Satellite of U920T connecting to VGA projector

Similar Questions

• Satellite Pro U400 Win 7: flashing projector connected to Dynadock U10

  I have a number of Dynadocks U10 and Toshiba Satellite Pro U400 laptops.

  They are used to allow our teachers to move from one room to the other without having to connect and disconnect several cables. We use a vga connection to a projector for the external monitor.
  Everything worked pretty well until we put Win 7 on laptops.

  Now, at random intervals, the external monitor will blink.
  I tried the most up to date drivers and software found elsewhere in these forums.
  If I plug the projector directly into the laptop, the flashing stops.

  Can someone please help avoid losing me my mind completely.

  Thank you.

  > If I plug the projector directly into the laptop, the flashing stops.

  I think it means that the VGA of Dynadock pilot must be upgraded to Win 7 compatible version.
  There is nothing wrong in using a direct connection to the laptop, so I think there must be a problem with the driver Dynadock.

  The latest Dynadock graphics card drivers can be found here:
  http://www.DisplayLink.com/support/downloads.php

• Unable to connect by Satellite Z30 - A - 1 8 external projector

  Hello

  I have problems to connect to this laptop to an external projector.

  When I connect the cable, it recognize the projector and screen is displayed, but after 15-30 seconds, the screen goes black and computer keeps trying to connect again to projector and problem keeps when its connected.

  The connection to the projector is made hollow VGA cable with about 10 meters, I have tested on several other projectors with other cables and the problem persists.

  The computer is new and I have installed the latest drivers. What can I do to fix this?

  Thank you.

  Have you tried to use a shorter cable?
  Not very well but it might be possible that the problem appears due to the cable (10 m).
  That would you say, using a HDMI cable? Have you tested it?

  On the other hand I also recommend a graphics card driver.

  By the way: to switch between the internal and external monitor, you must use the Fn + F5 key combination.
  Note: If you use the simultaneous mode, you must set the internal display resolution to match the resolution of the external display.

• After the update to OS 9.2.1 connection of my mini iPad with a VGA projector no longer works... Any clue?

  After the update to OS 9.2.1 connection of my mini iPad with a VGA projector no longer works... Any clue? Thank you

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• HP Pavilion HDMI out how can I connect to the VGA projector?

  I have a new HP Pavilion with a HDMI port Tower Summit and no vga port. What do I need connect my led projector that has only a vga connection?

  Hi Akela2

  You want HDMI adapter / VGA for it:

  http://h30094.www3.HP.com/product/SKU/10464062

  http://www.Amazon.com/GP/AW/d/B007PLL4CK/ref=redir_mdp_mobile?keywords=HDMI%20To%20VGA&QID=1404334963&ref_=sr_1_2&SR=8-2

  http://www.Amazon.com/GP/AW/d/B007PLL4CK/ref=redir_mdp_mobile?keywords=HDMI%20To%20vga%20converter&QID=1402998960&ref_=sr_1_3&SR=8-3

  Thank you

• Satellite Pro C70 - could not get the image when it is connected to the projector

  This machine has been purchased for use in the classroom with projector and smart board. When it is connected to a monitor, the second screen works fine, but when it is connected to the projector DLP Epson, the computer screen and the projector are the two laptop PC empty of other manufacturers of work correctly when it is connected to the projector.

  Can you help me?

  Message has been modified: name of the laptop has been added to title

  What laptop do you speak?
  .. .and what operating system is preinstalled on this laptop?

  You use the pre-configured Toshiba system?

  Is the resolution of the screen for both devices (display and external monitor) set correctly?

• 4th generation Apple TV connected to the projector

  I have an Apple TV 4th generation connected to a projector with a Kenex of HDMI to VGA with Audio for the 4th generation.  Whenever I want to play Netflix or HBO NOW I get a black screen. I can only here the sound and I get a black screen.  It works fine when I use other applications.

  What can I do to fix this?

  I would really enjoy HBO NOW and Netflix with this number.

