Can I optimized the HD with the help of a time machine restore?

Similar Questions

• How Downgrade of El Capitan in Yosemite without data loss and without the help of a Time Machine?

  I, are looking for an answer to this question, but couldn't find one.  If there is an and missed it, please tell me and I will look happily on it.  I want to do it without the help of a Time Machine, because I used it at the time of Yosemite.  And I discovered that you can use a cable USB or SD to come down, but how do you do this without losing all my data?

  You must save, erase the drive, install Yosemite, restore your backup of the data

• Satellite A660-k17: can I remove the two primary partitions used for restoration?

  Hello
  I have 3 questions :) #.

  1. I burned a copy dvd recovery media, on a laptop A660 k17. There are two partitions on the disk that I think are there for the recovery. The first is 1.46 GB and it's for the recovery and another partition hidden 8.29 GB... and I think that the first contains the Recovery Wizard and the whole environment in which we will get through the repair of the system and the hidden disk contains the actuall with windows data, drivers and so on. Can I remove these two? I ask mainly on the first, if it is not necessary for the system to boot or something after that I have to recover the laptop to the factory setting.

  2 and I also want to leave my partitions so that I don't have to partition the whole drive from C 600 GB again. I have a D drive created but there is this response to a topic already in the forum http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=64754&tstart=90
  who says that when I leave the partitions I created myself, that the recovery will be not available. I have a copy on dvd, but only to make sure no kidding something upward.

  3. when I want a clean system without some software which are preloaded on the oem recovery disk... I have to use windows recovery? or it will be the same as the toshiba one?
  Thanks for the reply possible :)
  Beautiful day :)

  > Can I remove the two primary partitions used for restoration?
  First not, but you can remove the Toshiba recovery partition if you created the recovery DVDs. One day, if you want to install the recovery image once again you can use created the recovery disc.

• Can upgrade you the graphics card in this Machine?

  I just ordered that model number HP Pavilion is m7-1015dx I really really look forward to receiving this laptop having specifications really very good for the price. The only thing that was really bugging me bad, it's that "can upgrade you the graphics card in this machine? Since I am on the Hardcore Gaming and school.

  -Thanks in advance.

  He may have a problem, as indicated in the specifications is has the Intel UMA video that would be the worst choice of graphics of today, you can get to the game.

  When you use a laptop for games, you always want to get a discrete graphics solution that uses its own memory first before using system memory.

  You just have to try and see what happens.

• How can I disable the onion? every time I start Internet onion appears, what should I do to turn it off?

  How can I disable the onion? every time I start Internet onion appears, what should I do to turn it off?

  ·       Click Start on your desktop
  ·       Type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  Go to the Startup tab, locate Internet onion and uncheck the box to open at startup.

  I could also go into Panel, programs and features and see if you can uninstall Internet onion.

  Thank you

• Restore the iPad App via Time Machine?

  Let's see if I can explain it clearly without writing a novel...

  We used iBank on a series of iPads in Quicken replacement.  iBank was wonderful.

  A few days ago, we decided to accept the upgrade to the new version of the App.  The upgrade has changed the name of the application of Banktivity 5.0.3.

  After the update the app is more responsible, is back with ' an error occurred during the migration of permanent storage' and when we hit OK you get the spinning wheel of death, eternally.  Fearing yet another Apple HW question I made the mistake to immediately an iPad manual backup because I did not know when the last of them automatic was and I didn't lose anything else on the iPad.

  The iPad is running 9.3.1 model number MD516LL/a H/W.

  We have iTunes to save 'automatically' iPad 'to this computer.  We do not use the cloud.

  I had an exchange of mail with the support of the IGG, but when we walked in the restoration of a previous automatic backup on the iPad, they were out of their depth.  I have no complaint with their support, they do not know where are stored the backups or how to proceed.

  So, that's where it gets interesting/frustrating.

  I try to use Time Machine to restore the App from a previous version in iTunes and then sync to iPad.

  I do not see the backup files to iPad specific laptop I use for backup "automatic" iTunes "to this computer.  I see the list of applications on the iPad iTunes in the ' users > Shared > iTunes > directory of Mobile Applications.  I'm going back in time in Time Machine to find the last backup the previous version of iBank has or Banktivity iTunes before 5.0.3... in the hopes of restoring just that specific app and data...

  ... Previous Time Machine backups have iBank or Banktivity listed in the applications!  I have looked far and sought to my heart's content, but none are here.  All other applications will appear in the list, but not iBank or Banktivity.  Now, I'm stumped... Why would not appear anywhere in the last backups?

