Can Essbase create a cube of data to other cubes recovery?

Similar Questions

• How can I create a logic reports OLAP Cube in AWM

  Hello

  I created several cubes, but now the client wants to have a cube created report so that we can report in a cube. Can someone tell me please to some guidance on how to create a logical cube.  Thanks in advance

  Its a simple idea... a bit like a layer of sql-opinion on the data stored in sql tables.

  I just tape a few points quickly.  If you do not understand it, feel free to post more questions.

  Lets say, you have the following stored cubes where data has been loaded and grouped.

  Designed by DIM1, DIM2 and DIM3, DIM4, TIME CUBE1 (with stored measures meas1x, meas1y, meas1z)

  CUBE2 (with meas2x, meas2y, meas2z stored measures) designed by DIM1, DIM3, DIM5, 6 TIMES

  CUBE3 (with meas3x, meas3y, meas3z stored measures) designed by DIM1, DIM2, DIM3, 6 TIMES

  Now you create a cube considered, lets call it RPT_CUBE

  RPT_CUBE must be dimensioned by all dimensions. This is the important point.

  It will be only calculated measures, NO measurement stored.

  Create a base (calculated) measure in RPT_CUBE that points to a stored measurement.

  So, for the stored measures 9 above, you will have 9 measures calculated in RPT_CUBE.

  Other measures (such as time) will be created by using these basic measures in RPT_CUBE.

  The properties LOOP_DENSE and LOOP_VAR parameters are critical for each measure in RPT_CUBE.  Often that's correct, but I have seen cases, when it is not set correctly, so I had to manually fix these two properties for measurements in my RPT_CUBE.

  When you query RPT_CUBE measures, make sure that WHERE the conditions are met for all dimensions.

  The value of the dimension of topancestor of a hierarchy, if it is not necessary in the query.

• I can manually create partition data recovery CD?

  Hello

  I have a laptop (Satellite Pro) friends who is unable to start in Vista (even in safe mode) with a blue screen. I tried to start my Vista CD to try a windows repair, but even that translates the same blue screen. To cut a long story short, I want to use back to factory default, but the recovery CD were never created.

  I can access the contents of the disc (the C drive and the data partition) to boot from a CD live linux. Is there a way I can copy the files over again the data partition and create a CD/DVD using these files for recovery?

  Thank you very much

  > Is there a way I can copy the files over again the data partition and create a CD/DVD using these files for recovery?
  Lol you can't do that. What you can do now is to restore disc original order of Toshiba.
  Sorry but there is nothing you can do about it.

• Can I create a recovery disc in a drive that already contains data?

  I went through this link "http://windows.microsoft.com/en-in/windows-8/create-usb-recovery-drive".

  It is said that when I create the recovery USB drive, old data in USB will be removed is even a hard drive?

  Can I create the recovery drive into a USB port and which copy to hard drive and use the HDD when necessary for recovery?

  Please help me to understand the working of recovery mechanism in Windows 8.

  Thank you

  Ananth

  Hello

  Yes that is right that the recovery disk is created on a sterile USB drive. Do not put any other data after the creation of the disc of recovery in this matter, otherwise it can not work properly.

  I hope that answers your query, good day!

• All the members (but 1) are removed from the entity dimension in planning and deployed to essbase. -What are the data deleted in essbase so? / The data can be restored by restoring the entity dimension?

  All the members (but 1) are removed from the entity dimension in planning and deployed to essbase.

  -What are the data deleted in essbase so?

  The data can be restored by restoring the entity dimension? EPMA the entity dimension is still in tact.

  It is unclear what exectly arrived, but looks like a change was made in the dimension entity planning (not EPMA) and then deployed (successfully).

  In essbase, we see that the entity dimension has only one member left for the appropriate plan types, as in the planning.

  If you remove members and then push that yes the essbase data is deleted, if you need back then you will need to go back to your restore process.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• How can I create a query with the data control to the web service?

  I need to create a query with the order of web service data, WSDL, it is query operation, there is a message of parameter with possible query criteria and a return message contains the results. I googled but can't find anything on the query with the web service. I can't find a criterion "named" to the data control of web service as normal data control. Blog of Shay, I saw the topics on the update with the data of web service command. How can I create a query with the data control to the web service? Thank you.

