Can I REMAP several USERS and spaces of STORAGE both in surgery impdp?

Similar Questions

• Friends in the Forum, this issue was developed by several users and still no correct answer that actually works. How can I make my pdf files show an oreview rather generic logo Adobe?

  Friends in the Forum, this issue was developed by several users and still no correct answer that actually works. How can I make my pdf files show an oreview rather generic logo Adobe?

  Thanks in advance

  Not possible with Acrobat Reader DC.

• How can I store several sentences and insert without typing?

  How can I store several sentences and insert without typing?

  http://www.colorpilot.com/TypePilot.html

• Suddenly can't access local users and groups permissions list

  In computer management (my computer / manage) "Local users and groups" icon has a red x on it and when I click on it I get this message:

  Local users and groups
  Unable to access the computer {computer name} toa. The error was: library not registered.

  How can I find which library is not registered, so I can register?

  BTW, this is one of several very similar problems that began to arrive after the last update of Microsoft Windows Vista.

  Hello GCCarvill,

  Thanks for posting your question in the Microsoft answers Forum.

  If you have a system restore point, before applying the updates would be the fastest way to restore the library file
  who is missing. Use the following article to restore to an earlier point in time. Don't forget to create a manual restore point before using an earlier version of the operating system.

  936212 KB - how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  You can also create a manual system restore point so that you can restore in case of problems.
  How to create a system restore point manually:
  Right-click on the computer icon in the desktop, then choose Properties
  In the left pane, click System Protection
  Alternatively, to directly access the System Protection tab, click Start and type SystemPropertiesProtection.exe.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  Click the System Protection tab and then click on create.
  In the System Protection dialog box, type a description, and then click on create.

  After the search for the other forums, I found another user having a similar problem. They used a tool called FileMon and after comparison, they discovered a file called activeds.tlb was missing. They have restored a copy in the system32 directory and
  was then able to access the local users and groups successfully. You can download a copy of FileMon of:
  http://www.sysinternals.com

  If please reply back and let us know if it helped to solve your problem or if you need further assistance.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Premiere Pro CC - waveform I can synchronize with * several * camera and audio clips a Pluraleyes the?

  Many of us use Pluraleyes to synchronize the DSLR and 2nd audio WAV files using waveforms. (No timecode.)

  The ability to synchronize in first Pro CC has been mentioned in several lists of feature, but I don't see the ability to synchronize a clip at a time.

  Y at - it no way to align several MOV and WAV files with different start / stop times and no other another match that of waveform and synchronize them automatically in first Pro CC in a sequence (or by creating multiple merged clips)? In other words, can I reproduce the Pluraleyes features in this new version of Premiere Pro?

  Currently, the best way to do it is by selecting all items in the project Panel, right-click on it and select Create multi camera source sequence.   Synchronization via audio, choose your audio settings (if you want audio in both clips, select all cameras), and then click ok.  Blocking is smart enough to make this batch and make several sequences of MC with only the clips that match each other.  Unfortunately merged clips, or timeline sync will do only one at a time.  If you want this behaviour in amalgamated sync of clip or timeline, please file a feature request: https://www.adobe.com/go/wish

• Can I bring PORTAL30 user and the related PORTAL tablespace after R12.1.1?

  Hello
  
  After the 11.5.9 to R12.1.1 upgrade, I bring PORTAL30 user and the related PORTAL tablespace? We do not have the old Portal stuff and won't use portal in the new system. In my view, there are objects 1145 (656 Index, 431 tables, lob 28 index, two tables nested in the tablespace and lob 28 segment), but almost no data.
  
  Thank you
  Sinan

  After the 11.5.9 to R12.1.1 upgrade, I bring PORTAL30 user and the related PORTAL tablespace? We do not have the old Portal stuff and won't use portal in the new system. In my view, there are objects 1145 (656 Index, 431 tables, lob 28 index, two tables nested in the tablespace and lob 28 segment), but almost no data.

  Please see these documents.

  What is the Impact of a seeded Oracle users disabling? [418767.1 ID]
  Configuration Guide for Oracle E-Business Suite Release 12 [403537.1 ID]
  How to remove Oracle Portal 3.0.9 to E-Business Suite 11i [ID 312349.1]

  Thank you
  Hussein

• How can I make the biscuit and then break for both sides and have a few small pieces?

  Hello

  Please tell me...

  How can I make the biscuit in AE and then break for both sides and has a few small chips fall?

  any help would be so appreciated...

  Strictly within EI, you have two options. Breaking with custom maps shatter and masking + particle effects. Wouldn't conviceing as Dave.

  If you have access to a 3D application (blender is free) you can do it here.

  This is a project of 2 minutes in AE with a stock image:

  

  with one broken high buscuit animated to adjust to the split, it might be unconvincing.

  Here's the project CS6 ASP file for you to play with. Take a look at all the elements to see how it worked by selecting all layers, then pressing the key u twice to see what I changed.

• Where can I find toolbar separators and spaces containing the separated my icons?

  I've updated to Firefox 36.0 and I refreshed it was slow in its operation. My toolbars customization, I noticed that the separators and adjustable spaces previously, I had to keep my separated toolbar icons were is no longer included in the charge.
  My question is where can I find them?

  Currently, only available for bookmarks toolbar folder. The separators have been removed in the new user interface that came with Firefox 29, back in April 2014.

