can I connect port 2 of my WLC 4404 in my dmz for access to guest user

Similar Questions

• I can't connect to my WiFi using windows xp sp3 on bootcamp for Mac OSX Snow Leopard 10.6.8

  I can't connect to my WiFi using windows xp SP3 on bootcamp for Mac OSX Snow Leopard 10.6.8

  On the side of my computer's mac, the internet works fine.
  I just want the computer to recognize my home network, but it's as if we want a modem connection.
  Ask what you need to know the specs.
  I do this to play Halo on my Mac.

  This is the problem (which I corrected).  It's simple, all you have to do is to switch to XP, insert your mac installation disc and follow installation bootcamp, with all the drivers for mac compatibility.  The wireless just popped up as active.

  I lost my, but this isn't a problem: just go to the apple Web site, use the express track, diagnose your problem and have a representative call you.  They answer in a few seconds.  Replacement CD is very cheap ($16-2011).  You can get the CD of requests for replacement, which is another $ 16, but it is not important; XP does not use it, only the operating system for the drivers.  Mine came very quickly, in just 2 days.

  Hope that answers questions from the Internet.

  Now to play online Halo with my FPS Pro controller! 8 D

• Pavilion 14-n231TU: can I connect a monitor and use this screen as a monitor for my laptop?

  The name of my laptop is HP Pavilion 12-n231TU.

  I want to use an external monitor with my laptop.

  Is this possible?

  How can I do?

  #Reason - his only 14.5 inch display and can me not delight enough, when playing gamees with this small monitor...

  Waiting for answer

  Thanks bro. It has an HDMI output

• I can't connect to set N3048

  Hello friends,
  I have a N3048, but I can't connect to configure.
  It has a default ip?
  For Terminal, I came to appear not connect all the time '@' and other strange characters. use the port. o | o |
  There is a default configuration that can put this device on my pc for conecatrme.

  I solved the problem,

  I got a DB9 to USB (a digitus) and this did not work well.

  I got a laptop with pueto SR232 and everything went perfectly.

  Thank you for your interest and wanted to help me.

  Thank you.

• Can I connect wireless and wired to the Airport Extreme even? My House has plaster walls that inhibit the signal and I move to my office.

  I have a good Wi - fi network at home using an Airport Extreme and Airport Express, but am moving my office on the other side of the House. The walls are plaster that inhibit the signal. Can I connect another Express to my extreme via an Ethernet cable for the office. I still maintain the wireless network. Thanks for your help.

  Yes, it's the right way to do things.

  Only the express will not extend the wireless... you create a wireless network of the same name and security settings... This is called roaming network.

• BlackBerry smartphones can not CONNECT to THE SERVER

  Hello need help. My Blackberry Curve 8520 (OS 5.0.0.1036) does not connect to the server. It shows my network (Vodafone) and gets a strong signal; makes and receives calls; connect wifi; but it is also completely static. After the first Setup email screen I get: your device has a connection to the server problm.  (I think it means the Blackberry server?)  So I can not connect any email.  Very well in my other near-identical Curve 8520 Sim Card work.  How can I do please?  Y at - it a reset or software update is complete I can undertake? Thank you, Michael

  I can help you with the it policy... lack of procedure for access to the BES server, this (and only this) cleanse a BB to an it policy:

  • Article ID: KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

  If you do a backup/restore, don't do this basically... rather, backup/restore only the databases specific you need (for example, calendar, contacts, messages, etc.) and more precisely to avoid data bases having something to with COMPUTER policy, business, etc.. If you restore those, the it policy will be conscientiously restored to the device, and you will be right where you are now.

  As for a BES Server trying to reach out... There is nothing that I can offer you. Your best bet is to talk to your provider and make sure you have no BES-level service enabled on your account of them. Who should (note 'should'... is there no guarantees) prevent a BES server to reach out and the reactivation of your device.

  Good luck!

• I can not connect to face book

  I can not connect to face book

  Payam Afshar,

  Thank you for your message.  Your question would be better more responsive in theForums of Facebook.

  See you soon

  Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• Need to change the connection information for Windows 8 - can not connect to computer because associate login hotmail account has been deleted

  Long story short - the email address associated with my Windows 8, log in to my desktop computer has been deleted and now I can't connect to my computer at all.  Is it possible to access my computer without having to take my computer to a technician to reinstall Windows 8?  Any help is appreciated, thanks!

  Hello

  I understand that you have removed the Hotmail account and Windows does not let you connect as a result of this deletion. Unfortunately, there is no other way to enter to account without using the password (if the account is active).

  You can see the Microsoft Account self-help recovery article and check.

  Recover your account

  If no help, I would recommend that you post your query in Windows Live ID support for assistance.

