can I use DAQmx programming instruments GPIB-USB?



Tags: NI Hardware

Similar Questions

  • How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?

    I want to integrate the ANSI C sample program ReadDigPort - ExtClk.c in my own big package.

    I want to use the internal clock of the BNC NI USB-6259 (.. 80 kHz 120 kHz).

    In the document:
    High speed M: Series Multifunction DAQ for USB - 16-bit, up to 1.25 MECH built-in BNC connectivity. / s,.
    is written:
    Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
    The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

    How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?
    With what other subsystem on the device can generate a source of the clock? How?

    It is possible to set a clock on an internal counter (for example ' Dev1/ctr0"):
    Creates channels to generate digital impulses that define the freq and dutyCycle and adds the channel of the task that you specify with taskHandle.
    DAQmxCreateCOPulseChanFreq (taskHandle, "Dev1/ctr0" units, clockName, idleState,
    initialDelay, freq, the duty cycle); works

    But it is not possible to drive this internal clock to a terminal (for example "/ PFI0/Dev1"):
    DAQmxErrChk (DAQmxCreateCOPulseChanFreq (taskHandle, "/ PFI0/Dev1", clockName, units, idleState, '))
    initialDelay, freq, the duty cycle); does not work: error DAQmx: measurements: type I/O of the physical channel does not match the type of I/O required for the virtual channel you create. Name of the physical channel: PFI0. Name of the virtual channel: clock

    The sample clock source can be derived from an external terminal (for example "/ PFI0/Dev1"):
    Sets the source of the sample clock, the sample clock rate and the number of samples to acquire or generate.
    DAQmxCfgSampClkTiming (taskHandle, "/ PFI0/Dev1", maximumExpectedSamplingRate, DAQmx_Val_Rising, ")
    DAQmx_Val_ContSamps, bufferSize); works. Acquire or generate samples until you stop the task

    But it is not possible to derive the internal counter of the clock (for example ' Dev1/ctr0"):
    DAQmxCfgSampClkTiming (taskHandle, "Dev1/ctr0", maximumExpectedSamplingRate, DAQmx_Val_Rising,
    DAQmx_Val_ContSamps, bufferSize); does not work. Error: Acquire or generate samples until you stop the task: make sure that the name of the terminal is valid for the specified device. See Measurement & Automation explore valid names of terminals. Property: Property of DAQmx_SampClk_Src: DAQmx_SampClk_ActiveEdgeSource device: Terminal Source Dev1: Dev1/ctr0

    Hi datafriend,

    using what it says is correct:

    Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
    The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

    This means that if you do not use an external signal as clock you can use the sample clock to HAVE it on board or at the output of the internal counter.

    There are also 2 ANSI C examples in this regard:

    http://zone.NI.com/DevZone/CDA/EPD/p/ID/4485

    http://zone.NI.com/DevZone/CDA/EPD/p/ID/4488

    So in both cases you have to use a fictitious task you need only for the generation of the internal clock (HAVE or CTR)

  • He says that I'm connected to the internet, but I can't use certain programs such as google chrome or ooVoo... Why?

    I am connected to the internet, but I do not know why I can not use some programs... someone please help me I am so frustrated!

    Hi Alejandrac_677,

    ·         What version of IE are you using?

    ·         What operating system is installed on your computer?

    ·         What happens when you try to access Internet Explorer, you receive no error message?

    ·         How long have you been faced with this problem?

    ·         You did it last changes before the show?

    Please see the following to find out about Internet Explorer, and operating system.

    Find out what version of Internet Explorer you are using

    http://Windows.Microsoft.com/en-us/Windows7/find-out-which-version-of-Internet-Explorer-youre-using

    What version of the operating system Windows am I running?

    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

    You can also check:

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

    Please provide us with more information about the issue so that we can help you in a better way.

  • My purchase is that creative cloud is a ° 16034007400 at the date of renewal, there was problems with the credit card, but the tax has been paid in January. So far I can't use the program or any of its components without Adobe me any explanation on why I

    My the purchase is Creative Cloud is a ° 16034007400 at the date of renewal there are problems with the credit card, but the deposit was paid to January. Up to now I can not use the program or one of its components without Adobe me any explanation on why I can not use.
    Why not allow Use Adobe Creative Cloud?

    : Contact support from adobe for hourly pst by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Why if I pay every month with my VISA card I can't use the program? Said THAT THE TRIAL has EXPIRED? and I pay every month!

    Por that TR pago my a my con mi tarjeta VISA no puedo use el programa?  Me as EL PERIODO DE PRUEBA HA CADUCADO?

    Why if I pay every month with my VISA card I can't use the program? Said THAT THE TRIAL has EXPIRED? and I pay every month!

