Can I make comments using the wired network...

Similar Questions

• Can workstation make me use the ethernet port on the remote computer?

  Ideal solution would be:

  I have specialized software on my computer I want to use without installing it on the remote computer.

  For now, I have to because the software uses the ethernet computer port to do a job, the software is used to.
  

  
  

  (1) is there a solution out there for everything just to connect to a remote computer and make use of its ethernet port remotely?
  

  
  

  Someone told me that VMWare Workstation last night. Maybe it's completely off-base.

  
  

  If this remote computer is connected to another computer via an Ethernet cable, but not for the internet, only data.

  For me to be able to connect to it, the remote computer must maintain a simultaneous Wifi connection as well.
  

  I use Teamviewer to fight against it.

  
  

  (2) if 1) above is not possible, I'm back to my current setup which is to the software me, I need on that remote computer. But my problem is that it does not seem possible to have WiFi and Ethernet connections at the same time.

  Please correct me / explain how if I'm wrong.

  How can be useful to me in these scenarios Workstation?

  Thanks in advance for your help. I'm looking everywhere for more than a week.

  I read that you wrote in your OP several times and no offense not expected however it is not well presented and I find I have to ask the many requests for clarification, however, I will say this...  A Virtual Machine is presented only a wired Ethernet adapter no matter how the host connects to the LAN/WAN and if you need to wired Ethernet and WiFi Ethernet in the Virtual Machine, and then in addition to the default wired Ethernet you can also provide your own card Ethernet Wi - Fi USB to connect to the virtual machine as well as the two available to the virtual machine at the same time.

  Others while I won't waste time asking a bunch of questions and if you want to take an another stab as describing in explicit and specific in detail what you have and are trying to accomplish, then I add more to the discussion.

• How can I make Firefox use another version of the installed Java runtime?

  For purposes of development, I have several versions of the Java runtime on my 64 bit Windows 7 computer. I try to keep the number of JDK and JRE installation to a minimum and I want Firefox to use JRE 1.7.0_21 (32 bit) because this happened with a version of JDK, I am forced to use another application.

  Firefox however use JRE 1.6.0_31 and is correctly reported as non-secure. It offers me the upgrade option, but I don't want to download and install a different JRE since I already said 1.7.0_21 installed JRE. I would prefer very just to be able to point Firefox so that JRE. I don't see an option to select a different JRE installed however.

  I tried to manually edit the file pluginreg.dat (I know, it says do not edit...) by changing the entries of JRE 1.6 and 1.7 of the JRE, but on reboot, my changes have been overwritten and was back at the old JRE. So I can't view some web sites (also company/internal) without having to change to any browsers.

  Please let me know how I can make Firefox use the already installed JRE 1.7.

  Firefox scans the registry to find the location of the plugins.
  If Firefox detects a plugin and not the other, then that means that the other Java plugin is not having a corresponding registry key.

  • http://KB.mozillazine.org/Java
  • https://developer.Mozilla.org/Adding_Extensions_using_the_Windows_Registry
  • https://developer.Mozilla.org/Gecko_Plugin_API_Reference/plug-in_Basics#How_Gecko_Finds_Plug-ins

  64-bit Windows:
  HKLM\Software\Wow6432Node\MozillaPlugins\@Java.com/JavaPlugin,version=XX.XX.XX
  32-bit Windows:
  HKLM\Software\MozillaPlugins\@Java.com/JavaPlugin,version=XX.XX.XX

• How can I make Pages capitalize the first word in a sentence?

  How can I make Pages capitalize the first word in a sentence? The I phone t - it, the iPad does, why not not iMac using Pages capitalize the first word on a new sentence?

  Pages of IOS and IOS itself remain different implementations of Pages v5.6.1 for Mac and OS X. In any version of Pages v5, if there was an option to preferences in Pages ' 09, there is no auto-capitalisation function.

  See my previous post is launching an OS X App Store free application, which can be applied to auto-capitalisation to your Pages v5 documents.

• I can't print due to the "wireless network connection" doesn't have a valid IP address.

  Cannot print wireless

  I can't print due to the "wireless network connection" doesn't have a valid IP address.  How can I fix this problem myself (an absolute non-techie)?

  Hello

  -Did you change your computer, after which the question began?
  -Check if you are connected to the network?

  The question seems more like a network connection problem. I would like you to do the following.

  Method 1: run the Network Troubleshooter utility and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   
  Method 2: release and renew the IP (Internet Protocol) address and see if the problem persists.

  has. click Start. Type cmd in the search box and press ENTER.
  b. at the command prompt, type the following command and press ENTER:
  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.
   
