Can barely hear my voice on the burned project.

Similar Questions

• My sound to my helmet began to fade, and now I can barely hear a thing

  Original title: a change suddenly in the sound for headphones

  My sound to my helmet began to fade, and now I can barely hear a thing, especially the voice. What was wrong. Please help me.

  Is the audio remains moderate when you use the Test feature in the default playback devices?

  Do a right-click the sound icon in the notification area and select the playback device, right click on your device and choose Test. In addition, you can try clicking on configure and make sure the camera is set to stereo.

• Audio volume is at 100% but can barely hear the speakers. Help?

  Audio volume is at 100% but can barely hear the speakers. Help?

  Please read this blog to find out how to troubleshoot audio http://blogs.technet.com/b/mediaq/archive/2015/07/30/windows_2d00_10_2d00_audio_2d00_troubleshooting_2d00_tips.aspx

• BBM BBM voice - can not hear each other for the first 5 seconds

  Hey. Has anyone else noticed that on BBM (Q10 10.3) calls iPhone BBM, you sometimes can not hear each other for the first five seconds? Don't know if it's in the app or data connection or what...

  J.

  I just recently noticed that he actually said 'connection '. "during about 5 + seconds. So it's ok, I guess I'll wait five seconds.

• all options are at maximum volume, but I can barely hear computer speakers, the modules are very well.

  Used for acceptable sound from computer speakers, now I can barely tell if someone speaks. Plug-ins and headphones work fine. I checked that all orders are at maximum volume, no help. Any suggestions?

  Hello

  1. were all changes to the system before the show?

  2. deal with the issue with applications or specific?

  3. the speaker works fine on other computers?

  Try the next step and check if that helps.

  Click on the below link to get the procedure run the audio troubleshooter for fox common audio problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Hope the helps of information.

• Built-in microphones don't work, rough, background noise, can barely hear voice

  can someone help with this problem?

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• My volume is all the way, but can barely hear any sound.

  I was in properties managed to lose almost all my sounds and audio. I know, I know... not difficult if it's not broken... one of these things in retrospect, I guess...

  Hi Sandy391,

  Follow the steps listed in the following Microsoft Knowledge base article:

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Skype on Sierra - after 12 seconds of appeal stands - I can't hear your voice.

  Hello

  I have a big problem with my Skype.

  After that 12 seconds of appeal stands - I do not hear voices, but my client hear me.

  I run echotest, but even call echotest of break after 12 seconds.

  The steps:

  Uninstalled SKYPE cleaner and installed the latest version - did not help.
  I uninstalled Skype cleaner installed an older version - it did not help.
  I changed the method / extra internet connection (cable and my LTE network)-did not help.
  I changed the settings, turn off and turned on the macbook, nothing--has not helped.

  Sorry for my bad English.
  Help, please.

  Best regards

  Simon

  I've solved a problem!
  Problem was in the firewall settings!
  Turn it off completely for a while. It helped!
  
  Topic that you closed.
  
  * For those who have problems:
  Please check your firewall settings after the update of the Sierra.

• Can't hear music transferred from the old hard drive

  original title: unfortunately I had to buy a new computer & external drive, all media was transferred, but now I have the rights for nothing which was torn off of CD over the last 10 years... any solution?

  I had this problem once before and I was able to email Microsoft my problem, and rights have been restored.  But I'm not that easy solution this time.  Does anyone else have this problem?

  I had this problem once before and I was able to email Microsoft my problem, and rights have been restored.  But I'm not that easy solution this time.  Does anyone else have this problem?

  Hi Crams.on.2nd,

  Sorry for the inconvenience, fortunately there is an easy solution to your problem that will give you the back control of your files.
  1. go to the folder where the files are that your be locked
  
  
  2. right click on the folder and select "Properties" at the bottom of the drop down.
  
  
  3. the switch to the 'Security' tab, to the appearance of the background of a button that says something like 'Take ownership of the files' text may differ based on your version of windows.
  
  
  4. follow the instructions and click on your administrator account to the account listed.
  
  
  5. check the box that says 'Total control' then click on 'Apply' or 'Apply Changes '.
  
  
  6. just do it with the rest of the files that you cannot access and you can re - take control files
  
  
  (Make sure you check "Apply to subfolders and files" on the application of the authorization for your account for reasons of convenience more.)
  
  
  7. your done! If you did everything right you will now be in control of your old files and be able to do what you want with them again!
  
  
  If the problem persists or you will find difficult to follow instructions just let me know and I'll give more detailed instructions :)
  Thanks for your time, hope this helps.
  -Ian

• How can I produce two outputs of the same project

  Dear Sir.
  
  My goal is to produce the two outputs of the same main project, Webhelp and HTML help, each of them will be used differently in my compnay.
  
  Producing two outputs is fine, but the problem was that external links are done differently for HTML help and Webhelp and as I Knew about you that can be solved by using conditional tags.
  
