Can not do primary external monitor on Portege M700 & Dynadock

Similar Questions

• Satellite P100: Can I connect two external monitor to the VGA & DVI port at the same time?

  Satellite P100 comes with two port external monitor. One VGA and one DVI. Can you have two external monitor works at the same time? Can you have two external monitor as well as your internal screen working at the same time (for a total of 3 screen at the same time?

  Here's what I confirm:

  Internal display + display DVI connector
  OR
  Internal display + screen VGA connector

  Is it possible to have:

  Display connector DVI + VGA connector display?

  OR

  Display connector DVI + VGA connector screen + internal display?

  As far as I know, this is not possible and you can use a DVI or VGA port.
  Output signal can be used only a single port for external monitor.

• My sager laptop does not detect my external monitor.

  My sager laptop does not detect my external monitor.  How can I do detect my monitor?

  Hi William,.

  1. What is the operating system installed on the computer?

  2. what happens when you connect an external monitor, receive no error message?

  I suggest you to follow the steps and check if it helps.

  Check out the links and check if that helps.

  Work and play better with multiple monitors for Windows 7

  Add a second monitor

  I hope this helps.

• I had an old iMac and had 2 external drives attached to it.  I got a new iMac and now can not plug old external drives were firewire 400

  I had an old iMac and had 2 external drives attached to it.  I got a new iMac and now can not plug old external drives were firewire 400 how can I hook up t he old external hard drives?

  You need a FireWire 400 adapter FireWire 800 and one FireWire 800 adapter Thunderbolt.

  (141473)

• Can not Backup on external hard drive, get error 0 x 810000006

  can not backup on external hard drive

  Close running programs as much as possible. Turn off or unplug the external drive. Market back or plug, wait a few minutes and try again.

  Tom Ferguson

• I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office.

  share external hard drive

  I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office. I want to be able to back up my laptop hard disk external.  Advice please.

  geraintjo

  I do not use homegroups, but 'true' to share, so I don't know how this is supposed to work with homegroups. But usually he should share a drive or folder, first before you can access it from another machine. (for example, click on the drive/folder properties and go to the sharing tab)

• W510 can not put primary monitor on the right

  I have a W510 in MiniDock Plus series 3. The operating system is Windows XP.

  I can activate my external monitor using the NVIDIA Control Panel. The page "Set Up several screens ' allows me to extend the desktop as 'A large horizontal Desktop' or 'configured independently.

  Using "Set apart" it is possible to choose either "laptop display + external" or "external + computer laptop display.» The screen that appears first is that logically on the left.

  Underneath, there is a distinct choice for the main screen of Windows.

  Because my office is configured with the laptop on the external monitor to the right and the left, I want to have ' laptop display + external ', with 'external' as main display.

  Among the four possibilities, it is one that does not. When I choose the laptop on the left and the external as primary, the laptop is always a priority.

  If I choose as the main external, can I have the phone as secondary, but it is logically to the right, but physically to the left. So to move a window to the left screen I have to drag it out of the right. I can not physically reconfigure my workspace to bring the laptop to the right of the external display.

  What Miss me?

  This seems to be a bug in the NVidia (3.3.452.15) Control Panel. It cannot apply the correct setting.

  The solution is to change the position of the monitor using the windows display settings tab properties drag the monitor icons so that the '2' monitor is on the left. Then it will be applied correctly, and the NVidia control panel will be able to read the configuration.

• How can I make an external monitor as primary to aspire 5738?

  I have 15 "laptop Aspire 5738. I hooked of 27 "external monitor to it. I am facing a problem with 27 "monitor. The display on the external monitor does not whole screen. The reason being the Aspire screen is main monitor by default. I want to monitor 27 "as primary. How can I do?

  And an external monitor connected and powered, do a right-click on the desktop, choose "screen resolution."

  Here you find the option to set as a default value, the external monitor.

  If you have installed the CCC ATI/AMD, no doubt, you can make settings of it.

