Can I attach multiple external monitors to my Pavillion dv7 laptop?

Similar Questions

• HP Pavilion G7-2022US: no backlight on the LCD of the G7-2022US screen, but the video can be seen on external monitor

  I'm trying to fix the HP Pavilion G7-2022US laptop from a friend, the number of product B4Z74UA.  The laptop starts in Windows 7, but the screen is dark even during the BIOS or by MAIL.

  Symptoms:
  Laptop turns on but the LCD screen stays dark (during the POST and when Windows loads)
  With the help of a flashlight on the display shows that the video is present but the backlight does not work
  The video can be seen on an external display connected via VGA cable

  What I've done so far:
  Installed a new LCD screen cable
  Installed a new LCD screen
  Update BIOS
  Updated graphic driver
  check that the lid close switch works (small magnet under the screen that signals the motherboard to turn off display when the lid is closed)
  Static discharge by keeping the button depressed with battery and power adapter disconnected
  Checked if RAM could be bad

  I tried all the solutions above, but the screen remains dark.  The only way to use the laptop is to connect it to an external monitor.  I disassembled the laptop together and there is no inverter part to replace.

  I don't know what else to do.  Any suggestions?

  I finally found the culprit.  A circuit of (possibly a fuse mounted on surface) on the motherboard next to the display cable connector is visibly burned.  The circuit is too damaged to solder and close the connection.

• Satellite P100: Can I connect two external monitor to the VGA & DVI port at the same time?

  Satellite P100 comes with two port external monitor. One VGA and one DVI. Can you have two external monitor works at the same time? Can you have two external monitor as well as your internal screen working at the same time (for a total of 3 screen at the same time?

  Here's what I confirm:

  Internal display + display DVI connector
  OR
  Internal display + screen VGA connector

  Is it possible to have:

  Display connector DVI + VGA connector display?

  OR

  Display connector DVI + VGA connector screen + internal display?

  As far as I know, this is not possible and you can use a DVI or VGA port.
  Output signal can be used only a single port for external monitor.

• My laptop (Dell Inspiron only 3 months old) is displayed on an external monitor, but not on the laptop screen. I am running Windows 7.

  My laptop (Dell Inspiron only 3 months old) is displayed on an external monitor, but not on the laptop screen. I am running Windows 7. It was running and display very well last night. When I turned on this morning the monitor lit up but show just a gray-white screen and no office. When I attached an external monitor, I could see desktop and all other programs and Windows 7 routines seem to work very well.

  MB

  Press the Windows logo key and the p key, and then set up the PC to display on the built-in monitor only cycle through with the arrow key.  You can make this Store if you want - key Windows-p, right arrow once, paused for a few seconds & the laptop monitor should then appear normally.

  You can do so at the end of each session using the external display while you are ready for the use of the laptop on its own later.

• Connect the external monitor to my Sony VAIO laptop Win XP

  Connect the external monitor to my Sony VAIO laptop Win XP

  thanking you in advance

  Connect the external monitor to my Sony VAIO laptop Win XP

  thanking you in advance

  Is there a question here?

  Read your manuals and find a way to use your laptop computer based on the instructions from Sony to connect external (including projectors) monitors for the laptop.  Usually a connection (as you said Windows XP where you have published, probably VGA) for the monitor and a few buttons to tell the laptop to mirror or extend the display to the second monitor.

• How to connect multiple external monitors to Portege R830

  Anyone has any advice on how to connect more than one external monitor to a Portege R830?

  I have a monitor through the station home, but when I attach a second monitor to the port of the laptop do not recognize at all.

  It is used to work on my old Portege, but for some reason not on the R830.

  Any tips or advice?

  Hello

  You use the same port in the docking station and Portege R830?
  Docking station replica ports in order to use the Portege docking station port or port.

  If you want to connect more than one external monitor to the laptop then I would recommend using something like Toshiba Dynadock
  http://us.Toshiba.com/computers/accessories/dynadock/

  Welcome them

• Can I use two external monitors with Satellite P105?

  I wonder if it is possible to connect two external monitors P105-S9722 model using the DVI and VGA ports at the same time?

  Hello cozdas

  It is very interesting question but unfortunately I don't l t figured out how you use two monitors. Can you please be a little more specific?

  I am also interested in how you are connected the two monitors on your laptop?

• Re: Can I connect two external monitors to my Tecra M7?

  I have a Tecra M7, I would put up two external monitors. I install one on the VGA port and one DVI port and I try to extend the monitor overall, but the only option I have is to an external monitor and the screen of the tablet itself.

  Anyone have any ideas on how to solve this problem?

