Can I go by Satellite L100-109 with an internal webcam?

Similar Questions

• Satellite L100-109 starts a new after memory upgrade

  How can I get my Satellite L100-109 to take the 2 GB of memory is it supposed to be able handle.
  It keeps starting over and over again.

  Can you please provide some info on the RAM modules that you use?
  Usually if you use high quality compatible products, you will not have these problems.

• Satellite L100-109 - display sometimes very dark on restart the standby or startup mode

  I have a new L100-109. When he goes to sleep, and then I restart, the screen is very dark, it is unreadable. The only way to remedy this is to re - start the PC.

  This sometimes happens at startup upward as well, and I have to reboot to get back on the screen.

  Does anyone have any suggestions?

  Hello

  Looks like the backlight of your screen will always be activated.
  I don't know the reason for this, being sometimes reinstall the whole system can solve problems like this.

  Good bye

• Can I go through Satellite Pro 4300 with disk HARD mk8032GAX?

  Hello and thanks in advance. The question is: can I upgrade the hdd by default in satellite pro 4300 with mk8032GAX model?

  (Sorry for my English)

  Concerning

  The question is whether the laptop and the BIOS is able to manage the size of the HARD drive.
  The mk8032GAX is a 80 GB, 2.5 HARD disk at 5400 RPM and 8 MB cache.

  I discovered that this laptop supports these drives:
  5,59 GB Toshiba MK6414MAP, Toshiba MK6411MAT
  11.2 GB Toshiba MK1214GAP
  16.9 GB Toshiba MK1814GAV

  Perhaps also a 30 GB might be compatible, but to be 100% sure, a test is necessary.

• Satellite L500 - some problems with the internal webcam

  Hello.

  My L500-13v is a little over a year old, but from the beginning, I'm having a lot of the built in ' USB 2.0 webcam» Sometimes it works, more often, is not, sometimes, I try to open the camera app and it says "device is locked by another application" despite not using any other application in time. When I try it on Msn or other applications, I just either get a black screen or "no device connected". I also get a pop up saying "this device can operate more quickly if connected to a hi speed usb 2.0 port" so I wonder if Toshiba have connected the camera of 2.0 to a 1.0 port internally, (at the time I thought not usb 1.0 was even used.) In Device Manager, it lists six standard usb host controllers and only two controllers to improved host 2.0). I used to always get that when I take the computer off the sleep mode. However I always stop instead of sleep, but its still a very regular, even when I use the cam, it can suddenly gives me this message and then stops working. Recently, when I click to open ""Toshiba Webcam Application"I get a blue screen saying"irql not less equal"which according to me is a hardware error." and then it auto restarts.

  This laptop is preinstalled with vista, the webcam using a microsoft driver. I contacted toshiba about this problem last year, but they only told me to install the application driver 'web cam' on their site which I had already tried in safe mode and normal mode, I do not know why they give just a standard INF file. Vista will automatically pick up their driver and continues to try to reinstall the microsoft one, I finally managed to install the driver of toshiba by manually choosing Select a driver from the list, unchecking, show compatable drivers and finding Toshiba and PanGu, but after that, I still have the same problem.

  I hope that someone more knowledgeable than me can help me with this, thanks.

  Hey Buddy,

  To be honest, I would also reinstall the webcam driver but maybe you did something wrong

  So in your case I remove the current version of the webcam software and then restart your laptop. Now clean the registry using the freeware CCleaner tool which is a really nice tool to clean the system and delete the incorrect registry keys. After that, restart the computer and install the new software of the webcam of the official website of Toshiba.

  Normally after this procedure your webcam should work properly again.
  If this is not the case you should try a recovery facility, maybe something is blocking the the webcam driver who knows

• Can I put the Satellite L505-144 with a SSD?

  Hello

  Anyone know if the Toshiba Satellite L505-144 can be improved with a SSD?

  Thank you

  Chris

  Of course you can replace with a SSD SATA 2.5 drive HARD internal disk.

• Can I go by Satellite 2410-303 with 120 GB of HARD drive

  Hello
  I have a Satellite 2410-303 (acquired in 2002) with a 30Gb HD (MK3018GAS, 4200 RPM).

  I want to upgrade this drive with a Toshiba one with 120 GB (MK1234GAX, 5400 RPM). These HDs have the same type of bus, so it should be no problem with that, but how do I know if the ability will be recognized by the BIOS, and if there is no heat problem?

  Thank you for your response.

  Laurent

  Hello

  The heat should t be a problem, but the size of the HARD drive. It s a really huge difference between 30 and 120 GB.
  In my opinion, the BIOS will not recognize the HARD drive, but I can't say for sure
  So I recommend that you test it HARD and please we report the results

  Someone has updated the old 1700-400 Satellite with 80 GB HARD drive, and it works!
  Maybe your 120 GB HARD drive will work also successfully crossed ;) finger

• Can I put the Satellite P100-240 with internal fingerprint reader

  I have a Satellite P100-240.
  Although he did not come equipped with material to print finger scanning, it has clogged the hole in the box where he would go.
  So I wonder, can I get the hardware scanning separately and adapt it to the laptop?

  I don't see any option for the material to be sold separately on the Tosh site and I'm not even sure who makes the hardware for them so I can source it independently.

  Can we offer here advice or information on this operation?

  Hello

  You are right. Some P100 units support the fingerprint, and some units have been delivered without this feature.
  As I m not wrong not these fingerprints can be upgraded

  But to be 100% sure you should ask the local ASP (authorized service provider) for details.
  But in my opinion you can not put the laptop with fingerprint reader.

