Can I break association of the symbol to its original parent duplicate?

Similar Questions

• I lost my recovery for Windows Vista disk. How can I restore the computer to its original factory State?

  I lost my recovery for windows Vista disk. How can I restore the computer to its original factory State? I can't find how to create recovery discs, I did not have this option in the Recovery Manager

  Hello

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Get a fixed image and audio while playing a movie in Windows Media Player, also get the message: "network is too busy to read the file to its original quality.

  Original title: Windows Media Player

  When I go to play a movie using windows MediaPlayer all I get is an imagwe again with audio and this message 'network is too busy to read the file to its original quality. Also, all my other media playing programs read the video but are rather "lag". I think the problem is that I already used a program to download torrents called 'BitTorent' and maybe this has used up all my bandwidth or processing speed? Not really sure but would really like it if I could still use WMP and I'm looking for resolution to my problem?

  Thank you

  Hi Jeremy,.

  It seems that you have problems with playback of video files in Windows Media Player.

  1. what operating system do you use?
  2. this happens with all the videos?

  If you use Windows 7, here are a few troubleshooting steps that you can try.

  Method 1: Try to run the troubleshooting Windows Media Player settings Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: If the problem persists, try to disable and enable Media Player and check.

  Step 1: turn off Windows Media Player:
  a. go initially and in search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck Windows Media Player.
  d. restart the computer.
   
  Step 2: Enable the Windows Media Player:
  a. go initially and in search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of the Windows Media Player.
  d. restart the computer.

  For more information, see the article:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Method 3: Try to re register the wmp.dll file and check if it helps.

  a. log on as an administrator.
  b. click Start, type cmd in the text box Search , right-click on cmd.exe, click run as administratorand then click continue.
  c. at the command prompt, type regsvr32 wmp.dll, and then click OK.

  I hope this helps!

• If a learner drags an object to the target of wrong depot, I want 9 Captivate suddenly the object in its original position immediately. Is this possible?

  If a learner drags an object to the target of wrong depot, I want 9 Captivate suddenly the object in its original position immediately.  For example, if I drag OBJECT_A to DROP_TARGET_A (i.e. to the good drop target), it should align on the drop target. But if I drag OBJECT_A to another location on the screen, I want OBJECT_A abruptly to its starting position. I don't want to use the send button or any message feedback. Is this possible?

  If not, is it possible to let objects correctly dropped on their drop targets (correct) as soon as the learner clicks on Submit, while allowing the wrong objects fall back to their starting point? I'm not a complex solution of coded manually; just a question if it's something easily configurable via the standard properties for drag-and-drop panels.

  Thank you!

  -Ray

  Hi Ray,

  It is possible in Captivate. You can select the wrong target, click on the 'actions Object' from the Panel drag / move. Uncheck the "OBJECT_A" of the dialog "drag Source has accepted." Repeat the same for all incorrect targets/sources.

  Thank you

  VERALINE Sukumaran.

• When changing POP, IMAP, pop emails downloaded existing can be merged/synchronized with the mails from Gmail original online?

  Were download my emails via POP since 2006, I now turn to IMAP. Is it possible that the downloaded POP emails can be associated with the original corresponding emails in Gmail so that I don't have to download about 10 years worth of emails via IMAP?
  Thank you!

  The short answer is no.

• How can I reset a raw image of the device to its original state

  
  I need instruction on a raw image of the camera back to its original state.

  My favorite is to bridge method, right-click on the thumbnail of the raw image, select develop settings, and then clear parameters.

  Richard Southworth

• Are there already experiments with FM 2015, scaling of the image to its original size in the HTML output

  FM 12 provides the following procedure (as read in the manual) to see the images in original size in the HTML output. I did and was happy. But now in 2015 of the FM, the operation is no more.

  > >

  In the Setup file (settings.sts) you can set the image (default size) the parameters width and height to 0pt so that images in the HTML output are displayed in the original format. FM 12 it worked fine. The result was, that the style to the statement tag < img > is deleted in the HTML code output, so that the images keep their original size. But now in 2015 FM it seems there is a bug. The same procedure has the effect that the style statement is in the HTML (is not deleted) and width and height are on 0x0pt. The result is that all the images are invisible. If I disabled 'Preferred size' images in the HTML output are always scaled down in a 'random' size, nobody knows where it comes and how I can trouble or spend that in 2015 scaling of FM.
  

  > >
  

  Anyone who has ever even erperiences with the new 2015 FM?

  THX
  

  Hello

  There was a bug in the publication process of FrameMaker for which we had planned a work around to set the width and height 0pt. Now we have fixed the issue when you set 0pt as the width images will no longer appear.

  Now in your output images will seem to have the same size, such that they appear in the documents of source if preferred size is not defined. If this isn't the case, you can share your example of source document so that we can have a look.

