Crossfire with the a-10 cpu on a desktop p7-1451

Similar Questions

• MediaPlayer 12 on Windows 7 laptop playing my DVD with the sound; MediaPlayer 11 Windows XP desktop reads the DVD even with no sound: WHY?

  MediaPlayer 12 on Windows 7 laptop playing my DVD with the sound; MediaPlayer 11 Windows XP desktop reads the DVD even with no sound: WHY?

  Hello DebbieMarronYM,

  I suggest watching this thread where the poster had the same problem:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound/have-image-but-no-sound-when-playing-DVDs-with/211a9bfa-5d94-4CE1-AE95-84307ffdf20a
  Mind post x which is currently marked as an answer a lot of different solutions that can be useful.

• wanted: new HP desktops with the Intel (Skylake) CPU 6700 series

  For those who have purchased a HP desktop with Intel (Skylake) CPU 6700 series in, you should read this web info on a defect confirmed in CPU micro code which can cause blockages or problems when doing some heavy calculations:

  http://www.PCWorld.com/article/3021023/hardware/how-to-test-your-PC-for-the-Skylake-bug.html

  A fix has not yet been determined by Intel and my cat with the HP support was not successful to determine what HP knows about this problem and what they will do to ensure that those of us who have bought desktop witht this CPU will have the problem fixed.  According to web article, it could be something as simple as an update of the BIOS or as drastic as a reminder of the CPU and the replacement by Intel.

  I hope someone from HP will know more about it and reply to this post so that we are not left out in the cold.

  Hello:

  It is a peer to peer forum.

  HP maintains no official presence here.

  I suggest using this link and ask HP to keep you in the loop.

  Who knows, they may not even be aware of the issue.

  https://SSL.WWW8.HP.com/us/en/contact-HP/connect-with-HP.html

  I know that they are good enough to go back to people in this way.

• acrobatprodc installer does not much with the network and cpu disk and 0 byte 0%

  I am usin win10 pro 64-bit and I noticed that Manager tasks shows the installer as being 32-bit, even if no error or complaints have been question by the installer to start. It's truly something or should I kill and look elsewhere for my needs

  Only a few programs are 64-bit - -system requirements | Adobe Creative Cloud scroll down and check each program

  In regards to Cloud Setup does nothing, a few ideas below

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -Run "Difficulty Host File" option https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  A chat session where an agent can remotely look inside your computer can help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Some websites are not fully functional with the latest Firefox running on my desktop. For example: a Web site now I cannot link some pages - error

  Recently updated to 42.0 on my computer.

  A site where I used to go check my electricity bill does not accept my log in entries. Blocking my account after trying several times the user name and password. Opens well with Safari.
  Another site, I cannot access the Estatements. Error message. Features on this site otherwise good. Works with Safari.
  I would rather not use Safari.

  This problem may be caused by corrupted cookies or cookies that are blocked.

  • Check the permissions on the subject: permissions page and in "tools > Page Info > Permissions.
  • https://support.Mozilla.org/KB/fix-login-issues-on-websites-require-passwords

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  If the deletion of cookies did not help, then it is possible that the cookies.sqlite file that stores the cookies has been corrupted.

  • Rename (or delete) cookies.sqlite (cookies.sqlite.old) and if present remove cookies.sqlite - shm and cookies.sqlite - wal in the Firefox profile folder in the cookies.sqlite case has been corrupted.

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Problem with the setting on Windows 7 Remote Desktop connection

  Former title: remote access

  Dear Forum,

  I had a problem trying to help a friend with problems of view (running Windows 7), I'm on Windows 10.  When I try to make the necessary connections on his laptop I do not get the options I see in the help videos.  Rather than get three options;

  • Do not allow connections to this computer
  • Allow the connection of computers running any version (less safe) remote access
  • That allow the connection of computers running Office remotely with network level authentication (more secure)

  I get the screen below and clicking on advanced not me these options either!  Can anyone help?

  Thank you

  Stuart AV

  

  Hi Stuart,

  Please contact Microsoft Community.

  For better support and advice in this regard, I suggest post you your request in The Forums TechNetsupport. Hope they help you accordingly.

  I appreciate your cooperation in this regard.

  Let us know if you need assistance.

• Need help with the installation of adobe creative cloud desktop

  Hello

  I want to install adobe creative cloud desktop.

