Can I expect to consult vSphere 1 update of the VCP - 410 exam questions

Similar Questions

• When can we expect a fix for safari crashing on the IPad?

  When can we expect a fix for safari crashing on the IPad? This happens whenever I have try to type in the browser window. I have tried everything supposed to be suggestions and nothing works. I use this for work and it's really frustrating!

  And you tried that to go to settings > Safari and disable Suggestions?

• Update of the screen below Newbie Question

  Hello friends and family,.

  I have a screen that displays a list of contacts with one button simple add to create a new contact. When the user clicks the Add button, and a user enters all required fields their infromation is sent to a Web server and stored. The screen is out and you are returned to the list of contacts screen. The problem is that the list is not updated with the last added contact.

  Where I should be referring to invalidate to get the contact list screen painted?

  May I suggest two perhaps simpler solutions.

  (1) onExposed()

  You don't need to update your screen until control is returned to it.  In this case, the treatment will call your onExposed() method.  When is invoked, you can check something to see if you need to update your user interface and if so, to rebuild.

  onExposed() is quite often called, so you need them to make sure that you update only if you need to filter.  For example, if you go into a detail in "view" mode screen, you do not, but if you go into edit mode, then the displayed data can be updated, so you may need to refresh your screen.

  (2) pushModal

  I do not use it because it uses one of the number of Threads each application has, but if you use pushModal, so you know when control is returned to you will have to update your user interface.

  Just a thought.  Could be useful...

• Configuration of the AUSST. How can I easily check (Mac) computers are updated from the server AUSST?

  I installed everything according to the recipe. Video Karl Gibson watched this probably five times.

  A server

  Users have AdobeUpdate.Overwrites file in place

  Everyone's updates (couldn't than before by themselves).

  How can I easily see that updates are downloaded from the server AUSST instead of directly from Adobe online?

  I found this on my own.

  The answer lies (on mac) in the/Applications/Utilities/Console

  Look in the sidebar to download Adobe

  DML.log

  Hope this helps someone.

  22/06/14 21:32:13:409 | [INFO] |  |  |  |  |  |  | 2867720 | The download file is http://.local:80/Adobe/updates/oobe/aam20/mac/AdobeExtensionManagerCC-7.0/7.2/setup .dmg

• How can simple trigger for verification of status update on the table... - I get upd sql then?

  Hi guys,.
  
  I need to do a temporary simple audit on all updates on a table.
  
  That's why I create a trigger for her...
  
  However, I need to capture the SQL statement to make the update as well... However I have no way to do it, because it is always replaced by a SQL code I run to get the SESSION ID...
  
  Here is the trigger...
  ----------------------
  
  create or replace
  alert_setting_trg relaxation
  before the update on user_alert_settings
  for each line
  declare
  number of v_sid;
  v_username varchar2 (100);
  v_osuser varchar2 (100);
  v_machine varchar2 (100);
  v_program varchar2 (100);
  v_module varchar2 (100);
  v_prevsqlid varchar2 (100);
  v_sqltext varchar2 (100);
  
  Start
  SELECT SYS_CONTEXT ('USERENV', 'SID')
  IN v_sid
  FROM DUAL;
  
  SELECT the username, osuser, machine, program, module, PREV_SQL_ID
  IN v_username, v_osuser, v_machine, v_program, v_module, v_prevsqlid
  SESSION $ v where SID = v_sid;
  
  SELECT sql_text
  IN v_sqltext
  V $ sqltext
  WHERE SQL_ID = v_prevsqlid;
  
  INSERT INTO alert_settings_log
  VALUES (sysdate, v_sid, v_username, v_osuser, v_machine, v_program, v_module, v_sqltext,: new.user_id,: new.service_grp,: new.alert_setting_id,: old.alert_active,: new.alert_active);
  
  end;
  
  
  Now the problem is that...
  the capture of SQL statement will always be
  
  SELECT SYS_CONTEXT ('USERENV', 'SID')
  IN v_sid
  FROM DUAL;
  
  
  and not the UPDATE table statement.
  
