Satellite L100-109 starts a new after memory upgrade

Similar Questions

• Satellite L100 113 starts slowly after upgrade memory

  Hello

  Toshiba Satellite L100 113 PSLA3E-02401JRU starts slowly after upgrade memory with Kingston KTT533D2-512 (512 MB) of memory.
  When I press the 'power' button, it flashes, starts the fans and HARD drive several times. Then it shows BIOS start messages by memory full 768 MB and starts Windows XP without a problem.
  This behavior is noticed only after "shut down."
  It does not happen with "restart".
  What can I do to eliminate this long "attempts" to start my laptop computer?

  Thank you
  Novomir Kovalenko

  Hello

  This problem appears before upgrade memory?
  Have you used exactly the same memory modules?
  If this isn't the case, then perhaps there are a few compatibility issues.

  Usually, after the insertion of the modules you must enter the BIOS and then save the settings. Please it and eventually the laptop will start without any problems.

• Satellite L100 series starts the error message

  I have a Satellite L100 series PC laptop I've had for a few years now and he's got a problem. When I boot it it goes as far as the windows loading screen then flashes blue for a mili second then restarts. I try to start safe mode, and it produces a long list that has the following text:

  Multi (0) Disk (0) rdisk (0) partition drivers then sys various titles of files. After that it appears for a minute or two then restarts again.

  I searched the web to find what is the problem and the general answer that I can find is that the hard drive is faulty. I also found that the BONE may need to reinstall I try first before buying a new hard drive.

  My question is this:

  Can anyone confirm that this is the hard drive which is a failure?
  If Yes, is this the right hard drive for the L100 series laptop PC: http://www.ebuyer.com/product/145130

  Any help is very appreciated.

  Thank you very much

  Hello!

  Yes, it could be that the HARD drive is faulty.
  So I would check this with a special tool.

  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
  On the same site is a user's guide if you want to know more.

  Good bye

• Satellite L100-109 - display sometimes very dark on restart the standby or startup mode

  I have a new L100-109. When he goes to sleep, and then I restart, the screen is very dark, it is unreadable. The only way to remedy this is to re - start the PC.

  This sometimes happens at startup upward as well, and I have to reboot to get back on the screen.

  Does anyone have any suggestions?

  Hello

  Looks like the backlight of your screen will always be activated.
  I don't know the reason for this, being sometimes reinstall the whole system can solve problems like this.

  Good bye

• Satellite P100-219: overheating after memory upgrade

  Hello guys,.

  I've recently upgraded to 4 GB RAM in my laptop, and he did it again.
  Computer laptop stops immediately after awhile. CPU or GPU gets really hot. Works fan CPU, GPU was not used intensely. Simple web browsing/cat/emailing.

  What becomes hot however is part to the left of the memory/wlan compartment. Is it possible that a chipset gets hot after just upgrade memory?
  I tested the memory with Memtest + for more than 3 hours. No errors.

  Moreover, the last time that my phone was in ASP it had returned with DMI saying it's Satellite L20! I dunno if that could be related...

  Thanks in advance for your suggestions,
  mentorek

  You have blown the dust anyway? As you say, maybe another component is overheating rather than the CPU or GPU. The CPU/GPU heatsink can be shared with other chips.

  Have you installed RAM high performance? His best choose RAM that has the same Timings CASE/RAS as the original factory of RAM.

  The name DMI does not cause something like this.

  PS. If you're running Vista, you must pass the BIOS and driver nVidia on the Toshiba site

• Satellite L30-105 will not boot after memory expansion

  Hello

  I have a Toshiba Satellite L30-105, with 1 GB of memory (2 X 512 MB modules).
  I bought 2 X 1 GB-compatible modules to extend the memory to its max.

  When I install the two new modules the laptop won't boot. I tried to install one at the time and both work individually. I also tried 1 X 512 MB
  and 1 X 1 GB, which also worked.

  Help I have updated the bios but still can not computing for work with 2 GB of memory?

  Thank you
  Rebmark

  I am also interested what compatible modules you use.

  Just FYI: your laptop model can handle with 2 GB RAM and compatible module - 1 GB DDR2-400/533 (PA3411U-1M1G).