  As far as I know that something like this is not possible. Graphics card can send the signal on a port only, VGA or DVI.
  If you want to use two external monitors, you need an external device, such as Toshiba Dynadock (docking station USB with VGA or DVI port). Using the docking station, you will have three monitors shown in display properties. We will be connected directly to the laptop and the second on this docking station.

• Pavilion 15ab165us computer laptop 15.6: How can I add an external monitor to my laptop HP Pavilion

  I have a Pavilion laptop and want to use an external monitor at home rather than on the laptop monitor.  Is it possible and I can connect it to the USB port on the laptop?

  Hey1950, welcome to the forum.

  Yes, you can use a USB port.  Here is a USB video adapter that should do what you need.  These adapters are designed for USB 2.0. but they make USB 3.0, also.  You can speak with a representative at StarTech to answer your questions about them.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Can not do primary external monitor on Portege M700 & Dynadock

  It is impossible to make a screen Toshiba external 22 "the * primary * with the M700 Toshiba LCD screen as the * secondary * 'expanded '.
  The external monitor is connected to the Dynadock DVI. Runing Win XP SP3.

  The monitor works well as a display of volumes mirrored and extended with the M700 maintained as principal.
  Externally also works very well as the primary _WITHOUT_ display M700.

  When external is set as primary (and the M700 display is off), if I try to designate the internal display M700 such extended, the system reverts to the original with the M700 as main configuration and extended such externally.

  Any ideas why it does not work with externally as a main and the only extended such M700 screen with the Dynadock?

  Have you ever tried to test it, if you can define the secondary external primary and internal not using only not the dynadock?

  I would also recommend reinstall display drivers and dynadock too.

• Does anyone know the iMac of the 5 k MAX resolutions can handle for 2 external monitors? I know 1 is 4K, but it can handle 2 to 4K?

  I can't find what the 5 k resolution iMac external monitors can meet. I know it can do 1/4 K and the other one i can't find a definitive answer. Anyone know? BTW Im using Windows 10. If all that matters.

  Of Mactracker-> ' up to 4096 by 2160 (two screens).

  [EDIT] Same information at Everymac.com-> um-retina-5k-late-2015-specs.html http://www.everymac.com/systems/apple/imac/specs/imac-core-i5-3.2-27-inch-alumin

• HP ENVY x 360-15-u011dx Touch: help the implementation of multiple external monitors

  recently bought a HP ENVY laptop touch 360-15-u011dx x. Try to put in place two external monitors with a HDMI splitter. I can "extend" office, but both screens display the same image, which is not what I want. Can I set up two external monitors with this laptop using a separator (that was what I was told would work when I bought the unit and both monitors.)  Computers portable precedents had ports HDMI and VGA that allows two monitors.  This laptop (and most recent) no longer have a VGA port.

  Hello

  If you want 2 external monitors to have different point of view, you need two different outputs. Two monitors of a same source cannot have 2 times. My cheap suggestion: buy a cheap USB - DVI Cela will fix the problem. I did a test using a cheap DisplayLink and get:

  

  The central screen is the screen of my laptop

  Kind regards.

• How can I make an external monitor as primary to aspire 5738?

  I have 15 "laptop Aspire 5738. I hooked of 27 "external monitor to it. I am facing a problem with 27 "monitor. The display on the external monitor does not whole screen. The reason being the Aspire screen is main monitor by default. I want to monitor 27 "as primary. How can I do?

  And an external monitor connected and powered, do a right-click on the desktop, choose "screen resolution."

  Here you find the option to set as a default value, the external monitor.

  If you have installed the CCC ATI/AMD, no doubt, you can make settings of it.

• Can I use 2 external monitors with Satellite M70?

  Is it possible to connect to the PC (M70-131) 2 external monitors? Put do so via video splitter I have only 2 monitor Setup mode, instead of 3 as it should.

  How do you mean that. do you mean one to the external VGA port and the other to the S-video?

  Welcome them

• Can I configure 2 external monitors if so, how?

  MacBook pro mid 2012

  Processor: 2.5 GHz intel core i5

  Memory: 8 GB 1600 MHz DDR3

  Graphics: map graphics intel HD 4000 1536

  OSX El Capitan verzon 10.11.1

  Im trying to configure 2 external monitors. If its even possible it would be good to know what I need to set up the second monitor that has just a dvi d.

  Triplet makes the U244 - 001 - R USB 2.0 to DVI/Dual/Bangkok external video graphic card VGA Card - beware of other maps, as they could work, but this is the first I found which is compatible 10.11. There are many who will work with 10.10 and below, but with a better implementation of the Protection of the integrity of system 10.11, many manufacturers have not caught up with their drivers. -Hope this helps