Can I configure more shared services 13:00

Similar Questions

• How can I configure printer sharing

  I'm looking for a simple to follow guide software that will allow me to share my printer on my computer a little im alliterate wireless network when it comes to windows.

  I use windows xp and a linksys modem model: wag160n

  How to use Windows XP to share a printer with other people on your network

  John

• Urgent: Configuration of the various components of Hyperion a shared service

  Hello
  
  Here are my requirements:
  
  We are updating our existing Version 6. X 7 X 11 Version EMP applications. I want to configure all applications installed in different servers in a shared service. All users belong to an Active directory only.
  
  Plan is like this
  
  Server1: Essbase component. I have almost 5 application created in this server.
  
  Server2: New Essbase. Again the application 5 is this server.
  
  Server3: Hyperion Planning,
  
  Server4: Hyperion Financial Reporting
  
  Server5: Hyperion workspace
  
  
  So, all these different Essbase and planning applications are installed in differnet servers. Can I have 1 Shared Service for all these applications. If so, can anyone suggest the approach and configuration details.
  
  Appreciate your help in advance!
  
  Thank you very much... Best regards, UB

  It should be exactly the same process as with a single instance as long as everything has been saved successfully.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Portage to Essbase/Shared Services other landscapes.

  Hello
  
  I need port/refresh the Essbase/Shared Services (11.1.1.1 on Windows) of the development environment for Test environments. These two environments are different matters and I don't think I can usre LCM. I have Foudataion/Shared Services and Essbase configuration on the Destination host. Can someone guide me how I can move the Essbase/Shared Services in these environment manually. Document refrence or instructions step by step will be very useful.
  
  
  Thanks in advance.
  -Samar-

  The utility is located in:-Hyperion\common\utilities\CSSImportExportUtility
  He will need decompression there is also a doc pdf in there with details on how to run the utility, this utility is only for delivery.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Unable to start Shared Services 11.1.1.4

  We applied the maintenance patch 11.1 1.4 to our 11.1.1.3 System. Then I configured the services shared and deployed on weblogic. all successful by the EMP system configurator. Shared Services server starts, but the URL will not open-404 error. It's in the newspaper:
  March 19, 2012 11:28:08 - org.apache.slide.common.Domain - ERROR - cannot migrate groups hub to css
  connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@51be8e
  connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@6889d7
  CMSOfflineServlet initialized
  < 19 March 2012 11:28:00 EDT > < error > < HTTP > < BEA-101216 > < Servlet: 'HubFrameworkServlet' failed by preloading at startup in a Web application: "interoperability."
  java.lang.NullPointerException
  at com.hyperion.hub.struts.action.HUBActionServlet.initCSS (unknown Source)
  at com.hyperion.hub.struts.action.HUBActionServlet.init (unknown Source)
  at javax.servlet.GenericServlet.init(GenericServlet.java:256)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:278)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  Truncated. check the log file full stacktrace
  
  And it is in the shared services_security journal:
  2012-03-19 11:28:01, ERROR 500 [ExecuteThread [ASSET]: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.init (unknown Source) - 27:1062: unable to connect to the user native Directory directory. [Root Cause: [LDAP: error code 49 - Invalid Credentials]]
  
  Any suggestions to fix this? Thank you
  Jeff

  You need to replace the file slapd.conf with that from a backup made before the upgrade.

  Please see: Hyperion Shared Services fails to start after upgrade to 11.1.1.3 (Doc ID 1330551.1) MOS.

  HTH-
  Jasmine.

• question of shared services

  Hello
  
  I have a question I'm not able to solve. We are trying to install version 11 and every time I run the configuration utility to configure with shared services. It says successful but when I validate its all red and not able to configure with shared services.
  
  I said that drop the user to the shared services will help. I did also several times. but no help
  
  any suggestions
  
  Kira

  Hi Kira,

  1. When you say user of shared services, do you mean to say 'user' of shared services? or a schema/user for shared services in oracle database terminology?

  2. If you tried to drop the user, then I have a recommendation to drop the user using "CASCADE". It helped me.

  3. try and re set it up again

  Sandeep Reddy, Enti
  HCC
  http://hyperionconsultancy.com/

• Regarding shared Services

  Hi friends,
  
  Here is a general question about shared services. I outsourced an essbase server. I created a user of shared services, and when I created a user iam looking for option where the user can change the password for their first login. IAM unable to find this option in shared services. Please let me know if you have an idea.
  