  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer is not getting an IP address from the router.
  If this is the case, try this:
  ·        enough ipconfig at the command prompt and press ENTER
  ·        ipconfig / renew in the command prompt and press ENTER

  Method 3:

  Network printer problems

  Note: The steps also apply to Windows 7.

• I just got a new supplier of cable installed at home and now we find that our usual printer print wireless. How can I add this to the new network?

  I just had a new supplier of cable installed at home and now we recognize that our habit of printing wireless printer, how can I add this to the new network?

  Hello

  • What is the brand and model of the printer?
  • What happens when you try to print?
  • You receive an error message?

  You can view these methods:

  Method 1:

  Disable the firewall and check.

  The Windows Firewall is enabled by default in this version of Windows. To make sure that it has not been disabled, follow these steps:

  1. open the Windows Firewall by clicking the Start button, then Control Panel. In the search box, type firewall and then click onWindows Firewall.

  2. in the left pane, click turn Windows Firewall on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. below for each type of network location, click on disable Windows Firewall, and then clickOK. We recommend that you turn on the firewall for all network location types.

  For more information, visit the following link:

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  See also:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

• How can I reset passwords using the hidden administrator account?

  Original title: hidden admin account

  How can you reset pass using the hidden account dmin. ? That can make the admin account hidden?

  I have windows vista and I am the only administrator and user of my laptop.

  Hello

  You cannot use the hidden administrator account to reset the password. If you forget your only means of password to reset using the password reset disk. See the article below for further assistance.
  What to do if you forget your Windows password
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  Activate hidden administrator account gives you access to the files or the privileges if you are denied access in some cases.

  Hope this information helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Automatically use the wired on wireless LAN connection when using the docking station

  Hey guys!

  I use the my T500 with the Advanced Mini Dock @TheDude recommended in this thread: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T500-Recommended-Compatible-Docking-Station...

  I had almost a month now, and whenever I anchor my laptop I have to pass the connection wireless switch off hard or using FN + F5 and extinguish this particular radio.

  Is it possible to have the computer automatically choose the wired connection when it is available, otherwise use the wireless radio?

  I use Windows 7 Prof 64 bit.

  Thank you

  c1p0

  ThinkVantage Access Connections (AC) can be configured to do this. Change your location profile and change the order of the adapter associated with this place, for example, order first as Wired and Wireless second.

  When I am connected Wired and I pull the Ethernet cable, AC will switch to using wireless automatically. When I put the Ethernet back in, it starts automatically by using the wired and wireless don't report limited or no connectivity (which means that the switch has occurred). You will have to perhaps set up wireless in AC power options, i.e. disable radio when not in use (I did not sentence again).

  This could be similar to a docking station solution. Mine is without docking station; When I'm at the office and go to a meeting, I pull the wire and have continuity.

  Ideally, the CA should provide a solution. But it may take some fiddling.

• I can't ping or join the local network internal

  I can't reach or ping my network when I connect via VPN. The connection works fine, everything must be connected to the ASA and users is accepted through RADIUS

  Jørgen,

  I recommend you to use different network RA pool to be separated from your inside of the network number, this strategy troubleshooting efforts ease down the road that say to questions of troutbleshooting of the Interior can still function 192.168.0.0/24 and RA POOL 192.168.0.0/24, however, using the same network.

  I corrected a few things in your config file.

  You have allocated dhcpd for inside the host from 192.168.0.2 - 192.168.0.129

  and your pool of vpn RA is set from 192.168.0.60 - 192.168.0.75, your RA pool allocation must be 192.168.0.130 - 192.168.0.145 to have a few consistentcy.

  You must also add to your config "crypto isakmp nat-traversal" and customer RA try again

  If all above is not the thing, keep in your config nat-traversal crypto isakmp and re - create new network for your POOL of RA.

  Here's the easy script

  remove network RA POOL

  no local pool VPN_IMH 192.168.0.60 - 255.255.255.0 ip 192.168.0.75 mask

  create a new network POOL guess (172.16.1.0)

  local pool VPN_IMH 172.16.1.60 - 172.16.1.75 255.255.255.0 IP mask

  for your exempt nat acl add the following statement

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 172.16.1.0 255.255.255.0

  remove this rule

  no access list inside_nat0_outbound extended permits all ip 192.168.0.0 255.255.255.0

  Let us know how works to help

  Concerning

• Watch is not in the wired network device manager or manage networks

  You have a slgiht problem, I have a HP DV6, do not ask me which model and I noticed when I tried to connect a PS3 to the laptop to share the internet the wired network adapter was not appear anywhere. I checked in internet Manager network cards, network devices, and it's not listed, I then checked the program uninstaller and found that the driver was listed for ethernet so decided to uninstall and reinstall but nothing. I then went back and plugged in an ethernet cable from the router to the laptop and it appeared, why is this and y at - it a way to get the wired connection to show at all hours because it means that I can share my internet connection for laptops with another device.