• Satellite U305: can't watch video on the external monitor on Vista with Dynadock

  Hi mates,

  I have a Satellite U305 running Windows Vista, I also bought a VGA Dynadock with HP 20 "external monitor.

  I have uppdated all Dynadock readers (Audio, video, etc.) to the latest version, but DVD-video or MPEG video recorded with my camera is not possible to look at the monitor extended that in the main screen (laptop computer monitor).

  For example, my DVD Toshiba drive works normally on the laptop monitor but when I transfer window extended monitor, Toshiba DVD Player stops to work.
  Video does not work on the extended screen.

  Is this OK or I did something wrong configuration? Is this a bug? If this is a bug, how to fix this bug?

  I'm you worry because I plug a large external monitor to watch a few movies that I can't watch it.

  Thanks in advance for your help.

  Nilton

  I agree with the snipe of the user. The dynadock is simply not designed to transfer the enormous amount of data that accumulate to watch movies on DVD.
  The USB ports are simply not designed for this

• External monitor connected to the Dynadock does not work

  I just bought a docking station universal toshiba dynadock via amazon.com (latest version). I plugged on an Acer Aspire 5738zg computer laptop, Windows 7, 64 bit.
  Everything works great - except for my external monitor (6 months old packard bell viseo 190w, 18.5 inches, max resolution 1366 x 768 at 60 Hz)

  The dynadock manual says connect with monitor dynadock station via a vga cable - what I've done. Job monitor is completely black. The manual says then click the icon in the field of system status / tray (do not know what the word - the small icons at the bottom of the screen on the right screenfor side which) to configure the dynadock to be extended or mirror mode.

  Problem is that the icon does not exist. I have the icon for the audio part of the dynadock and icon for the system whole dynadock (icon called "toshiba dynadock tool" - here I can release the docking for example, but do not do anything on video/screen).

  I checked and the video/screen the dynadock element was installed togheter with everything - the installation was complete and successful. Still no icon if...
  I'm not watching videos or games, just be able to use my external when monitor I surfing online and you use microsoft word etc. - no data transfer gigantic so far as I can tell.

  How to solve this? Via the control panel of my laptop? How...? :-)

  I'd appreciate some advice that I am completely lost as to how to solve this problem (tips preference in the form of a very easy step by step 'manual' as I'm absolutely not an expert in computer science, just a regular user).

  Hi nanna.

  I think that the best way to solve this problem is to download and install the latest graphics driver for the dynadock.
  So please, use this link, download and install the driver.
  http://www.DisplayLink.com/support/downloads.php

  If the external display doesn´t not working after installing the driver, please do a right mouse click on desktop and verify the "screen resolution".
  You should see 2 screens.
  If this is not the case - there is an error during the installation of the utility dynadock.

  In this case, please visit the toshiba page
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp and download the latest dynadock utility.

  Please chosse: Options - connectivity - Docks & replicators - Dynadock

  You will find the version 2.4.0.13

  hope this will help you!

  Best regards

• How to connect multiple external monitors to Portege R830

  Anyone has any advice on how to connect more than one external monitor to a Portege R830?

  I have a monitor through the station home, but when I attach a second monitor to the port of the laptop do not recognize at all.

  It is used to work on my old Portege, but for some reason not on the R830.

  Any tips or advice?

  Hello

  You use the same port in the docking station and Portege R830?
  Docking station replica ports in order to use the Portege docking station port or port.

  If you want to connect more than one external monitor to the laptop then I would recommend using something like Toshiba Dynadock
  http://us.Toshiba.com/computers/accessories/dynadock/

  Welcome them

• Tecra A2, making it the primary external monitor

  I connected an external flat display of 1280 x 1024 on my A2, the extended value desktop and the native resolutions, everything looks "sharp."

  But whenever I click on the 'do this (external) monitor the primary monitor' box (then apply...); the external screen goes black and the laptop screen goes back to 640 x 480 resolution...

