Camileo S10 records recording in AVI format

Similar Questions

• Camileo S10 - record 16: 9 FULL HD

  I have the same problem with a friend * rodarko * ([m-169634]). I saw that his thread, but no one since now you have a solution. I will try to describe my exact problem.

  When I record in 16:9 full HD, everything looks ok. But when I try to play on my computer with Arcsoft drive, some files are read 16:9 and other 4:3 are played.

  I did a lot of tryies, but the only thing I found out, it's usually files that may not work on the 16:9 format, the first 5 I save. So, if I save 4 or 5 or 6 (I don't know why) the files, then the following files can be played on 16:9.
  This is not happens all the time. My camera is Camileo S10 and my Kingston 8 GB HC card (SD6 / 8GB).
  I do not wanter why TOSHIBA didn't find any solution and of course I do not wanter why they put the following message (this thread is locked - replies are not allowed). on the same response from the user rodarko!

  Sort it please if you know anything give me an answer. Thank you

  Hello Boisvert,

  I am also a user of the S10. I've done 10 movies in Full HD and watched them then on my laptop.
  All movie files were held in the same format (4:3).
  I recorded in 'normal' and 'macro' - mode, with a SD and SDHC-card and there is no difference.
  I played the files with the player and Arcsoft with VLC Player and both played all files in 4:3.

  Were done, you've played your files? On the screen of a laptop or screen connected to the computer (DVI, VGA or HDMI)?
  Have you tried to read files with another player (VLC or something else)?

  Best regards

• Camileo S10 freeze everytime I try to record videos

  I just bought the Camileo S10 and it does everything just for me. Everytime I try to record video, it freezes just straight up. All the buttons are non-functional, and the only way to turn it off, is to remove the battery!

  I tried it without any SD card in it, with a 4 GB Kingston and a Kingston 512 MB. Nothing works!

  All the great ideas for this problem?

  Hey Buddy,

  I m really been wondering about this. I can't believe t such a question on my TV camera.

  Have you checked the Web from Toshiba site for an update of the firmware? If this is not the case to do this and install this update if it s is available.

  If not, contact a service provider authorized in your country. Guys can check your camera and try to help you.

• Camileo S10 - to record a movie without screen flipping?

  I would like to know if it is possible to record a movie with Toshiba Camileo S10 without flipping screen?

  Hello

  What do you mean exactly by without screen flipping?
  Do you want to save the movies upside down or what?

  Could you explain what you want to do or post more details?

• noise problem Windows movie maker 2.6 when recording in dv - avi format

  I installed the filmmaker windows 2.6 on windows 7 Home premium. Everything works fine. When I try to record the final film in DV - AVI format, I get 5-7 seconds of noise very high height introduced where ever there is a change of clip. IE if I have 10 different clips in my film, I get this noise at 10 different locations in my last recorded movie. These are the places where begins a new clip. There is no such noise present when I play the project in movie maker is not present in the original source file (which is an avi file).

  Interestingly, when I save the movie in any format as DV - AVI, (IE high video quality, local playback or any wmv file) there is no such noise introduced in the final movie. I used the same clips to make the final movie in windows xp using movie maker 2.1 and there was no question also in the recorded final DV - AVI movie.

  So the problem seems to be only on movie maker 2.6 on windows 7, when recording in DV - AVI format (all other formats of work correctly). Clips of same worked well on movie maker 2.1 on windows XP, when recording in DV - AVI format.

  I suspect that the video filters (in tools-> options) could be the reason. I checked and all active video filters are those in C/windows/SYSWOW64 directory, so there is no non-microsoft video filter.

  Pls help as windows live movie maker (installed on windows 7) all blocks left and right and is basically useless because it can't record any movie to the end. Director of Windows 2.1 was the best choice, but it cannot be installed on windows 7. I can download the video to show what kind of flicker noise is there at the beginning of each clip. It is a volume high, shrill noise as if two things are rubbing against each other.

  I installed the filmmaker windows 2.6 on windows 7 Home premium. Everything works fine. When I try to record the final film in DV - AVI format, I get 5-7 seconds of noise very high height introduced where ever there is a change of clip. IE if I have 10 different clips in my film, I get this noise at 10 different locations in my last recorded movie. These are the places where begins a new clip. There is no such noise present when I play the project in movie maker is not present in the original source file (which is an avi file).

  Interestingly, when I save the movie in any format as DV - AVI, (IE high video quality, local playback or any wmv file) there is no such noise introduced in the final movie. I used the same clips to make the final movie in windows xp using movie maker 2.1 and there was no question also in the recorded final DV - AVI movie.

