Can I Crossfire?

Similar Questions

• Reference Dell studio 1536 gacé graphic / help__i have a computer laptop dell studio and I want to add additional video from my laptop hybrid crossfire support card and I can't find a solution and a graphics card for my notbook

  Ideas:

  • I have a dell studio laptop and I want to add additional video from my laptop hybrid crossfire support card and I can't find a solution and a graphics card for my notbook

  There SR 780 chip and also I could not find any housing emty external or internal to a 3D support
  Help, please

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi waheedkhan

  Welcome to the Microsoft Answers Forum!

  To install additional video card for laptop is not possible as desktop, as the video card is integrated with the motherboard. However you can contact Dell technical support if they can provide an additional location for add video card. Here is the link to the support technology guide below: http://support.dell.com

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• You can use Photoshop CC with Crossfire?

  It is not a matter of performance, just a matter of compatibility. I tried upgrading my system of monitors of two 4 k, the system is a Jack-of-all-trades. To play games, work and general use.

  The video card, I only have 1 DP and 1 HDMI 1. 4A port and I can't run the 2nd display at 60 hz. For some reason, it's listen Windows 10. I have my license on board graphics and used the DP for the 2nd screen and Windows works fine, but Photoshop will crash every time that loading with activated GPU acceleration and cards 2 graphics.

  My next option is to buy a 2nd card identical to my current ATI card and use the Display Port on the 2nd card. What I've read, it should work with Photoshop. But it's a hell of a waste of money basically just get a 2nd Display Port access. If I buy another ATI card, I assure you, I can at least make use of the card in the games and run in Crossfire and have no problems with Photoshop.

  Anyone had luck get Crossfire work well with Photoshop CC? I have once again, that I don't really like to run faster Photoshop, just that this is going to work and still provide access to all the new features that are beginning to demand the GPU acceleration.

  Hi CodeMonkeyX

  Please see the discussion below.

  Re: Video RAM and crossfire

  Re: Premiere Pro, Photoshop & graphics in SLI or Crossfire cards

  Hope that helps.

  Kind regards

  ~ Mohit

• AMD Radeon HD 6990 compatible with HP p7-1245 diamond? AMD Radeon HD 7450 Crossfire is the best?

  I play SWTOR with 25 mb internet and can't play on the spot. Just try to solve the problem of graphics agitated with the AMD Radeon HD 7450 card provided with the desktop HP p7 1245. Wouldn't be better to go with a configuration Crossfire or more powerful card like the diamond AMD Radeon HD 6990 or higher?

  Your system won't "Crossfire", "Hybrid Crossfire" or 'Dual AMD graphics card'... whatever you want to call. Only, the system has a PCIe x 16 location and uses Intel GMA on board. Here are the specifications of your desktop HP Pavilion p7-1245. According to specifications, your system has a 300 Watt power supply. To install anything but a low range graphics card, you'll need to replace the power supply. The Corsair CX500 and CX600 are highly recommended and favorite forum. For more information and advice please see Guide of Big_Dave for the selection of a discrete video card.

  Frank

• You can run two GEForce 220 s together?

  Hello, I have a fairly new e9180t I ordered for NLE work, but I have since got hooked on the game and the desire now with that I would have gotten a more capable than the GEForce 220 card he delivered.  So, I am considering the upgrade, but in my reading, I wonder if it is possible to get an another 220 and run them together just?  If this card can even be performed in an SLI configuration, it would give me all vs benefits/just performance deficits running a single GEForce 260 or Radeon 4870?

  I'm not even sure that my system supports SLI.  The general specifications on the system are:

  480W PSU

  IPMTB-TK MOBO (PCIe x 16 w/2 connectors)

  Intel x 58 chipset

  Any help would be great!

  ED, I did some research and it seems that the GT 220 is not SLI ready.  In addition, WoW does not require a video map high-end.  However, I recommend at least an ATI 4000 series or 200 series nVidia card.  I suggest to take measures of space will be adapted for the card to ensure that you choose.  Measure from the edge of the box to the opposite side of the motherboard where the PCIE slot.  It is the approximate length of the card which must integrate.  The 4870 is 9.5 "long and double profile.