  I think that your card does not support HDCP on the HDMI connection, which is required by these suppliers copy protection. Because you want to convert it to VGA, this isn't surprising, because an enterprising hacker could extract the digital video stream. Most of these adapters are sold "educational purposes", not the home entertainment, and that's why. That said, if you look diligently, you can find a suitable adapter. The educational goal of the KENIMBENI is actually mentioned on the Apple store page http://www.apple.com/shop/product/H9139VC/B/kanex-atv-pro-x-hdmi-to-vga-adapter-avec-audio-prise supported, as well as a comment by the user that it cannot handle the HDCP.

• Satellite Pro U300 problem of monitor/projector ext.

  I shared the use of a Satellite Pro U300 and someone has messed with the settings I think. When connected to a projector and selecting Monitor 2 1 & 2 or just all get them is the default display of the blue projector. If I turn on monitor 2 what I get is an image of the desktop background but no program. What parameters are likely to have been messed up?

  Option extend the desktop to this monitor in display settings is enabled?
  If so, clear the check box and use the FN + F5 key combination to switch to projector only.

• Satellite L300-217 - connection to the Bravia KDL - 40EX503 LCD TV

  Can someone tell me what cables I need to do the above, I am a complete novice regarding this sort of thing?

  Thank you.

  Hi jonboy899,

  I have the Satellite L300 and there only VGA output port. Right?
  Also, I checked the features of your Bravia TV. It has a VGA input port.

  This means that you can use a VGA cable to connect your laptop to the TV. These cables you can get everywhere, and they are not expensive.

  If you are connecting, turn off both devices and then connect the cable. Turn on your TV and select the input VGA port. Then turn on your laptop and using FN + F5, you can switch between monitors. :)

• Recommended solution for Thinkpad Tablet and VGA projectors?

  I ordered a Thinkpad Tablet hoping to use it for a teaching tool, but I face a common problem: most classrooms (and indeed, most conference rooms for business) are projectors VGA.

  I know there are a variety of converters HDMI / VGA (using Active electronic components, of course), but I was wondering if Lenovo recommends a solution or if anyone has first-hand experience (perhaps with the Ideapad tablet, or perhaps with a review of the Thinkpad Tablet model) connect to a VGA projector.

  An extra (a little more specific question), it's the mini-HDMI output provides power to work something like the HP-HDMI-VGA connector. If not, are there drivers to support a USB output device / VGA (which are available for Windows, but uncommon on Android).

  Thanks in advance for comments or suggestions!

  The HP adapter works without external power supply with a warning: the output resolution is the native resolution of the Tablet, which seems to cause distortions on 4:3 monitors and slight overscan issues at least a part is watching 16:9. For my purposes (conferences mathy things), it seems it will work fine, although I will take a piece of chalk tomorrow just in case.

• 10 XPS for VGA projector

  Has anyone successfully found a way to connect the Tablet 10 XPS to a VGA projector/monitor?

  It seems the most likely option would be a mini-hdmi to vga converter, but I would like it confirmed that a person has obtained that it works before you buy anything.

  Thank you very much for your help!

  Chad

  Hello

  Welcome to the community

  Workaround will be mini-HDMI to VGA cable should be used to share the view of the table to any view compatible vga or a projector.

  Here's an example http://tinyurl.com/cq9l623

  Kind regards

• Connect to a projector option does not.

  Dear concerned,

  I work for an NGO, and we purchased licenses for Windows 7. Now, one day I'm in transition all computers from Windows XP to Windows 7.

  The problem I have is that on most of the PC like my computer laptop (Dell Latitude D610), Dell Optiplex GX 520, Compaq Evo D510 Small Form Factor option to connect to a project does not work. Earlier, these systems to connect with the projector when it had XP on them but since after Win 7 its does not work. Even in the resolution of the screen I can't connect to a projector or Windows + P option to connect to the external display.

  I have no idea how to solve this problem. Kindly guide me to get out of this problem.

  Kind regards

  Fahad.

  Your systems are quite old. There may be no Windows 7 graphics drivers for them.