  So the problem seems to be only on movie maker 2.6 on windows 7, when recording in DV - AVI format (all other formats of work correctly). Clips of same worked well on movie maker 2.1 on windows XP, when recording in DV - AVI format.

  I suspect that the video filters (in tools-> options) could be the reason. I checked and all active video filters are those in C/windows/SYSWOW64 directory, so there is no non-microsoft video filter.

  Pls help as windows live movie maker (installed on windows 7) all blocks left and right and is basically useless because it can't record any movie to the end. Director of Windows 2.1 was the best choice, but it cannot be installed on windows 7. I can download the video to show what kind of flicker noise is there at the beginning of each clip. It is a volume high, shrill noise as if two things are rubbing against each other.

  ======================================
  There are many different types of AVI files and some
  can be problematic in Movie Maker. Conversion in
  Before you import into Movie Maker WMV can be
  is worth a try and it might be interesting to try to use the
  Version Vista Movie Maker 6 (it is a better application):

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Vista Windows Movie Maker Installer for Windows 7
  http://noeld.com/programs.asp?cat=video#wmminst

• Camileo S10 erases all images

  Hello.
  When a select erase an image, the device clears all photos. He has been twice, so I think that something is wrong in the firmware!
  y at - it an update of the firmware of our Camileo S10?
  Concerning

  Hello

  I didn t find updates the firmware on page Toshiba unlike any new firmware has been released for the Camileo S10.

  But are you sure you used a proper procedure to remove the single movie?
  The user manual says:

  (1) use up/down to select the delete option
  (2) button press OK to get the Delete menu
  (3) use the left/right keys to select the movie
  (4) use button to delete all the films or the down button to remove the unique animation. OR the record/play button to exit
  (5) before the film is deleted, a confirmation screen will appear
  (6) button press OK to validate the setting

  Note: If a memory card is inserted, you can delete only the movies stored on the card
  Movies on a map written protected memory cannot be deleted!
  The function delete erases only unlocked movies. Locked movies must be released before it will be deleted!

• Camileo S10 does not

  Hello

  last week, I found my old camileo s10 that I him have not used for a year or two, so I guess the battery was completely dead and unusable.

  However I found a charger that has mounted the camcorder, it may not have been that which is expected but when it is plugged into an outlet an orange light appears around the record button.

  However, after charging for two days in a row, the camcorder appears not functional even if the orange light remains constant when charging.

  If anyone can offer a solution to this problem, or is my camcorder simply dysfunctional because of the long period of unused remaining time? Thanks for any help.

  I put t see many options here

  If the battery is OK, it should be possible to load.
  The camcorder must be decommissioned: flashing light confirms the load, but the light is constant when the load was over.

  In your case, it might be possible that the battery is defective and, therefore, it of not possible to load.
  Maybe you should try the new battery

• Problem loading Camileo S10

  Hi all users of Toshiba!

  I just bought a camera, Camileo S10, and it seems apretty nice, small and light. But he does not seem to charge the battery, or power on. Here's how I did:

  (1) I removed the insulation of the battery and put it again, the closure case.
  (2) I plugged it with its own charger, using the USB connector.
  (3) the LED ring around the "Record" button will light up (but flashes as stated in the manual).
  (4) when 5 minutes pass, the LED turns off and never turns on again.

  Is this a normal behavior? Because when I try to turn on the camera, there simply nothing. I tried to reverse the LCD and also tried with the power button, with unplugged USB charger. Device does not react. When I turn on with charger plugged works correctly.

  Thanks for your help!

  Post edited by: m0sk4

  Hello

  The new battery is completely empty!
  Therefore, you must leave the battery connected to the power supply for a long time.

  In addition computer will not charge the battery when it is connected. You should ONLY use the provided AC charger! Camcorder must be decommissioned; flashing light confirms the load but the light is constant when the load was over!

• AVI format not recognized by Windows Movie Maker and Windows Media Player

  HI, I use the Camileo S10. Download AVI files to PC (Vista) and openness to all ArcSoftw goes well.
  I want to edit the films widely and must use Movie Maker for that. This AVI format used by Toshiba is not recognized. I tried several Codecs but my last hope lies with Toshiba to supply a Codec compatible Vista that works.

  Please provide a Codec for Movie Maker to AVI from Toshiba format...

  Hello

  Microsoft Movie Maker supports wmv format.
  If you want to change other formats, then you must use the option: import video.
  This will help import videos saved in another format.