  Well, to tell you the truth, everything I read in the past years, SLI and Crossfire only provide a 40% increase in performance.  It is not enough to encourage me to update my motherboard and spend the extra $ 300 for a second card.  I'm running a XFX ATI 4870 XXX 1 GB card in my gaming computer.  I play Brothers In Arms - road to full hell in settings.  It works perfectly.

  You are doing what is necessary to find out what you need to know.  Let us know if you have any other questions.

• HP 15-g009AX Crossfire does not

  I just bought this laptop... installed 8.1 and downloaed win the drivers of such support as mentioned in the forum page. But I can not yet activate crossfire, catalyst Center does not show an option, and GPU - z says that its available but disabled.
  The memory of graphic R5 shows also 0MB in gpuz. but the control center shows 512 MB... Help, please.

  

  Hi @GagzD ,

  Welcome to the HP Forums!

  I would like to take a moment and thank you for using the forum, it's a great place to find answers. You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are trying to install crossfire and were unsuccessful.

  This is not an option on your laptop.  Here is a link to AMD CrossFireX of Wikipedia to help explain.

• Download Crossfire needs a color scheme

  Please help to download Crossfire colorscheme

  [Moved from the community centre of Participation]

  Please help to download Crossfire colorscheme

  Is the download page a page of Microsoft.com? Otherwise, look for a "Feedback" or "Contact us" or maybe "Support" link on the page.

  Additional note: although it is a page of Microsoft.com, your message here can't everyone connected with the game in the download page.

  Don

• Windows Seven and CrossFire - online game

  Hey I have W7 RC version and I tried to start my favorite game - CrossFire
  But when I start it up windows crash and it seems to restart and blue screen.
  I wrote on the forum of crossfire and they said that:
  "We have several threads where people mention a BSOD with Windows 7, which means dump_wmimmc.sys. This file is part of Gameguard, so until Windows 7 is out there may be not a definitive solution for the error. »
  Can you please solve the problem? I really want to play this game

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is a problem installing Windows 7 positions and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  Thanks again,

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• In my XP box, I installed 2 video card that has an output of 2 x 2. So now, I have 4 monitors with my single xp box. I want to join another 2 monitors to him. How can I do? Is it possible to attach?

  In my XP box, I installed 2 video card that has an output of 2 x 2. So now, I have 4 monitors with my single xp box. I want to join another 2 monitors to him. How can I do? Is it possible to attach?

  I want to join 6 screens with a single CPU.

  Hi DebBiswas,

  You can attach as much monitor you need, but it depends on the material if it supports or plug another video on the computer card.

  If you use SLI / Crossfire, the system must support more than 2 cards.

• Crossfire with the a-10 cpu on a desktop p7-1451

  I've updated the power supply to a real power of 450 watts.

  Added a 6670 2 gig memory card video amd, but still do not see possibility of crossfire graphics on the cpu and video card additional. Any ideas?

  Here are the specifications of your desktop HP Pavilion p7-1451 and his card mother MSI MS-7778 (Jasmine). According to the specifications;

  Embedded video is not available if a graphics card is installed
  Supports PCI Express x 16 graphics cards
  Integrated graphics card or PCI Express x 16 slot are usable at once; they can not be used simultaneously

  Based on the text above the plug, it would seem that the integrated AMD Radeon HD graphic card is disabled when a discrete PCIe x 16 graphics card is installed. In addition, specifications do not suppport for AMD 'Dual Graphics' or 'Crossfire. ' So, it is possible that HP has activated this feature in this range of computers.

  There are people who claim they have had 'Dual Graphics' works on their desktop HP, but I highly doubt that it really works. 'Dual Graphics' requires a matching of the APU on board and support specific graphics cards in the BIOS for this feature to work.

  Please send BRAVO

• Is it possible for me to crossfire?

  Hello

  I have a HP Pavilion p7 - 1207c and I have recently improved with a Sapphire Radeon HD 6670 and a Corsair CX 600.I was told that, with them, I would be able to crossfire it. Is this true? I followed a tutorial and I couldn't even get past the first step, which was to change a setting in my BIOS at startup. I tried the keys F1 to F12 and delete and all set up different things I've never seen before. I used the BIOS on other computers before, but mine doesn't really have one. I found an option on one of the screens named UEFI and with a few searches on Google, I got a little the idea that it can be a replacement for normal BIOS, but everywhere I went was very vague and I can not even run UEFI request when I press on enter on it. I don't know yet what it really does.