    Telefono del servicio customer service numbers support Adobe tecnica in todo el mundo y

    País/región Attention to the client
    Norteamérica
    EE. UU. There Canada 800-443-8158.
    Europa
    Austria 6950071855 3 option
    BELGICA 027 119 960 3 option
    Dinamarca + 45 38 322 914 option 3
    Irlanda + 353 (0) 1 242 1552 option 3
    Finlandia + 358 (0) 969 379 671 option 3
    Francia 01 71 23 01 96 option 3
    Alemania 6950071855 3 option
    Italia 02 6 968 2817 option 3
    Countries Bajos + 31 (0) 20 201 3331 option 3
    Noruega + 47 23 16 28 81 option 3
    España 900 810339 option 3
    Suecia + 46 (0) 858 536 692 option 3
    Suiza 18009581 3 option
    RU + 44 (0) 207 365 0733 option 3
    Asia/Pacífico
    Australia 1800 614 863
    China 58657700 010
    Hong Kong 30714922
    India 0124 4003810

    000 800 440 1751 Indonesia 001 803 447 361 on 03-5350-0407 Corea 02 563 2555 Malasia 1 300-80-0027 Nueva Zelanda 0 800 485 948 Filipinas 180014410440 Singapur 800-448-1642 Taiwan 0800-666-536 Tailandia 001 800 441 8813 Otro + 632 636 8450 Latinoamerica Argentina 0 800 444 0290 Brasil 0800 8921704 El Caribe 206-675-6100 Central America 206-675-6100 Chile 1230-020-0109
    206-675-6100 Colombia 01 800 5 1 80102
    206-675-6100 Costa Rica 0 800 011 0910
    206-675-6100 Mexico City 001 800 249 1039
    206-675-6100 Sudamérica 206-675-6100 Venezuela 206-675-6100 Africa South Africa + 44 (0) 20 7365 0733

  • can I use labview 8.01 whit usb device 6009 with vista home

    can I use 6009 with labview 8.0 and Windows Vista home OS usb device?

    LabVIEW 8.2.1 is the first version that is compatible with Vista. While 8.0 could operate, NOR offer any guarantee.

  • Cannot close My Documents, the window keeps reopening and is always in the foreground, can not use another program

    I have a serious problem with windows Explorer. It keeps opening in 'My Documents' and it is impossible to close. I can close it but it immediately reopens seconds - not enough time to click anywhere else.

    It is also blocked in the foreground so that I can't use any other program, the cursor will move immediately to My Documents as the active window. I can't even go to start - run - or Start - logoff or anything because as soon as I click anywhere on the active window is new my documents.

    I don't know what happened, but I think my 1 years pressed a weird combination of keys while she was playing with my laptop. It is not a virus, because I ran a full Kaspersky scan and everything seems fine. Everything works fine in safe mode as well. It's only when I go in the "unsafe" mode I have this problem. I tried to watch the registry key as he pointed to similar problems on these forums, but I can't find a userinit registry key. What can I please?

    Hello nikitaghosh,

    I know that you have performed a comprehensive analysis of Kaspersky and nothing came, but have you run any malware removal software?  I've included a link for the removal of malicious software below, please let us know status.

    Microsoft Answers:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/antivirus-2010-removal-the-virus-is-blocking/36d884f4-5fcc-46E9-9F27-cf189c131608

    Thank you

  • I have a product code 27 Omni A5W90AV #ABA. Can I use a second monitor via USB 2.0 or USB 3.0

    Question: Can I use a USB 3.0 or USB 2.0 port to connect a second monitor. Product code 27 Omni A5W90AV #ABA doesn't have a VGA or HDMI output.

    Yes, you can use a USB-to-video adapter to the output of an additional monitor. The EVGA UV plus + 19 is one of the many devices on the market that will do what you want.

    Frank

  • Can I use the program creator-CD came with my laptop on the job?

    Hello!

    I have a Compaq 6530 b with XP Proffesional.

    I've had this laptop through my work about 4 years ago. CD-Creator program that followed is called 'Creator Business DVD' and is Roxio/Sonic. I've used this program in my work, but when I read today the license agreement, it says that there are three types of licenses, and I wonder who the license that accompanies my computer and how do I know?

    Because if I only have a license "singleuser", it seems that I can only use it for personal and non-commercial use.

    I would be very grateful if someone could help me find it.

    Creator Business v10 DVD
    Versjon: 10.1.048

    The software is certainly correct to use for your job. Especially in cases where it is simply to facilitate your work. I, of course, am not a lawyer, but my understanding of the license agreements, you are in the clear. As long the software is not used to make personal financial gains copied/redistributed, or can be used by other people that you shouldn't have to worry about what. The software is designed as a tool to help you finish your work, but never as a means for direct profit; that is create/copy software, music discs, DVD, etc... For absolute certainty are trying to contact Roxio on this issue because I can honestly say I don't have a full understanding of their terms and conditions, but also if you register the product you should be able to get more information on their Web site.

  • I have a problem with the payment: (why charge me 44,99 EUR (cost 61.99 euros) then block system and I can't use the programs :(

    I have a problem with the payment why charge me 44,99 EUR (cost 61.99 euros) then block system and I can't use programs

    Please click Accounts & billing link here https://helpx.adobe.com/contact.html to have a conversation with our billing support team.

