Can Hi anyone tell me why my music downloaded from disks will not work on moviemaker

Similar Questions

• Restore disk will not work need a windows copy XP where can I find one?

  My hardrive broken so I am new and my restore disk does not work where can I get a version of windows to put it on a floppy disk and use it on my computer OSless.

  XP has disappeared.

  your best bet is to work with the manufacturer of your laptop, maybe they xp on their shelves.

  also, the restore disks may require specialty measures to run for them to be activated.

  so for the two cases above, visit your computers home site and look for the model number of your laptop for the faq on the help of restore disks / recovery discs / factory restore.

  by the way, how broken is the old hard drive?

  He must have a hidden section on it with all the preserved original software which can be used to restore the hard disk.

  but this section could also be copied into the new HDD as well, according to which 'broke' implies.

  by the way, is that the technician who replaced your hard drive take a look at the restore disks too?

• I bought a music download, but it will not itialize; should I change something in my settings?

  I bought a CD Baby music download, but nothing happens when I click on the download button, they sent me. What can I do about it? Is there a problem in my browser settings?

  You can try to copy and paste the link into the address bar to see if it works.

• My imac (El Capitan 10.11.6 - 2 Terabyts) complete and FCPX disk will not work. I moved a few fcpxbundles library to an external hard drive (seagate 2 trabyte) and erased from the iMac. NowFCPX said that missing data as effects therefore can not shar

  Help!  My FCPX (v - 10.2.3) does not work because my iMac drive is full (iMac 21.5 inch has 2 terabyte w / v OS El Capitan 10.11.6) I had tried to free up space by moving tons of files on a usb disk Seagate (2 terabyte) speedboat that barely made a dent. then on the advice of a friend I found (in movies) a file called Final Cut backups. There were 4 files with extension, ".fcpbundle" I have three of them moved to another drive to Seagate usb - they had 2.82 GB, 21.6 GB and GB 68,21 that I thought should be enough and them removed from my iMac drive - bad! It says I have only 13.46 GB free on my 2 terabyte iMac total!

  The fourth fcpbundle it's TB 1.72! But before leaving that I returned and opened FCPX and found the warning triangle around my library... While my last project looked OK I couldn't / the share of exports because the pop-up says FCPX has no data for efx etc (the media looked at and display fine) and cannot be taken out.

  FCPX can work with the "beams" moved to another drive? How the detectable in a new place? Or how to put them back?
  How can I make sure that future packages clutter my iMac again?

  Do I need a RAID disks? If yes which?

  I found other folders in folders 'Make files' and records backup for projects with the .fcpbundle inside files

  How can I get this sucker working again?... and what should I do to keep him from doing the same thing in the future?

  Thank you

  John

  :.. then on the advice of a friend I found a file called Final Cut backups (in movies). There were 4 files with extension, ".fcpbundle" I have three of them moved to another drive to Seagate usb - they had 2.82 GB, 21.6 GB and GB 68,21:

  The backup files are only the database files (no media) and must be low, not gigabytes, do not know what is happening there.

  Media libraries stored in the bundle of FCP X library or stored outside?

  If stored at the breast, called managed media, simply copy and paste the library to a different location.

  Make sure that library books newly located correctly before you remove what either.

  Perhaps check your settings of the library.

  Click the library icon in the browser and it appears in the Inspector:

  

  By clicking on change settings shows this:

  

  Move the mouse over the media and it will reveal the path where things are sent.

  Then you might be able to track down what goes where.

  From you description, it seems that most of the media files and rendered is not be moved successfully.

  Some screenshots would be useful if you can't find where stuff is.

  Al

• Stupid question: why tinytots (and other similar fonts) will not work in Firefox?

  I am a user of Tumblr, if of course if I had to work on a theme, I would like to see the fonts that I have chosen to serve. In Chrome, everything seems as it should usually (relative to the fonts). In Firefox, I respond specifically to these two browsers so my theme seems not completely horrible. In my opinion, only a browsing experience more could be made if Firefox showed fonts such as tinytots for more than just me, but for someone else who is perhaps not brave enough to post about it. This brings me to another question: I'm just ranting or is it possible I can see these fonts and not know about it?

  This isn't a stupid question.

  Google Chrome has its own library of fonts.
  
  Mozilla Firefox runs Windows fonts library.

  To run on Firefox fonts, they must be installed on Windows and then Firefox must be restarted.

  Sometimes, Web sites do not use the correct font name and the police is found, even if it is installed.
  
  A good website designer would design a Web site with backup for users to load fonts if they do not have the installed font.

• Why my "Epson Stylus SX130" disk does not work when inserted?

  Asked me to insert the disc from the manufacturer in the drive, I did and it works not (printer).  What next please... .anybody?