  In addition, my vision AMD control center doesn't have the option for crossfire and I remember seeing it until I updated my graphics card. I don't know why he has it no more. Someone has an idea?

  I'm sorry I glose a bit there and I have a lot of questions, but any help would be greatly appreciated.

  According to the specifications, the desktop HP Pavilion p7-1207 c only has a PCI Express x 16 expansion slot card. Crossfire requires two cards without a second PCIe x 16 location, there is no way that you will always be able to use Crossfire on this computer.

  Please send Bravo

• A problem with your computer prevents the VAC system. You can not play on secure servers.

  Hello

  I have a same problem of the nomination and please help me. Steam gives me this error: https://support.steampowered.com/kb_article.php?ref=2117-ILZV-2837 followed all the steps and the problem is solved just at the moment 24 hours Max tried to change the Windows 8.1 Professional with the company 8.1 of Windows and the same error... at last, I found what the PROBLEM... Steam do conflict with the killer e2200 controller Gigabit Ethernet (NDIS 6 h 30) .

  Here is the spec of my laptop:

  Processor information:
  Vendor: GenuineIntel
  Processor family: 0x6
  CPU Model: 0x3c
  CPU Stepping: 0 x 3
  Processor type: 0x0
  Speed: 2494 Mhz
  8 logical processors
  4 physical processors
  HyperThreading: support
  FCMOV: supported
  SSE2: support
  SSE3: support
  SSSE3: support
  SSE4a: unsupported
  SSE41: supported
  SSE42: supported
      
  Network information:
  Network speed:
      
  Version of the operating system:
  Windows 8.1 (64-bit)
  NTFS: support
  Crypto Provider codes: supported 311 0 x 0 0 x 0 0 x 0
      
  Video card:
  Driver: NVIDIA GeForce GTX 860M

  The DirectX driver name: nvumdshim.dll
  Driver version: 9.18.13.4752
  The DirectX driver version: 9.18.13.4752
  Driver date: February 5, 2015
  OpenGL Version: 4.5
  DirectX card: NVIDIA GeForce GTX 860M
  VendorID: 0x10de
  Device ID: 0x119a
  Number of monitors: 1
  Number of logical video cards: 1
  No SLI or Crossfire detected
  The main screen resolution: 1920 x 1080
  Resolution: 1920 x 1080
  Main display size: 15.04 "x 8.46" (17,24 "diag)
  38.2 cm x 21,5 cm (43.8 cm diag)
  Main bus: PCI Express x 16
  Primary VRAM: 2047 MB
  Supported MSAA modes: 2 x 4 x 8 x
      
  Sound card:
  Audio: speakers (Logitech G35 Headset)
      
  Memory:
  RAM: Mb 16265
      
  Various:
  INTERFACE language: English
  Microphone: Not defined
  Media type: DVD
  Total disk space: 310220 MB
  More great free block on the hard disk: Mb 234051
  Date of installation of the OS: January 1, 1970
  Game controller: none is detected
      
  Software installed:
  Advanced SystemCare Ultimate 8
  Alienware command center
  Alienware on-screen display
  Hello
  Counter-strike: Global Offensive
  Dolby Digital Plus Home Theater
  EMSB
  Game Booster 3
  Google Chrome
  Update Google Helper
  Intel® Trusted Connect Customer Service
  Intel (r) components engine management
  Intel (r) graphics processor
  Intel(r) Rapid Storage Technology
  Intel (r) Wireless Bluetooth (R) (patch version 17.1.1449.356)
  IObit Uninstaller
  KMSpico v9.3.3
  Logitech Gaming Software
  Logitech Gaming Software 8,57
  Microsoft Visual C++ 2010 Redistributable - 10.0.40219 64 x
  Microsoft Visual C++ 2010 x 86 Redistributable - 10.0.40219
  Microsoft Visual C++ Redistributable (x 64) 2012 - 11.0.61030
  Microsoft Visual C++ Redistributable (x 86) 2012 - 11.0.50727
  Microsoft Visual C++ 2012 x 64 extra TIME - 11.0.61030
  Microsoft Visual C++ 2012 x 64 minimum - 11.0.61030
  Microsoft Visual C++ 2012 x 86 additional TIME - 11.0.50727
  Microsoft Visual C++ 2012 x 86 minimum - 11.0.50727
  NVIDIA 3D Vision Driver 347.52
  347.52 NVIDIA Control Panel
  NVIDIA GeForce experience 2.2.2
  NVIDIA GeForce experience Service
  NVIDIA Graphics Driver 347.52
  NVIDIA HD Audio Driver 1.3.33.0
  NVIDIA installation application
  NVIDIA LED Visualizer 1.0
  NVIDIA network service
  Optimus NVIDIA 17.12.8 update
  NVIDIA PhysX
  NVIDIA PhysX System Software 9.14.0702
  ShadowPlay NVIDIA 17.12.8
  NVIDIA Stereoscopic 3D Driver
  Update NVIDIA 17.12.8
  Updated NVIDIA
  NVIDIA 1.2.27 Audio virtual
  Overwolf
  Qualcomm-Atheros bandwidth control filter driver
  Qualcomm Atheros E220x killer drivers
  Qualcomm-Atheros Killer Network Manager Suite
  Qualcomm-Atheros Network Manager
  Realtek card reader
  Realtek High Definition Audio Driver
  SHIELD streaming
  SHIELD wireless controller driver
  ST Microelectronics 3-axis digital accelerometer Solution
  Start 8 menu
  Steam
  Surf protection
  Synaptics Pointing Device Driver
  TeamSpeak 3 Client
  5.21 WinRAR (64-bit)