  Otherwise, you need to install a free tool to convert avi to mpg.
  You can then use the Movie Maker for editing video.

• Camileo S10 clicks in sound and in drops in volume

  Hello

  Yesterday, I bought the Toshiba Camileo S10 camcorder.
  Everything seems to work fine apart from the sound which is unacceptable.

  Here's the problem:

  I record a video on playback on my computer the pop sound every now and then randomly and enjoys different each time (left and right) speakers, the sound becomes weak and then returns to its original volume. As it is limited in some way but with a very fast attack that causes artifacts.

  This happens in all the videos I shot and what worries me the most, is that I saw a lot of S10 videos on youtube that have exactly the same problem with the sound.

  One example is this video:

  http://www.YouTube.com/watch?v=JDKo_bI4Qso&feature=related

  Notice how the sound get clicky and drops in volume at random in the left or right channel.

  Please let me know if there is a way to avoid this, as it clearly seems to be a common symptom of the S10. If there is no way to avoid it would certainly go back there. Audio quality is simply unacceptable. Even my mobile phone has the best sound quality. I don't really like the quality it's clicks and drops in the volume which concern me.

  Thank you in advance.

  Hello

  One of my friends owns a Camileo camcorder and I have a Camielo Pro camcorder as well.
  I recorded a lot of videos and to be honest I didn t notice all her questions.
  The sound was recorded correctly.

  Of course, I could edit movies recorded using some video editing applications.
  I m using Nero and some plug-ins to create a movie and burn it on CD or DVD.

  So if you really have problems during video recording you must contact an ASP for a check.

• Camileo S10 - how to avoid the 'information' during video playback on TV

  I just received my Camileo S10... very nice indeed... but how to avoid the track and reading data to be shown on the screen during playback on my TV...?

  Go to the movies, then before you start playing click the OK button. This also works when you save. You must do this before playing or recording.

• Cannot store basic Camileo S10 and P30 configurations

  Hello, first post for me. I got a Camileo S10 and changed with a Camileo P30, and on the two camera, I can't record some basic configurations. I have to put every time that use of the camera. By example, if I activate the stabilizer in 720 p, at a filming of a video, as someone close to the camera, 5 min later I have to ashoot another video, I always have to go into the settings and re-setup stabilizing, because this setting are not stored, while the 720 p stay stored configuration. Same thing for the photo shoot, where of the light conditions and so on must be set each time. It's very annoying, and I can't ask my son to not to move to get a picture, if everytime I open the camera I have to redo the configurations... I'm doing something wrong here? Is there a way to save configurations, as in most normal and camcorder camera?

  Thank you very much

  Lillo

  Hello

  I contacted my friend because he has the same cam. I ve asked him to check this.

  He told me that this stabilization can be used in HD recording and it can be used by the registration with a lower resolution only.
  Another thing:
  Did you put the battery inside and full load?
  What's with the time and data? Is always shown the right one?

• How to set permanent stabilization in Camileo S10

  Hi all!

  I would like to know, how to set permanently stabilization in Camileo S10.

  Thank you.

  Hello

  If you are in the record menu press the OK button.
  In the video mode menu, you must change the stabilization of off to on. Then press the OK key to validate the settings.

  But don t forget the support of stabilization doesn t HD (1080 p) and WVGA (60 fps).

  Welcome them

• How to save a movie on a mwv or avi format?

  When you try to save a finished movie, I'm redirected to the MVF format.  How to save constantly a film about mwv or avi format?

  Are you using Movie Maker? Depends on what Version...

  (1) Windows XP Movie Maker 2.1...

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  XP Windows Movie Maker 2.1...
  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  (2) Windows Vista Movie Maker 6:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html

  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  (3) Windows Live Movie Maker (DV - AVI is not an option in this version)

  How to save the project in Windows Live Movie Maker to WMV Format
  http://www.YouTube.com/watch?v=ZyqZm5MBc7o

• Re: Camileo S10 - very slow when the SD card is in.

  My Camileo S10 was working fine for months with my 8 GB ScanDisk Ultra II memory card.
  Now, when I start the camera, it is very slow to start and operate (a few second delay for each operations).

  When I remove the card SD and trun on the camera, it works fine.

  Is this a known issue?
  An idea for me?

  Thank you.

  Hello

  For me, it looks like a problem with the SD card inserted.
  I think you should try to format the card CD and it should check again.
  If this will not help and you won't see a performance improvement you should replace the SD card and should try another.

  Welcome them