  Hello

  This might help

  * 054.     Search form using control data WS ADF and complex of entry types *.

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/index-101235.html

• Can I create two tasks of IA using the same unit of data acquisition?

  Hi all

  Sorry for the question of gumby, but I'm new to all this stuff DAQmx, and I'm trying to understand how it all works.

  I use a USB-6229 with LabVIEW 8.6.1.

  I would use 30 lines HAVE to monitor 30 voltage remote signals.

  I would use the other two lines of AI to perform input voltage independent tasks.

  I tried to create and start the two tasks, but I get an error message when I try to start the second task.  He tells me that the resource is not available.

  What is the cleaner way to configure things working for me?

  Thanks in advance.

  -FB

  Hi diarmaede,

  You can only create one task to HAVE on your card. Read all your DO this card in a loop. You can divide the result and send it to different loops to work on it.

  It will be useful.

  Mike

• The Essbase 11.1.1.2 data through a 11.1.2.1

  All migrated data 11.1.1.2 to 11.1.2.1 Essbase? I built a brand new environment 11.1.2.1. Our old environment running 11.1.1.2. In the outline of the old environment, calc scripts etc. were stored on disk d:\ (d:\Hyperion\products\Essbase\EssbaseServer\app) and the data stored on drive e:\ (e:\Hyperion\products\Essbase\EssbaseServer\app) by using the parameter diskvolumes for the BSO cubes. We have also a few cubes ASO users reported to drive e:\. In the new environment, I installed on drive e:\ essbase, so everything should end up here on a single disc. In the old environment it has been installed on the disk d:\.
  
  Can I create a new app/db on the new server, copy all of the objects on disk d:\ on the new server, export all data and import the new server? I read a little on an essbase, staging of tool. Has anyone, has used up a configuration of two disks for a configuration of a disk? We have also about 600 GB of data in the cube. Is there a limitation of size with this tool?
  
  Thank you.

  Personally I would not recommend copy all the files in this way, if it's a migration then I tend to go for the migration wizard in environmental assessments and to export/import data separately or go down the official road of the upgrade via the path supported.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Maxl Essbase Studio deployment cube

  Hello
  
  I created a Cube Essbase with Essbase Studio. Everything works fine.
  Now I want to plan the deployment of cube (generate contour and load data). I tried to use the maxl deploy like it's statement explained the technical reference to Essbase.
  
  I used the following statement to delete the database and build the outline:
  
  deploy the outline of the model MyModelName with delete_database login admin option identified by password on host localhost.
  
  But everything I got this error message: "error BPM: Parse error near;"
  
  The syntax of my statement should be the same as in the documentation... but I think that is missing a few points as the application name and the database name?
  
  Thanks for the tips!

  Hello

  I also had problems with this. The documentation is not "what it takes for this command. The following example should work:

  deploy the outline of the 'TbcStudioModel' option incremental_load model updated that all preserve data connection 'admin' identified by 'password' on the host 'epmv11112' to database 'TcbStudi' application 'Studio' connect 'epmv11112 ';

  Gee

• How can I create a sync account, without synchronization option?

  I am currently in IE, but firefox running 25.
  I want to synchronize my firefox data.
  However, the problem is, I'm blind and can't create synchronization account, make the captcha.
  I'm under addon web visum, which is to solve a CAPTCHA for me, however, on the creation of sync account, it won't work, because this window is not standard Web interface page.
  The solution will be, if I can create on behalf of synchronization through a web interface, by visiting a page, for example, accounts.mozzilla.org/signup
  I also tried an audio captcha, but its quality so bad, and I do not understand...
  I hope that someone will help.

  Hello agasoft, I'm sorry that the registration process makes it so difficult - as far as I know it is possible to open an account of synchronization within the program of good.

  If you wish, I could also help you set up the account - it would work something like this:

  1. I contacted by personal message and ask your e-mail address.
  2. I created an account and you send the password and the recovery key for the account.
  3. You can then login on the website https://account.services.mozilla.com/ and change the password to your account.
  4. You can connect your firefox for the existing synchronization account by going to firefox > options > synchronization > sync Setup > I have an account > I don't have the camera with me. There, you will have to complete the identification of the account information (address, e-mail, password & recovery key).
  5. Finally if the account is configured, you can then go to firefox > options > synchronization > manage my account > my recovery key. in this window please choose to generate a new recovery key. Please also save the new key to recovery somewhere safe in case you need it in the future...