  Thank you
  RAM.

  Hello

  If you want to return to native mode essbase can later convert mode shared services?
  Not something I would recommend to do, but maybe possible, you will need to remove the essbase Shared services project, stop essbase, rename or delete essbase.sec and rename ESSBASE. BAK_preUPM to essbase.sec, startup essbase.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How can I delete the previous configuration of Essbase Server Shared Services?

  Hi all

  I am trying to reinstall the Essbase Server (on a new server we have upgraded the Essbase server hardware) and reloads the data, but the current installation believes that I have already set up despite the withdrawal EssbaseCluster-1 of Shared Services Application groups.  Is there something else I need to do to get the new install Essbase server configured as a new instance of Essbase?

  Thank you
  Ryan

  If the server names have been changed, then it probably won't work, but I don't know what you mean that it did not work, you should check the registry of shared services, other possibilities are reset configuration tasks in the registry by using the epmsys_registry utility.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Shared services registration failing when configuring EPMA 11.1.1.3

  Hi all, I am currently woking on essbase and any knowledge of planning so tried to update my knowledge. I installed epma 11.1.1.3 on workstation to VMware windows 2003 that I have windows 7 laptop. oracle 10g installation created a user/database (epma) patterns (sm, ms) is trying to set up the foundation, essbase, planning and reporting and analysis services. the configuration database and register with shared services has failed. I'm doing something wrong. I followed some configuration documents that are documented with screenshots are still unsure as to what I do. Please advice on how to avoid these failures.
  
  Here are the results of the validation of the configuration.
  
  Thanks in advance.
  Srinivas
  
  Oracle EPM system
  Diagnostic reports
  Generated 03/03/12 23:05
  Running on validation srinivas
  Validation tool Info: 11.1.1.3.0 drop 9-0 build 3129 2009-07-16 13:24
  Name of the operating system: Windows 2003
  Operating system version: 5.2
  
  
  Status Service Test Description duration of test
  Foundation of Hyperion
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  relationalStorageConfiguration: Configuration failed
  Recommended action: try to set up the tasks mentioned 0s
  OPN FAILED: OpenLDAP Check if global roles number of not less than 16
  Error: $item.exception.localizedMessage
  Recommended action: 0 s
  OPN FAILED: connection OpenLDAP OpenLDAP
  Error: srinivas:28089
  Recommended action: open Start LDAP 1s
  The ERP Integrator
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Essbase / customer
  WR PAST: Windows registry check if EQD excel addin registered for Essbase Client 0 s
  Essbase / Essbase
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Recommended action: try to set up the tasks mentioned 0s
  EAS FAILED: Essbase Server start the Essbase server check using the Maxl command
  Error: Result: unable to connect to Essbase server by using the command MAXL. Please check the essbase server is running.
  Recommended action: check Essbase server is started. 2 1
  SVR FAILED: external auditor Essbase Java API launch with the following command: admin C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect * http://srinivas:13080/aps/JAPI srinivas
  Error: Result:-1; Error message: unable to connect to the olap service. Unable to connect to the Essbase server at srinivas. Exceeding the timeout to connect to the Essbase Agent/server using the TCP/IP protocol. Check your network connections.
  Recommended action: make sure that the external auditor is working. 7 s
  Essbase / Essbase Administration Services
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Essbase / service provider
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Recommended action: try to set up the tasks mentioned 0s
  Essbase / Smart Search
  CFG PAST: checking Configuration if all configuration tasks have been completed 0 s
  Essbase / Studio
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Managing the quality of financial data
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Foundation / calculation Manager
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Foundation / Performance Management architect
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Foundation / workspace
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  FROM HTTP: Http is [C:\Hyperion\common\httpServers\Apache\2.0.59\bin\installhyperionapacheservice.err] s 0 empty file
  [FROM HTTP: string check Http [LoadModule jk_module modules/mod_jk] file[C:\Hyperion\common\httpServers\Apache\2.0.59\conf\httpd.conf] 0 s
  PAST REG: Register all links are present in the registry. 2 1
  Performance dashboard
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Planning
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  applicationServerDeployment: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Profitability and cost management
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Strategic Finance
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Financial management
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Reporting and analysis
  CFG PAST: checking Configuration if all configuration tasks have been completed 0 s
  SVR FAILED: external auditor Essbase Java API launch with the following command: admin C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect * http://srinivas:13080/aps/JAPI srinivas
  Error: Result:-1; Error message: unable to connect to the olap service. Unable to connect to the Essbase server at srinivas. Exceeding the timeout to connect to the Essbase Agent/server using the TCP/IP protocol. Check your network connections.
  Recommended action: make sure that the external auditor is working. 1 1
  