  If you do not have Windows 7 installed for the graphics hardware that they will not work with a resolution VGA Standard and the conduct of the second monitors or projectors graphics drivers will not be possible.

• Problem with the resolution when you connect to a projector

  I regularly used my laptop connected to a projector via a cable VGA for PowerPoint and video clips view in Windows Media Player.   It is automatically detected and adjusted for different sizes of screen of the laptop screen (1366 x 768) and projector (1024 x 768) and projected with success.   Recently I connected the laptop to a second monitor - also 1024 x 768 - instead, and even once, it fits perfectly.

  It suddenly stopped setting for the resolution of the projector; When I go to the resolution of the screen, the option to set the resolution of the second screen is grayed out.   No matter if I use extend or duplicate, he insists that the two screens are 1366 x 768.   This has happened with two projectors, all two used to work properly.   I also tried different VGA cables.  The end result is that the image of the projector is hurry to tray.

  I can connect fine to the second monitor via the VGA port and sometimes with different resolutions for both screens.   I can also connect to a TV via an HDMI cable.   I can't try a HDMI cable for the spotlight as it is ceiling mounted, and the other is old and is not an HDMI connection.

  I checked the drivers and they seem to be up to date.

  My laptop is a Dell Latitude running Windows 7.   The graphics card is an Intel HD Graphics 3000.   I tried many suggestions already given on these forums without success.   The real puzzle is that it was working fine and nothing I can draw has changed except that I connected on the other monitor.

  Hi Tony,.

  Thanks for the reply with the status of the issue. I'm sorry to know that the issue is still unresolved, your efforts to solve this problem are much appreciated.

  I suggest to follow the method below and check if that helps:

  Method 1: Perform a system restore.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  System restore WARNING: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 2: Uninstall all hidden devices:

  Step 1: See the article below to activate the devices hidden in Device Manager.

  Look at a hidden devices

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  Step 2: After you enable hidden devices, remove devices from Device Manager.

  1. press start.

  2. type device manager in the start search box.

  3. Select Device Manager in the search result.

  4 uninstall everything that are grey also uninstall the drivers to display completely.
  5 restart the computer and install the drivers to view the manufacturer's Web site.

  Hope this information helps, just reply to the State of the question to get help.

  Hi Rizwan

  Unfortunately, I do not have a restore point old enough until the problem occurred.   I have not found any that was relevant in hidden devices, but in normal Device Manager mode when I clicked on "monitor" it opened a "Generic PnP" entry even when there was no extra monitor or projector fixed.   When an additional monitor has been attached, there were two of these entries.   I disabled them both, and I found that I can now adjust the resolution of a second monitor to a different setting of the laptop screen.

  Thanks for your help.

  Tony

• I use hyperlinks of Keynote, but they are not working when I connect to a projector AV. Any ideas?

  I use hyperlinks of Keynote, but they are not working when I connect to a projector AV. Any ideas?

  Hyperlinks don't work in the presentation on the projection screen, not 'View presenter' on Mac to display.

• Satellite L300 - 17L connected to LCD TV - screen is always black

  Hello

  I have a problem with my laptop.
  When I try to connect my laptop to the TV via the VGA doesn't work anymore. It worked great until a few days before, when I try to connect via VGA and my LCD TV screen remains black.
  So I thought that a problem with my video card driver, so I reinstalled Windows :)),: P, but the problem still persist.

  So I downloaded the latest driver for the video card, nothing new. I checked the cable, I tried with another VGA cable and same problem. When I connect the LCD TV to another laptop it works, if the VGA cable and TV work.
  And I have observed that when my laptop is connected to the TV, sometimes at an interval of 15 minutes it get signal, but this for less than a second, and then the screen turn black. (Each time when I connect the TV I give FN + F5 to set the main screen)

  Any suggestion, I have no more ideas.
  Excuse my English. : P

  I also think that the VGA connector can be responsible for this.
  This must be tested properly, so I recommend you contact nearest Toshiba authorized maintainer and ask for help.