  Before I was perfectly able to do my external screen in primary, but since the 1.30--> 1.40 firmware update it seems more possible... Yet, in my preferences-monitor the appropriate box is clickable. I've also updated the graphics card drivers, but no result better here.

  All I can do to make this work as it did before? Which means that all the screens native resolution and the external display being the main with the Windows bar at the bottom? Any help appreciated :-)

  Greetings from Holland!

  Rin

  Hello

  Is this the situation even if you use the extended desktop in the properties of the graphics controller Intel?

• Need for external monitor for Portege R500

  The screen on the R500 (PPR50E-01301TEN) is fine for a use for an hour or two on the go, but if I use it constantly throughout the day, I get a bad neck and headache (perhaps the angle that you have to look as far as its small size). So I want to get the external monitors for her at work and at home. Home preference would be an LCD TV.

  The problem is Windows tells me that the screen resolutions supported for the external monitor is 1280 x 768, 1920 x 1080 and 1920 x 1200. Linux wants to offer me 1280 x 800 or below, although I might be able to fix this with a little tweaking. Assuming that Windows is right, does anyone know of a 18-21 "wide screen monitor or a TV with one of the resolutions supported as its native resolution, or even a resolution supported? I can't find something.

  It should probably be 1920x1xxx, 1280 x 768 will be quite grainy close up on a 18 "+ monitor." Why aren't all common intermediate resolutions on the monitors (1440 x 900 or 1680 x 1050) supported? If he can do 1920x1xxx, he should be able to make them.

  As much as I know duplicator can not improve things. This external device just flow through the signal from the computer laptop itself.

  What resolution do you need for your monitor?

• Satellite L850-1v0 - alert "Cable not connected" when external monitor OFF

  Hi all

  I have a portable Satellite L850-1v0.
  My monitor is an A.c.e.r X233H
  Windows 8

  I have the setting 'Disable the display' 5 minutes.

  However, when the laptop off the screen I get a small box that bounces around the screen stating "Cable not connected". The monitor is connected via the VGA port.

  If I connect the monitor to my other machine it turns off fine and do not show this message.

  How can I get the laptop to turn off the display correctly?

  Thanks in advance
  Richard

  > when the laptop off the screen I have a small box which bounces around the screen stating "Cable not connected". The monitor is connected via the VGA port.

  The message appears because the signal to the external display was interrupted because of the setting: turn the display off.

  > If connect the monitor to my other machine it turns off fine and does not show this message.
  I think that the other computer/laptop supports another graphics card and so this message does not appear.

  Satellite L850-1v0 support and use of the 4000 Intel HD Graphics intern, who is part of the processor Intel® Core i3 - 3120M and this graphics card shows these alerts

• HP Pavilion G7-2022US: no backlight on the LCD of the G7-2022US screen, but the video can be seen on external monitor

  I'm trying to fix the HP Pavilion G7-2022US laptop from a friend, the number of product B4Z74UA.  The laptop starts in Windows 7, but the screen is dark even during the BIOS or by MAIL.

  Symptoms:
  Laptop turns on but the LCD screen stays dark (during the POST and when Windows loads)
  With the help of a flashlight on the display shows that the video is present but the backlight does not work
  The video can be seen on an external display connected via VGA cable

  What I've done so far:
  Installed a new LCD screen cable
  Installed a new LCD screen
  Update BIOS
  Updated graphic driver
  check that the lid close switch works (small magnet under the screen that signals the motherboard to turn off display when the lid is closed)
  Static discharge by keeping the button depressed with battery and power adapter disconnected
  Checked if RAM could be bad

  I tried all the solutions above, but the screen remains dark.  The only way to use the laptop is to connect it to an external monitor.  I disassembled the laptop together and there is no inverter part to replace.

  I don't know what else to do.  Any suggestions?

  I finally found the culprit.  A circuit of (possibly a fuse mounted on surface) on the motherboard next to the display cable connector is visibly burned.  The circuit is too damaged to solder and close the connection.