  Hello

  You can download and install the drivers directly from the Epson web site - here is the link:

  http://www.Epson.co.UK/store/printers-and-all-in-ones/Epson-Stylus-SX130/drivers-support?target=driver&LanguageID=1&driverId=328202&defaultOSId=3&DRV_CATEGORY_CODE=drv

  It is best to use the latest driver from the web site to use the CD that came with the Epson printer.

  LC

• Why is print shop 3.0 will not work on Windows 7

  Download the software several times.  Get compatibility problems and it closed... no answer... 3.0 is simply not compatible with Windows 7?

  According to the website of the 3.0 print shop, it is compatible.

  http://www.broderbund.com/c-30-works-with-Windows-7.aspx

  I would check with their support of assistance site.

• I bought my Gateway laptop that incorporates a webcam, and it will not work, did not work as I had. How can I solve this problem?

  I bought my Gateway laptop that incorporates a webcam, and it will not work, did not work as I had. How can I solve this problem?

  Have you contacted technical support Gateway?  http://support.gateway.com/us/en/support/default.aspx

  If for some reason you can't do that, more information about what you mean by "will not work" would be useful - how you try to use it (in an application provided by gateway, Skype, etc.) and what (error?) when you try?

• I just upgraded my Firefox to version 9.0.1, I get multi-page opening now when I launch my browser. A page is my home page, another is welcome to Firefox, and the other is my LassPass. Can anyone tell my why this is happening?

  A page is my home page, another is welcome to Firefox, and the other is my LassPass. Can anyone tell my why this is happening?

  Create a new profile as a test to see if your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.org/KB/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I do not seem imputted sound keys on my 'effects', can anyone tell my why? or how to add

  I do not seem imputted sound keys on my 'effects', can anyone tell my why? or how to add

  Trapcode Soundkeys is a third-party plugin commercial. You need to buy it.

  Mylenium

• Can you please tell me why my subscription of the CC is spent $ 31,79 per month to $49.99 per month? I was not told that there is an increase.

  Can you please tell me why my subscription of the CC is spent $ 31,79 per month to $49.99 per month? I was not told that there is an increase.

  You SHOULD have received an email reminding you that your launch price would go up to regular price at the end of your first year

• can someone tell me why this flv appears in chrome and not ie10

  can someone tell me why this flv appears in chrome and not ie10

  http://barbaracohenmusic.com/help.htm

  replace your div with this code

• Telstra Australia tell me that I have to use Chrome, as their facilities will not work with Firefox. Why?

  After spending literally hours trying to pay an account on Telstra Australia (that I just joined them, so it's the first installment), I finally gave up and contacted directly. I was told that Telstra services will not work with Firefox and that their preferred system is Google Chrome but Internet Explorer will not work.
  I have used Firefox for a long time and I'm happy with the program. Specifically, I have everything set up to work with Firefox and do not want to change. At the same time, I want to have the convenience of paying bills online.
  Can I load up, Google say, just one thing, or the program will then try to "catch" other functions as well?

  Yes, you can install Chrome and use it for a website. "Recovery" Chrome as other functions on your PC, just don't let it not be defined as "browser default" If you are prompted during the installation procedure. In addition, I doubt if you'll have a problem.

• Updated to iOS 9.2.1 and my flash or flashlight will not work? Why?

  SO I have updated to iOS 9.2.1 and my phone flash will not work, nor does my flash light! I don't have hard rest yet because I want to see if I can live without that maybe it's a bug, but I turned the phone market and I also did a still nothing of rest (hold the power and home button) can anyone help or have what, starting

  Are you sure that the update has caused the problem? If so, I think that a restore may be the best solution.

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Backward compatible? Can I write software in 2015 SP1 and expect it to work well in 2013 SP1? What are the features will not work?

  I need to set up some labview on my current computer software and run it on another computer in another country in a month. I was told that the computer I will eventually run from abroad Labiew 2013 SP1. I don't have a Labview on my computer today and thought I would setup the same SP1 version ito 2013 compatibility. However, it seems that this is not an option. When I go to download products my options are 2012, 2012 SP1, SP1 for 2014, 2015 and 2015 SP1.

  So what's the best move here? Can I install 2015 SP1 and wait that everything works ok when I go abroad? I guess not. Why 2013 SP1 is not an option for me? Should I see if guys abroad can upgrade to the latest version? What happens if they can't?

  Thank you

  Trevor

  As others said, the best option is to get the same version. If for some reason you cannot really, I suggest you get an older version, because then you can write the code in a newer version and backsave, there are at least two issues that may bite you if you are not well aware of how they work:

  1. If you have used the new features, they will not work in the old code. What you get in fact depends on the specific feature you are using.
  2. When you backsave, I'm sure that LV is a hierarchy save, which means, if you have screws located in the external files that are not vi.lib, it will create copies and you might have a more difficult time sorting out the dependencies.

  This occurs if you are using an older version, because the most recent version will simply open it.