  1st quarter) I have to get the SID of the session before I could know what SQL it is running.
  
  However, once I get the SID, the SQL to UPDATE the SID is run changes the SQL that gets the SID.
  
  What can I do?
  
  Rgds,
  Noob

  Instead of to the request in three steps, do it in 1. Replace all three of your queries with something like:

  SELECT s.username, s.osuser, s.machine, s.program, s.module, q.sql_text
  INTO v_username, v_osuser, v_machine, v_program, v_module, v_sqltext
  FROM v$session s, v$sql_area q
  WHERE s.sid = SYS_CONTEXT('USERENV','SID') and
        s.prev_sql_id = q.sql_id
  

  John

• Take the first vcp 410 review then training for vsphere 4.1

  Hi all

  I have 5 years hands on experience in field of VMware. I want to take the first VCP 410 review and formal training.

  My doubts, it's if I passed the exam, should I expect at least some reports saying that you went into vcp 410 as it or what evidence should get after I took the vcp-410 exam (could possibly want someone attah sample report like that).

  Why I ask? because I'm going to a formal training through my company after two months before I finished the atleast certifiation will be added benefits for me in my customer to place as well in my professional career, also think that the next level of VMware certifications.

  Thank you for your response in advance.

  You can meet the requirements of secure Channel in any order. So, first take the exam if you want, but as others have said you won't get a VCP, thus so you won't have no official recognition or paperwork VMware until you have taken the training as well.

  If you don't pass the test, I would recommend that you attend to the vSphere: Troubleshooting courses - it also qualifies for the VCP certification and should learn you a lot more than the vSphere: install configure manage course given your experience.

  Scott.

  -

• Can we expect an update for Muse soon?

  Four months have elapsed since the latest update to Adobe Muse (CC 2014.2 version). Can we expect a '. '. 3' update anytime soon?

  Muse had a few nagging problems that must be addressed, such as issues with SVG, I mentioned several times in this forum. I don't know how complicated the issues with SVG are to fix, but it's a good bet that bugs are easier to address than some other feature request - like so many people willing to sensitive layout.

  In the last Muse has had many updates, usually once every two months or maybe once a month. Muse users are now kind of prolonged drought, in expectation of some fixed bugs. I hope we get at least another point release update or two between now whenever the next full version, CC 2015, is released.

  Short answer, "Yes, soon."

  If you want to be more aware of what is part of the next version of prior of Muse for free and have the opportunity to provide feedback on the product under development, the Adobe Muse beta program is open to all active subscribers who accept the terms of the non-disclosure agreement. You can join by visiting http://museprelease.com

• A program respond with code exception 0xc0000005 after I did an update of the window.

  Original title : A single program stop responding after that I did an update of the window.  How can I solve this?

  After that I did a windows update, a program does not work.  I try to bring it to the top and it says pmast MFC Application has encountered a program and must be closed.  When I look at the report of what is sent, it gives a code of 0xc0000005 exception.

  Hello Kevinsbabydoll,

  Thanks for the return of the response.  Are you able to perform a system restore, sometime before the Windows updates?  If you can do this, I'd install each update at the same time to confirm your program still works correctly.

  Windows XP system restore

  http://TechNet.Microsoft.com/en-us/library/bb490854.aspx

  Thank you

  James

• I get a notification to update when you sign in to firefox. When you try to update you get the message "connection to Server", which can go about 4 hours and never update

  I get a notification to update when you connect to firefox on my mac. When you try to update, I get a message "connect to Server" which can go over 4 hours and never update. It is most annoying. How can I remove that annoying popup which does not in any case all in ensuring that I have updated to the latest version?

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• I can't start my computer after installing updates to manualling

  This happened almost a year and once from time to time I revisit the issue to see if I can find a solution.

  I tried to download the new version of Windows Live Messenger. Installation did not work because I needed a certain update. This hard drive (I have several) was not install updates for a while. Up to this point, I just thought it was a nuisance, but not a major problem. Because my computer would not install the updates on its own, and I needed a special update for the new Windows Live Messenger, I went online to find the update to install. I got the update ID (I don't remember what it was) so I quickly found and installed. Everything seemed fine until I restarted my computer - or attempted to guess - after installation. My computer won't start. I get a screen asking if I want to start Windows normally or start windows repair.

