can I get my Microsoft Photo Editor to transfer to Windows 7

Similar Questions

• I've recently upgraded to El Capitan of Lion.  My iPhoto library is also transformed into Photos.  In iPhoto, I used Photoshop as my editor in Chief of "standard / default.  I can't do that to work with Photos, all I can't get is the photo editor.

  I've recently updated to Lion at El Capitan and my library of more than 40 000 iPhoto was also improved (?) photo.  He ran all night.  I used Photoshop as my editor of "standard/default" in iPhoto, but now I can't seem to appear in the photo is the photo editor, which is not enough for my purposes.  I have found a workaround that requires images to export], edited and then re-imported to the Photos, but I lose all the original images.  Can I have Photoshop become my default editor for Photos, as if it was in iPhoto?

  3rd party editing application must be updated to work with the new structure of the El Capitan and Photos before they will be able to work seamlessly with Photos.

  In the meantime we must export the original file in the office using the menu option file ➙ export Original unmodified for 1 Photo and edit the file there.

  

  

• How can I get rid of Microsoft Photo Editor 3.01?

  How can I get rid of Microsoft Photo Editor 3.01 from my computer? I use windows Vista. I can't find the program in my Add/Remove Programs list. could someone please help. Thank you

  How can I get rid of Microsoft Photo Editor 3.01 from my computer? I use windows Vista. I can't find the program in my Add/Remove Programs list. could someone please help. Thank you

   
  ===================================
  The copy of MS Photo Editor 3.1 I have on my system
  should not be installed/uninstalled.
   
  When you run the .exe (microphotoed.exe) files are
  unzipped in a folder of your choice and the program
  runs from there.

  To get rid of it... just delete the files/folders.

  There are 14 files in all:

  microphotoed.exe (this is the file to download)
  CHALKCHA. DLL
  EMBOSS. DLL
  GRAPHICP. DLL
  NOTEPAPE. DLL
  PHOTOED. CNT
  PHOTOED. EXE (this is the executable file)
  photoed. GID
  PHOTOED. HLP
  PHOTOED. GIS
  STAINEDG. DLL
  STAMP. DLL
  TEXTURIZ. DLL
  WATERCOL. DLL

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• ERROR READING FILE in microsoft photo editor

  I get this message if I try to open an image (new or old). To my knowledge we are not doing nothing differently when we load the digital camera. Here are JPEGs. The help topic makes no sense because the guests do not match my guests of computers. I can't find Office 2000 or Microsoft Photo Editor under programs in Control Panel. I thought that perhaps a uninstall/reinstall would be useful.

  If you prefer to continue using the Photo editing software...
  I have no solution for you. Maybe
  someone else offers you assistance.

  BTW... If you do not want to change your image
  as explained in my previous associations
  message... try to access your photos from
  your folder my pictures and not from Photo
  Editor in Chief.

• Problem with Microsoft Photo Editor

  I have thousands of photos on my PC (Vista/IE8) I could see without problem for years. But suddenly, even if I'm still able to import new pictures, when I try to open them I get the following message: Microsoft Photo Editor - error reading the file.

  But this seems to apply only to photos, including those that I have seen in the past, taken on my current camera, a Panasonic Lumix DMC - FS7. Everything else seems to be affected.

  Also, oddly enough, I can see the photos in slideshow mode!

  I would appreciate a solution.

  Hello
   
  Microsoft Photo Editor is supplied with Microsoft Office 97 and the stand-alone versions of Microsoft Word 97 and Microsoft PowerPoint 97. Microsoft Photo Editor is installed when you perform a custom installation, or full from the CD-ROM.
   
  What is the format of the files you are trying to view?
  The link below talks about Photo Editor. Try to look at the troubleshooting section in the article below
   
  General information about Microsoft Photo Editor:
  http://support.Microsoft.com/kb/169938
   
  If you have still questions I recommend checking out the resources of the Office Suite and would be better suited to the community of the Office Suite. This is a support forum for Windows Vista. Please visit the link below to find a community that will provide the support you want.
   
  http://www.Microsoft.com/Office/Community/en-us/default.mspx

  Aziz Nadeem - Microsoft technical support. [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Microsoft photo editor is no longer works do not know where to reinstall

  Microsoft Photo Editor no longer works. I don't know what the Windows XP disc to reload. I suspect Photo Editor was is lost when I deleted a trial version of Nero Essentials or via a virus until I subscribed to McAfee.

  Hi MichaelRyan100,

  ·         Are you referring to Microsoft Office Photo Editor?

  ·         You see it in the start menu?

  ·         What happens when you start?

  If so, you can consult the following articles and see if they help.

  Photo Editor is removed when you install Office 2003, Office 2007 or Office 2010

  What happened to the Photo editing? -Support - Office.com

  You can also post your request on the Forums of Office Microsoft answers here.

  If this isn't the case, then respond with more information so we can help you better.

• How can I get my camara photos card to import into my computer

  Original title: How can I get my camara photos card to import into my computer - when I insert the card, the pop-up window does not come to the top so can I import my photos in the photo library.

  I used to be able to insert my card camara and a pop up appeared to choose how I want see my photos.  Now, nothing happens.  I can't understand what I'm doing wrong.  Any suggestions?

  Hello
   
  You did it changes on your computer before the show?
   
  If the dialog box asking you to import your photos does not appear when you connect the device to your computer, AutoPlay can be disabled.
   
  Open AutoPlay and check if it helps.
   
  Activate autoplay: Hold down the SHIFT key when you insert devices or media into your computer to open AutoPlay, regardless of the default setting.
   