• cannot start win8 after memory upgrade

  Hi I have a HP Pavilion P6813w

  It came with win 7 64 bit installed with 6 GB of ram
  I created a duel with victory 8 boot
  It was working fine until I got my 16 GB of ram today
  Well I got the 16 GB in and turn on the computer to get to this
  Recovery
  your pc needs to be repaired
  the application or the operating system could not
  be loaded because a required file is missing or
  contains errors.
  file:\Windows\system32\winload.exe
  error code 0 xC0000001
  but when I'm out of 8 GB it starts and displays the 8 gb of ram.
  I tried to do the repair installation dvd options since the win8 and even tried it recover usb option
  When I use the usb option I get error 22 grub 1.5
  so my question is why win8 will not load with additional memory
  and even win 7 does not load
  It gives me the same error
  my computer shows he takes supporting up to 16 GB
  4 GB ram sticks
  IM experience pc users and cela just stem me
  any idea what could be the problem

  Hi Wallace,

  There is a limit of memory for Windows 8. For version 512 GB for 64 - bit and 32-bit maximum 4 GB is allowed.

  For more information, see the links.

  Limits of memory for Windows versions 

  The memory upgrade (RAM): HP Pavilion p6813w Desktop PC support

  If you have any questions on Windows, feel free to let us know. We are happy to be of assistance.

• Satellite A300-1QD - start some time and memory errors won't test

  Hello

  I have some real problems with a brand new satellite A300 1QD.
  After update of Windows Vista Home Premium 64-bit (Service Pack2) Vista unbootable. After the reboot of forst, it showed a message:

  File: \windows\system32\winload.exe
  Status: 0xc0000221
  Info: the file is corupt possibaly. the header checksum does not match the checksum calculated.

  AprΦs the dΘmarrage of the original CD Vista Home Premium or the Systembuilder OEM another error appeared:

  Error: 0xc000000f
  Missing or damaged \Windows\system32\winload.exe

  Does not even work by pressing F8 during startup. I have a chance to start even a repair because there is no option that I could choose.

  After a few resets the A300 seems to have some problems.
  A few times the display does not start, after the other it does not, start by hanging up during the automatic test etc.
  I have reset the BIOS by default Options, but it does not help.

  The A300 are one week. Am I allowed to remove a RAM bar without losing the warranty?
  I have read that sometimes it helps. I was able to do a memtest software vista. It is said that some hardware conflicts appeared.

  I am desprate, please help.

  EDIT:
  I did another test memory with linux 64 bit (openSUSE 11.1) and many erros occurred.
  What can I do now? The laptop is a present fpr my girlfriend Monday 15. Can I order other RAM and return that broke with a Numbor RMA or something?

  EDIT2:
  I recognized, that sometimes, when I start the laptop, the power led is the lightning to the top, but the satellite logo in the left corner remains dark.

  Oh, by the way, excuse my English, I hope that I can make myself clear enough that you can help me ^^

  I guess that you have solved this issue thank you for your comments mate!

• Satellite L100-179: 2-3 weeks after recovering sound interruptions and performance drop down

  I bought a new L100-179 for my daughter for school. It worked fine out of the box, but after 2 weeks, he was so full of adware (from kazaa) that spybot/adaware teacher could not clean everything off. He could not play sound properly windows sounds or music through Media Player, iTunes or other and happened to be dog slow, taking forever to do anything. So I wiped with reinstall drive and everything was good again.

  The only things we loaded were the driver for the card netgear wireless, spybot + teacher adaware and MS Word.
  I also configured Norton Internet Security which is preinstalled.

  Everything was good for another few weeks, but then the same problem is back, same symptoms - heavly sound interruption, including the sounds of windows startup/exit and the laptop had an age to do anything - it seems to take 90% cpu for a long time to perform ordinary tasks such as opening a session same Explorer.

  I ran the anti virus, spybot, adaware pograms, I defragmented the hard drive, I have experienced wth the performance in the Control Panel/System/advanced parameters such as the virtual memory settings, but nothing brought no improvement.

  I sat and looked at the processes that are using most of the cpu and it was no matter what app I chose to run or Norton IS components. Everything seems normal, but takes forever to do the simplest things, and he could not play the sounds/music cleanly again.