• Can you connect to a logical unit number after you run a test with RecoverPoint SRM

  Sometimes, when I run a test of the recovery plan that it does not connect to one of my LUN in a RecoverPoint consistency group.  Is there a way I can connect to the LUN when running always the same test?  The same would be true if I would with failover, can I connect to a unit number logic which have not mapped for some reason any after the execution of the recovery plan for the virtual machine online.

  you really need to trigger an SR to see why the lun is not mapped. is the lun of a data store or a RDM vmfs?

  common causes (assuming here all LUNS are in the same consistency RP group):

  -device not picked up by refresh, difficulty because it is to increment the RS parameter to run > 1 rescan for the storage of preparation step (see MRS. Advanced settings)

  -data store not picked up by discount vmfs (SRM a timeout when refreshing VMFS which can be increased)

  -datastore not zoned properly on all hosts, look to see if some hosts have access and not others... which is usually a sign of your problem is one of the first two points and it is easy to see in the SRM newspapers so you should hire vmware support.

• Single WLC for company and guests

  Hi, we are looking for by deploying Wirelss on our corporate network. There are a few branches and a central office, we want to use if possible a unique WLC which will allow the two traffic users internal and invited so that isolate traffic comments.

  I understand there is the possibility of placing a WLC anchor in the DMZ for comments traffic and internal, but it's a bit exaggerated given the limited access required for guests at this stage.

  The highest is possible to place the WLC in the demilitarized zone or on the internal network all by having users comments traffic terminate in the area demilitarized and isolated internal traffic.

  The Wan branch offices are IP WAN and is it possible to fill in some way to the central office of WLC?

  Thank you

  We use a single wlc 2112 to provide both private and access as a guest in the seat and use h - harvest ap to provide access as a guest in the remote office.

  At Headquarters, access as a guest is separated on a port that is protected by a firewall to the internet. In the remote desktop clients are authenticated on the wlc before being passed to a vlan separate for access of their comments.

• How to create the filter by date of request for access using database connectivity tool

  Hello

  I had started my project by reading the access data, using a UDL connection,

  but now I want to create a filter for access by using a query that would select two dates and get all the corresponding data, how to query using SQL Parmetrized?

  Best regards

  Note: I do not know the SQL language

  Hi salim_mjs,

  You must use the date format that I have used. It is independent of the format in your database. It should be "month/day/year".

  Mike

• If 2 Airport extreme can stay connected to each other using their LAN ports?

  Hello friends,

  I would like to know if 2 Airport extreme or 1 Airport Extreme and Airport Express can stay connected to each other using LAN ports at the ends? I thought this is the LAN port 1 connected to the WAN port on the 2nd.

  Thank you

  To clarify the issue and the scenario, one of my friend described a typical scenario in which there are 2 AEs. AE1 has an ISP in its port WAN and AE2 has a different ISP in its WAN port. This 2 AE can mutually connected between them by using ports LAN AE1 and AE2 ethernet cable? He said this could be feasible if AE2 remained in bridged mode, without using the ISP attached to its WAN port. I just don't get how this is possible. Friends of the search help.

  Thank you

• my macbook pro 2015 lacks an ethernet port. How can I connect using ehternet?

  My macbook pro doesn't have an ethernet port. How can I connect my wifi is spotty, but the wire is good? Thank you!

  You will need an Ethernet to USB connection

  http://www.Apple.com/shop/product/MC704LL/A/Apple-USB-Ethernet-adapter

• How can I connect another monitor to compaq SG3 because there is only 1 VGA port and no HDMI.

  How can I connect another monitor to compaq SG3 series because there is only 1 VGA port at the back and there is no HDMI port.  The operating system is Windows 7. I think to buy vga splitter, I don't know if that will allow me to move images/data between the monitors. Please tell us what to do. Thank you

  It is based on the expected results.  A VGA splitter will give you two monitors but they will display the same image.  If the expected result is two different pictures, maybe something like this will do;

  http://www.Amazon.com/IOGEAR-external-video-card-GUC2015V/DP/B000NJFJJK

  or

  http://www.Amazon.com/STARTech-com-external-video-monitor-adapter/DP/B005G306I2/ref=pd_cp_e_0

  Some will also do DVI: http://www.amazon.com/Plugable-Multiple-2048x1152-1920x1200-DisplayLink/dp/B0038P1TP4/ref=sr_1_1?s=electronics & ie = UTF8 & qid = 1345919878 & sr = 1-1 & keywords = usb + to + DVI

• Can I connect VHS Video Recorder for Qosmio G20 using the antenna in the Port?

  Hello.

  I connect my G20 a very old VCR. Can I connect it to the antenna in the port? Someone at - it tried? Because it will not need to buy a cable SCART. And for what I searched by linking to the video in Port, if I want to record the signal, I have WinDVD record I did more.
  So I was wondering if connect the VCR to the antenna port. I'll be able to find and record the VHS signal on media center?
  Thank you

  I already tried on S - video In and I get black screen

  More: When I connect the laptop to a TV it works only via the S-video port. When I use the D-video port it simply doesn't work. The black screen.

  Of course you can do it. On this Qosmio laptop TV tuner works on the same principle as usual TV. You can watch movies on Qosmioplayer or using Media Center Edition VHS. In both cases start movie VHS and let Qosmioplayer or MCE sweep all TV channels. On one of them, you will see the picture of VHS VCR.

  All that s. I tested it with Qosmioplayer and MCE too. It works without any problem. I also tested recording option. This also works. Later, I edited material recorded and created DVDs.

  With short words: with Qosmio G20, you can do whatever you want. It's really good multimedia laptop.