  Hello:

  It's probably a setting in your BIOS to disable the power saving Mode LAN (which by default is set to enabled). Normally found in the system configuration menu.

  When your laptop is on battery and you plug in a network cable, it may not work if the LAN Power Save mode is set to enabled.

  Disabling the setting allows the map LAN is present and ready at any time. Press the F10 key there and at the exit of the BIOS to save settings and exit.

  Paul

• I paid to Plan creative cloud (UN Año) fotográfico (n. º of pedido 11854470059). It s already charged on my credit card, but the products are not available on my account. What can I do to use the software?

  I paid to Plan creative cloud (UN Año) fotográfico (n. º of pedido 11854470059). It s already charged on my credit card, but the products are not available on my account. What can I do to use the software?

  Your subscription to cloud shows correctly on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Force the VM to use the wired ethernet port instead of wireless

  Hello

  I use ver 9 workstation.  I have my host computer (win 7 64 bit) connected to our network of offices using the connection with wireless computers.

  I use a windows xp based virtual machine image that connects to devices of 3rd party via the ethernet port wired in Bridge mode.

  Is there a way to force the workstation on the use of only the cable connection and don't EVER try to connect via the wireless?

  At the moment I have to disable the wireless for the workstation to access cable port, if the without wire is activated, so you may not see anything on the wired port...

  It also causes headaches with ip address conflicts (3rd devices use the same IP range as our network of offices) if I don't have the VM running and wireless power.

  Any help or advice would be appreciated

  Tim

  Use the virtual network Editor to bind to the target adapter for VMnet0 and set the NIC of the virtual machine to use connected by a bridge.

• iOS 10.0.1 "not allowed to use the restricted network port.

  I just upgraded my iPad Mini iOS 10.0.1. He is now running Safari 10. I tried to visit an internal/private IP on port 4190 using HTTP. I get an error that says:

  Safari cannot open the page.

  The error was: "not allowed to use the restricted network port.

  On iOS 9.3 using Safari 9, the same URL opens fine without this error.

  Do not know what has changed since iOS to iOS 10.0.1, 9.3 but I'm unable to visit a web site that I have visited before.

  I know that WebKit maintains a list of ports that you cannot go (e.g. 6666), 4190 is not a restricted port AFAIK. I don't know why I get this error message.

  It seems I was looking at the wrong source code.

  I finally got a clue where to look after visiting the page Web Safari Technology Preview 13.

  https://trac.WebKit.org/browser/releases/Apple/Safari%20Technology%20Preview%201 3/WebCore/platform/URL.cpp

  It seems port got 4190 recently added to the list of blockedPortList

  2306	2049, / / NFS
  220V	3659, / / apple-sasl / PasswordServer [addition of Apple]
  2308	4045, / / lockd
  2309	4190, / / ManageSieve [Apple adding]
  2310	6000, / / X 11
  2311	6665, / / alternate IRC [addition of Apple]
  2312	6666, / / alternate IRC [addition of Apple]
  2313	6667, / / standard IRC [addition of Apple]
  2314	6668, / / alternate IRC [addition of Apple]
  2315	6669, / / alternate IRC [addition of Apple]
  2316	invalidPortNumber, / / used to block all the invalid port numbers
  2317	};
  2318	const unsigned short * const blockedPortListEnd = blockedPortList + * _ARRAY_LENGTH (blockedPortList);

• I can't make changes to the settings of Firefox - none of this works

  As usual, when I allow an update firefox Win Desktop, more things gets sacked. God I wish there was an alternative to that shit from ff!

  I can't make changes to the settings of Firefox - none of this works

  It was theme Aeon 7.5 - this is obviously totally redesigned the appearance of the settings options and caused my mouse does not work.

  Thanks for your help - and I'm sorry for the insults.

• "Most Visited" is missing on personal bar and I can do this by using the suggested corrections, even in safe mode. What should I do?

  "Most Visited" is missing on personal bar and I can do this by using the suggested corrections, even in safe mode. What should I do?

  You didn't say what you tried. This link shows how to restore - https://support.mozilla.com/kb/Restore+the+default+Smart+Bookmarks+Folders