Can I use an iMac 27 "mid-2011 in target Display Mode broken graphics card?

Similar Questions

• What can I use to search for a Microsoft has agreed to AGP Pro graphics card to make a visible improvement on my computer screen?

  I have an ASUS computer (actually it's a DIY chassis and motherboard ASUS with CD/DVD player and it is a real improvement over what I used, but I want to upgrade a NVidia 6200 AGPto graphics card of PRO for an improvement in Visual acuity and a cleaner profile.) Most computer retail online places like Comp-USA sell all these PCI cards and same NEW EGG does not list Pro AGP card. So while I'm looking I thought why not find a "Microsoft approved" AGP card?

  Hello

  Step 1: You may need to search the drivers updated through windows update.

  See: http://www.update.microsoft.com/microsoftupdate/v6/vistadefault.aspx?ln=en-us

  Step 2: otherwise, you may need to search for drivers by using your favorite search engine.

  DISCLAIMER of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• IMac 27 "mid-2011 as a destination display

  Is it possible to use an Imac 27 "mid-2011 as a destination with a PC as a source?

  A direct connection, no.

  The only solution is through Microsoft Remote Desktop Mac over a network

  or another form of VPN.

• I have an IMAC of mid-2011.  Can I connect a Mac mini to this iMac 2011 and use this monitor that has a built in processor?

  I have an IMAC of mid-2011.  Can I connect a Mac mini to this iMac 2011 and use this monitor that has a built in processor?

  You should be able to, given the Mac Mini has the correct connections (in this case, a Thunderbolt connection).

  Use your iMac as a display with the target - Apple Support Display Mode

• Can I use my imac 27 inches (mid 2011) as a second monitor for my new imac 27-inch 5K?

  Simple enough... I just want to know if my old imac can still be used as a second screen to my new imac 27-inch 5K.

  I have a thunderbolt cable to connect the two.

  Thank you

  Hi nomad2224,.

  Thank you for using communities Support from Apple!

  Whether or not you can use your old iMac as secondary screen for your new iMac (known as the target Display Mode) will depend on the model. You can find information and the steps in the following article useful:

  Use your iMac as a display with the target - Apple Support Display Mode

  See you soon

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse.

  My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse. It runs OSX Mountain Lion (not sure which version) and is a model 27 inches.

  have you tried to change the batteries in the mouse?

• can I use my iMac 24 inch as a monitor for a pc

  I need assistance with my Mac. I have an iMac 24 inches at the beginning of 2009 and its starting to bother me. Sorry, but I'm changing to a pc. I like to keep the iMac to a monitor. Is there anyway to use my iMac as a monitor for a PC.

  Sorry to be the bearer of bad news, but the answer is no. What you're trying to do is called the target Display Mode, Apple is extremely clear in the use of your iMac as a display with the target - Display Mode supported Apple exactly what iMacs TDM support.

  There is a solution, based on a Wi - Fi connection, but the performance is so poor, it is not even worth mentioning.

• Can I use an iMAc as an external display for Windows laptop?

  I will be working from home for some time and have received an old laptop Lenovo. The screen is quite small. Is it possible to use my iMac 21.5 "fairly new as an external display for your laptop?

  Thank you

  Kyle

  Sorry to be the bearer of bad news, but this is not supported. The feature you're talking about is called target Display Mode, Apple is extremely clear on what systems are supported in use your iMac as a display with the target - Apple Support Display Mode.

• Can I use an iMac as a PC monitor with a cable Thunderbolt?

  I have a Lenovo Thinkpad laptop computer with a bolt of lightning display port, I would be able to connect to a new iMac or iMac with the 5K retina via a cable Thunderbolt and target Display Mode to use it as a monitor? Thanks for the help!

  Sorry to be the bearer of bad news, the answer is no. Please read use your iMac as a display with the target - Apple Support Display Mode Apple is very specific to computers that will work. There is a solution available, but it is based on a connection Wi - Fi and performance is poor, not useful to examine same IMHO.