  When I try to attach cs'a go with my ping wireless network is 200-250 :(((

  Please help me

  Thank you!!!

  Hello. I made this account just to meet you. I tried all the solutions, but my problem was solved after I uninstalled "iobit start menu 8 and iobit advanced system care ' completely and restart my computer. However, I'm also using Killer e2200 controller Gigabit Ethernet (NDIS 6.30) on my pc.

  Can you reinstall the driver of e-network killer and all iobit software uninstall your PC and tell me if your problem is solved? I will wait for your answer. Thank you.

• HP Pavilion 1245 p7 card mother upgraded to Setup Crossfire?

  7450 AMD card is not good enough. SWTOR cannot play on highest settings. my understanding is that the Crossfire is the way to go. can I install motherboard with crossfire Betacam in my HP Pavilion p7-1245 desktop.don't want to buy another computer

  If you can exchange your card for a HD6670, you can activate the option of Dual AMD integrated graphics to the APU. I just did it with my P7-1254. I don't know if it will be powerful enough for your 3D games, but it allows a considerable improvement in the graphics features.

  http://www.AMD.com/us/products/technologies/dual-graphics/pages/dual-graphics.aspx#3

• X 3 on the A51 09 ALX crossfire

  Hey guys and girls.  I have an Area-51 ALX 2009 with 1000w POWER supply.  I'm wanting to add a third graphics card for my crossfire Setup, but I'm not sure what I should do to get the connections necessary to it.  The card requires a 8 pin and a power connection 6 pin.  I have what appears to be a provision of 8 pins, but its very short and would need extensions if it can be used and I was wondering if an adapter is would be possible on the cd player power beam.  Thank you in advance, I really appreciate.  Here is my current configuration

  2009 area-51 ALX

  Stock MB w / Bios version 10

  Intel Xeon 5650 hexacore OC'd to 4.6

  Corsair H100i cooler

  Corsair Vengeance 12 GB RAM

  2 280 MSi R9 in crossfire

  SSD 250 GB PNY

  Lap times of 120 GB SSD

  Samsung 1 TB HARD drive

  No cd/dvd drive

  I saw your post last month, I didn't answer you at the time, but I lost track of it, so I'll chime in today to this one. There are three power supplies stock of Area-51. The 1000 watts gets a video cable pair but cannot make use of the small connector your P3, P3 will be 'dead', no power to it:

  

  1100 watt, as my old pictured below, can make the P3 go live, & I guess that all 1100watters have been shipped Black w / video extension cable that plugs into P3 (which has connectors are denominated p20 & p21); Therefore, the 1100watters would have got three video cables:

  

  There are two 1200 watt models: J297R & VHM5V (aka KGTGV) chrism of Dell is under the impression that VHM5V is specified in the KGTGV Assembly global supply, IE psu + cart as a "meeting", or the Assembly KGTGV we have all heard about:

  • Alienware Area-51 improved and Area - 51 ALX video card Configurations
  • http://www.Dell.com/support/article/us/en/19/SLN149781/en

  The Assembly KGTGV 'improved' food, was sold to the public as a way to run dual-590, dual-6990 or tri-6950. When I look to the top of the reqwirements of power for 6950, they are the maps of 200 watts. Three of them, we assume so are 600watts max.