    Thank you

    Stéphane

  • picked up a photoshop cs3 to a succession of person who typed in the serial number passed.i and wrote its already registered.can I use this program.will it wirk.thanks, mike

    Picked up a photoshop cs3 to a person who has died. I typed the serial number in and says its already registered.can that I use this program.what do, I have to do.thanks, mike

    You may need to transfer the license, transfer an Adobe product license

    [moved from Creative cloud download & install download, installation, commissioning]

  • I have photoshop elements for my windows computer. I recently bought a mac, can I use my program even or do I have to buy a new one?

    I have photoshop elements for my windows computer. I recently bought a mac, can I use the same program or do I have to buy a new one?

    Impossible to use the same program because there are different versions for Windows and Mac.  But you might be able to use the same license - he can count on what version you have.  Older versions used the same serial number to use on each platform, while the most recent purchases are generally for one platform only unless you specifically buy a cross-platform license.

  • I'm new and want to do voice overs and read books, how can I use this program?

    How to use this program to save books?

    Your question one sentence would require a huge response.

    I suggest the him starting point would work through the many excellent tutorials on using Adobe Audition, from beginner to expert.  One together are: CC Audition tutorials | Learn how to use Audition CC

    However, I must say that, before arriving even at the hearing, you need to think about things like the acoustics of the room you want to use to save, your choice of MIC and audio interface.  Get all these law will go a long way to make your professional recordings.

  • LabVIEW can be used for programming of the Texas Instruments MSP430 microcontroller for applications of sensors?

    I want to ask how can I configure msp430-rf2500 after installing the visa drivers (Device Wizard). I m not getting the data from the msp430-rf2500 while I m get this data into the hyper terminal. Please guide me!

    Hello

    If you are able to read the data in hyperterminal, and then you will be able to read in LabVIEW. Have you looked at the basic reading and writing VI series in the examples? If this isn't the case, it would be a good starting point.

    Make sure you have good flow baud rate, the port COM etc.

    Also, will not be able to use the COM port while it is used by hyperterminal - please close hyperterminal and then use LabVIEW LabVIEW.

    If you've tried all this, your postal code so that we can help you

    -CC

    p.s. the button clicked the 'Me Too' by chance - I blame not having is not a cup of tea this morning!

  • Windows defender downloaded windows update now I can't use a program called vintrilo

    need to get the vintrilo to allow windows Defender to allow this program

    Hi Cubbies12,
    Welcome to the Microsoft Answers site!

    1. What is the exact error message when you open Ventrilo?

    2 have you installed updates through automatic updates?

    3. do you have installed the update manually?

    4 is the only update or is there other updates as well as windows Defender?

    5. is sound does not completely work?

    Add exceptions to windows defender and see if it helps

    1. open windows Defender

    2. click on options toexclude files and folders

    3. click on Add and browse ventrilo (so that it does not analyze the ventrilo windows)

    Follow the steps below to check if the Microphone is properly configured and enabled in Vista.

    STEP 1
    Test for an audio signal

    1. click on Start, then Control Panel.
    2. click on hardware and soundand then click manage audio devices...
    3. click on the recording tab.
    4. to test the microphone, speak into it. To test the line, send a signal to the line at the port of devices audio source (press play on the audio player). Look at the gray bars next to the name of the device under the recording tab:
    * If the gray bars next to the device name turns green, this device is active and an audio signal is passed through the microphone or line-in port. This step shows that this problem is related to sound parameters in the software that uses the microphone. If you have not already done so, set the device selected by default and adjust levels. Once the device is set by default and levels are defined, use and adjust the sound recording or voice carrying software.
    * If the gray bars remain inactive and grey, the device does not have a signal. Leave the record open tab and go to the next step.

    STEP 2
    Update the audio drivers
    You can see a front-end port microphone does not work, a recording device is missing in the recording tab, a microphone is not recognized when it is plugged in, or any other problem. There may be updates audio drivers that can solve this kind of problem. Use the following steps to ensure that the audio drivers are up to date.
    1. connect to the Internet.
    2. click on start and enter the Device Manager in the start search field.
    3. click on the plus sign next to sound, video and game controllers.
    4. right click on the name of the sound material and select software update of the driver...
    5. click on search automatically for a driver updated and wait for Windows to update the driver software.
    6 Windows checks a remote Web site to see if the update of the driver software is available.
    * If an update is available, let Windows install the update.
    * If an update is not available, proceed to the next step.
    7. once the update is successfully installed, test the microphone or line like that was made in step 1. If the problem persists, proceed to the next step.

    You can also browse the links for more information on ventrilo and try to contact them if the problem persists.
    http://www.Ventrilo.com/FAQ.php
    http://www.Ventrilo.com/about.php
    http://www.Ventrilo.com/dlprod.php?id=1

    Thank you and best regards,

    Bindu S Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think

Maybe you are looking for