  Test start time: 23:05:18
  End of test time: 23:05:40
  Test duration: 21s

  Hi Srinivas,

  I suggest you to do separately from the configuration of the different components. First you configure shared services and continue with the other components.
  And also using the same relational database for all components is not recommended.
  Doing so will make you empty the things about it you give and would be easy to fix too.
  And I'm sckeptic on your database connection.

  Few things to check before you start the configuration.
  1. check are you can connect to the database on firewall problems.
  2 and also check the timeout values defined for the database.

  Kind regards
  Pradeep

• MSAD question shared services configuration?

  Hello
  I recently configured MSAD with shared services.but, the problem is that the hfm users are not in the same group at msad.so I am not getting all the hfm users.so I set up 2 groups of msad more.
  
  now the problem is when configuring, please enter the username and password of any user in this group.here the password will change for each days.and 45 it is not practically possible to have other SSP password for the administrator to change for every 45 days.
  
  is there another solution for this problem.
  
  HYperion 11.1.1.2
  
  concerning
  Bharat.TV

  Hi Nani,

  Yes, you must specify a user id & pwd to connect MSAD, but do not use anonymous option as it is not a good practice to connect MSAD.

  As you say it is change of password in all 45 days so please check with the windows team who maintain & manage MSAD and let them ask to create a service account and do not set the option to password expiration after n days. This is how works the service account.

  Hope this will help you.

  Atul K,.

• How can I configure Server 2008 R2 to disconnect users, who have been disconnected more than exodus 12 hours?

  How can I configure Server 2008 R2 to disconnect users, who have been disconnected more than exodus 12 hours?

  These MS Answers forums are intended for the home rather than the it professional user. Please transfer your question in the relevant Microsoft Technet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.      :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms

• I want to share folders on my xp pro sp3 PC. How can I configure it so that a login prompt appears when users connect to it as \\ip\shared... ?

  I want to share folders on my xp pro sp3 PC. How can I configure it so that a login prompt appears when users connect to it as \\ip\shared... ?

  Hi Kelvin,

  You can share a folder on your XP by the listed method: http://support.microsoft.com/kb/304040

  Others have an option to connect to your pc as a guest, to make interactive you will need to click on start-> run, type &-> gpedit.msc

  Navigate to Computer Configuration-> Windows settings-> Security-> Security Option settings. On the right side, look for-> ' access network: model sharing and security for local accounts "-> double click and select-> classic-Local user authenticate.

  Now another pc you can access this computer and you will be asked for the username and password.

  I hope this helps.

• New Essbase application can be registered automatically in the shared Service

  Hi Experts

  I created an Essbase application in EAS web console (URL is : http://application-tier server: port/easconsole). How can I register it at the service of the brightness. The paper said that it is should done automatically, but I can't find it in the shared service. Do you have any ideas about this? I use EMP 11.1.2.3 and the server operating system is 64-bit Win2008. Thank you.

  The problem is resolved after add "AuthenticationModule CSS" in the file EPM_instance\EssbaseServer\essbaseserver\bin\Essbase.cfg file.

• On 4 k screen I do not see the menu, windows, etc... too small in adobe photoshop multidimensional. Can I configure their more big without change resulution of display?

  On 4 k screen I do not see the menu, windows, etc... too small in adobe photoshop multidimensional. Can I configure their more big without change resulution of display?

  In Photoshop CC 2014, go to preferences-> experimental features and allow 200% scaling of the interface user.

• Can we use 2 proceedings of Essbase with Shared Services of single instance

  Hello
  
  We have Essbase installed on 2 different servers and shared on the third server services. Can I use the same SSP for the 2 instances of Essbase?
  
  Thanks in advance
  PM

  Yes, multiple instances of essbase can be entered against one of shared services.

  See you soon

  John
  http://John-Goodwin.blogspot.com/