can connect you to game Center, but not games

Similar Questions

• I can connect to the local network, but not to the internet

  Why in an internet connection, I can connect to the Local network, but not to the Internet.
  I have valid IP address and configuration is good.

  I recommend you read some threads here in the forum about similar issues.
  If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
  Using the WiFi network, you must check if the common WLan parameters are favourable;
  Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.

  Good bye

• Can connect to the office/Hotmail but not Live of Skype. .

  Hello

  I can connect my hotmail, and I can see my Skype contacts, but it says my password is wrong if I try to connect to live Skype.

  Using the same account and passowrd, I can connect to Skype from office, but I don't see my contacts.

  Any ideas? Thank you

  http://heartbeat.Skype.com/2015/11/issues_with_skype_login_and_co.html

• Help! I can connect to my neighbors WiFi but not my own!

  I hope that someone can help you. I can connect to my neighbors WiFi without problem, but my own internet connection does not work correctly. If I reboot the modem/router I can connect for about 10 minutes, then he said: "no internet connection" & I get the yellow triangle with the '!' in it... If I open the network and sharing Center and 'Diagnostic' advise me my "Local network doesn't have a valid IP configuration". It does when I use a wired connection and a Wi - Fi connection. Yet if I connect to my neighbors WiFi I have no problem at all.

  I don't know what to do!

  Hi Katy,.
  Follow step 1 in this guide: http://www.selectrealsecurity.com/fix-internet-connection
  If you have any questions, just ask. Let me know if this helps you.
  Brian

• Can connect to internet when wired, but not wireless

  Just restarted my computer laptop and now unable to connect to the internet.via my wireless router. Am connected to the router, but not the router to the internet. Can connect to the internet by a cable in the router to my laptop. The computer identifies the network correctly when it is wired, but shows as not identified during the use of the wireless router. Already fed the moden and router down twice, without change. other phones that I use are able to access the intwrnet via the wireless router, so I think it has to do with the system restart I just did on this laptop. Any ideas would be helpful

  Hello

  You did it all changes on the computer (which is originally this issue) before this problem?

  Read the following article that may help you.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• RV082 with QuickVPN can connect to the Windows Server but not on Ubuntu Server

  We have a RV082 and are capable of using QuickVPN to connect and access our work LAN (192.168.0.0) except that we can not connect to a Linux Ubuntu Server on the local network.  Can ping (and shared access) servers Novell, a Windows 2003 server and several printers but not the linux server.

  192.168.0.1 Novell server can ping

  192.168.0.2 Server Linux ping or you connect

  192.168.0.3 Windows 2003 server can ping and connect

  192.168.0.4 - 11 different printers that I can ping and install

  I can ping and connect to the server using PPTP-Linux

  Troubleshooting tips will be greatly appreciated

  Good afternoon

  Review of your question, it would seem at first glance that the Ubuntu Server may be blocking incoming VPN traffic. I'm not sure of what firewall program you have chosen to use with your server Ubuntu, but make sure the ports 500, 4500, 443 and 60443 are open to traffic entering this subnet. If you can detect all the errors showing blocked traffic trying to hit the server, which can be useful in allowing us to determine why this traffic does not go through.

  Thank you

  -Lindsey

• connection problem: can identify you as a system, but not as "Admin".

  Hello
  I have 10,2,0,4 and Apex 312. New installation. For some reason any may not know what is the problem - I can not log in as admin (despite my shopping apxchpwd.sql) I get the message "not authorized".
  At the same time, I can get as a 'system '.
  I connect to the server: 8080 /.
  and, when using the 'system', I see xdb:
  
  Index of /.
  Modified name size
  Home / Monday, December 10, 2007 02:15:56 GMT
  -i / Saturday, November 29, 2008 07:49:35 GMT
  -public / Thu, 16 November 2006 18:59:31 GMT
  -sys / Monday, December 10, 2007 02:15:54 GMT
  -xdbconfig.xml Saturday, November 29, 2008 07:49:51 GMT
  
  Please notify.

  Andrey:

  Please read the section on choosing an HTTP Server appropriate for your installation of APEX

  http://download.Oracle.com/docs/CD/E10513_01/doc/install.310/e10496/overview.htm#insertedID4

  As far as I know, the embedded PL/SQL gateway will not work with the version of the Oracle database server that your have installed in APEX. You will need to download and configure the Oracle HTTP server.

  CITY

• Can connect to the wireless router, but not to the Internet

  Because I could not find this post, I published in my problem to

  Windows 7, connecting Local only, no Internet

  I think I described the problem a bit better here.

  I had a Gateway DX4300-17 with Windows 7 Home Premium for about six weeks. I connect to the Internet via a Netgear wireless router. My Internet connection dropped often, but I've always been able to reconnect to the Saturday. Since the start-up my computer Sunday, when I try to connect to the Internet, the system tells me that I am connected to the router, but there is no connection between the router and the Internet. I did a system restore to Friday, but it did not help. I searched the Knowledge Base and tried several things I found there. Running "sfc/scannow" indicates that all is well. I disabled the '6' Protocol (I don't remember the letters that were with this, but you probably know what I mean). This made no difference either. I thought I would ask for help here in the hopes of not having to restart the computer to the "hospital". That's a very different problem here barely a week. I need help, please.

  Hello Bill6009,

  Have you tried to boot your computer in SafeMode w/network to see if the problem persists?

  If so, try to perform a clean boot to see if you encounter the same problem.