• Can I create recovery DVDs after installing Windows XP Home edition?

  Hello

  I have a laptop Toshiba Satellite L300. I formatted the c drive and installed windows xp, but soon I realized that I forgot to create a recovery disk.
  Now the F8 does not work, but the drive d and hddrecovery the folder that contains the files of Toshiba recovery still exists. 3.8 GB of data is located in this folder.

  Is it possible to create a recovery disk now. Thanks already.

  Hello

  Recovery DVDs can be created with the special tool only. The name is Toshiba Recovery creator. This tool is part of the Vista installation only factory settings.

  So now, you can not create recovery media and there is no way to launch the installation of F8 HARD drive recovery. I do not understand why you ignored Toshiba reminder on creating recovery DVDs.
  Anyway, you can order the new copy under https://backupmedia.toshiba.eu/landing.aspx

  Bye and good luck!

• How can I use notifications to send data from different sources for the same chart?

  Hello

  I use the model of 'Continuous measurement and logging' project comes with LV 2013.

  It is extremenly helpful in understanding the messaging between the acquisition, graphic and loops of newspaper. (Thank you NEITHER!)

  I ran into a snag though.

  I want to change so that my graphic loop receives notifications of data from two sources of acquisition by the declarant.

  I have trouble getting the data from the two sources to display on one graph.

  I've isolated the problem in the attached vi.

  Here's what happens:

  1. I create 2 parallel loops data and send the data to a third parallel loop with the notifiers.

  2. the third loop receives data from one of the loops because one of the authors of just receiving notifications is to expire instead of receive data.

  Can anyone suggest how can I fix?

  Thank you.

  -Matt

  Here's my modification of your VI. I put notes on the block diagram to explain the changes. He uses a queue for data transfer to avoid data loss. It uses a notifier to stop loops. All local variables and value property nodes have been eliminated.

  The way loops are arrested probably let some data in the queue. No more of one or two iterations of each of the loops of data acquisition. If you need ensure that all data has been displayed (or recorded in a real application), then you must stop acquiring loop first and read the queue until you know it's empty and both other loops stopped. Then stop the render loop and release the queue and the notifier.

  Lynn

• Specified object is not that can be created in my open reference

  I'm having a problem using a type library file.  The file that I use to watch the object I would create as that can be created (that she has a point in front of it and is displayed when I check the box "show only items that can be created")

  

  Yet, when I select the IRemoteInterface2 the reference selected in LabVIEW is the first (IRemoteInterface).

  

  Then, I need to go to the reference, then select the Interface2 as pictured above.

  When you run this I get the error of "Office Open: object specified is not that can be created in Untitled 1".  I wonder if someone understands what is happening with this error.  The type library is registered, and a VB project can use this object... The following VB code:

  Dim WithEvents Remote RemoteInterface
  Dim Remote2 As IRemoteInterface2

  .

  .

  .

  Private Sub Form_Load()
  'create the new RemoteInterface '.
  Remote control = New RemoteInterface ' local
      
  Define Remote2 = Remote

  .

  .

  .

  End Sub

  .

  .

  .

  Remote2.ExecuteScript (strFile)

  .

  .

  .

  Any ideas as to what I can do to access the RemoteInterface2 object

  Thanks for the tip on the use of the variant data to 'convert' or 'access' the other object.  I tried to use the earlier type converter and leading LabVIEW close immediately.  Here's what looks like the solutioin to access both interfaces.

  

• I can not create a restore point.

  When I click on the system, System Properties Protection opens. Is there a way I can turn on the system restore and create a restore mode without failure point?

  Hello

  Why do you want to create a Restore Point?

  What is the problem with your computer?

  And you can not create a Restore Point, today, yesterday, or last week, etc.

  You cannot create a Restore Point in history (previous date and time)

  You can create a Restore Point for today, to use at some point in the future.

  See you soon.

• I can't create a system restore point.

  I can't create a system restore point.  I'm told to group policy won't let me.  I got error 0 x 80070750

  Hello

  Method 1:

  I suggest to run the SFC (SFC scan) system on the computer and then try to create a restoration point and check if it helps.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  I also suggest you to perform check disk (chkdsk) on the computer and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: You may lose any amount of data while performing the check disk.