  I had no choice but to wipe again using the recovery as well as before minimum programs cd.
  Hey hop - all works fine again, sound is normal and things take a reasonable time to do so - this excludes a hardware problem?
  This time we uninstalled Norton Internet Security in the case who was to blame. (application of cpu very hungry)

  This lasted 3 weeks before is exactly the same thing - she did bother load the mp3 files on this time, does not load any application or update all the drivers it just used to run word, playing music through WMP and MSN Messenger friends.
  Anti-adware programs reported all was clean, I've updated the BIOS, then his driver of Toshiba, defragmented the hard drive barely used and looked like a bunch of other parameters, but once again nothing it improves until wipe us the disc and reload from the recovery disk!

  We now only loaded the map without thread, MSWord, iTunes and MSN messenger and it has been fine all over Christmas, but we know it won't last long until he must recover again.

  I've seen others report the same problem on this forum, but not a solution that works for me.

  We have 5 laptops in the House and it's the only list this problem.

  Any ideas guys?

  Hello

  If the CPU is forced to run at high level did you check which process is responsible for this? For the moment, I sometimes have the same problem with iexplore.exe. From time to time CPU is permanent on 100% usage and just if I kill this process manually the laptop works well again.

  In general, I noticed that Symantec Norton products need a lot of resources of the laptop and the first thing I did on my Toshiba is to remove it. I recommend you do the same thing after the next recovery procedure. How to do this you can see under http://support.toshiba-tro.de/kb0/TSB6B01NM000ER01.htm

  I can't imagine that there may be another problem. By the way L-series is laptop budget and you can't expect a perfect performance, but for every day use, the device is pretty good. Try to set it up without any applications that need a lot of resources and slow CPU activity.

  I'm sure you have many experiences for laptop and you will understand what I mean. ;)

• Satellite does not start without pw after updating secure phoenix BIOS

  Hello

  I am new to this forum and have the problem, which, after an update to the home page of Toshiba with Phoenix secureCore Tiano my satellite L555, wondered about a password at startup from the BIOS, I have not entered, and has never been asked. (X-)

  What can I do to get this machine started? I tried to get with the "F2"; and F12 when starting the machine, but he asks allways my about this password and after 3 'entered wrong' laptop computer closes down and I have to restart. (with the same results)

  Can someone give my an idea, how can I get my laptop to work normally? ?:|

  Thank you
  We

  Hello we

  Unfortunately it is not simply the method how to bypass BIOS password and you now need professional help.
  Please contact the nearest Toshiba service provider and explain the situation. They will help you with that.

  Sorry buddy

• Re: Satellite L650/07C-boot-loop after memory upgrade

  I have a Toshiba Satellite L650 / 07C - PSK1JA-07C017.
  To get a little more life out of it, I've updated yesterday with a SSD and 8 GB memory.

  The SSDS works perfectly and I have installed OS and all the drivers and software.
  However, the memory causes a boot loops. I returned to the standard 2 x 2 GB memory at the moment.

  With the new memory installed, the computer startup-loops. When you try to start Windows, the computer will appear at the stage of loading Windows (the boot animation) and then restarts.
  I tried to start with the recovery discs, and it arrives at the stage of loading of Windows Setup, and then restarts.
  She will continue trying to start, then by restarting (then repeat), until I turn it off.

  The memory I installed is Corsair CMSO8GX3M2A1333C9 (2 x 4 GB):
  http://www.Corsair.com/cmso8gx3m2a1333c9.html

  For me, it looks like the same specifications that the modules of memory Kingston 4 GB listed on the Toshiba site as being compatible with my laptop:
  http://www.MyToshiba.com.au/products/Accessories/memory/KTT-S3B/4G/accessories

  I found the specs of memory recommended here:
  http://www.LASystems.be/PDF/Kingston/246787/KTT-S3B4G.PDF

  If I go into the BIOS, I see that the memory is detected as 8192KB. The Toshiba site says that this laptop is expandable to 8 GB.

  Is there something I'm missing?
  Is there another step I need to perform when upgrading their memory?
  I don't know why it won't boot with the new memory modules in that I put.

  Thanks for any help you can offer.