  Here are some of the things I've tried so far:

  Start Windows normally: a screen comes up saying something about checking the disks and it is recommended that you do not stop the disk check. I do not have anything and immediately it says that the disk check has been arrested. He stays on this screen infinitely - believe me I left on this screen for hours.

  Repair Windows: I used windows repair in the past for other problems and it worked wonderfully. This time I click to run windows repair and I go to a blue screen with the background of the blue sinuous line of vista but there is to this and nothing comes up.

  Safe mode (and any version of safe mode): when starting, I pressed F8 to start the extended options. All safe mode options lead to the same thing. I get a list of drivers and it says please wait... It always gets stuck on \windows\system32\drivers\crcdisk.sys and it is going nowhere.

  I tried almost all the options in the F8 menu and they all be given the normal startup problem or safe mode

  I then tried to do a repair of my disk of vista system. This time - unlike the previous attempt to repair windows - I got the menu normal repair. Unfortunately, the repair "attempted to correct the disk error" during more than 15 hours. I then shut down my computer, once again beaten by my computer.

  I always use this computer with other drives with no problems. Thus, it is certainly a problem on the hard drive and must be associated with the update I installed manually before this problem.

  Help, please!

  Hi, EMP,.

  Since you are unable to boot into safe mode and unable to repair the system, you can try to boot from the Windows Vista disc and try to perform a system restore.

  Method 1: Try to perform a system retsore.

  For more information, you can consult the following articles:

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  What are the system recovery options in Windows Vista?

  Method 2:

  If you still experience the problem, then try to perform a checkdisk to repair bad sectors on the hard drive.

  You can boot from Vista disk full or to run Checkdsk select command prompt from the System Recovery Options menu.

  a. Insert the installation disc.

  b. restart your computer.

  c. click on the Start button, click the arrow next to the button lock and then click on restart. If you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.

  d. choose your language settings, and then click Next.

  e. in the System Recovery Options menu, click command prompt

  f. at a command prompt, type the following command and press ENTER

  Chkdsk /f /r X: (drive letter)

  Note: When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  g. press y when you are prompted to check the drive the next time the system restarts.

  h. close all applications and restart the computer.

  Note: When you run the disk check, there is a chance of losing the data you can take a backup before starting the checkdisk.

   Hope this information is useful.

• Windows 7 drivers - can they expect?

  I would like to put Windows 7 on my S10-2 and, as a Microsoft partner, I have access to W7 - but it is not all the drivers posted by Lenovo.

  When can we expect to see the Windows 7 drivers posted on the Lenovo site and this which are people who as workarounds?

  Thank you!

  H

  Hi ghchinoy welcome to colorado...

  Windows 7 knows most S9/10 (e) - 2 material of the series directly via install... wireless lan audio player cards... through Ms. windowsupdate just video...

  Thus only

  Establishment (driver Vista Y IP series)...

  Touchpad (all systems)

  Bluetooth (Vista TP Driver) should be installed manual...

  But I think that sooner or later Lenovo publish official drivers for IP S-Series or comes through Windows 7 update...

  My S10e works well with the multiboot - system (XP Prof (+ Quickstart)., Ubuntu, Windows 7 RC)

  waiten for my copy of windows 7 Final...

  cordially KalvinKlein

• When can we expect OptiPlex 9040?

  Hi all

  The Dell OptiPlex 9020 came out for almost 3 years. Does anyone know how Dell could release a new Skylake OptiPlex 9040? Dell did that recently updated 3xxx lines and 7xxx OptiPlex, so can we expect a new line of 9xxx soon?

  EDIT: I noticed that the 9020 series now appears under the threshold of 7xxx on Dells site. Is that means the 7040 replaces the 9020?

  See you soon

  I just talked to our Dell account manager and he advised the 7040 replaces the 9020. That doesn't put the OptiPlex model number more in line with the model numbers of Latitude.