  But I can't it remains on the download and then I get a an error of 12E5

  Someone knows how to fix this?

  Kind regards

  you have a firewall is causing a problem?

  you have av cause a problem?

  also, if you follow the 7 steps, you can directly download a free trial here: http://prodesigntools.com/adobe-cc-direct-download-links.html

  and activate it with your serial number.

  If you have a problem downloading, you follow the 7 steps, or your browser does not accept cookies.

  the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  Unable to obtain the cookie translates into an error page displayed after clicking on a link on prodesigntools.com

• Does anyone got the HP Envy X 2 to work properly with the 8.1 update?

  I had no chance of finding help here on the phone with HP, or elsewhere online. I bought the X want February 2, 2013 local Office Depot. He has never run because of the GET go. Often freezing, never close properly unless I press the button for 5 seconds after clicking Close in power options. Sometimes, depending on the startup error messages saying something about the power of the core or something. I've never had to do no work around to use a computer.

  Has anyone got their desire x 2 PC 11 - g010nr to run the free error in Windows 8, it was designed to run under the operating system?

  If somebody has got an upgrade to Windows 8.1 and work still?

  HP support people, if you want to help save your breath. Go to the drivers of my model for 8 and 8.1. Is there no update driver dated 2014 and it still won't work. I bought my wife a Tablet 11.6 "Lenovo Lynx who can also use their keyboard dock which is optional. I didn't need to.  Lenovo posted 8.1 Windows drivers dated April 2014 and I updated his tablet with the same Atom CPU/graphics SoC as my x 2. I bought a Dell coming Pro 11 and it worked very well with 8.0 and even better with 8.1. Dell has prepared new pilots in a roll on their support pages.

  HP? No, no new drivers since almost a year ago. HP has abandoned this design hybrid great many too fast. So they come with HP Omni 10 with the same processor as my coming 11 Pro, quad core Atom Z3770, and the local Office Depot can not get their demo to run long enough without lock up and require a multi step reset to work again. My Dell and Lenovos designed for 8 has raced the 8 large, then ran 8.1 grand. I am not inexperienced in the tablets and the upgrade.

  I would just take the brain of one who got their 2 x to run the 8.1 and know how they did it.

  The drivers I used are located by scrolling to the bottm of THIS page, and then in the column of customer support, that the first category is to download drivers.

  That is, it becomes a bit difficult but must be specific with this pc, you have, but just follow the prompts and see if the best drivers are available for what you have.

  Because it worked for me AFTER that I upgraded to W8.1, it is preferable that you update first, then update the drivers.

• help (redirect) with the command center alien

  Hello

  I have a r4 aurora exotic and after a year and a half of navigation, I ran into several things over the past months, with that I hope I can get help.

  First of all, my PC crashes a lot. He began to when I'd come into my office in the morning to wake my PC up from sleep, and even if it is on, I would not get the monitor signal and failed to wake up. I thought it would be a problem with the mode 'sleep' and windows 8.1, so I disabled mode 'sleep', and yet, after leaving my pc to sleep for a while, I'll be back and his usually frozen. I need a hard reset at this point to continue to use the pc. Until very recently, it occurred only to leave my pc sleep, but now it happened after the closure of a game application.

  Perhaps in connection with the gel, my CPU fan has been very strong lately. Especially when the games. In the center of foreign control, for the system fan is bed 0 RPM and more about, it shows not even anything to indicate that I have a heat pump. I saw another command center of peoples where it shows 'pump' and said 'active' or what not screenshots.

  Please any advice is appreciated.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• HotSync with the Agenda

  My Palm T | X hotsyncs perfectly with my computer Win XP pro with each application except the agenda.  When the Agenda is selected for synchronization, desktop and handheld computer hangs at the point 2 of the 12.  Does anyone have a solution?  No, I don't use Outlook but uses the desktop 6.2.

  Thanks for your thoughts

  Tom

  Hello Tom_Gore, welcome to the Palm support community.

  This question was asked several times here... two ways to solve the problem.

  1 do a HotSync with the conduit for defined agenda on "Desktop replaces handheld.  This will write own copies of what you have HotSynced to your PC to your TX.

  2. download and install DBFixit to pimlicosoftware.com.  The free download will scan your TX for corruption and will fix some problems.  Others can request the subscription of the program to repair the damage.

  WyreNut

• When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal

  When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal termination of the program."