  

  Two models of 1200watters get four video cables: two from the fifth case (like your cables 1000w do) both emanate from the chassis of the PSU (welded to the internal card). Each cable, as you know, will be a (primary) 6pin with a 6 + 2 rider (2ndary). If you get x 4 6 p and x 4 6-2 in the overall scheme of 1200w, the combination of which I guess can all connect to the tri-6950.

  Ok. #1 your 1000w PSU is incapable of sorting-280/280 x. not enough power, not enough cables.

  #2 even if you do go to the PSU of VHM5V (currently available on eBay USA) 1200w, 280/280 x is listed as a map of 250 watts. I like to think that vhm5v is about maxed out with tri-6950 or "600watts":

  • Don't let not the 1200 watt nickname fool you, it is not 12 volt 1200watts
  • they are notated as 975watts 12 volt max, there where the video cable rails are assessed about 550watts, tops (46Amps--> 46A x 12V = 552watts)
  • They provide 550watts cards on rails video cable, the rest of 12 Volt is provided through the pci-e motherboard: example, a 6990 valued at 375watts; in general, 300w goes to the card by the cables, the other 75watts passes through the pci-e mthrbrd
  • If VHM5V can power dual-6990 or tri-6950, we assume 600watts is being discussed & it runs near or even above his side max

  Radeon 280/280 x is a map of 250 watt; We assume that most of this 250w through cables, the percentage passes through the pci-e. In a world of sorting-6950 to 200watts x 3 or 6990 to 375w x 2 as the last installation known validated, I wonder if VHM5V can feed tri - 280 which are cards of 250w. We invite you to try & buy VHM5V on eBay or elsewhere online (bing/google VHM5V) (if you need y-splitters or buy an adapter that transforms a 6pin in a 6 + 2 etc so / them) & if we can't run your installation tri - 280... that psu will always have the value of resale... & you can resell it & leave it would seek you to an aftermarket power supply upgrade.

  In addition, be advised, our motherboard x 58 stock may need a 12-volt power adapter called PowerBoost EVGA, in order to saturate the pci-e lanes with 12 volts, mentioned in these discussions:

  • Area 51 ALX 5870 configuration Tri-feu?
  • http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19346132?pi21932=8#19753565

  (don't forget to check if the powerboost can fit into a slot pci in a tri-config, it seems all three cards would block the pci slot, how he is supposed to install into a pci slot, when executing the triple cards I don't know, maybe he can adapt, perhaps not, as it has been several years since I have read in this thread) :

  • Area-51 ALX, upgraded to AMD HD7990, thresholds of random power?
  • http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19563242?pi21932=1#20579067
  • Increased power EVGA is recommended now for the config of your double-280, ok? It will benefit your cards your diet & your motherboard, as all three will not have to 'work' If hard for 12 volt get through the pci-e cards
  • Some motherboards are available w/a 'plug', usually a molex 4pin to help get 12v to maps
  • Area-51 R2 now uses a pci-e 8pin added plug to help get added 12v cards
  • EVGA Pwrboost is the same principle to your x 58 board stock, regardless of the number of cards

  The bottom line:

  • your 1000w won't cut it
  • Double-6990 was maps of 375 watt = 750watts / tri-280 = 750watts
  • You can be 1 owners trying to run 250 watts sorting cards
  • model 1200w can or may not work (& have y-split/adapters for the connex 6pin)
  • If it works it's an easy upgrade (just drag it in there), if it does not work it has resale value
  • Pwrboost may / may not correspond to a tri-config, but will certainly help you if he does & may be required
  • If you continue to use the stock x 58 Board w/all power, you want the powerboost increase 12v for video through the path of the pci cards, since the x 58 is known for the bottle neck
  • PowerBoost will need a molex/device extension to take power, normally sata/device main beam fueling DVDs etc.
  • If the 1200w model does not work, you are looking at a power supply of spare swap

  Area-51 R1 has need "help wiring" in a spare power supply swap, namely an IO master craft edge 10pin cable & normally a 24pin atx extension. In my free time I make & sell psu 'swap kits' for Area-51. As said before, the Area-51 1200 watt psu stock is 1200watts name & can't compete w/a single 12-volt rail power supply which is designed to offer all 1200watts 12V ok? 1200w stock was cut to the top 12 volt rails in "multiple 12v power rails rated max 975watts & only so much of this 975w is delegated to the rails of the video cable, on 46amps or 550watts, okay? Sad but true.