  Actually I am new to conditional tags and I don't know how to use them. Could you please help me to do this or recommend a link on how to use condtional tags to produce different outputs.
  
  Thank you very much
  
  

  Hi there ahlam323

  See if the link below helps everything. Some goober wrote something on it.

  Click here to read the goober guide

  See you soon... Rick

• Can we have two textures for the same project?

  Hi all

  I use Captivate4. In my project, the transparency of the background for reading bar controls is 100%. If the texture would be considered to be the background of the PlayBar. I have a requirement to hide the commands of reading in a few slides. Then I would change my texture to another image. In short, I want to show a single texture when the play bar is visible and another texture when the play bar is invisible.

  Is this possible?

  Thank you and best regards,

  Kartik.

  In Captivate 4, to achieve something like this, you must use a picture placed on the layer immediately above your background layer with your PlayBar in the overlay mode.  Then turn off your PlayBar would reveal the image below instead.

• I can't hear the sound on I phone after update

  After update to the last version on my Iphone 5, I can barely hear when someone calls. To use, I have to select the speaker.

  Try the procedure described in this article:

  If you hear no sound or distorted sound from your iPhone, iPad or iPod touch speaker - Apple Support

  If this does not help, follow the last step on contact the Apple Support or make an appointment at a Genius Bar in the local Apple Store.

• The speaker volume in the computer sound control mixer is up and works well with the speakers, but with headphones, I can hardly hear.

  Original title: the headphone volume

  How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear

  Hello
   
  1. who is the operating system installed on the computer?
  2. What is the brand and model of headphones?
  3A this works much earlier?
  4. What is the brand and model of the sound card?
  5. have you ever tried to play the Audio using different media player applications and check?
  6. have you tried to connect the headset to another computer or phone and check if it works well?
   
  I suggest you follow these methods and check.
  Method 1: Run the audio troubleshooter.
  Open the Audio http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter playing convenience store
   
  Method 2: Set the earpiece/microphone as default device and check.
   
  a. right click on the volume icon in the system tray at the right corner on the desktop.
  b. Select the playback device, go to torecording tab.
  c. make a right click and headphone/microphone as the default device.
  d. click on apply and ok.
   
  If above steps fails, proceed to method 3.
   
  Method 3: I suggest to disable the improvements and check.
   
  a. right-click on the icon "speaker" at the bottom right of the screen.
  b. Select "playback devices".
  c. right-click on the helmet.
  d. Select Properties
  e. click improvements
  f. check Disable all improvements
  g. click OK
   
  You can read this article for more information:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems  
  
  You can also contact the manufacturer of headphones and check.
   
  I hope this helps!

• Can't hear playback of mp3 on the storm

  I use the following similar code in my application by one of the poster

  play a sound mp3 on the storm.  The app works very well in the Simulator.

  public void playClick( ) {
  
              try {
                  Class cl = Class.forName("net.berrysoft.dib.Dib");
                  InputStream is = cl.getResourceAsStream("/sounds/switch.mp3");
  
                  // Create an instance of the player from the InputStream
                  player = Manager.createPlayer( is, "audio/mpeg" );
                  player.realize();
  
                  volumeControl = getVolumeControl(player);
  
                  if (volumeControl != null)
                      volumeControl.setLevel(volume);
                  player.prefetch();
                  player.start();
              } catch (Exception e) {
                  System.out.println("ERR: " + e.toString());
              }
      }
  
      private VolumeControl getVolumeControl( Player p ) {
          return (VolumeControl)p.getControl( "VolumeControl" );
      }
  

  the problem is that I can't hear the sound when I plugin the atrium.

  Once I unplug I can't hear anything.

  The sound works on my Storm. I can listen to music with the media app.

  someone knows why?

  THX. I read your responses on the other thread.

  No wonder he has many updates. hehe

  I hope a release very soon because it's very annoying.

• can't control my voice through speakers when recording on windows vista

  Compaq presario cq60 notebook. Can I record my voice without problem, but I can't monitor levels to be either too loud or too soft. I've read dozens of forums and keep running in circles. My table of mixing does not even an option to do so. All devices are enabled and display. I have no line showing as many forums saying I should have under part recording of sounds. You are using windows vista. I want to say is 'I can't hear my voice through my speakers or headphones while I record. What I've read, it's a fairly common problem.

  Hello

  Method 1:

  Open the troubleshooting of Audio recording (also applies to Windows Vista)

  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  Method 2:

  To adjust the record volume, follow these steps before you register:

  1. click on Start, click on Control Panel.
  2. click on hardware and sound.
  3 under his, click Manage audio devices .

  4. click on the recording tab.

  5. click on the microphone device and then click Properties.

  6. click on the tab levels move the slider to increase or decrease the volume.

  If you find difficulties in following the above steps then you must follow the link below.

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is lower than that of Windows XP.

  http://support.Microsoft.com/kb/973446

  Hope this information is useful.