Can I use my Satellite P10 as Access Point?

Similar Questions

• The Torch 9800's BlackBerry Smartphones Can be used as a mobile Wifi access point

  Hello

  I just got a Torch 9800 with a great data plan; Anyone know if the phone can be used as a hotspot Wifi for a PC?

  N ° the Torch 9800 can't be upgraded to OS 7.1, which is the oldest version of the OS with function Hotspot Wi - Fi.

  I hope that helps you.

• I can't start with Satellite P10 by pressing the power button more

  I can't start my Satellite P10 by pressing the power button more.
  Sometimes, very rarely its starts when I hold the power button for a while say 10 seconds.

  I tested the power supply and a battery to my friends P10 (of the same type) and both work very well.

  So it must be a problem with the key.
  No idea what to do?

  Thanks for any help

  The best.

  Tobias

  If it s a button or a power supply electronic problem, then you can't do anything.
  In this case assistance by the technicians of laptop would be necessary.

  But the next time that you should try this option if the laptop turns on not;
  Remove the battery and unplug the AC adapter from the laptop for about 30 min.

  After this short period of time to reconnect the two parts and check if the laptop could start.

  Good luck

• I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet.

  I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet. It happened suddenly and with no warning or cause. I tried to turn off the modem for 10 seconds and turning it back on, but I still had the same problem. What should I do? Help, please.

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How can I recover the Satellite P10

  Hello

  I intend to do a clean reinstall of my Toshiba Satellite P10 series.
  I have the disc that came with the computer, IE.

  Microsoft Works and two disks mark product recovery CD. Is this all I have to do a re-install and what order you use the disc?

  As you can gather, I've not done this before and I wonder if I should consider an expert any advice would be appreciated.

  Dave was soon

  Hello Dave

  All you need are the recovery media. Launch the procedure of recovery using CD 1/2. ;)

  Expert installations using mode, you can create your own partition (C), or you can install the OS on already created partition C. recovery CD contains recovery image and this image contains following components:
  1 operating system
  2. all drivers
  3 Toshiba has designed tools and utilities
  4. different software

  I don't know what you want to do exactly, but if you want to create a clean partition please check this topic http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2513

  If you need more information please write again.

• I need to access sites that require adobe flash player on the iPad.  What can I use to allow me to access?

  I need to access sites that require adobe flash player on the iPad.  I can access these sites on my imac with adobe flash player then why not on my ipad.

  What can I use to allow me access to these sites, which are for educational purposes for my grandson to allow him to do his homework?

  While you can get Adobe Flash on the iMac, you can't be on the iPad. There are some browsers in the App Store that will emulate flash, I think that one of them is atomic, or something like that. Do a search on the App Store and you should find something.

• What memory can I use for Satellite L20-100?

  Dear Sirs,
  Please, help me to understand what type of bars of memory is compatible with satellite L20-100?

  on your site I found the description only for L20 - 101 -.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=107212
  -
  and it is this:

  Standard system memory: 512 MB
  maximum scalability: 2 048 MB
  technology: DDR2 RAM
  expansion module sizes: 128, 256, 512, 1 024 MB

  but on different sites, I found this module maximum expansion size = 512 MB

  and in the instruction manual (pdf-Russian) they say that the module is DDR instead of DDR2!

  which one should I buy?

  This is a appropriate:
  Kingston DDR2 512 MB PC-4200 (533 MHz) SO-DIMM KVR533D2S4/512
  200 pine?

  I can even use but 1024 MB?

  Hello

  Well, I think that it should be possible to upgrade the memory to 2 GB (2x1024Mo)
  I also found a site of memory module very useful:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=20683&ft=m&St=3

  and according to this site, it should be able to use the 200-pin-DDR2-533 modules SODIMM

• Cannot connect by Satellite L300 wireless access point

  I have a new laptop L300 & I can't connect to the laptop to my wireless access point. I have an another mobile E-sytems with the same hardware Realtek RTL8187B & it connects without problems.

  The machine has the free two month Mcafee subscription & I have disabled all the protection incase that was causing the problem. I updated the driver for the wireless card & the bios on the Toshiba site, but nothing is.

  Can someone shed light on this problem because the laptop is only two weeks old?

  Thank you...

  Hello

  To connect the laptop to the WLan, it must ensure that everything is enabled and configured correctly.
  You should check these points:

  -activated the WLan with the WLan switch and the FN + F8
  -don t use any 3rd party config tools WLan if you use the WLan configuration options own Vista
  -for the first test WLan disable the security settings of the Wlan router
  -configure settings to laptop as good SSID and search for your wireless local area network
  -After that the laptop is connected to the WLan router, you can turn back the security settings (encryption, mac address filtering, firewall, etc.)

  Welcome them

• Use E2000 as ONLY - wireless access point not as a router

  I would use my E2000 router as an only Wi - Fi access point. The unit will be connected to a unit of combo modem/router Verizon FiOS Actiontek I want to leave only the first and only router on my network. Can the E2000 cause its router functions disabled without DD - WRT or other third party firmware?

  Thank you!

  Yes, but you need to connect a cable between the router to the AP, here's how

  Editing cascading (connecting) a Linksys router to another router

• How can I get my name from the access point?