  This has happened

  A few times a week

  is after update of Firefox 3.6.4

  I have the same problem with Firefox 3.6.6 except that it also consumes massive amounts of CPU during the race. This version also adds a new process on your system. I am running XP and in the beginning I tried to disable some plug-ins. Always consumed too much memory. I went back to version 3.6 and the new process went, and the CPU consumption is way down. Something is wrong with the latest version of Firefox, I never saw behave this way. Revert to a previous version (Filehippo) and you will see the difference.

• AMD Radeon HD 6990 compatible with HP p7-1245 diamond? AMD Radeon HD 7450 Crossfire is the best?

  I play SWTOR with 25 mb internet and can't play on the spot. Just try to solve the problem of graphics agitated with the AMD Radeon HD 7450 card provided with the desktop HP p7 1245. Wouldn't be better to go with a configuration Crossfire or more powerful card like the diamond AMD Radeon HD 6990 or higher?

  Your system won't "Crossfire", "Hybrid Crossfire" or 'Dual AMD graphics card'... whatever you want to call. Only, the system has a PCIe x 16 location and uses Intel GMA on board. Here are the specifications of your desktop HP Pavilion p7-1245. According to specifications, your system has a 300 Watt power supply. To install anything but a low range graphics card, you'll need to replace the power supply. The Corsair CX500 and CX600 are highly recommended and favorite forum. For more information and advice please see Guide of Big_Dave for the selection of a discrete video card.

  Frank

• What CPU was delievered with the Satellite A210 - 11 p

  What the process type of TL - 56 in satellite A210 - 11 p, 65nm and 90nm?

  Who knows? Please tell me, thanks!

  null

  All I know is that the Satellite P210 - 11 p was delivered with the Turion64 AMD X 2 TL56 1.8 1600 CPU.
  Is the CPU code name: Tayler

  If you need additional information on this CPU, you can search the site of AMD.

  Good luck

• HP DV7-3063cl laptop PC: what is the maximum temperature for safe operation of the DV7 3063 cl with the upgrade of the 640 M CPU?

  I have recently restored a HP DV7 3063 cl laptop that died a hot mother (MB). I replaced the MB with a new Board of Directors of HP when the price has been reduced to $100, updated the CPU with an announced as new AMD 640 M and applied Arctic Silver on CPU and graphics chips. I put in 4 G memory cool, got the computer to work and installed Windows 10.

  The computer seems to run very hot and stopped twice from overheating during its first period of 2 weeks when it there was not a lot of calculating, fan was run at top speed at all times, and the laptop was high to allow good airflow below.

  According to the program of the Open Hardware Monitor, the CPU had reached 97-99 C a few times. I bought support cooling a player and that seems to help a lot, dropping the temperature to 20 ° C.

  What is the maximum temperature for safe operation of the DV7 with the upgrade of the 640 M CPU?

  Anything more than 90 c is too hot. You can specify the processor and the motherboard you have installed?

  Also if this from the Manual:

  Thermal paste is used on 1 CPU and heat sink section 2 that the services it. Thermal pads are used on the chip Northbridge 3 and 4, the graphical subsystem chip 5 contact Northbridge and graphics/heatsink contact 6. Thermal material replacement is included with all kits of spare parts of processor, heatsink and system board.

  So unless you have changed the cooling system to heat composed on the chip graphic you should have used a thermal buffer. Without the pad, it may leave just a small hallway and destroy the cooling properties. You can use a shim in copper or other piece of something metal to fill the void, but if you just put the heat sink down on the video chip you won't get optimal even with thermal cooling paste.

• ThinkPad T510 problem with the CPU frequency

  Hello
  I was a problem with the CPU frequency - in DC or battery it works 1/2 frequency (1196 MHz), but when my thinkpad plugged and is with battery it works OK (2400 MHz).
  Do you have any suggestions how to solve this problem.

  ThinkPad T510 (4384) intel core i5, 6 GB of Ram.
  Thank you.
  Best regards Nikolay

  What your seeing is actually normal and a result of power management settings. When it is on battery, the reduced CPU clock speed to improve the battery life and only increases in speed if a program requires processing power (games, adobe photoshop, CAD, etc.). If you wish, you can disable this feature by setting the "maximum performance" option in the Lenovo power management program and get into the bios and disable "Intel Speedstep" and similar power options setting. I hope this helps.

  -Brian