  Thank you

  Ritesh Kumar

  [email protected]

• How can I get rid of the symbol of McAfee

  There is an embarrassing symbol of McAfee in the upper right corner of my screen. How can I get rid of him?

  Hi DoggyGoWoof, it's likely to come under one of your extensions. If you just want to hide the icon, right click and select remove from the toolbar - otherwise, if you want to uninstall the extension, please refer to disable or remove modules

• How can I get rid of the symbols

  Hello
  I used this code to place a symbol on the canvas as a framework for support:
  this.attachMovie ("symPanda8", "choice1d", this.getNextHighestDepth (), {_height, _x:217, _y:230, _width:150:151.4});})
  
  so, how can I get rid of it when I'm done with it? I tried a blank Keyframe again in the next section and tried choice1d.visible = false; but they don't seem to work, the only way that I can't get rid of it is by setting the alpha to zero and disable it! but I don't want to do it somewhere else, would prefer that he just go!
  
  would be grateful for your suggestions!
  
  Thank you

  Hello addybombaddy,

  > Hi,.
  > I used this code to place a symbol on the canvas as a framework
  > load:
  > this.attachMovie ("symPanda8", "choice1d", this.getNextHighestDepth (),)
  > {_x:217,
  > _y:230, _width:150, _height:151.4});
  > How can I get rid of it when I'm done with it? I tried
  > a new blank key frame in the following image and we tried
  > choice1d.visible = false; but they do seem to work, the only way I
  > may seem to get rid of is by setting the alpha to zero and
  > Turn it off! but I don't want to do it somewhere else, would prefer that he
  > Just go!
  >
  > would be grateful for any suggestions!
  >
  > Thank you

  Try:

  removeMovieClip (this.choice1d);

  or if you need clean the holder of all:

  for (var I in this) {}
  If (typeof (i) == "movieclip") removeMovieClip (this );
  }

• cancel the file association for the extension .lnk to original setting

  all the hits (shortcuts) now have the extension .lnk wasw here before I have had a crash.

  If you want to attach the file to the original associations, look here:

  'Windows XP file Association problems'
    <>http://www.dougknox.com/XP/file_assoc.htm >

  HTH,
  JW

• Find on Notebook S/N, with the help of its original details S/Ns

  My HP laptop was stolen 2 days ago and the main problem is that I even could not report it to the police since I don't have all the documents proving his membership in me: neither serial number nor the guarantee certificate.

  But recently, I had both replaced in details: drive HARD and battery. In other words, I have the "old" here and know their S/N.

  In this regard, I would like to ask whether it is possible to find on my laptop S/N, if I have a S/N of its details initially set up?
  In addition, I discovered S/N of my new HARD drive, which is now operational in my stolen in New Brunswick. Of course I reported it to the police, but I think that the research would be more effective if I knew that the S/N of NB itself.

  I really hope that you can help me and I am looking forward to your reply!
  Thank you!

  According to the message that you posted recently I would recommend you immediately Contact HP support by phone to get help without delay to get all the details you're looking for

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Unable to restore the taskbar to its original position

  Original title: move the taskbar

  I have windows Vista. The taskbar just jumped over the side right and come back down.

  Yes, I did make sure that it is unlocked and Yes, I tried clicking on a void of space in the taskbar and drag it to the bottom of the screen, but it won t slide down, or drag anywhere at all.

  What I am doing wrong?

  Hi amorchien,

  1. don't you make changes before the show?

  We recommend that you download and run Microsoft fix this article and see if the problem still occurs.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CTRL + 0 does not display the image in its original size

  In earlier versions of Photoshop, ctrl + 0 caused an image will expand such that I could see it on my screen. Now, however, it means images will expand slightly, to cover only about 60 of the visible image in the Photoshop window. How it will expand more in detail?

  It may be a smaller image.

  Use Ctr ++ (plus) as often as necessary to increase the size.

  CTRL + - (less) to decrease the size.

  Or use the scroll bar on the browser.

  Nancy O.

• HP Pavillion DV-7? Nr can a recovery disc in the Blu - Ray drive and reinstall original settings?

  After my sister died, I found his nearly new laptop (HP Pavilion DV7? nr), but have not been able to use it, because of password and a biometric scanner. It sounds like a nice laptop, but worthless if I can't use it. Any Suggestions for one-it-myselfer (cheap)?
  A recovery disk can be inserted into the Blu - Ray player and re - install the original settings?
  There were not any software who carried on this laptop, so I don't know if she had, originally, and if it would work as does my drive recovery for my old HP Pavilion laptop using Vista.