  Since I bought a modem Arris 228 G and spent my 2 wireless, printers Canon WIFI unable to connect at Optimum!

  Canon said to contact my router creator (Apple Airport Extreme) for the name of the access point get return wireless, WI - FI printers.

  Help, please.

  W.W.

  (Mac Pro 10.6.8)

  The name of the access point is simply the name of the wireless network that provides AirPort Extreme.

  You can see the name of your wireless network by clicking on the WiFi icon at the top of the screen of your Mac and by checking that the name appears.

  

  There will be a check mark next to your wireless network name.. which is also known as a wireless access point.

  It would be the same name that you had before... unless you have changed some settings on the AirPort Extreme.

• do not use Iphone 4 as wifi access point

  I have an Iphone 4 with a 3G plan I have successfully used as Internet access point in several books.

  My main laptop is a Sony Vaio running Windows 7 Professional; in the past access Iphone used to work on this computer, but no more. Although the Iphone appears as an available wireless network, the Internet connection with it failed. This problem has been like this for over a year.

  Hi Edecunha,

  Welcome to the community of Microsoft and thanks for posting the question.

  I suggest you to contact the Apple support for assistance

  http://www.Apple.com/support/iPhone/contact/

  Hope this information helps.

• Can I use VM 2nd NIC to access target on the storage network?

  I'm running ESXi 4.1 on an isolated network iSCSI network storage with 1 NIC physical on the management network, 4 physical network connected to the Production network interface cards, and 4 NIC physical and all my VM is Server 2008 x 64. Until the budget will allow, without my actually are Dell PE 2900 of servers running Windows Server 2008r2 and Microsoft iSCSI Software Target 3.3 with various sizes of PowerVault DAS, which is 15 to. Here's my question regarding this configuration. The environment in which I work in requires the use of an application that needs the access card to a server that has more than 10 TB of structured of maps and images. For the sake of future growth, I decided to go the normal way of iSCSI target as opposed to sharing/server configuration, so I created a 14.5 TB iSCSI Target .vhd and all my data have moved to this location. In addition, I have one of my servers iSCSI Initiator pointing to the target VM (exported snapshot)... through my network of production... where it is mounted as a read-only disc, configured as I need to be and spread my desktop map. This configuration works well, but the fact that my VM accesses the target via my production network is certainly not the way I need it to be installed, I really need to access the network storage iSCSI initiator. Confused yet? I really need to keep my out of the Production Network iSCSI traffic, but so far I have not been able to find a method to add a second NETWORK card on my virtual computer and put it on anything other than the VM network. I have no problem at all with my host ESXi accessing iSCSI target data warehouses that I created on my other AD, but obviously, there are enormous obstacles to the creation of a 14.5 TB data store, while a 14.5 to SAN target is very flexible and easy... now how can I shoot by the storage network team.

  I appreciate the answers really, but I'm composing this House as VMWare communities are blocked on my work network. However, given that the responses are also sent to my email... I will receive them as text and therefore all references to added images etc will have to wait until I get to watch. Answers appreciated text.

  Thank you

  Confused yet?

  Yes, absolutely

  I don't know if your configuration iSCSI in detail, please consider my suggestion carefully. Access the iSCSI virtual machine network directly should be as simple as adding a group of ports 'Virtual Machine' to iSCSI vSwitch and adding another virtual NETWORK card on the computer virtual - attached to the newly swanky group harbour - with an IP address in the range of iSCSI.

  André

• Which module WLan can I use in Satellite Pro A10 PSA15E

  Hello.

  I have a Toshiba Satellite Pro A10 PSA15E-09VYL-en and want to add a module internal wireless - any ideas I need one and where?

  Thanks in advance,

  Simon

  Hello

  I discovered that this WLan module can run on your laptop Satellite Pro A10;
  LAN (802 11b Agere) PA3212U-4MPC or PA3273U-2MPC card wireless (802. 11a / b).

  The upgrade of WLan is not very sensitive. There are two antenna cables which must be connected to the wireless network card. The white cable be connected to the hand and the black cable to the auxiliary voltage

  Welcome mate

• What Toshiba SSD can be used for Satellite U200

  Please could you recommend me a * Toshiba * SSD for my laptop satellite U200.
  You need 120 or 128 GB.

  It would include a migration (for example Acronis) tool to copy my HDD (80 GB) to a new SSD?

  Thank you!

  I guess most of the SSDS that support the SATA controller/interface would be compatible and should operate within this U200 series.

  But you won't get readers full SSD performance as most SSDS are faster than the speed of my HARD disk controller support.

  I assumed that the device supports common SATA I (150 MB/s) controller. The SSD supports SATA III or SATA II (300 MB/s). But SATA is compatible to the bottom. Therefore, you should be able to also use the disks SSD SATAII/III

• Can I use my Satellite C660 - 2 7 backlit keyboard?

  Hi all

  I was wondering if there is such a thing as a backlit keyboard which can be adapted to the Satellite C660 - 2 7, the old one is very easy to remove.

  As far as I know you can't do that. Connector for these keyboards is quite different.