  Please post back your results if we can help get your problem solved J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I can't scroll through sites that I connect. something happened in mozilla firefox. It allows to work when I am connected to a Web page, but not now. all I can do is

  I can't scroll through sites that I connect. something happened in Firefox Mozilla. He used to work when I am connected to a Web page, but not now. all I can do is to manipulate the page through links on the page. No sidebar to scroll or the other. It works fine in Explorer, so I know it's a problem with Firefox, also can scroll etc on pages like MSN, Yahoo, etc., but does not not using Firefox, when I connect to one Web site other than the one which is also a search engine, what happened? can you help me?

  You get a pop-up window or dialog style without menu or the toolbar either? In this case:

  38 of Firefox has a little problem with this combination of circumstances:

  (1) turned off tabbed browsing
  (2) viewing a page in a private window
  (3) you click on a link encoded with target = "_blank", which launches the link in a new window

  The new window opens without menus, toolbar, scroll bars, etc.

  Work on this bug is in progress, but I don't know if the fix will be available in the coming weeks. These are the known workarounds so you can continue using windows browsing private - one of them will work around the bug:

  (1) use tabbed browsing (there is a checkbox in Options > general > "Open new windows in a new tab instead");

  (2) shift + click the links to open in a new window with standard features. or

  (3) change a bunch of hidden settings as explained below - it will not you make changes to the way you use Firefox, but sometimes you need to enlarge some small pop-up windows that have been sized for a window with no toolbar displayed.

  # 3, here are the steps:

  (A) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (B) in the search above the list box, type or paste feat and make a pause so that the list is filtered

  (C) for each preference that begins with dom.disable_window_open_feature. , if it is not 'true', double-click it to true.

  You may find that you prefer this anyway, given that sites can band is more these pop-up windows features.

  Who is relevant or do you have a different question?

• I can connect to my home network, but all the other networks do not work...

  I can connect to my home network, but all the other networks do not work... Error window says:

  Windows could not connect to the (X)? network name?

  [Link] Solve problems

  [Link] Learn more about Internet connection problems

  I gave security, uninstalled reinstalled wireless - uninstall security firewall reinstall and not go...

  Windows 7

  Hello

   
  1. What network are you trying to connect to?
  2. You are not able to connect to the Internet?
  3. Are you able to connect to the other network with wired network?
   
  Try the methods provided and check.
   
  Method 1:
  Check out the link and follow the steps.
  What is network discovery?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery
   
  Method 2:
  Check out the link and run the troubleshooter.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 3:
  Reset the TCP/IP and check. Check out the link and follow the steps.
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows
   
  Method 4:
  Check out the links and check out them.
  http://Windows.Microsoft.com/is-is/Windows7/cant-connect-to-a-network

  http://Windows.Microsoft.com/is-is/Windows7/view-and-connect-to-available-wireless-networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Another reason to hate the Photos app. I want to put titles on the photos that I put in an album to share with others. I can add titles on my MacBook, but not on my iPad Air. I tried to copy the photos from my MacBook to the iPad, but the titles have disa

  Another reason to hate the Photo App. I want to put titles on my photos in an album to explain what are the images. I can do this on my MacBook, but not on my iPad Air. I tried to copy the album (by airdrop) to my iPad, but the titles disappear. Any suggestions?

  Since the Photos of OSX application, select an image (once it's in an album, not in Moments) and you can add a comment that is visible in the Photos of iOS.

• I can connect to windows live hotmail, but I can't open the emails.

  "I can connect to windows live hotmail but I can't open the emails, Server error appears on the screen, but I'm connected to the internet, please help.

  Hello

  You will need to create a post on www.windowslivehelp.com for questions and assistance in connection with the Windows Live programs and services.

  According to the error you found, it may be a known issue, see the following announcement:

  http://windowslivehelp.com/thread.aspx?PostID=5785957e-6007-48a1-85c7-03170a5a4086#5785957e-6007-48a1-85c7-03170a5a4086

• My office will connect to other wireless networks but not my own.

  original title: the internet disorder

  everything in my house is my internet running at home, but for some reason, my desktop connects to the internet outside but not my internet has the House that I don't know what to do?

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows?T1=Tab03

  It will be useful.

• Cannot SSH in vmware player (can use the local IP address but not external IP)

  As above

  Cannot SSH in vmware player (can use the local IP address but not external IP)

  Am new to vmware, so if you need information to help me on what you'll need to tell me how to get

  See you soon

  Vodkaholic27, let me start with the layoff of vodka for a bit and then set Virtual Machine network card to bridged and then assign a static IP address that is appropriate for the guest as the physical LAN operating system is the host.  Then in the local physical network for static IP address router you assigned in the guest OS configure it to allow Port Forwarding on the appropriate port.  Then, you will be able to access from outside local physical host network.  If it's just on the other system on the physical LAN to the host that you want to access the guest you need not set up the Port Forwarding on the router on the local physical host network, simply use linked by a bridge to the network adapter in the Virtual Machine.  If you use NAT to the NIC of the Virtual Machine, then you need to set Port Forwarding in the virtual network Editor.

  Note: The virtual network Editor is not installed by default in Vmware Player 3.x and later versions.

  ==========

  To install the missing virtual network Editor, the command prompt:

  VMware-player-*.exe -e c:\vmptmp
  

  Then in the c:\vmptmp folder find the file c:\vmptmp\network.cab and extract (double-click on the .cab file) vmnetcfg.exe (virtual network editor) file in the working directory of VMware Player usually 'C:\Program VMware Player' or ' C:\Program Files (x 86) \VMware\VMware Player.  You can create a shortcut and place it with the shortcut of VMware Player, if you want to access it more easily.  Note: there are some for all the files to be extracted to then access the network.cab file.