part of almost every day, often for several hours I play the games on Steam on it. Currently, I do not plan to have the hard drive replaced again because it is clearly an issue that will keep occurring that the way things are and if I can get a PC that won't break every time a gust of wind so it hits. Any information on why this happens and how it could potentially be avoided in the future is appreciated, especially if it offers a solution that doesn't involve payment of an exorbitant amount of money.

  The worst enemy of hard drives is heat. If you play on a computer that is pushed to the limits of the game, a lot of it can wear on a hard drive for a few months. You get a lot of activity of fan during the game? A cooling pad may be an option, or on a computer box of Grandpa instead of a laptop for the games.

• I have a 6 and when I said an iMessage that he will tell me when the person read it then it will say delivered once again so I don't know when it was read

  I have a 6 more and when I send an iMessage he tells me when the person read it then it will say delivered once again so I don't know when it was read

  I have exactly the same problem since I updated to 9.3, the 9.3.1 update didn't fix either. Apple support think it could be a software problem or operations and I have tried literally everything! Have you found a solution for this yet?

• Camileo P30 no sound on Youtube video

  Received a Camileo P30. I load my first YouTube video, but no sound was loaded.

  Have you checked file on the laptop and the sound is fine.

  Thank you

  Maybe you need to encode videos in the right formats and supported.
  Recommend that you check the youtube faq and Info for this page.

• Knowing firmware Camileo P30

  Is there a way to know the Camileo P30 firmware?
  Someone had written... Press record and Zoom upward... nothing happens
  Maybe go to a few menus first?
  Is there anything else you can do with shortcuts?
  Maybe the hidden menus?

  I found... Here is how to activate the FlashCam

  Enter the menu movie / pictures and hold (last frets 'play') and zoom to the top...

  My company is:
  7020 HAS 9 * L - B *.
  D34T-Toshiba - 11 L-PAL
  A2S-SDK331 - 090508.0556
  090619 22:58:03
  D:1, L: 1