  I currently offers a Nzxt Hale90 1200, XFX / Seasonic XM1 1250w, & Corsair ax1500i swap "kit":

  • http://www.eBay.com/Sch/drago_bludvist/m.html?_ipg=50&_sop=12&_rdc=1

  I'll give the ax1200i Corsair limited again soon, when Corsair back in stock cable that I use for the material, which is May 18 or more (out of stock since Feb), so I'll have to ax1200i offered again in about 2 weeks. If you prefer, oh, an EVGA 1600 watt Gold/Platinum/titanium, or any other brand of power supply that I do not make or offer cables for, basically, buy you it, send me a selection of your new cables, I give you what you need & post put everything back in the same package, Pierrette?

  Corsair Seasonic Platinum hx1200i Platinum 1200 candidates 1300w gold, these are acceptable EVGA among a few others.

  Based on the fact 280 are 250 watt cards, most likely you would take VHM5V to its limit, & to be honest I doubt you want to your power supply to reach its limit: the boot it on the warmer, he runs the less effective, it becomes more juice, etc.. I had my VHM5V professionally tested on a load Tester, he scored an 80Plus silver side, but I probably invest in a power supply with guaranteed nine Platinum/titanium without age, on a used VHM5V which is now several years old as it is. A friend me up if you want to look into an exchange of power supply, because I make swap kits much more time / are planning to retire. If you are good with cables & wiring you can make your own harness of cables & mio of course, here is a useful guide:

  • The ALX files: A theoretical approach to area 51 Power Supply Swap Corsair ax1200i ax1500i Seasonic x-1250 Hale90 new A-51 R2 1500w Psu
  • http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19540327

  When asked if the stock 1200w / 975 watts 12v max power can run tri - 280 who could be responsible for each race to the max (all 750 watts, peak to the intense game power)--> I don't know<-- only="" one="" way="" to="" find="" out:="" buy="" one,="" put="" it="" in,="" try="" to="" install="" a="" pwrboost,="" see="" what="" happens.="" if="" not?="" sell="" it="" &="" go="" for="" a="" psu="" swap.="" an="" alternative? maybe="" sell="" the="" 280's="" &="" try dual-290x's,="" perhaps="" a="" solo-295="">

  

• How can I capture video on Mac that works in Windows Premiere Elements?

  Hello. My PC is not a FireWire device because the FireWire card does not fit after I installed 2 video cards for crossfire, so the way to there, to capture video with my camera HD is on my Mac via FireWire. The problem is that video files captured on

  Mac do not work in Windows. My ideal configuration is one where I use the Mac simply to capture, and I say video programs like QuickTime or iMovie, to record the video captured on my pc (because my pc and Mac are connected via Ethernet). However, how can I enter in a way that makes the windows-compatible video files, without recourse to having to convert the videos every time? If I install first items in my Mac, will be able to capture in a way that makes the videos compatible with premiere elements on my PC?

  VideoHero

  I had the same problem when my old ant crashed the laptop a new was not equipped with firewire.

  As I use Elements I installed the software on 2 computers: my iMac and my Windows PC.

  It's perfectly legal, you can have the software on 2 personal equipment if you do not use at the

  same time (it's an installation DVD in my case) with a single license.

  When I capture on MAC with Premiere Elements, mpg files are created. You can use them to clip PC editing.

  In some cases I use iMovie to capture software natively time code splitting, that you can not with

  Elements with HDV footage. In this case, I need to convert files (with MPEG Streamclip) to be able to change

  with other software.

  ATR: it is a classic in Mac environment, because problem as the MPEG2 codec is not natively installed on the system,

  for the sake of license. You can buy an add-on (component MPEG2 Quicktime for Mac) on the apple store to be able to read MPEG2

  format QuickTime or iMovie, but it does not allow to write in this format. Apple has specific format used for HDV formats

  capture (a kind of extended MPEG2) in order to have the modification of the file with the HDV participation with iMovie.

  Best regards

  JM France