  Having lost all historical and current in the iBank data are a pretty big disaster if I don't want to take the risk of ruining more by doing a partial or full restore iPad without understanding why the previous of iBank versions and/or Banktivity do not appear in the lists before the last manual of Time Machine backup?

  The iPad is an ideas, thoughts or suggestions would be most appreciated.

  Real applications are not stored in the backup (which contains the content of applications, your settings, documents, photos etc), restoration (backups are stored in ~/Library/Application Support/MobileSync/Backup/on a Mac, a backup is not designed to be readable by the user) would look to pick up the application of the section My Apps from your iTunes library - so looking for a old backup iPad in Time Machine won't help your find the app.

  As to why the app does not appear in your Time Machine backup of your folder "Mobile Applications", looking for the correct name of the application (the name that shows in your iTunes Apps my chapter cannot be the same as the file real .ipa computer/time Machine; some of my friends have very different names)?

• Close the network on my time machine

  I recently started to use AT & T Uverse to my wireless network, but my old my mac time machine network is still high and confusing devices in my house. I always use time machine for backup, but no ethernet cable is currently not attached (new modem ATT in a different room from the computer). How to stop the old network on my time Machine? I use Mac OS 10.10.5 and utility Airport 6.3.5.

  Duncanj1224

  It's a simple matter to turn off wireless on the Time Capsule.

  The problem with that is that backups Time Machine will not officially supported... and may not work at all.

  You want to try this anyway?   We will not be able to help you if you could create problems.

• How to clean the files of time machine restore after reinstall

  Just did a wipe and reinstall on an iMac 2011 (10.8.5) mountain running Lion.

  I don't want to do a full restore from Time Machine; I just want to take a few important files (cache profiles, e-mail, etc.). [Did the reinstall because my system was flawed and nothing else I did fix it.] [The story is here:beachball recurring in all applications in Lion, finally freezes iMac]

  When I open Time Machine on my 'new' machine and turn it on, he says he has no previous backups, but begins to make its first backup in 120 seconds. There is no option to "enter" Time Machine and recover individual files.

  I then turn off Time Machine because I'm afraid that it will make a new backup and erase / unrecoverable my previous backups.

  The drive Time Machine target exists in disk utility. A 600 + files (backups, no doubt!) and verified without errors.

  Before the clean and reinstall Time Machine worked perfectly. I have test-recovered some files and everything was good.

  How do I introduce my iMac 'new' to my old backups Time Machine?

  Thank you

  Use tmutil inheritbackup such as described by the end Pondini in his FAQ, here: http://pondini.org/TM/B6.html. Follow the instructions in the blue box, entitled "inherit a backup. The is short and simple but please follow carefully.

  I believe that you won't always be able to restore individual files until that Time Machine backs up new, then let him. Once this is done, you will have access to your old backups.

  Alternate procedure: since you can not keep this old backup after the restoration of the individual in any case files, you can hold a key option key while clicking the Time Machine in your Mac's menu bar. A option «Browse other backup disks...» ' will be displayed. What to choose.

• Backup and restore with MacPro and Pegasus using Time Machine

  Hello

  I have more than one mac mini, and Mac Pro.  I have external Pegasus 12 TB and two external hard drives of 4 TB.

  Im trying to back up all servers in those storage unit.

  I can see them in every window of servers as being selectable but I get an error of error OSSTATUS 2

  It was suggested to connect all readers behind the time machine backup, but it has not been that reliable.

  Do you have a suggestion of how to back up each server Pegasus 12 TB and 4 TB two external disks?

  I can't wait to hear your thoughts

  Joe

  From a given computer, you can back up all drives connected locally to this Time Machine backup drive.

  The backup drive Time Machine for a particular computer can be a locally attached disk, a drive attached to a "Tall" Time Capsule or a network drive 'shared' by another Mac on your network. The Time Machine backup disk cannot be a NAS drive, because the restoration of these discs is not completely reliable.

  The space required for the proper functioning of Time Machine is at least two times greater than the amount to save, and 2.5 to 3 times more is recommended.

• Where can I find the Helper of Plot Bar 3D LabVIEW in 2014?

  Hi all!

  Sorry if this question is trivial. I know this is supposed to be pretty simple. However I fail to solve the problem.

  I need to generate a 3D bar plot.  For this, I found the attached example VI: 3D bar with custom labels chart 2013.vi.  I tested this 2013 LabVIEW VI and worked perfectly.  However, I have to work with LabVIEW 2014 (German edition, SP1, f3). When I opened this VI with the 2014 version, I get a broken VI.