  Otherwise, you can import your pictures using Windows Photo Gallery:
  Here are the steps:
  a. open Windows Photo Gallery by clicking on the button Start , allprograms, and then clicking Windows Photo Gallery.
  b. on the toolbar, click fileand then click import from camera or scanner.
  (c) in the dialog box import images and videos , choose your camera from the list of devices and then click import.
  
  For more information, you can check the link below:
  How can I get pictures from my camera to my computer?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

• Vista v's Microsoft Photo editor

  I just installed Windows Vista on my computer and want to put my program on which is Microsoft Photo Editor of photo editing. While he seems to have loaded ok, some functions do not work as they did on XP, such as opening certain files, smaller images being generated.

  Hi stephenforster

  Thanks for posting in the Microsoft Community.

  I understand that you are facing the issue with Microsoft Photo editor that some functions do not work.

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2:

  The link below talks about Photo Editor. Try to look at the troubleshooting section in the article below

  General information about Microsoft Photo Editor:

  http://support.Microsoft.com/kb/169938

  If you have still questions I recommend checking out the resources of the Office Suite and would be better suited to the community of the Office Suite. This is a support forum for Windows Vista. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/default.mspx

• My back upwards only made last month on photos? How can I get my entire photo library saved? I have a lot of storage iCloud.

  My back upwards only made last month on photos? How can I get my entire photo library saved? I have a lot of storage iCloud.

  Re synchronize you photos with iCloud? If so, these pictures are not saved.

• I still can't get a panoramic photo to work on iOS iPhone 5s 9.2.1

  I still can't get a panoramic photo to work on iOS iPhone 5s 9.2.1.  Any solution (s)?

  How would you like that give us for you solutions when you provide the details, like what happens when you try?

• How can I get my 12 items Editor to open in El Capitan on mac? It signals a problem. As suggested by the Apple support, I've trashed previous preferences and tried to restart, but to no avail. I was told to return to the preferences of the trash and c

  How can I get my 12 items Editor to open in El Capitan on mac? It signals a problem. As suggested by the Apple support, I've trashed previous preferences and tried to restart, but to no avail. They told me to return the trash preferences and contact adobe.

  Adobe has not yet been able to offer suggestions of what-so-ever, aside from telling me that it is there no real person for this product customer support and that I should try this forum. I hope that, apart from the many people with the same problem, there may be even one person out there with a solution!

  I bought the Publisher of 12 elements in March 2015 on the Apple App Store. Apple has confirmed that there is absolutely nothing wrong with my Mac. He has had problems since bought and installed on Yosemite, now the new O.S. El Capitan is installed, and 12 elements editor now refuses to open at all.

  My opinion is that if Adobe and Apple do not provide professional support for the products they sell to us, then they should say at the outset that there is no support for these products. This is not the first time that I was sold an adobe product that doesn't have any product support, product durability or reliability of product.

  If all goes well there's someone out there who can help me!

  Thank you!

  Mr.L.

  Little Giant Productions.

  As you have the version of the App Store, you will need to re - install. Your download should always be available in the Mac App Store under "purchases".

  Apple has had problems with security certificate expired affecting all applications downloaded from the Mac App Store. Here's a solution that worked. Give it a try by following each step:

  I had the same problem on the Mavericks and your suggestion worked for me.  FYI, I deleted the items, empty trash, disconnected from the App Store, restarted the computer, signed in to the App Store, then downloaded items.  I use OS x 10.9.5 and 11 elements.  Hope this helps!

• New items 14 converted 13 and renamed catalogue catalogue 13 items. Now, I can't get either (1900 photos)? BobR

  New items 14 converted 13 items and renamed catalogue catalogue 13 items.  Now, I can't get either (1900 photos) how to recover?

  bobreie wrote:

  New items 14 converted 13 items and renamed catalogue catalogue 13 items.  Now, I can't get either (1900 photos) how to recover?

  What happens if you try to open the catalog to 14 items? You get a message? You can always start the Organizer while keeping the SHIFT key and choosint of "repair" or use a new catalog.

  If you open the former organizer of 13 elements, the catalog should open fine, even if it has been renamed.

• Impossible to get in the photo editor

  When I try to go to the photo editor that I sign in I have to do to get to the photo editor and why I registered my software

  More necessary info. What version of the EP and what operating system?

• How can I get around having to sign into my account (Windows Vista 7) during startup as I forgat my password?

  How can I get around having to sign into my account (Windows Vista 7) during startup as I forgat my password?

  Hello Bob Zientak,.

  If a password is required to log on your system, then you won't be able to cirumvent it. Unfortunately the users of this forum are also not allowed to suggest ways to help you bypass (hack) the password (3668Microsoft Terms and Conditions).

  Remember passwords are case sensitive so maybe that you type a password in the case of bad? Did you create a password recovery disk when you created your password first? If Yes, then you must insert the password recovery disk to allow you to change the current password. If you did not create a password recovery disk then the next and more radical, opion is to re - install Windows.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• How can I get a driver for printer Canon I455 (my windows vista 32)

  How can I get a driver for printer Canon I455 (my windows vista 32)

  You can get this support from Canon... If they chose to take over the device in the given operating system.

  Looking at the Website of Canon's Support for this printer and select your operating system, they * sentence * support with your particular operating system.

  "This software is a module that extends the functionality of the printer driver for Canon inkjet printers. Your printer must be installed through Microsoft Update before you download and use this module. »

  So, basically install you by choosing to look on the Microsoft Update site when you try to install the driver.  It will download one Cannon gave to Microsoft after the release of Windows Vista.  Then, you restart and download the other file (on-site support) to give you more features.