  I assume you have the Australian model is not easy to find info on the hardware upgrade. What I can say is that model European uses DDR3 1066 MHz memory modules and 4 GB of RAM compatible a part PA3677U-1M4G number.

  It must be exact model described by microcens.
  I recommend you use the tested and compatible memory modules.

• Tecra M9 - does not start after memory upgrade from 1 GB to 3 GB

  I am trying to upgrade my M9 memory with little success. I bought a 2 GB module which is the same existing brand and spec to the 1 GB module, but the PC will not start no matter what options I try. So far I have tried:

  * Addition of 2 GB for the accommodation of extension from below (3 GB total)
  * Withdrawal of module 1 GB under the keyboard and its replacement by the 2 GB module

  None of these options work. The PC gives no beeps or indications that there is a problem, the led lights on the way to the top, the drive led flashes and then it goes into a wait state. Nothing happens.

  For the record, I bought initially upgraded memory that wasn't an exact match and I am now on my 3rd module suspecting a memory compatibility to be the issue. This current 2 GB module seems to fully match the 1 GB as well as being twice the size. It is:

  HYNIX 2GB 2Rx8 PC2 - 5300 s-555-12

  I am running Windows XP SP3

  The TECRA is a PTM91A Intel Duo T700 CPU 1.80 GHz

  Any help would be appreciated

  Hello

  To me it sounds like the new memory module is not functional or not compatible with the laptop. Otherwise the cell would start without any problem.

  If you bought the memory module in a store, you have to take it back and ask for a replacement.

  I n t have experience with Hynix memory modules. For the upgrade of my laptop, I used Kingston memory and it worked without any problem

• Satellite L30-101 will not boot after memory expansion

  Hello

  We have a Toshiba Satellite L30-101 with 512 MB memory

  We also bought 2 X 1 GB-compatible modules to extend the memory to its max.

  When we installed the two new modules the laptop won't boot.

  We tried to install one at the time and both work individually. I also tried 1 X 512 MB
  and 1 X 1 GB, which also worked.

  It seems that we are not the only one with this problem!

  1.5 works much better on le.5 but it doesn't seem to be a shame to have the autres.5 but its unusable!

  regards db

  Post edited by: db133

  I think that you have incompatible modules for mode dual channel.
  What RAM do you have?

  A module is maybe corrupted and so he doesn t run in mode dual channel.

  You can check the module with a program like Memtest86: [www.memtest86.org]

• Satellite C670D-109 - installation of recovery after replacing HARD drive image

  Hello

  I have a problem to restore my laptop.
  My hard drive is not working, I do not have the recovery disks, but I managed to save the HDD Recovery folder in a partition of DATA.

  Once installed the new hard drive, it is possible to recover my original without the cd, but with a pen drive usb installation?

  > Once installed the new hard drive, it is possible to recover my original without the cd, but with a pen drive usb installation?
  Unfortunately, you will not be able to start the recovery image installation. The data saved on unusable USB on this path. It must be the startup created by Toshiba recovery disc creator device
  You can only install recovery image using the recovery disk.

  If you n t have it you can order a new one.

• Satellite L850-161 starts * recovery * mode after I turn it off sleep

  I bought this laptop there are a little more than two months, and the first time that something unusual has happened was when I put the laptop to sleep and when I flipped open the screen stayed black and would not turn on, but I could hear the sounds of startup.

  I had to close, by pressing the power button.
  The second time it happened, when I turned on it again, he has said "Windows loading files...". "and then comes up with a new screen with a big red"Warning"splashed on it.

  He said "when the recovery started, all programs and files will be deleted.
  Are you sure that you have backed up your files?
  Please connect your power adapter and press Yes or no."

  I restarted the computer at this time, and then everything was back to normal.
  I checked the laptop for any viruses, but the anti-virus software says that my laptop is clean.
  Is this a problem with the hardware or something?
  Given that it is almost brand new and I take good care of it?

  Sorry for the hike, I'm very stupid technologically
  Thanks for all the help!

  Hello

  I put t know why the first message appeared, but generally, this message is displayed when the disk or recovery disk recovery should be started.

  You have a recovery disk in the CD/DVD drive?
  Check it otherwise I have no explanation for this

  Maybe you should back up the data and need to retrieve the new laptop
  Worth to try