  I realize I don't think 3D Helper.vi of Plot Bar where I used to find it in the version of 2013 in my 2014 LabVIEW (see image of attachen). In addition the broken VI seems not to recognize the custom 3-d bar graph indicator.

  I appreciate any help you can provide to me!

  Sincerely,

  Diego

  Hello everyone!

  I just found the cause of this behavior. The Helper of Plot 3D Bar is not available in the basic development system.  It was possible to see in the 2013, because it was a trial version where the VI is available!

  Thanks anyway!

  Diego

• How can I draw the intensity in real time of a picture in time real (imaq 1394)?

  I have a firewire camera.

  I hooked up my camera to my pc with labview and now I display image in real time. How can I draw the intensity of a region dependent on time?
  Y - intensity
  X - time... I would watch the variaions real-time intensity...

  Thanks in advance

  The light meter example is pretty much what you want to do. It is located here:

  \National Instruments\\examples\Vision\2. Functions\Light Meter\Light meter Example.llb\Light meter Example.vi

  In the example, the x axis are the number of iteration, but it is easy to modify to use a graphic instead of a graph and chart the time instead.

  Hope that helps.

  Christophe

• To the help of two time Capsules, but a as a external hard drive only

  I just bought the new Time Capsule 2 TB "ac" and created a new network home wireless with it (TC is connected by Ethernet to the Modem/Router). I also use this TC to my Time Machine backup. Now, I would like to use my old Time Capsule ' don't (dish, 2012) as an external hard drive in my network in order to make manual backups of various data by drag-and - drop. I donnot want to expand my network wirelessly with the old TC. How can I include in my network just like an external hard drive?

  Very simple... Connect TC Old WAN LAN new TC... the old Installer TC mode bridge... and wireless off.

  He then worked as an external drive in the network.

• Can not get the title and date/time to appear on the photo to develop, or a library

  I must have done it when I was trying to do some other keyboard shortcut and got hurt - and now I can not understand how to get rid of. But a few weeks ago I did something and now the file name, date/time and size image appear in white text on the top left of any photo I have in develop it or library screens:

  

  So you can see "_MG_0955.CR2" and other details in the clouds. Does anyone know how to get rid of it? I can't find anything in one of the menus. I'm on Lightroom 4.3 for Mac OSX Mountain Lion.

  Thank you!

  Ltter that I you keyboard through the Loupe View Info (even in the develop Module).

  You set what you want to see by pressing cmd + J - and select the parameters for Info 1 and Info2.

  Letter I cycles this way: 1 - Info 2 - no overlay Info.

• Time Machine - an exclusion different backup for the backup drives different time machine

  I hope someone can help me.

  For these past years, I used 2 Time Machine backups to keep all safe. I have 1 backup x who lives at home and is 3 times the size of my disk. I also have a second drive of laptop that I travel with, which is partitioned to give a little time machine backup, more than 1.5 TB of "overflow storage (for movies, video files, etc).

  Recently however, I realized that my "storage of listening" actually contains a large amount of data I wouldn't lose (especially the photos of my children because they were born), so now I want to save this drive as well.

  If my ideal situation is to have a huge drive I leave at home. This contains backups of the computer AND 'excess of storage' backup. It's pretty simple to implement.

  But can someone tell me if my trip backup, will try also to the other partition of the backup drive? And if so, is there anyway to give different time machine backups different exclusions.

  Hope that makes sense and hope that someone can help me.

  Thank you
  John

  You will need to manually change the exclusions when you going on a trip. There isn't a way to change automatically.

• To access the template Pages on Time Machine

  Hello

  I'm tying to access my template Pages stored on my time from a laptop Machine. I have access to the time machine but can't seem to find the record that I'm looking.

  On the laptop that I use, I use the "Go to the Finder folder" option and enter "~/Library/Containers/com.apple.iWork.Pages/Data/Library/Application Support/User Templates. It takes me to the page templates on the laptop that I use.

  I am wanting to use this same command inside the time Machine to Access Pages templates that are placed in memory.

  I tried 'Shift - command - G' and entering "~/Library/Containers/com.apple.iWork.Pages/Data/Library/Application Support/User Templates", but it just brings back me to the Pages of laptop models, not the machines of the era.

  Your help is appreciated,

  Stophen.

  Use the step to go on record to land inside your local user Pages v5 models folder as you have indicated.

  Then click the Time Machine icon in your Dock. This will open the same folder of your last Time Machine backup location. You can then select a current model to restore or go back in the history of Time Machine and select a model in a previous backup, Time Machine. When you find the model you're looking for, click on restore.