  And for any application, like when quiring on the 7040, the Dell OptiPlex 7040 supports two DisplayPort ports as an option, so 1 x HDMI, 2 x DisplayPort and an optional VGA port.

• After the update of the app, can not read the store persistent on some devices

  Hello

  I have a problem in an application I was able to reproduce in a simple test application.

  The test application writes some info in the persistent store, then can read back and it seems to work fine.

  If I change the version number of the application, then download the new version (by downloading a jad file in the browser), he invites me to replace the old version w / the new version, which I confirmed. After you download the new version of the app, he invites me to reboot the device, what I'm doing.

  On most of the devices I tested this, after the reboot, when I run the app update, it works as expected - it can read the value written in the store persistent by the earlier version of the application.

  However, on some devices, it is unable to do.

  Debugging a bit, the error occurs when you try to get the object persistent via:

  PersistentObject po1 = PersistentStore.getPersistentObject(MY_KEY);
  

  This survey line an exception - exception message is simply 'null '. I don't know what is precisely the type of exception since it is a static method should not throw any exception that as far as I know, so I'm just catching a generic java.lang.Exception.

  The same - in the version update of the application, if the software tries to write to the store persistent by using the ID of the object, the result is the same - the call to getPersistentObject throws an exception "null".

  Note that I'm not changing anything this either on the object that is saved in the persistent store, and I'm not changing the identifier of object between the versions of the application.

  A device on which I can reproduce this issue systematically is a Blackberry 9800 (Torch) running 6.0 Bundle 2647.

  Any advice or suggestions how to debug this appreciated.

  I tried to reproduce this on a Blackberry 9800 (Torch) running 6.0 Bundle 2647, identical to what noted you above but find the code example you posted worked well.  Were there other changes between the versions other than increment the version number?

  Is - what happens on multiple devices or just one?  If it is just a device you can try to reload the software of the device in case anything is damaged.

• Update of the device: underlying operating system far can be updated?

  I'm fighting to get my hands around the ability to update device, which is impressive, to be sure.

  Let's say I have build devices following, all using the same application:

  1. CentOS 5.3, Application version 3.0

  2. CentOS 5.3, version 3.1 Application

  3. CentOS 5.4, Application version 3.2

  4. CentOS 6.0, version 4.0 Application

  I know I could install #1 and update # 2 without any problems (other than those posed by part of my app, of course).

  I expect that I could then update # 3 without problem, probably?  I am not sure if RedHat/CentOS dot releases are something to the RPM level that can support the update.

  A more interesting question would be - could I update #3 à #4?  I doubt it, since I don't see that you can update CentOS 5. anything for CentOS 6. anything by just RPM installs, and it seems that the ability to update VMware Studio device is driven out of RPM.  Although there might be something else that I have not yet triggered in my experiences.

  What will happen if I ran #3 and looked for updates?  He could direct me to #4?  He would try to do and do not, work, or what?

  Thanks a lot if someone knows about it.  If there is a place I should read these things, I'd like a pointer, as I have not been able to find out information at this detailed level other than on this forum.

  Thanks again.

  #2-> #3 should be fine.

  #3-> #4, Studio update feature you would ban not to, because all of the updates are based pkg as you said, you could however meet other issues such as the incompatible commands, libs, etc. This isn't a use case recommended by Studio for (which includes major improvements to the OS).

  As long as the Repo to update that points to the device to a matching, VendorUUID, ProductRID, name of the device and one more great appliance Version appear available, the update executes the script of prior update, download the packages and try to install and run the update script. With regard to the question of whether this whole process was successful or not, depends especially how to install pkgs.

• Where vSphere Host Update Utility?

  I installed ESX 4.1.0 (build 260247, free) and the vSphere Client. I searched for hours, but can't find the vSphere Host Update Utility 4.0. I don't have a chance to add it in the vSphere Client Installer.

  Thank you

  Hello

  According to this blogupdate utility host that installed with the vSphere Client is now gone in 4.1.

  HTH

  Marek.Z