  It - https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ - is the only extension I know which supplies separators to other toolbars.

• When I turn on my computer, already set up profiles disappear and are replaced by 'Kiosk' and 'other users' options that require passwords. I can get into 'other users' and find my previous user accounts, but lose them again after the reboot.

  I bought a laptop with Windows 7 installed a few days ago. I started to set up user accounts, administrator and a guest. So far, I had been able to shut down and restart with the accounts of users even reappear. I turned on my computer and two 'user accounts' had replaced my previous. Named "kiosk", which requires a user name and password which I do not have access, and one named 'other users' that requires a user name and password. I type in comments and no password and then I can access the guest account. When I disconnect my administrator profile is available next to my usual guest account. Restart the "kiosk" and "other accounts" reappear. If it's any help, as soon as I put on my computer, I had named MDX kiosk and administrator accounts. I deleted the account kiosk MDX. I don't know if this is related at all. It is not necessarily a problem, but a disadvantage however and I panicked when this popped up on my computer.

  Yes, you can uninstall MDX (it is called the digital experience of Microsoft) and it will remove the kiosk account and no trace of it, and then restart your machine. All other accounts on the machine should stay, but I would like to make a backup first. This should solve your problem. Associated with the store, you bought from should have done that for you, why they failed, I have no idea (we are instructed to do before the release of the machine to customers). If you don't mind asking me, where did you buy the machine?

• How can I add 1 user and 1 app to my plan of Adobe?

  I got an Adobe account for awhile. I now want to expand to share my plan with an additional user. In addition, I would like to add Photoshop to my plan.

  Hello

  You can download your product Adobe subscribed on two computers and use one at a time.

  and

  So if you want to add photoshop please follow the link below:

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

  Please make sure that you are connected with your account on which you want to purchase.

  Kind regards

  Chirag

• Hello, how can I import several PSD and their ayers in a PSD file?

  Hello, I am building a drawing and I bought several PSD that will improve the design until the layers. How can I import all my PSD in my original PSD file? I tried to add them through the script option, but the imported PSD layers are flattened into a single photo.

  Try to open all the PSD files. Then select all the layers in a PSD documents you want in another and use the move tool to drag the layers selected in the layers palette and drop them on the window of PSD document images that you want a copy of the layer.

• Why can't copy several layers and groups in a new PSD file?

  I created a bunch of new files PSD w / they must be the pixel dimensions. But I can't copy over 1 layer in these new files in a source file (w / all of my work). Why is this? Does anyone know?

  Go to Image > Mode for each file type and check that they are both RGB, or the two etc. CMYK. An adjustment layer, such as a curve or a Hue/Saturation, which is setting red, green, and blue pixel in an RGB document, cannot be moved in a CMYK document (or grayscale, etc.) because the color channels, that layer is adjusted are not there. This means that your new PSD files should be replaced by the same color mode as the documents you want to duplicate adjustment layers of.

  Steve

• To understand how users and groups in vCAC 6.0

  I would like to help you understand how to add users and groups.  How can I add normal users and user groups to vCac to consume the items in the catalog?  I don't want to do these users administrators, I want simply to connect and to be consumers of the resources that we have Setup using the plans.

  I see two places to add users:

  (1) after registration as an administrator of the tenant, under the "Administration > groups | The users tabs", but it won't let me add administrative roles to these users or groups.

  (2) by the business group section "users >" however I can't seem to add any AD groups, only users one at a time.

  Where am I supposed to add these user groups and permissions that they need to have to run virtual machines?

  Our scenario is very basic.  We do not currently want applications to go to an approver until the virtual machine is running, we would like 'requests VM' automatically be approved and immediately spun. VCac using 6.0.

  Thank you

  You don't need to add users to your tenant, if they are in the identity store (AD, LDAP, etc.).  You simply allow their service, the elements catalog and actions with rights... However, they must be a member of a BG for payments.

  There is currently a bug where groups of users do not appear when you type the names of groups in the research - but you can still enter the name of the user group, and this group will become a member of the Group of companies.

• Creating users and groups

  Hi all
  I have about 100 users and groups.
  How can I quickly create users and groups?
  
  Appreciate any help

  Check the files which where created during the export of LCM, change them according to your needs, with new users and new groups and import it.

  See you soon... !!
  Rahul S.

• Enter several values in the text box, separated by commas and spaces

  Hello
  
  I have the following syntax as my request to report to the opening of user_names in the area of text separated by commas, but the user sometimes come with a space between commas, could someone please let me know
  How this can be controlled, both when the user uses the space or not use space as well as the comma recording several user names in the text box?
  

  select 
  *
  from   DW_RFA_JOBDATA
  where  FINISH_TIME >= :P1_START_DATE 
  and FINISH_TIME < :P1_END_DATE
       AND  instr(',' || :P1_USER || ',', ',' || USER_NAME || ',') > 0
   OR (USER_NAME = USER_NAME AND :P1_USER is null)

  Thank you

  Select
  *
  of DW_RFA_JOBDATA
  where FINISH_TIME > =: P1_START_DATE
  and FINISH_TIME<>
  AND instr ("," |) REPLACE (translate (: P1_USER, '! @# $% ^ & * () _-+= {[]}] |------:; ~ ',' '),' ', "). ',', ',' || USER_NAME | ',') > 0
  OR (USER_NAME = USER_NAME AND: P1_USER is null)