• In a wreath of two screens Thunderbolt, I could replace the first display with a (for example) 2012 iMac and use target Display Mode to power the two?

  My Thunderbolt screens have the possibility to be connected in Garland and get their signal on a single cable Thunderbolt, an iMac in target Display Mode should not also have this capability? Is an iMac in target Display Mode capable of simulating a Thunderbolt Display not only to get a video for himself but also for a Thunderbolt Display is connected?

  I've heard tell that some people used their iMac screen target with the target Display Mode while the iMac has been connected to another monitor (not a Thunderbolt Display).

  The result was that internal display of the iMac switched on the target Display Mode, but doesn't have the monitor connected.

  I haven't found someone who has tried this and published his experience with a Thunderbolt Display connected to the iMac.

  Unfortunately, a little more research would have responded and answered my question.

  Yes, I can replace one of the Thunderbolt screens in the chain with an iMac. Replaced screen should be one that is not directly connected to the mac of the source.

• can I use a mini ipad 4 (which has more cellular wifi) without sim card installed

  can I use a mini ipad 4 (which has more cellular wifi) without sim card?   I managed to update to 9.3.3 but the wifi keep disconnecting and lock the screen when I go to settings, Wifi.

  Yes, you can remove the sim card. The iPad will be only nag you about the missing card every now and then. But the sim card has nothing to do with wifi...

• Since I changed the Windows 7 32-bit to 64-bit operating system, I can't use Firefox browser except change the browser in safe mode.

  Since I changed the Windows 7 32-bit to 64-bit operating system, I can't use Firefox browser except change the browser in safe mode. When I start the browser is not open and it displayed a message
  Mozilla Crash Reporter

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; NET4.0C;. NET4.0E; InfoPath.3)

  Go to the address on: plant and tell us your last accident IDs. Then we can watch data specific to your accident and have a better idea of what is causing the problem.

  Given that everything goes well in safe mode, one of your extensions or themes is at fault. See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems to figure out which one of your modules is the cause of the crash.

  Start here: https://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes#The_problem_does_not_occur_in_Safe_Mode

• iMac 27 in bootcamp Windows 7 connected to an iMac 27 OS x running in Display Mode target

  The second iMac to just display mode acts as a mirror for the first Mac or is it a second doubling your horizontal resolution monitor? I want to drag the apps to a second screen when I do a Windows Dev work.

  target display mode do not work in windows

  a normal monitor connected to the thunderbolt port would allow you to extend the desktop on two monitors also in windows but it's my setup in OS x and windows7-8 - 8.1 - 10

• Work very well iMac 27 mid-2011 with 4MEM error code

  Hi, I have an iMac 27 inches, mid-2011 with 4 GB installed original (Elpida so-DIMM) so I improve it with 4 new 4 GB Kingston (ram value) KVR1333 PC3-10600 1333 Mhz DDR3 DIMMS for a total of 16 GB, after that my iMac works very well for three years with the daily use of any question and everything seems normal in "about this Mac" and in the "memory" tab no software issues no kernel panic , anything with a strange behavior, until three years after the upgrade memory, now I run AHT because the other reason (I can't work with a new MBP Mid 2012 airdrop both with El Capitan OS X) and it shows me a 64/4MEM/40000000: 0x8893cb98 error code, I reset the NVRAM and SMC, and same result AHT , so use MemTest86 from a V6.3.0 of bootable CD (full test upward at the end time spent 23 hours) and V4.3.7 showing no error in the two tests, also I ran mdsched.exe RAM Memory Sticks Checker windows (I have Windows 7 64 bit family Premium installed in bootcamp) and no ram detected error.

  While I should care that error? should I change my Ram modules?

  Thanks in advance

  You have a faulty memory card or the slot. That's what the error means generally. Make an appointment with the Apple Genius Bar for the service. If you need a Apple Store - find a store - Apple.