  After my sister died, I found his nearly new laptop (HP Pavilion DV7? nr), but have not been able to use it, because of password and a biometric scanner. It sounds like a nice laptop, but worthless if I can't use it. Any Suggestions for one-it-myselfer (cheap)?
  A recovery disk can be inserted into the Blu - Ray player and re - install the original settings?
  There were not any software who carried on this laptop, so I don't know if she had, originally, and if it would work as does my drive recovery for my old HP Pavilion laptop using Vista.

  Contact HP and see what combination of keys at startup it probably gets to the factory defects.

  Maybe this:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&cc=us&DLC=en&product=18703

  Restore the PC to its original state with the HP Recovery Manager if Windows Vista is not accessible

  If the computer does not start in Windows, it may still be possible to use the HP recovery disk to restore the computer to its original state. The Recovery Manager can be started during the boot process by following the steps below.

  1. Press on the button / stop to start the computer and press f11 when the standard BIOS guests appear on the black screen.
     

     NOTE: by pressing the f11 key during startup on a computer with an image factory HP will start the system recovery process, even if the message is not displayed.

     • If the HP Recovery Manager can access the recovery on the hard drive partition, you receive a to back up user files before you start the recovery prompt. Follow the instructions.

     • If the HP Recovery Manager cannot access the hard disk to resolve system errors, you need to use the recovery disk custom that you created to recover the hard disk to its original state.

     • If you have not created the custom recovery disk, or disks are damaged, you can order a replacement of HP recovery CD.

  2. When the Recovery Manager starts, follow the instructions of recovery step by step , shown above.

  Solve a common problem of recovery.

  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.

  Or try to order a new recovery discs...

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07143&LC=en&cc=us&DLC=en&product=18703#N76

  Maybe this article:
  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320

  HP has a simple recovery process, and its policy to provide filtering alternatives is well integrated in its support pages.

  I went through the process of replacing for a two-year-old HP Pavilion Elite m9600t. This system was built in the summer 2009, before Windows 7 shipped. As a result, my only option was to support Windows Vista 64-bit. For first class mail, HP shipping or taxes added up to $15.80. (I might have updated 2-day or night FedEx delivery for another $6 or $12, respectively.)

  

  From this page: HP and Compaq Desktop PC: looking for recovery discs?

  There step by step instructions to create a recovery disc for Windows 7, Windows Vista and Windows XP. Also, it offers the possibility to order replacement disks, but warns that these discs may only be available for a limited time:

  If you are unable to create a set of recovery discs, you may be able to order a set of replacement of HP HP discs. maintains an inventory of recovery disks of replacement several years after the product was released. However, due to licensing restrictions, HP is able to provide these recovery disc for a limited time. If the computer is several years after its warranty period, HP isn't maybe able to provide replacement for your computer disks.

  I tried with a model of 2008 HP (long out of warranty) and was able to locate filtering alternatives.

  The process of media control was a little confused. The key is to start with the appropriate model number, then click on software and driver downloads, as shown here:

  

  On the next page, you are prompted to select an operating system. The support link to recovery in the results list is available only if you select the version of Windows that your computer initially comes with. If you do not see a section "Recovery media", HP suggest "to ensure that you are on the right model number page and select another operating system." It worked for me.

  Interestingly, the last section on the page is titled "finding of the recovery disks from other Web sites. It contains a warning at the top in bold: try all other options in the paper support before attempting to order recovery disks at outside HP.

  If HP is further providing the recovery disc for your computer model and is no longer possible to create a recovery disk, you may be able to find a solution outside of HP.

  Popular online auction sites and providers of computer parts may have a part in stock original recovery disk. However, be cautious and aware of the risks when buying from a source outside of HP recovery disks. Beware of sites that offer recovery solutions when they are not affiliated with HP.

  Even if HP could not have a recovery disc available for purchase of value, search the part HP command Web site to find recovery kit part number that corresponds to your computer. Once you find the part number of the recovery disc, use the number in your search for best results.

  It's actually good advice. If you can find a part number, you may be able to find records of replacement from a legitimate outside vendor that specializes in parts for the models of the manufacturer of your PC.

• After scanning in a file, I can't save the PDF file with a unique file name, it will only back up in its original name; Otherwise, if I save the name of the file under a new name, save it box goes outside and the file is renamed and saved. Help!

  If I analyze the file and its original name is:

  Ssrv395alm76439... and I want to rename it "background."

  If I have the rename, the file won't save. If I leave the file as it will save and I have to go to an additional folder and rename it.

  Help, it's too long. I just click on "Save as" and rename and save the document in the necessary folder at a time!

  Hi Allisonchristinele ,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after crossing "" help > check updates "»

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  Like 'save' will save the changes with the file & "save under" will give the window using which can save the file to any location on the system.

  I would like to know is what is happening with some or all the files.

  Also, please try to check with the different user account to reproduce the problem.

  Kind regards

  Christian