  Good bye

• satellite P30-109 with atheros AR5004G will hang the PC

  I have a P30, and when I'm on the internet of card wireless wil hang itself together with pc.
  When you restart the pc, it gives an erros:
  "conflict with pci slot 3 (pci bus 2, device 2, function 0).
  the only thing that helps is to screw open the pc remove the card wireless integrated, wait a second and mount it again. then wait a few hours until restart it wil happen again: (.)
  and start over al.
  some time, I'm lucky that I don't need to reinstall everything again but I get a little more on tires of this and I did not beleave it is normal.

  I also installed the last andso on drivers please help me

  Peter-jaap

  Hello Peter

  It is of course that there is a hardware conflict. I really don t say what you can do to solve this problem.

  If you want to be sure if there is everything well built into the Atheros card and reinstall the OS using the recovery CD. On this way, the operating system will be clean and after the first start will be detected and properly recognized all hardware components.

• How can I reinstall the Satellite L300/OVK with Vista 32 bits as being its 64 bit now

  Does anyone know how I can reinstall a L300/OVK NB with Windows Vista 32 bit.
  The problem is that it is 64 bit at the moment and I can't install software on it. I don't have a Windows installation CD.

  I contacted the store that I bought in and they said to press f12 or O when the computer is put in place.

  However, this does not work. Anyone know what I can do to install my software?

  Run the Toshiba Recovery Disc Creator. There should be an icon on the desktop or in the Start Menu.

  If she creates more than 2 DVD x, then you will have the option of 32-bit or 64-bit when run you recovery.

  To run the recovery from the HARD disk:

  When the laptop is OFF, press and hold the Zero key.
  Turn on the laptop
  Release the zero key when you see the Toshiba Logo.

• How can I use my Satellite A100-233 with adapter only?

  The user guide says that it is not a good idea. And once a month I have to unplug the AC adapter and only work from battery. I use my laptop in one place, so it is easy to use only AC adapter.

  Hi Denis,.

  There is no problem; em with you just by using the a/c adapter if you wish. The reasoning behind the recommendation in the manual is to maintain the battery in optimal condition. To do this he must sometimes fully discharge and then charge again.

  If you do not want to use your laptop on battery alone, then just leave the power adapter attached. This can result in a shorter battery life, but should not be a problem for you since you're using your laptop on AC power.

  Kind regards

• Reinstalling Windows Satellite L100-109

  Try to reinstall Windows XP. All I get is an error loading operating system error msg.

  Can you please what exactly do you do and how you try to reinstall Windows XP Home edition?

• S50-B-12Z - sleep and charge satellite interferes with built-in webcam

  Hello
  I have a Toshiba SATELLITE S50-B-12Z with Windows 8.1.
  Recently, when using Skype, the built-in webcam has stopped working.

  At first, I thought it broke, until I tried to use the camera application.
  This app does blue light and work the webcam, but for a second, then the Toshiba sleep and load the application is passed in and stopped and it starts to alternate between the camera and the blue light and the small window of sleep and the load.

  So, with no remedy for this situation, I tried the recovery option to get factory settings, same question once again, alternating between the camera and sleep behavior and load.

  I tried a refreshment and uninstall the Toshiba sleep and load the software and alternative behavior stopped, but now the webcam does not work. Update another and the same all over again.

  I'm not an expert, but for what I see the webcam is related, in this model, for the USB hardware, so I think that sleep and charge feature interferes with the web cam (even when the software is uninstalled).

  Ideas for this problem?
  Thank you in advance.

  Bujar

  Hi Sonia

  To be honest, I don t think that sleep & service or this service would affect the features of webcam.
  TOSHIBA sleep utility allows you to charge USB devices such as a cell phone with the computer in standby mode or even stop mode. This is why there should be no link between this function and webcam

  I can't say with certainty what's going wrong with your internal webcam but the fact is that in many cases the webcam and sleep function & load could be turned on and off in the BIOS.

  In my opinion, you should perform a few checks.
  First set the default BIOS settings (load default by pressing F9) and check if the webcam is enabled in the BIOS.

  Second if you think that there is still a link between sleep and charge function and the webcam, then disable the sleep and the load in the BIOS, just to check if it will make a difference.

• Satellite A50-109: CD burn successfully but the disc is empty!

  After working fine for a year, I get this weird behavior my CD burner:
  Burn process ends seccessfully but the disk is empty.

  I use a laptop model Satellite A50-109 with winXP pro sp2 installed.
  Driver Toshiba is recognized by XP and everything seems to work fine except the drive is still empty.

  This phenomenon is the same when using original burner XP or Nero.
  So, seems to me like a hardware failure.
  Am I wrong?
  Is there a way to check the material before applying it to the service provider?

  Thanks for your attention
  REA

  Hello

  Have you tried burning different media?
  Not all CD or DVD is compatible with the player.
  Usually, you should find tested and compatible media in the user manual which must be preinstalled on the laptop.

  I m not 100% sure, but as far as I know the reader doesn t write on + media
  I recommend you to test some different manufacturers of disc form.

  Just FYI; I use TDK and I m very happy.

• Satellite L300 - how to install the webcam software?

  I have a Satellite L300 with an internal webcam. Recently I had to install a new HARD drive. I didn't have a recovery disc, so I just installed Vista on it.

  Is there a way I can install the webcam software?

  Hello

  I also have Satellite L300 and you can download the software of the webcam from the Toshiba page directly. Just follow this link and clicks:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Everything you need you will find! ;)